Video Scrambles on new install
I just did a clean install of winXP pro on my 865pr system. I have a P4 2.4 800, 2 sticks of Geil pc3200 512 mb ram and a radeon 9700 pro aiw card. The first time i installed the new omega drivers for the radeon card and while i was installing service pack1 for xp my system crashed. After rebooting, and i enter windows, the whole screen is scrambled, completly illegible.
Safe mode is affected as well, so i repartitioned the drive and reinstalled windows, now it happens as soon as windows loads.
I do hace a previous install of winXP on the other partition and that is affected as well.
Is my video card shot? I have all the defaults loaded on the mobo and have shut off HT.
Help!
Sounds like the card might be damaged, but it might only be overheatink so make sure the heatsink is fitted tightly on the GPU core.
It could also possably be the board or a weak power supply so you have a few things to test out.
Similar Messages
-
New Intel video driver won't install
The new intel video driver won't install on my T410. Anyone else having the same problem? All I get is a Turbo Boost installation box. The intel video driver version doesn't update. I've tried manually installing via "update driver", but windows says that I already have the newest driver (even when i only have 8.15.10.2202).
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74433
Win 7 Pro x64
T410 2516-CTOIt could be a typo.
http://download.lenovo.com/lenovo/content/ddfm/MIGR-74582.html#video
that shows what you have to be the latest.
After looking at it again it is a typo. It shows .2202 until you bring it up, then it shows .2253. I will let the admins know, ty for pointing it out.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers! -
Problem with a new install: X, Radeon 4650, and xf86-video-ati
Hi guys,
I am trying to setup a new install here but am getting stuck at X (I have been following the beginners guide).
Everything is stock (kernel, not [testing], etc.).
I have a ATI Radeon HD 4650 and am using the xf86-video-ati driver. I want to use dual monitors with this card (one 1920x1080 and another 1680x1050), but as far as I can tell, this is not the root of the problem. KMS is enabled by default and works well (with the exception of some slight artifacts on the 1080p monitor). I have tried to disable KMS but to no avail. But here is the essence of my situtaion:
Note: Yes, hal & dbus are both running.
Running X as root without Xorg.conf: Mirrored at 1680x1050
Running X as root with Xorg.conf: Black screens
Running X as normal without Xorg.conf: Mirrored at 1680x1050
Running X as normal with Xorg.conf: Black screens
Note: The Xorg.conf is being taken from X -configure as well as taken from Xorg.0.log
My /var/log/Xorg.0.log can be found here: http://pastebin.ca/1877044 (after attempting to run X as a normal user without Xorg.conf)
Why can't I use a xorg.conf? How can I setup dual displays at their native resolutions?
Thanks, any help is greatly appreciated!oh boy ...been in your exact situation before. I have a radeon 4890 HD. Very easy to get running the way you want it, once you know the steps to take of course.
btw, I've ALWAYS found it easier to run X with an xorg.conf file.
The way you go about setting up a dual head radeon card is actually very simple.
First, delete your /etc/X11/xorg.conf file if you have one.
Second, run "sudo aticonfig --initial=dual-head"
Third, make sure the fglrx module is mentioned in your rc.conf file under modules.
aticonfig will then create a new xorg.conf file for you that will work with your dual head.
A few tweaks to the xorg.conf file before you start x:
Decide whether you would like to run Xinerama or not. Xinerama may or may not have any benefits, but I've had much more success by keeping it off.
You do that by:
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Make sure 'Load "dri2"' and 'Load "dri"' are commented out under section 'module'
Lastly, specify your display size under Section "Screen" (you should have two screen sections)
Do this by adding Modes "1920x1080" under each SubSection "Display" .... or just take a shortcut and put it under the last subsection like I did.
Do it again for the your other screen section.
You are going to make a "virtual" screen, which would exist if your two physical screens were joined into one big one.
So put under your second "screen" section, Virtual 3360 3360 (I have two 1680x1050 monitors)
attatched is my xorg.conf for clarification:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "dri2"
# Load "dri"
Load "record"
Load "extmod"
Load "glx"
Load "dbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "1680 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # <i>
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV790 [Radeon HD 4800 Series]"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP2" "0-DFP2"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3360 3360
Depth 24
Modes "1680x1050"
EndSubSection
EndSection -
Detecting Video Capture Devices without Installing JMF
Hi All,
I want to detect the video capture devices, without installing the JMF.
I had included the jmf (windows version) in lib path in netbeans ide. I am able to detect the audio capture device. But unable to detect the video capture devices. But if I install the JMF, I am able to detect the Video Capture devices in My system. Can anyone help me?
Thanks,
Vinoth Kumar.YES! Please take a look at SIP Communicator project. They have all what u want.
The main idea is copy all .dll files to System or System32 (Please check files which JMF will copy to ur computer and where).
U need to have jmf.jar and sound.jar too ( maybe more) in your computer.
Your program should have DirectSoundAuto.java, JavaSoundAuto.java, JavaSoundDetector.java, JMFInit.java. Those files are in JMStudio source code. They are used to detect all capture devices and register it to JMF, but wait !!! where they will be saved? In order to save information about capture devices which are detected, you should create "jmf.properties" file in the same location with jmf.jar.Therefore, u should modify the JMFInit.java so it can check if the "jmf.properties" exists. If it's not, you have to create it.
Check SIP Communicator at Folder "media" then "device". They have modified those files I mentioned above and created some new files to SC can detect more devices.
Edited by: tamngminh on Sep 16, 2008 9:50 AM -
Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?
Did you install Flash Player?
http://get.adobe.com/flashplayer/ -
New install help. Please and thanks!
I'm hoping somebody can tell me what's going wrong with my new install. Here are the details:
Win7 pro
i7 950
Quadro 4000 (with massive cooling blowing on the thing)
mxo2 mini max (because I'm slightly cheap, and yes, I feel a little like a hack plugging RCA cables rather than XLR for audio)
24g ram
Gtech 4tb graid
2 internal SATA drives (one boot, the other for utilities like tone, graphics I use often, etc.)
Software:
PremPro (AE, AME, etc) 5.51 (haven't updated to 5.52 - problem here?)
Squeeze 7
Trapcode plugins
Drivers:
NVidia: 276.14 (this is the Adobe approved one, at least so the download site said)
Matrox: mtxutils_551
So here are the issues:
--> Code 7 errors while editing a long program ("Open GL does not meet min specs for application"). Before this happens, generally premiere will become unresponsive, program screens will go black and then boom. On this program, I can get about 6 edits in before it blows.
--> Cannot export long program (2+ hours). (Matrox 1080i sequence - footage all P2 DVCPRO HD) Crashes after transcoding approximately 15-20 minutes of program. Exporting to Graid where project and footage is stored (is this an issue?) Premiere crashes and computer restarts. Tried many different export settings, from "match sequence settings" to Premiere's mpeg2 setting, to the Sorrensen and the Matrox ones.
(Adobe Tech support and a very nice guy named Vinay helped me with a small workaround which involved opening up a hidden admin login, and disabling some Microsoft services and exporting to my spare internal drive)
--> Also tried importing sequence directly into Encore and AME then transcoding through those. No luck there.
--> Premiere Pro on closing gives error message "Premiere Pro has stopped working; appcrash exception code 00005. Also, this is occasionally followed by a Visual C++ runtime error
--> Capture plugins from Matrox are unavailable. No Matrox capture settings are available.
--> No WYSUWYG control panel for MX02 (I know this is an Adobe site, but figured someone might have some insight maybe)
So there's the beginning. There are more, but these are the biggies at this point.
Thanks a million. I'm a very busy one man shop and sincerely appreciate any other busy people taking the time to give me some input on this.
ShaunnThanks Jim. Yeah, that was my suspicion as well. Right out of the box their damm plug-ins didn't install correctly, and it takes roughly a week to get familiar with all the "known issues" - a phrase that irritates me to no end - (if there are known issues - FIX EM before you sell me your s*%t! Can you imagine delivering a project to a client with a 14 page list of "known issues"?!?!? Seriously!)
There was a point where I really loved my Matrox products back in the old Digisuite days. But there was this point where their world class tech support policies changed, and frankly it seems that was the point where the whole company became hack. I was pretty skeptical about buying the mxo2 in the first place because of this, allowed myself to be "sold" because I needed to get back to work quickly, put the problem out of my mind and get back to work...and now I'm dealing with this.
Thanks for the link. I think you're right, it would be nice if Adobe would address monitoring through a gpu. But I'm guessing that won't be until CS6.5, by which point we'll all have to paying Adobe a monthly subscription vig to use their products. This crap irritates me to no end. I would love to see a reasonably priced and robust editing system that works like a hammer. I'm a busy 2 man shop - I gotta pound my video nails quickly and get on to the next house.
Assuming I get rid of matrox...what's the best current solution for monitoring? Doesn't sound like Aja or Blackmagic have any better solutions.
Shaunn -
Watching online video on a new Intel-MacBook
I am unable to watch online videos on my new MacBook. The windows media player alarm comes up telling me I don't have the right plug-in. I believe that is the Quicktime component add-on. This still doesn't work. How can watch online video (like cnn.com for example) on my Intel MacBook?
The intel flip4mac beta is no longer available so you can't use it.
Therefore install windows media player from http://www.mactopica.com
You could then force safari to open under rosetta and the windows media plugin should work. -
Kernel Panic with new install of Leopard
messed up my setup fooling around with "sudo" commands. d'oh. trying to do a clean reinstall from the Leopard dvd but get kernel panics....any help? tried the dvd on a macbookpro and it boots up fine so the dvd seems to be ok...
here's the panic log:
Sun May 17 19:07:08 2009
panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x8d8d3373, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000018, CR3: 0x00e01000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x0c7ff004
CR2: 0x00000018, EBP: 0x8411fbc8, ESI: 0x0c94c800, EDI: 0x0c94c800
EFL: 0x00010246, EIP: 0x8d8d3373, CS: 0x00000008, DS: 0x0d650010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x8411f9d8 : 0x12b0e1 (0x4555b4 0x8411fa0c 0x133238 0x0)
0x8411fa28 : 0x1a7bed (0x45e568 0x8d8d3373 0xe 0x45dd24)
0x8411fb08 : 0x19e517 (0x8411fb20 0xce96b80 0x8411fbc8 0x8d8d3373)
0x8411fb18 : 0x8d8d3373 (0xe 0x48 0x10 0x10)
0x8411fbc8 : 0x8d8c2540 (0x0 0xce96b80 0xc94c800 0x1)
0x8411fc08 : 0x7b196139 (0xc94c800 0x1 0x0 0x13)
0x8411fc68 : 0x7b18f940 (0xc94c800 0x2507 0x8411fd2c 0xc94c800)
0x8411fc98 : 0x40c515 (0xc94c800 0xd1ea6b8 0xd1ea6b8 0x0)
0x8411fce8 : 0x437535 (0xc94c800 0xd1ea6b8 0xd1ea6b8 0x0)
0x8411fd48 : 0x18c8aa (0xc94c800 0xd1ea6b8 0x0 0x0)
0x8411fdb8 : 0x12d165 (0xcfac278 0xd018590 0x8411fdf8 0x11ee04)
0x8411fdf8 : 0x126247 (0xcfac200 0xc749420 0xcfc17f8 0x0)
0x8411ff08 : 0x196afc (0x8411ff44 0x0 0x0 0x0)
0x8411ffc8 : 0x19eb34 (0xcd2bfc0 0x0 0x10 0xcd2c8c0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff378
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0x8d8bf000->0x8daebfff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x7b1ae000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x7af10000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x7b187000
com.apple.iokit.IOGraphicsFamily(1.5)@0x7b187000->0x7b1a2fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x7af10000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)reinstall the original video card to install leopard
That should work fine. In my case, that wasn't an easy option because the Mac arrived from Apple with the upgraded card in place and my client would have had to buy a video card just to install the OS.
It's been years since I had a version of MacOS that required inits for specific machines. It caught me by surprise, but was totally understandable. The machine was made after Leopard was released and it did come with a proper DVD with the required video drivers, but my client had misplaced it. His Family Pack Retail DVD was the version of MacOS that was on the shelf at Amazon at the time and normally this isn't a problem for anyone because they are always out-of-date and require the user to bring up the OS to the latest version.
I suppose Apple replaced the DVD with an newer version because of the special order status of the machine. -
Intermittent crashes on new install
Hi,
I am seeing intermittent crashes on a new install of Arch.
I see different messages on crash, quite often
INFO: rcu_preempt_state detected stalls on CPUs/tasks:
also
BUG: Bad page map in process bash
and other processes.
sometimes:
CPU: 1 PID: 1 Comm: shutdown tainted
I am vague here in the specific messages because it's not always the same and partly because I usually lose the logs due to hard restarting the machine.
I realize that the information here is somewhat lacking so I don't expect a magic answer to solve the problem. I am looking for advice on where to go from here to try and get it fixed.
The system seems normal most of the time then crashes without warning. When it does happen it will almost certainly get stuck at what seems to be the very last stage of shutdown (that is if it allowed me to use the shell). It might or might not go wrong after reboot then.
I've done 2 cycles of test using memtest, both passing.
Any advice? Could a faulty hard drive possible be the cause?TheSaint wrote:How much big is your RAM and swap ?
Perhaps you may add one more swap file, for testing purposes.
I suspect the most problem starts within swapping. You may look at this for references.
I've 4GB RAM and another 4GB swap partition.
I've tried using swapfile instead of the partition already to no avail.
I've also played with the swap performance settings, again, to no avail.
I've some more information to add now:
I left the system on last night and using it normally to see whether the hard drive replacement actually fixed the crashes (assuming the swap issues were separate). After 24 hours and some fair use, I was optimistic that the drive was in fact at fault. I then made some changes to a smb.conf file and restarted using:
sudo systemctl restart smbd.service
The systemd returned with an error saying smbd failed to start. I checked the logs and smbd reported a segfault. I try again several times, leave it a few minutes and try again (having reverted to the last working smb.conf), segfault still occurs. I then checked "free -m" and noticed that the memory is mostly unused but the entire RAM is used for cache (which I guess is normal anyway). I then cleared the cache:
echo 3 | tee /proc/sys/vm/drop_caches
and immediately I was able to restart smbd.
A few hours go by and I do some rsync'ing to a CIFS mounted share. Partway through I get the following:
Jan 15 18:17:01 engserv sudo[7859]: sth : TTY=pts/0 ; PWD=/mnt/smb/share2 ; USER=root ; COMMAND=/usr/bin/rsync --info=PROGRESS2 -a /mnt/smb/pc1/Proj/All/ /media/data/Proj/All/
Jan 15 18:17:01 engserv sudo[7859]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 18:36:00 engserv kernel: INFO: task jbd2/sdb1-8:215 blocked for more than 120 seconds.
Jan 15 18:36:01 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:36:01 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:36:01 engserv kernel: jbd2/sdb1-8 D 0000000000000000 0 215 2 0x00000000
Jan 15 18:36:01 engserv kernel: ffff8800bcc27c90 0000000000000046 ffff8800bd24c670 00000000000135c0
Jan 15 18:36:01 engserv kernel: ffff8800bcc27fd8 00000000000135c0 ffff88003b934670 ffff8800bd24c670
Jan 15 18:36:01 engserv kernel: ffff8800bcc27be0 ffff8800bcc27bf8 ffff8800bcc27be0 ffffffffa024b3c7
Jan 15 18:36:01 engserv kernel: Call Trace:
Jan 15 18:36:01 engserv kernel: [<ffffffffa024b3c7>] ? ext4_mb_unload_buddy.isra.18+0x27/0x30 [ext4]
Jan 15 18:36:01 engserv kernel: [<ffffffff810b5f30>] ? cpuacct_charge+0x50/0x60
Jan 15 18:36:01 engserv kernel: [<ffffffff810a4c9c>] ? update_curr+0xec/0x1b0
Jan 15 18:36:01 engserv kernel: [<ffffffff810a51ff>] ? dequeue_entity+0x13f/0x580
Jan 15 18:36:01 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:36:01 engserv kernel: [<ffffffffa00fb806>] jbd2_journal_commit_transaction+0x236/0x19c0 [jbd2]
Jan 15 18:36:01 engserv kernel: [<ffffffff810a9954>] ? pick_next_task_fair+0x144/0x520
Jan 15 18:36:01 engserv kernel: [<ffffffff810136b2>] ? __switch_to+0x1b2/0x5e0
Jan 15 18:36:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:36:01 engserv kernel: [<ffffffff810d659e>] ? try_to_del_timer_sync+0x5e/0x90
Jan 15 18:36:01 engserv kernel: [<ffffffffa010280c>] kjournald2+0xec/0x2a0 [jbd2]
Jan 15 18:36:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:36:01 engserv kernel: [<ffffffffa0102720>] ? commit_timeout+0x10/0x10 [jbd2]
Jan 15 18:36:01 engserv kernel: [<ffffffff8108e2ea>] kthread+0xea/0x100
Jan 15 18:36:01 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:36:01 engserv kernel: [<ffffffff8153dbbc>] ret_from_fork+0x7c/0xb0
Jan 15 18:36:01 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:36:01 engserv kernel: INFO: task rsync:7862 blocked for more than 120 seconds.
Jan 15 18:36:01 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:36:01 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:36:01 engserv kernel: rsync D 0000000000000002 0 7862 7861 0x00000000
Jan 15 18:36:01 engserv kernel: ffff8800bd337a80 0000000000000086 ffff88003b934670 00000000000135c0
Jan 15 18:36:01 engserv kernel: ffff8800bd337fd8 00000000000135c0 ffff880138400000 ffff88003b934670
Jan 15 18:36:01 engserv kernel: ffffffff00000e00 00000000010200da 0000000000000246 ffff88013eff96c0
Jan 15 18:36:01 engserv kernel: Call Trace:
Jan 15 18:36:01 engserv kernel: [<ffffffff8115ab54>] ? __alloc_pages_nodemask+0x174/0xb40
Jan 15 18:36:01 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:36:01 engserv kernel: [<ffffffffa00f808d>] wait_transaction_locked+0x8d/0xd0 [jbd2]
Jan 15 18:36:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:36:01 engserv kernel: [<ffffffffa00f83c2>] start_this_handle+0x262/0x610 [jbd2]
Jan 15 18:36:01 engserv kernel: [<ffffffff81150c1e>] ? __add_to_page_cache_locked+0x24e/0x2c0
Jan 15 18:36:01 engserv kernel: [<ffffffff811ab9da>] ? kmem_cache_alloc+0x16a/0x170
Jan 15 18:36:01 engserv kernel: [<ffffffffa00f8b6b>] jbd2__journal_start+0xfb/0x210 [jbd2]
Jan 15 18:36:01 engserv kernel: [<ffffffffa021ce4f>] ? ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:36:01 engserv kernel: [<ffffffffa02486cd>] __ext4_journal_start_sb+0x6d/0x110 [ext4]
Jan 15 18:36:01 engserv kernel: [<ffffffffa021ce4f>] ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:36:01 engserv kernel: [<ffffffff8115191a>] generic_perform_write+0xca/0x1e0
Jan 15 18:36:01 engserv kernel: [<ffffffff81153345>] __generic_file_write_iter+0x1e5/0x3b0
Jan 15 18:36:01 engserv kernel: [<ffffffffa0211eba>] ext4_file_write_iter+0x11a/0x3f0 [ext4]
Jan 15 18:36:01 engserv kernel: [<ffffffff811dc05b>] ? core_sys_select+0x2cb/0x330
Jan 15 18:36:01 engserv kernel: [<ffffffff8142935b>] ? sock_aio_read.part.29+0xcb/0x100
Jan 15 18:36:01 engserv kernel: [<ffffffff811c71ee>] new_sync_write+0x8e/0xd0
Jan 15 18:36:01 engserv kernel: [<ffffffff811c7967>] vfs_write+0xb7/0x200
Jan 15 18:36:01 engserv kernel: [<ffffffff811c787c>] ? vfs_read+0x13c/0x170
Jan 15 18:36:01 engserv kernel: [<ffffffff811c85d9>] SyS_write+0x59/0xd0
Jan 15 18:36:01 engserv kernel: [<ffffffff8153dc69>] system_call_fastpath+0x16/0x1b
Jan 15 18:38:00 engserv kernel: INFO: task jbd2/sdb1-8:215 blocked for more than 120 seconds.
Jan 15 18:38:00 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:38:00 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:38:00 engserv kernel: jbd2/sdb1-8 D 0000000000000000 0 215 2 0x00000000
Jan 15 18:38:00 engserv kernel: ffff8800bcc27c90 0000000000000046 ffff8800bd24c670 00000000000135c0
Jan 15 18:38:00 engserv kernel: ffff8800bcc27fd8 00000000000135c0 ffff88003b934670 ffff8800bd24c670
Jan 15 18:38:00 engserv kernel: ffff8800bcc27be0 ffff8800bcc27bf8 ffff8800bcc27be0 ffffffffa024b3c7
Jan 15 18:38:00 engserv kernel: Call Trace:
Jan 15 18:38:00 engserv kernel: [<ffffffffa024b3c7>] ? ext4_mb_unload_buddy.isra.18+0x27/0x30 [ext4]
Jan 15 18:38:00 engserv kernel: [<ffffffff810b5f30>] ? cpuacct_charge+0x50/0x60
Jan 15 18:38:00 engserv kernel: [<ffffffff810a4c9c>] ? update_curr+0xec/0x1b0
Jan 15 18:38:00 engserv kernel: [<ffffffff810a51ff>] ? dequeue_entity+0x13f/0x580
Jan 15 18:38:00 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:38:00 engserv kernel: [<ffffffffa00fb806>] jbd2_journal_commit_transaction+0x236/0x19c0 [jbd2]
Jan 15 18:38:00 engserv kernel: [<ffffffff810a9954>] ? pick_next_task_fair+0x144/0x520
Jan 15 18:38:00 engserv kernel: [<ffffffff810136b2>] ? __switch_to+0x1b2/0x5e0
Jan 15 18:38:00 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:38:00 engserv kernel: [<ffffffff810d659e>] ? try_to_del_timer_sync+0x5e/0x90
Jan 15 18:38:00 engserv kernel: [<ffffffffa010280c>] kjournald2+0xec/0x2a0 [jbd2]
Jan 15 18:38:00 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:38:00 engserv kernel: [<ffffffffa0102720>] ? commit_timeout+0x10/0x10 [jbd2]
Jan 15 18:38:00 engserv kernel: [<ffffffff8108e2ea>] kthread+0xea/0x100
Jan 15 18:38:00 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:38:00 engserv kernel: [<ffffffff8153dbbc>] ret_from_fork+0x7c/0xb0
Jan 15 18:38:00 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:38:00 engserv kernel: INFO: task rsync:7862 blocked for more than 120 seconds.
Jan 15 18:38:00 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:38:00 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:38:00 engserv kernel: rsync D 0000000000000002 0 7862 7861 0x00000000
Jan 15 18:38:00 engserv kernel: ffff8800bd337a80 0000000000000086 ffff88003b934670 00000000000135c0
Jan 15 18:38:00 engserv kernel: ffff8800bd337fd8 00000000000135c0 ffff880138400000 ffff88003b934670
Jan 15 18:38:00 engserv kernel: ffffffff00000e00 00000000010200da 0000000000000246 ffff88013eff96c0
Jan 15 18:38:00 engserv kernel: Call Trace:
Jan 15 18:38:00 engserv kernel: [<ffffffff8115ab54>] ? __alloc_pages_nodemask+0x174/0xb40
Jan 15 18:38:00 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:38:00 engserv kernel: [<ffffffffa00f808d>] wait_transaction_locked+0x8d/0xd0 [jbd2]
Jan 15 18:38:00 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:38:00 engserv kernel: [<ffffffffa00f83c2>] start_this_handle+0x262/0x610 [jbd2]
Jan 15 18:38:00 engserv kernel: [<ffffffff81150c1e>] ? __add_to_page_cache_locked+0x24e/0x2c0
Jan 15 18:38:01 engserv kernel: [<ffffffff811ab9da>] ? kmem_cache_alloc+0x16a/0x170
Jan 15 18:38:01 engserv kernel: [<ffffffffa00f8b6b>] jbd2__journal_start+0xfb/0x210 [jbd2]
Jan 15 18:38:01 engserv kernel: [<ffffffffa021ce4f>] ? ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:38:01 engserv kernel: [<ffffffffa02486cd>] __ext4_journal_start_sb+0x6d/0x110 [ext4]
Jan 15 18:38:01 engserv kernel: [<ffffffffa021ce4f>] ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:38:01 engserv kernel: [<ffffffff8115191a>] generic_perform_write+0xca/0x1e0
Jan 15 18:38:01 engserv kernel: [<ffffffff81153345>] __generic_file_write_iter+0x1e5/0x3b0
Jan 15 18:38:01 engserv kernel: [<ffffffffa0211eba>] ext4_file_write_iter+0x11a/0x3f0 [ext4]
Jan 15 18:38:01 engserv kernel: [<ffffffff811dc05b>] ? core_sys_select+0x2cb/0x330
Jan 15 18:38:01 engserv kernel: [<ffffffff8142935b>] ? sock_aio_read.part.29+0xcb/0x100
Jan 15 18:38:01 engserv kernel: [<ffffffff811c71ee>] new_sync_write+0x8e/0xd0
Jan 15 18:38:01 engserv kernel: [<ffffffff811c7967>] vfs_write+0xb7/0x200
Jan 15 18:38:01 engserv kernel: [<ffffffff811c787c>] ? vfs_read+0x13c/0x170
Jan 15 18:38:01 engserv kernel: [<ffffffff811c85d9>] SyS_write+0x59/0xd0
Jan 15 18:38:01 engserv kernel: [<ffffffff8153dc69>] system_call_fastpath+0x16/0x1b
Jan 15 18:40:00 engserv kernel: INFO: task jbd2/sdb1-8:215 blocked for more than 120 seconds.
Jan 15 18:40:00 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:40:00 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:40:00 engserv kernel: jbd2/sdb1-8 D 0000000000000000 0 215 2 0x00000000
Jan 15 18:40:00 engserv kernel: ffff8800bcc27c90 0000000000000046 ffff8800bd24c670 00000000000135c0
Jan 15 18:40:00 engserv kernel: ffff8800bcc27fd8 00000000000135c0 ffff88003b934670 ffff8800bd24c670
Jan 15 18:40:00 engserv kernel: ffff8800bcc27be0 ffff8800bcc27bf8 ffff8800bcc27be0 ffffffffa024b3c7
Jan 15 18:40:00 engserv kernel: Call Trace:
Jan 15 18:40:00 engserv kernel: [<ffffffffa024b3c7>] ? ext4_mb_unload_buddy.isra.18+0x27/0x30 [ext4]
Jan 15 18:40:00 engserv kernel: [<ffffffff810b5f30>] ? cpuacct_charge+0x50/0x60
Jan 15 18:40:00 engserv kernel: [<ffffffff810a4c9c>] ? update_curr+0xec/0x1b0
Jan 15 18:40:00 engserv kernel: [<ffffffff810a51ff>] ? dequeue_entity+0x13f/0x580
Jan 15 18:40:00 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:40:00 engserv kernel: [<ffffffffa00fb806>] jbd2_journal_commit_transaction+0x236/0x19c0 [jbd2]
Jan 15 18:40:00 engserv kernel: [<ffffffff810a9954>] ? pick_next_task_fair+0x144/0x520
Jan 15 18:40:01 engserv kernel: [<ffffffff810136b2>] ? __switch_to+0x1b2/0x5e0
Jan 15 18:40:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:40:01 engserv kernel: [<ffffffff810d659e>] ? try_to_del_timer_sync+0x5e/0x90
Jan 15 18:40:01 engserv kernel: [<ffffffffa010280c>] kjournald2+0xec/0x2a0 [jbd2]
Jan 15 18:40:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:40:01 engserv kernel: [<ffffffffa0102720>] ? commit_timeout+0x10/0x10 [jbd2]
Jan 15 18:40:01 engserv kernel: [<ffffffff8108e2ea>] kthread+0xea/0x100
Jan 15 18:40:01 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:40:01 engserv kernel: [<ffffffff8153dbbc>] ret_from_fork+0x7c/0xb0
Jan 15 18:40:01 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:40:01 engserv kernel: INFO: task rsync:7862 blocked for more than 120 seconds.
Jan 15 18:40:01 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:40:01 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:40:01 engserv kernel: rsync D 0000000000000002 0 7862 7861 0x00000000
Jan 15 18:40:01 engserv kernel: ffff8800bd337a80 0000000000000086 ffff88003b934670 00000000000135c0
Jan 15 18:40:01 engserv kernel: ffff8800bd337fd8 00000000000135c0 ffff880138400000 ffff88003b934670
Jan 15 18:40:01 engserv kernel: ffffffff00000e00 00000000010200da 0000000000000246 ffff88013eff96c0
Jan 15 18:40:01 engserv kernel: Call Trace:
Jan 15 18:40:01 engserv kernel: [<ffffffff8115ab54>] ? __alloc_pages_nodemask+0x174/0xb40
Jan 15 18:40:01 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:40:01 engserv kernel: [<ffffffffa00f808d>] wait_transaction_locked+0x8d/0xd0 [jbd2]
Jan 15 18:40:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:40:01 engserv kernel: [<ffffffffa00f83c2>] start_this_handle+0x262/0x610 [jbd2]
Jan 15 18:40:01 engserv kernel: [<ffffffff81150c1e>] ? __add_to_page_cache_locked+0x24e/0x2c0
Jan 15 18:40:01 engserv kernel: [<ffffffff811ab9da>] ? kmem_cache_alloc+0x16a/0x170
Jan 15 18:40:01 engserv kernel: [<ffffffffa00f8b6b>] jbd2__journal_start+0xfb/0x210 [jbd2]
Jan 15 18:40:01 engserv kernel: [<ffffffffa021ce4f>] ? ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:40:01 engserv kernel: [<ffffffffa02486cd>] __ext4_journal_start_sb+0x6d/0x110 [ext4]
Jan 15 18:40:01 engserv kernel: [<ffffffffa021ce4f>] ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:40:01 engserv kernel: [<ffffffff8115191a>] generic_perform_write+0xca/0x1e0
Jan 15 18:40:01 engserv kernel: [<ffffffff81153345>] __generic_file_write_iter+0x1e5/0x3b0
Jan 15 18:40:01 engserv kernel: [<ffffffffa0211eba>] ext4_file_write_iter+0x11a/0x3f0 [ext4]
Jan 15 18:40:01 engserv kernel: [<ffffffff811dc05b>] ? core_sys_select+0x2cb/0x330
Jan 15 18:40:01 engserv kernel: [<ffffffff8142935b>] ? sock_aio_read.part.29+0xcb/0x100
Jan 15 18:40:01 engserv kernel: [<ffffffff811c71ee>] new_sync_write+0x8e/0xd0
Jan 15 18:40:01 engserv kernel: [<ffffffff811c7967>] vfs_write+0xb7/0x200
Jan 15 18:40:01 engserv kernel: [<ffffffff811c787c>] ? vfs_read+0x13c/0x170
Jan 15 18:40:01 engserv kernel: [<ffffffff811c85d9>] SyS_write+0x59/0xd0
Jan 15 18:40:01 engserv kernel: [<ffffffff8153dc69>] system_call_fastpath+0x16/0x1b
Jan 15 18:42:00 engserv kernel: INFO: task jbd2/sdb1-8:215 blocked for more than 120 seconds.
Jan 15 18:42:01 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:42:01 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:42:01 engserv kernel: jbd2/sdb1-8 D 0000000000000000 0 215 2 0x00000000
Jan 15 18:42:01 engserv kernel: ffff8800bcc27c90 0000000000000046 ffff8800bd24c670 00000000000135c0
Jan 15 18:42:01 engserv kernel: ffff8800bcc27fd8 00000000000135c0 ffff88003b934670 ffff8800bd24c670
Jan 15 18:42:01 engserv kernel: ffff8800bcc27be0 ffff8800bcc27bf8 ffff8800bcc27be0 ffffffffa024b3c7
Jan 15 18:42:01 engserv kernel: Call Trace:
Jan 15 18:42:01 engserv kernel: [<ffffffffa024b3c7>] ? ext4_mb_unload_buddy.isra.18+0x27/0x30 [ext4]
Jan 15 18:42:01 engserv kernel: [<ffffffff810b5f30>] ? cpuacct_charge+0x50/0x60
Jan 15 18:42:01 engserv kernel: [<ffffffff810a4c9c>] ? update_curr+0xec/0x1b0
Jan 15 18:42:01 engserv kernel: [<ffffffff810a51ff>] ? dequeue_entity+0x13f/0x580
Jan 15 18:42:01 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:42:01 engserv kernel: [<ffffffffa00fb806>] jbd2_journal_commit_transaction+0x236/0x19c0 [jbd2]
Jan 15 18:42:01 engserv kernel: [<ffffffff810a9954>] ? pick_next_task_fair+0x144/0x520
Jan 15 18:42:01 engserv kernel: [<ffffffff810136b2>] ? __switch_to+0x1b2/0x5e0
Jan 15 18:42:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:42:01 engserv kernel: [<ffffffff810d659e>] ? try_to_del_timer_sync+0x5e/0x90
Jan 15 18:42:01 engserv kernel: [<ffffffffa010280c>] kjournald2+0xec/0x2a0 [jbd2]
Jan 15 18:42:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:42:01 engserv kernel: [<ffffffffa0102720>] ? commit_timeout+0x10/0x10 [jbd2]
Jan 15 18:42:01 engserv kernel: [<ffffffff8108e2ea>] kthread+0xea/0x100
Jan 15 18:42:01 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:42:01 engserv kernel: [<ffffffff8153dbbc>] ret_from_fork+0x7c/0xb0
Jan 15 18:42:01 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:42:01 engserv kernel: INFO: task rsync:7862 blocked for more than 120 seconds.
Jan 15 18:42:01 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:42:01 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:42:01 engserv kernel: rsync D 0000000000000002 0 7862 7861 0x00000000
Jan 15 18:42:01 engserv kernel: ffff8800bd337a80 0000000000000086 ffff88003b934670 00000000000135c0
Jan 15 18:42:01 engserv kernel: ffff8800bd337fd8 00000000000135c0 ffff880138400000 ffff88003b934670
Jan 15 18:42:01 engserv kernel: ffffffff00000e00 00000000010200da 0000000000000246 ffff88013eff96c0
Jan 15 18:42:01 engserv kernel: Call Trace:
Jan 15 18:42:01 engserv kernel: [<ffffffff8115ab54>] ? __alloc_pages_nodemask+0x174/0xb40
Jan 15 18:42:01 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:42:01 engserv kernel: [<ffffffffa00f808d>] wait_transaction_locked+0x8d/0xd0 [jbd2]
Jan 15 18:42:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:42:01 engserv kernel: [<ffffffffa00f83c2>] start_this_handle+0x262/0x610 [jbd2]
Jan 15 18:42:01 engserv kernel: [<ffffffff81150c1e>] ? __add_to_page_cache_locked+0x24e/0x2c0
Jan 15 18:42:01 engserv kernel: [<ffffffff811ab9da>] ? kmem_cache_alloc+0x16a/0x170
Jan 15 18:42:01 engserv kernel: [<ffffffffa00f8b6b>] jbd2__journal_start+0xfb/0x210 [jbd2]
Jan 15 18:42:01 engserv kernel: [<ffffffffa021ce4f>] ? ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:42:01 engserv kernel: [<ffffffffa02486cd>] __ext4_journal_start_sb+0x6d/0x110 [ext4]
Jan 15 18:42:01 engserv kernel: [<ffffffffa021ce4f>] ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:42:01 engserv kernel: [<ffffffff8115191a>] generic_perform_write+0xca/0x1e0
Jan 15 18:42:01 engserv kernel: [<ffffffff81153345>] __generic_file_write_iter+0x1e5/0x3b0
Jan 15 18:42:01 engserv kernel: [<ffffffffa0211eba>] ext4_file_write_iter+0x11a/0x3f0 [ext4]
Jan 15 18:42:01 engserv kernel: [<ffffffff811dc05b>] ? core_sys_select+0x2cb/0x330
Jan 15 18:42:01 engserv kernel: [<ffffffff8142935b>] ? sock_aio_read.part.29+0xcb/0x100
Jan 15 18:42:01 engserv kernel: [<ffffffff811c71ee>] new_sync_write+0x8e/0xd0
Jan 15 18:42:01 engserv kernel: [<ffffffff811c7967>] vfs_write+0xb7/0x200
Jan 15 18:42:01 engserv kernel: [<ffffffff811c787c>] ? vfs_read+0x13c/0x170
Jan 15 18:42:01 engserv kernel: [<ffffffff811c85d9>] SyS_write+0x59/0xd0
Jan 15 18:42:01 engserv kernel: [<ffffffff8153dc69>] system_call_fastpath+0x16/0x1b
Jan 15 18:44:00 engserv kernel: INFO: task jbd2/sdb1-8:215 blocked for more than 120 seconds.
Jan 15 18:44:00 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:44:00 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:44:00 engserv kernel: jbd2/sdb1-8 D 0000000000000000 0 215 2 0x00000000
Jan 15 18:44:00 engserv kernel: ffff8800bcc27c90 0000000000000046 ffff8800bd24c670 00000000000135c0
Jan 15 18:44:00 engserv kernel: ffff8800bcc27fd8 00000000000135c0 ffff88003b934670 ffff8800bd24c670
Jan 15 18:44:00 engserv kernel: ffff8800bcc27be0 ffff8800bcc27bf8 ffff8800bcc27be0 ffffffffa024b3c7
Jan 15 18:44:00 engserv kernel: Call Trace:
Jan 15 18:44:00 engserv kernel: [<ffffffffa024b3c7>] ? ext4_mb_unload_buddy.isra.18+0x27/0x30 [ext4]
Jan 15 18:44:00 engserv kernel: [<ffffffff810b5f30>] ? cpuacct_charge+0x50/0x60
Jan 15 18:44:00 engserv kernel: [<ffffffff810a4c9c>] ? update_curr+0xec/0x1b0
Jan 15 18:44:00 engserv kernel: [<ffffffff810a51ff>] ? dequeue_entity+0x13f/0x580
Jan 15 18:44:00 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:44:00 engserv kernel: [<ffffffffa00fb806>] jbd2_journal_commit_transaction+0x236/0x19c0 [jbd2]
Jan 15 18:44:00 engserv kernel: [<ffffffff810a9954>] ? pick_next_task_fair+0x144/0x520
Jan 15 18:44:00 engserv kernel: [<ffffffff810136b2>] ? __switch_to+0x1b2/0x5e0
Jan 15 18:44:00 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:44:00 engserv kernel: [<ffffffff810d659e>] ? try_to_del_timer_sync+0x5e/0x90
Jan 15 18:44:00 engserv kernel: [<ffffffffa010280c>] kjournald2+0xec/0x2a0 [jbd2]
Jan 15 18:44:00 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:44:00 engserv kernel: [<ffffffffa0102720>] ? commit_timeout+0x10/0x10 [jbd2]
Jan 15 18:44:00 engserv kernel: [<ffffffff8108e2ea>] kthread+0xea/0x100
Jan 15 18:44:00 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:44:00 engserv kernel: [<ffffffff8153dbbc>] ret_from_fork+0x7c/0xb0
Jan 15 18:44:00 engserv kernel: [<ffffffff8108e200>] ? kthread_create_on_node+0x1b0/0x1b0
Jan 15 18:44:00 engserv kernel: INFO: task rsync:7862 blocked for more than 120 seconds.
Jan 15 18:44:00 engserv kernel: Not tainted 3.17.6-1-ARCH #1
Jan 15 18:44:00 engserv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 15 18:44:00 engserv kernel: rsync D 0000000000000002 0 7862 7861 0x00000000
Jan 15 18:44:00 engserv kernel: ffff8800bd337a80 0000000000000086 ffff88003b934670 00000000000135c0
Jan 15 18:44:00 engserv kernel: ffff8800bd337fd8 00000000000135c0 ffff880138400000 ffff88003b934670
Jan 15 18:44:00 engserv kernel: ffffffff00000e00 00000000010200da 0000000000000246 ffff88013eff96c0
Jan 15 18:44:00 engserv kernel: Call Trace:
Jan 15 18:44:01 engserv kernel: [<ffffffff8115ab54>] ? __alloc_pages_nodemask+0x174/0xb40
Jan 15 18:44:01 engserv kernel: [<ffffffff81539649>] schedule+0x29/0x70
Jan 15 18:44:01 engserv kernel: [<ffffffffa00f808d>] wait_transaction_locked+0x8d/0xd0 [jbd2]
Jan 15 18:44:01 engserv kernel: [<ffffffff810af960>] ? __wake_up_sync+0x20/0x20
Jan 15 18:44:01 engserv kernel: [<ffffffffa00f83c2>] start_this_handle+0x262/0x610 [jbd2]
Jan 15 18:44:01 engserv kernel: [<ffffffff81150c1e>] ? __add_to_page_cache_locked+0x24e/0x2c0
Jan 15 18:44:01 engserv kernel: [<ffffffff811ab9da>] ? kmem_cache_alloc+0x16a/0x170
Jan 15 18:44:01 engserv kernel: [<ffffffffa00f8b6b>] jbd2__journal_start+0xfb/0x210 [jbd2]
Jan 15 18:44:01 engserv kernel: [<ffffffffa021ce4f>] ? ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:44:01 engserv kernel: [<ffffffffa02486cd>] __ext4_journal_start_sb+0x6d/0x110 [ext4]
Jan 15 18:44:01 engserv kernel: [<ffffffffa021ce4f>] ext4_da_write_begin+0x10f/0x350 [ext4]
Jan 15 18:44:01 engserv kernel: [<ffffffff8115191a>] generic_perform_write+0xca/0x1e0
Jan 15 18:44:01 engserv kernel: [<ffffffff81153345>] __generic_file_write_iter+0x1e5/0x3b0
Jan 15 18:44:01 engserv kernel: [<ffffffffa0211eba>] ext4_file_write_iter+0x11a/0x3f0 [ext4]
Jan 15 18:44:01 engserv kernel: [<ffffffff811dc05b>] ? core_sys_select+0x2cb/0x330
Jan 15 18:44:01 engserv kernel: [<ffffffff8142935b>] ? sock_aio_read.part.29+0xcb/0x100
Jan 15 18:44:01 engserv kernel: [<ffffffff811c71ee>] new_sync_write+0x8e/0xd0
Jan 15 18:44:01 engserv kernel: [<ffffffff811c7967>] vfs_write+0xb7/0x200
Jan 15 18:44:01 engserv kernel: [<ffffffff811c787c>] ? vfs_read+0x13c/0x170
Jan 15 18:44:01 engserv kernel: [<ffffffff811c85d9>] SyS_write+0x59/0xd0
Jan 15 18:44:01 engserv kernel: [<ffffffff8153dc69>] system_call_fastpath+0x16/0x1b
Jan 15 18:48:48 engserv sudo[7897]: sth : TTY=tty1 ; PWD=/home/sth ; USER=root ; COMMAND=/usr/bin/journalctl -xb --no-pager
Jan 15 18:48:48 engserv sudo[7897]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 18:48:49 engserv sudo[7897]: pam_unix(sudo:session): session closed for user root
Jan 15 18:51:45 engserv sudo[7859]: pam_unix(sudo:session): session closed for user root
Jan 15 18:52:38 engserv sudo[7911]: sth : TTY=pts/0 ; PWD=/mnt/smb/share2 ; USER=root ; COMMAND=/usr/bin/pkill rsync
Jan 15 18:52:38 engserv sudo[7911]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 18:52:38 engserv sudo[7911]: pam_unix(sudo:session): session closed for user root
Jan 15 18:52:50 engserv sudo[7916]: sth : TTY=pts/0 ; PWD=/mnt/smb/share2 ; USER=root ; COMMAND=/usr/bin/pkill rsync
Jan 15 18:52:50 engserv sudo[7916]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 18:52:50 engserv sudo[7916]: pam_unix(sudo:session): session closed for user root
Jan 15 18:53:06 engserv sudo[7918]: sth : TTY=pts/0 ; PWD=/mnt/smb/share2 ; USER=root ; COMMAND=/usr/bin/pkill -9 rsync
Jan 15 18:53:06 engserv sudo[7918]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 18:53:06 engserv sudo[7918]: pam_unix(sudo:session): session closed for user root
Jan 15 18:55:59 engserv sudo[7949]: sth : TTY=pts/0 ; PWD=/mnt/smb/share2 ; USER=root ; COMMAND=/usr/bin/pkill -9 rsync
Jan 15 18:55:59 engserv sudo[7949]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 18:55:59 engserv sudo[7949]: pam_unix(sudo:session): session closed for user root
Jan 15 18:56:21 engserv systemd[1]: Starting Getty on tty2...
-- Subject: Unit [email protected] has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun starting up.
Jan 15 18:56:21 engserv systemd[1]: Started Getty on tty2.
-- Subject: Unit [email protected] has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has finished starting up.
-- The start-up result is done.
Jan 15 18:56:25 engserv login[7954]: pam_unix(login:session): session opened for user sth by LOGIN(uid=0)
Jan 15 18:56:25 engserv systemd[1]: Starting Session c4 of user sth.
-- Subject: Unit session-c4.scope has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c4.scope has begun starting up.
Jan 15 18:56:25 engserv systemd-logind[275]: New session c4 of user sth.
-- Subject: A new session c4 has been created for user sth
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat
-- A new session with the ID c4 has been created for the user sth.
-- The leading process of the session is 7954.
Jan 15 18:56:25 engserv systemd[1]: Started Session c4 of user sth.
-- Subject: Unit session-c4.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c4.scope has finished starting up.
-- The start-up result is done.
Jan 15 18:56:25 engserv login[7954]: LOGIN ON tty2 BY sth
Jan 15 18:56:39 engserv sudo[7960]: sth : TTY=tty2 ; PWD=/home/sth ; USER=root ; COMMAND=/usr/bin/umount /media/data/
Jan 15 18:56:39 engserv sudo[7960]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 18:56:39 engserv sudo[7960]: pam_unix(sudo:session): session closed for user root
Jan 15 19:02:43 engserv sudo[7984]: sth : TTY=pts/0 ; PWD=/mnt/smb/share2 ; USER=root ; COMMAND=/usr/bin/tee /proc/sys/vm/drop_caches
Jan 15 19:02:43 engserv sudo[7984]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 19:02:43 engserv kernel: ------------[ cut here ]------------
Jan 15 19:02:43 engserv kernel: WARNING: CPU: 3 PID: 7985 at mm/truncate.c:508 invalidate_mapping_pages+0x1c1/0x1f0()
Jan 15 19:02:43 engserv kernel: Modules linked in: des3_ede_x86_64 des_generic arc4 ecb md4 md5 hmac nls_utf8 cifs dns_resolver fscache cfg80211 rfkill nls_iso8859_1 nls_cp437 vfat fat nouveau video ttm drm_kms_helper drm kvm_amd r8169 i2c_algo_bit kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel mxm_wmi evdev snd_hda_codec_realtek snd_hda_codec_hdmi sp5100_tco aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd mac_hid pcspkr serio_raw edac_core snd_hda_codec_generic edac_mce_amd mii fam15h_power i2c_piix4 k10temp hwmon i2c_core shpchp tpm_infineon snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore wmi tpm_tis tpm button acpi_cpufreq processor sch_fq_codel ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common atkbd libps2 ahci firewire_ohci
Jan 15 19:02:43 engserv kernel: ehci_pci libahci ohci_pci firewire_core ohci_hcd libata crc_itu_t xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
Jan 15 19:02:43 engserv kernel: CPU: 3 PID: 7985 Comm: tee Not tainted 3.17.6-1-ARCH #1
Jan 15 19:02:43 engserv kernel: Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS FC 02/05/2013
Jan 15 19:02:43 engserv kernel: 0000000000000000 000000008e7f3f05 ffff8800b9727c58 ffffffff81537c3e
Jan 15 19:02:43 engserv kernel: 0000000000000000 ffff8800b9727c90 ffffffff8107079d 0000000000000003
Jan 15 19:02:43 engserv kernel: 0000000000000003 ffff880137e2c0a8 ffffffffffffffff ffffea0000637e00
Jan 15 19:02:43 engserv kernel: Call Trace:
Jan 15 19:02:43 engserv kernel: [<ffffffff81537c3e>] dump_stack+0x4d/0x6f
Jan 15 19:02:43 engserv kernel: [<ffffffff8107079d>] warn_slowpath_common+0x7d/0xa0
Jan 15 19:02:43 engserv kernel: [<ffffffff810708ca>] warn_slowpath_null+0x1a/0x20
Jan 15 19:02:43 engserv kernel: [<ffffffff811627c1>] invalidate_mapping_pages+0x1c1/0x1f0
Jan 15 19:02:43 engserv kernel: [<ffffffff81224e0c>] drop_pagecache_sb+0xac/0xf0
Jan 15 19:02:43 engserv kernel: [<ffffffff81224d60>] ? do_coredump+0xec0/0xec0
Jan 15 19:02:43 engserv kernel: [<ffffffff811cb432>] iterate_supers+0xb2/0x110
Jan 15 19:02:43 engserv kernel: [<ffffffff81224ed6>] drop_caches_sysctl_handler+0x86/0x140
Jan 15 19:02:43 engserv kernel: [<ffffffff81206dac>] ? fsnotify+0x28c/0x370
Jan 15 19:02:43 engserv kernel: [<ffffffff812387a3>] proc_sys_call_handler+0xd3/0xf0
Jan 15 19:02:43 engserv kernel: [<ffffffff812387d4>] proc_sys_write+0x14/0x20
Jan 15 19:02:43 engserv kernel: [<ffffffff811c7967>] vfs_write+0xb7/0x200
Jan 15 19:02:43 engserv kernel: [<ffffffff811c787c>] ? vfs_read+0x13c/0x170
Jan 15 19:02:43 engserv kernel: [<ffffffff811c85d9>] SyS_write+0x59/0xd0
Jan 15 19:02:43 engserv kernel: [<ffffffff8153dc69>] system_call_fastpath+0x16/0x1b
Jan 15 19:02:43 engserv kernel: ---[ end trace 2601969f96a93148 ]---
Jan 15 19:02:44 engserv kernel: tee (7985): drop_caches: 3
Jan 15 19:08:04 engserv sudo[8011]: sth : TTY=tty2 ; PWD=/home/sth ; USER=root ; COMMAND=/usr/bin/reboot
Jan 15 19:08:04 engserv sudo[8011]: pam_unix(sudo:session): session opened for user root by sth(uid=0)
Jan 15 19:08:04 engserv systemd[1]: Unmounting /media/data...
-- Subject: Unit media-data.mount has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit media-data.mount has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Timers.
-- Subject: Unit timers.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit timers.target has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped target Timers.
-- Subject: Unit timers.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit timers.target has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Session c3 of user sth.
-- Subject: Unit session-c3.scope has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c3.scope has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped Session c3 of user sth.
-- Subject: Unit session-c3.scope has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c3.scope has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping system-systemd\x2dfsck.slice.
-- Subject: Unit system-systemd\x2dfsck.slice has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system-systemd\x2dfsck.slice has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Removed slice system-systemd\x2dfsck.slice.
-- Subject: Unit system-systemd\x2dfsck.slice has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system-systemd\x2dfsck.slice has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Sound Card.
-- Subject: Unit sound.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sound.target has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped target Sound Card.
-- Subject: Unit sound.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sound.target has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Deactivating swap Swap Partition...
-- Subject: Unit dev-sda3.swap has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-sda3.swap has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Graphical Interface.
-- Subject: Unit graphical.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit graphical.target has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped target Graphical Interface.
-- Subject: Unit graphical.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit graphical.target has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Deactivating swap Swap Partition...
-- Subject: Unit dev-sda3.swap has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-sda3.swap has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Daily Cleanup of Temporary Directories.
-- Subject: Unit systemd-tmpfiles-clean.timer has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-tmpfiles-clean.timer has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped Daily Cleanup of Temporary Directories.
-- Subject: Unit systemd-tmpfiles-clean.timer has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-tmpfiles-clean.timer has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Session c1 of user sth.
-- Subject: Unit session-c1.scope has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c1.scope has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped Session c1 of user sth.
-- Subject: Unit session-c1.scope has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c1.scope has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping User Manager for UID 1000...
-- Subject: Unit [email protected] has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Avahi mDNS/DNS-SD Stack...
-- Subject: Unit avahi-daemon.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit avahi-daemon.service has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Deactivating swap Swap Partition...
-- Subject: Unit dev-sda3.swap has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-sda3.swap has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Session c4 of user sth.
-- Subject: Unit session-c4.scope has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c4.scope has begun shutting down.
Jan 15 19:08:04 engserv login[276]: pam_unix(login:session): session closed for user sth
Jan 15 19:08:04 engserv login[276]: pam_systemd(login:session): Failed to release session: Interrupted system call
Jan 15 19:08:04 engserv avahi-daemon[411]: Got SIGTERM, quitting.
Jan 15 19:08:04 engserv avahi-daemon[411]: Leaving mDNS multicast group on interface enp5s0.IPv4 with address 172.16.1.2.
Jan 15 19:08:04 engserv avahi-daemon[411]: avahi-daemon 0.6.31 exiting.
Jan 15 19:08:04 engserv sshd[359]: Received signal 15; terminating.
Jan 15 19:08:04 engserv systemd[1]: Stopped Session c4 of user sth.
-- Subject: Unit session-c4.scope has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit session-c4.scope has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Multi-User System.
-- Subject: Unit multi-user.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit multi-user.target has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped target Multi-User System.
-- Subject: Unit multi-user.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit multi-user.target has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Daily verification of password and group files.
-- Subject: Unit shadow.timer has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit shadow.timer has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped Daily verification of password and group files.
-- Subject: Unit shadow.timer has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit shadow.timer has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping D-Bus System Message Bus...
-- Subject: Unit dbus.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dbus.service has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Daily man-db cache update.
-- Subject: Unit man-db.timer has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit man-db.timer has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped Daily man-db cache update.
-- Subject: Unit man-db.timer has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit man-db.timer has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Login Prompts.
-- Subject: Unit getty.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit getty.target has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped target Login Prompts.
-- Subject: Unit getty.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit getty.target has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Getty on tty1...
-- Subject: Unit [email protected] has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun shutting down.
Jan 15 19:08:04 engserv systemd-logind[275]: Failed to abandon session scope: Transport endpoint is not connected
Jan 15 19:08:04 engserv systemd[364]: Stopping Default.
-- Subject: Unit UNIT has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopped target Default.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Starting Generate shutdown-ramfs...
-- Subject: Unit mkinitcpio-generate-shutdown-ramfs.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit mkinitcpio-generate-shutdown-ramfs.service has begun starting up.
Jan 15 19:08:04 engserv systemd[364]: Stopping Basic System.
-- Subject: Unit UNIT has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopped target Basic System.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopping Timers.
-- Subject: Unit UNIT has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopped target Timers.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopping Paths.
-- Subject: Unit UNIT has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopped target Paths.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopping Sockets.
-- Subject: Unit UNIT has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Samba SMB/CIFS server...
-- Subject: Unit smbd.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit smbd.service has begun shutting down.
Jan 15 19:08:04 engserv systemd[364]: Stopped target Sockets.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished shutting down.
Jan 15 19:08:04 engserv systemd[364]: Starting Shutdown.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Jan 15 19:08:04 engserv systemd[364]: Reached target Shutdown.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Jan 15 19:08:04 engserv systemd[364]: Starting Exit the Session...
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Jan 15 19:08:04 engserv systemd[364]: Received SIGRTMIN+24 from PID 8032 (kill).
Jan 15 19:08:04 engserv systemd[1]: Stopped User Manager for UID 1000.
-- Subject: Unit [email protected] has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping user-1000.slice.
-- Subject: Unit user-1000.slice has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit user-1000.slice has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Removed slice user-1000.slice.
-- Subject: Unit user-1000.slice has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit user-1000.slice has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Permit User Sessions...
-- Subject: Unit systemd-user-sessions.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-user-sessions.service has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped Permit User Sessions.
-- Subject: Unit systemd-user-sessions.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-user-sessions.service has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopping Remote File Systems.
-- Subject: Unit remote-fs.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit remote-fs.target has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Stopped target Remote File Systems.
-- Subject: Unit remote-fs.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit remote-fs.target has finished shutting down.
Jan 15 19:08:04 engserv systemd[1]: Unmounting /mnt/smb/share2...
-- Subject: Unit mnt-smb-share2.mount has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit mnt-smb-share2.mount has begun shutting down.
Jan 15 19:08:04 engserv systemd[1]: Unmounting /mnt/smb/share1...
-- Subject: Unit mnt-smb-share1.mount has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit mnt-smb-share1.mount has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: media-data.mount mount process exited, code=exited status=32
Jan 15 19:08:04 engserv nmbd[7459]: STATUS=daemon 'nmbd' finished starting up and ready to serve connectionsGot SIGTERM: going down...
Jan 15 19:08:04 engserv systemd[366]: pam_unix(systemd-user:session): session closed for user sth
Jan 15 19:08:05 engserv umount[8015]: umount: /media/data: target is busy
Jan 15 19:08:05 engserv umount[8015]: (In some cases useful info about processes that
Jan 15 19:08:05 engserv umount[8015]: use the device is found by lsof(8) or fuser(1).)
Jan 15 19:08:05 engserv systemd[1]: Unmounted /mnt/smb/share2.
-- Subject: Unit mnt-smb-share2.mount has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit mnt-smb-share2.mount has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Unmounted /mnt/smb/share1.
-- Subject: Unit mnt-smb-share1.mount has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit mnt-smb-share1.mount has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Network.
-- Subject: Unit network.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit network.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Network.
-- Subject: Unit network.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit network.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping dhcpcd on enp5s0...
-- Subject: Unit [email protected] has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun shutting down.
Jan 15 19:08:05 engserv dhcpcd[8049]: dhcpcd[8049]: sending signal TERM to pid 358
Jan 15 19:08:05 engserv dhcpcd[8049]: sending signal TERM to pid 358
Jan 15 19:08:05 engserv dhcpcd[8049]: waiting for pid 358 to exit
Jan 15 19:08:05 engserv dhcpcd[358]: received signal TERM from PID 8049, stopping
Jan 15 19:08:05 engserv dhcpcd[358]: enp5s0: removing interface
Jan 15 19:08:05 engserv dhcpcd[8049]: dhcpcd[8049]: waiting for pid 358 to exit
Jan 15 19:08:05 engserv mkinitcpio[8024]: ==> Starting build: none
Jan 15 19:08:05 engserv dhcpcd[358]: exited
Jan 15 19:08:05 engserv systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Jan 15 19:08:05 engserv mkinitcpio[8024]: -> Running build hook: [sd-shutdown]
Jan 15 19:08:05 engserv systemd[1]: Stopped dhcpcd on enp5s0.
-- Subject: Unit [email protected] has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Unit [email protected] entered failed state.
Jan 15 19:08:05 engserv systemd[1]: [email protected] failed.
Jan 15 19:08:05 engserv systemd[1]: Stopping system-dhcpcd.slice.
-- Subject: Unit system-dhcpcd.slice has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system-dhcpcd.slice has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Removed slice system-dhcpcd.slice.
-- Subject: Unit system-dhcpcd.slice has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system-dhcpcd.slice has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Basic System.
-- Subject: Unit basic.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit basic.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Basic System.
-- Subject: Unit basic.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit basic.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Paths.
-- Subject: Unit paths.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit paths.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Paths.
-- Subject: Unit paths.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit paths.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
-- Subject: Unit systemd-ask-password-wall.path has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-ask-password-wall.path has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
-- Subject: Unit systemd-ask-password-wall.path has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-ask-password-wall.path has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
-- Subject: Unit systemd-ask-password-console.path has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-ask-password-console.path has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
-- Subject: Unit systemd-ask-password-console.path has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-ask-password-console.path has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Slices.
-- Subject: Unit slices.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit slices.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Slices.
-- Subject: Unit slices.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit slices.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping User and Session Slice.
-- Subject: Unit user.slice has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit user.slice has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Removed slice User and Session Slice.
-- Subject: Unit user.slice has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit user.slice has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Sockets.
-- Subject: Unit sockets.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sockets.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Sockets.
-- Subject: Unit sockets.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sockets.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping D-Bus System Message Bus Socket.
-- Subject: Unit dbus.socket has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dbus.socket has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Closed D-Bus System Message Bus Socket.
-- Subject: Unit dbus.socket has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dbus.socket has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Avahi mDNS/DNS-SD Stack Activation Socket.
-- Subject: Unit avahi-daemon.socket has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit avahi-daemon.socket has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Closed Avahi mDNS/DNS-SD Stack Activation Socket.
-- Subject: Unit avahi-daemon.socket has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit avahi-daemon.socket has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping System Initialization.
-- Subject: Unit sysinit.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sysinit.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target System Initialization.
-- Subject: Unit sysinit.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sysinit.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Swap.
-- Subject: Unit swap.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit swap.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Swap.
-- Subject: Unit swap.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit swap.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Encrypted Volumes.
-- Subject: Unit cryptsetup.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit cryptsetup.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Encrypted Volumes.
-- Subject: Unit cryptsetup.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit cryptsetup.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Update UTMP about System Boot/Shutdown...
-- Subject: Unit systemd-update-utmp.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-update-utmp.service has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Load/Save Random Seed...
-- Subject: Unit systemd-random-seed.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-random-seed.service has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Setup Virtual Console...
-- Subject: Unit systemd-vconsole-setup.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-vconsole-setup.service has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped Setup Virtual Console.
-- Subject: Unit systemd-vconsole-setup.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-vconsole-setup.service has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Apply Kernel Variables...
-- Subject: Unit systemd-sysctl.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-sysctl.service has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped Apply Kernel Variables.
-- Subject: Unit systemd-sysctl.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-sysctl.service has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped Update UTMP about System Boot/Shutdown.
-- Subject: Unit systemd-update-utmp.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-update-utmp.service has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Create Volatile Files and Directories...
-- Subject: Unit systemd-tmpfiles-setup.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-tmpfiles-setup.service has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped Create Volatile Files and Directories.
-- Subject: Unit systemd-tmpfiles-setup.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-tmpfiles-setup.service has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopping Local File Systems.
-- Subject: Unit local-fs.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit local-fs.target has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Stopped target Local File Systems.
-- Subject: Unit local-fs.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit local-fs.target has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: Unmounting /home...
-- Subject: Unit home.mount has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit home.mount has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Unmounting /run/user/1000...
-- Subject: Unit run-user-1000.mount has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit run-user-1000.mount has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Unmounting /boot...
-- Subject: Unit boot.mount has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit boot.mount has begun shutting down.
Jan 15 19:08:05 engserv systemd[1]: Unmounting Temporary Directory...
-- Subject: Unit tmp.mount has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit tmp.mount has begun shutting down.
Jan 15 19:08:05 engserv umount[8075]: umount: /home: target is busy
Jan 15 19:08:05 engserv umount[8075]: (In some cases useful info about processes that
Jan 15 19:08:05 engserv umount[8075]: use the device is found by lsof(8) or fuser(1).)
Jan 15 19:08:05 engserv systemd[1]: home.mount mount process exited, code=exited status=32
Jan 15 19:08:05 engserv systemd[1]: Failed unmounting /home.
-- Subject: Unit home.mount has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit home.mount has finished shutting down.
Jan 15 19:08:05 engserv systemd[1]: U -
How to continuously play video in iPad new
How to continuously play video in iPad new ?
Ok....lets start this from the begining.....
So you are trying to install apps from the BlackBerry World on to your Z10 but you are getting a message that the app you selected to be installed is NOT avaiable for your Z10 device? And where is the message coming from: from your Z10 or from BlackBerry World when you try to download? -
For a complete new install, do I have to install Leopard 1st, then Snow?
Ok, now Snow is out, I want to reinstall from scratch, do I have to install leopard 1st (my iMac came with it pre installed and have disks) or can I just use the Snow Leopard DVD to install from scratch
I have backed up what I want , ie iTunes, videos, docs, and want to do a brand new install from scratch.
cheersOk, so I can just do a complete fresh install of Snow, I'm not bothered about archive or anything, just a fresh copy of Snow, as if it came pre-installed from Apple factory.
I dont have a Time Machine backup yet, as I all I need for backup is iTunes Library, Videos, photos, everything else I'm not bothered about. So I take it can just manually copy these to my iMac after fresh install of Snow?
Also another question....I have a Intel iMac, bought Xmas 2007, spec wise It:
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Do you think Snow will speed up my system, as now its a "bit old". It was the lowest spec when I bought it in the range (added another 1Gb RAM) but it was my 1st Mac ever, and all I could afford
cheers -
Hey folks... I'm looking for some idea's on my new install (system spec's are in my sig).
I have done some basic playing with the system and it's pretty nice so far. I do have a couple of complaints ( hot hot hot) but mostly I'm dig'n the system.
1) Add Fans... this system is hot, and I'd like to add a/some fans to it for improved airflow. Has anyone done this? I'd like some idea's on how to add more fans. (at least 1 80mm fan would be a great improvement I think). Or any other good idea's on lowering the system/cpu temp (and I did remove the stuff on the heatsink and put on some good AS5... but I didn't lap the heatsink)
2) Sound/Video capture. Here's what I have right now: Dish-network DVR, Mega 180 (with Logitec 5.1 speakers) and a TV. I would like to be able to watch Satellite TV and have the sound (surround sound) come through the 180. Not 100% sure how to do it right now.
And if I add a Capture card, is it just better to go out and get a upgraded video card & capture card (will most likely NOT be playing games on this system, and if we do they won't be high end frame monsters)? Either way, got suggestions?Quote
Originally posted by BigCheeze
Quote
Originally posted by Normunds
Quote
Originally posted by BigCheeze
by "reversing of SYS and CPU fans" you mean just flipping them on the heatsink as to change the direction of airflow?
YES
THANKS
One word of caution. People have claimed that reversing the fans has only worked in systems that did not have a separate video card in the AGP or PCI slots as they restrict air flow thus making the heat related problem worse than it was to begin with. -
New Install -- X Won't Work [SOLVED]
I have to migrate to a new hard drive, and am doing a new install of Arch. I installed from net to have up-to-date packages...
I installed X and what I think are the necessary packages, namely:
ati-dri, libgl, mesa, xf86-input-evdev, xf86-input-synaptics, xf86-video-ati, xorg, hal, and dbus
I start hal with /etc/rc.d/hal start and do a startx but it replies:
error setting MTRR (base = 0xc0000000, size = 0x04000000, type = 1) Inappopriate ioctl for device (25)
I am really stressing out because I need this new hard drive up and running like the old one, so I may be missing something major. Please, please help me get the bottom of this! Configuring xorg in my previous two installs for this computer have been a breeze but this time is killing me.
EDIT:
Okay so the culprit was really stupid and quite annoying! Apparently a default .xinitrc was placed in my home directory. Removing it allowed me to test xorg by having twm load. For some reason I wasn't expecting a default file to placed by Arch of all distros. GRR... got a bit frantic for no reason. I will probably add a note to the wiki so no one else hits this snag.
Last edited by egan (2010-01-07 03:58:32)Perhaps I do not understand what you are doing but I would expect that if you want to use X in a graphical mode you need xorg.conf be it that you use hal to create it for you or you create it by other means.
I know that if I use KDE I can run it without an X configuration file these days but I'm not sure if that is the same for plain old X.
R.
Edit: This is what I was able to find:
Starting with version 7.4, Xorg can use HAL to autodetect keyboards and mice. The sysutils/hal and devel/dbus ports are installed as dependencies of x11/xorg, but must be enabled by the following entries in the /etc/rc.conf file:
hald_enable="YES"
dbus_enable="YES"
Edit 2: Also notice this:
The automatic configuration may fail to work with some hardware, or may not set things up quite as desired. In these cases, manual configuration will be necessary.
Last edited by ralvez (2010-01-07 02:42:01) -
Resoring prodution database into new installed sap system
have installed ecc 6.0 with sql server 2008 (sp 1) on windows 2003
server with 64 bit.
My installtion was done sussfully and also i started sap system.It
was working fine. then i took backup from my standalone system .
I restored prodution server database in standalone system and restore
was done successfully.
Then iam trying to login to sap system then it was saying that
dispature was stopped.
first dispatur was in yellow and status running message server
connection ok,dialuge que time 0;00sec,j2ee status info unavailable.
Iam sending screen shots and also related error log files attatched.
Please can you get help from those documents.
I also checked r3trans -d.
C:\Documents and Settings\Administrator>r3trans -d
This is r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = MSS --- SERER = 'SHURJO' DBNAME = 'PRD'"
r3trans finished (0012).
before doing prodution database restore is compulsary to i have to increase the patch levels of my new installed system
because my prodution server abap& basis patch levels are 19 and my installed system it is only 14.
Please can any body give right way to resolve this problem,
Regards,
Krishna> before doing prodution database restore is compulsary to i have to increase the patch levels of my new installed system
> because my prodution server abap& basis patch levels are 19 and my installed system it is only 14.
First: It's pointless to first install a full system and then try to overwrite the database with another one.
I would INSTALL the system using the database copy.
This procedure is call "homogeneous system copy" and there's a guide for that available at http://service.sap.com/instguides and also in "Note 151603 - Copying an SQL Server database".
The error message is coming because the database has not the proper users, you'd need to run the STM tool to adapt the users and the environment. Those steps are all described in detail in the guide.
Markus -
How to log in to the new installed SAP ABAP instance ?
Dear Experts,
In SAP ERP 2005 installation,
I have done central system installation, Now I need to perform postinstallation steps,
Could you please tell me, how to log in to the new installed SAP ABAP instance and do the post installation?
Regards,
Madhavan KHi,
Check the list of post installation steps:
http://www.saptechies.com/post-installation-steps-for-ecc-60/
From my point of view basic post installation steps are:
- Installing SAP License (from http://service.sap.com/licensekeys)
- Setup TMS (STMS)
- Import profiles (RZ10)
- Client Copy (SCC*)
- Create users (SU01)
However further many steps are required as per your requirements. Cehck the link for more detailed steps.
Regards,
Srikishan
Maybe you are looking for
-
Hello Folks, FABridge exposes all Flex functionality to JavaScript in a beautiful way. However I have a Flash project that spits out an FLA and a SWF file. I want to use FABridge to manipulate this SWF and Flash through JavaScript. Can FABridge be us
-
Production Order (Control Key)
Hi All, Scenario: At present after the MRP run, a planned order is created for materials which are to be manufactured in-house & it is then converted to a production order. A control key is being automatically selected for the operation. I would like
-
Seem to have problems selecting item - now if I double click Fireworks no longer will allow me to adit text. I have to select, then highlight with the text tool. Zoom down with alt key & mouse only drops one scale - has anyone else had this problem??
-
Hi. I'll get this short. I made a PSD template in PS CS6. This template is fully shaped. When a friend of mine who has PS CS5 opened the document. He got "this document contains unknown data (...)" allert box. Flatten the image is not an option. Now,
-
Admin, owner of folder cannot modify folder and file in it
Hi, i've created a shared folder on Mac OS X Server. I'm the admin of Server. I've enabled me and other users to read/write in that shared folder. Now a subfolder (and file) created by other users sunder that main shared folder are READ-ONLY to me (a