Video Sender kills Time Capsule Network

Hi
I have been successfully using my Time Capsule for backup and wireless access point for several months. Only problem I have is that if I switch on my Video sender so that I can watch and control my Sky Box in another room it kills my network.
I can only change my video sender channel from 1 to 4 and dont know how to change the channel of the Time Capsule base station. I understand that I need to separate the channels as far apart as possible to resolve any conflict.
Can anyone tell me how I change the time capsule channel and offer any advice on how best to resolve the conflict ?
Thanks
Rob

use Airport Utility. Select manual/wireless channel can be changed if using N+B/G but not if using N only.
Also channel must be separated by more than 1 over 4 try 1 over 11

Similar Messages

Time Capsule Network Freezes and Locks Up

I have been having major streaming issues to my Apple TV for a few months now.
Basically, the streaming performance is poor, and after 20 or 30 minutes, the movie that is playing freezes, then the entire wireless network created by the Time Capsule stops working. Anything hooked up via Ethernet however still does work. Only the Time Capsule Network fails. This happens every time I reboot the Time Capsule. I have also started over and reset the device.
I had Apple replace the Time Capsule (gen I, 500 gig), and had my cable company replace my modem. Neither one of these things solved the problem at all. It is still happening.
I have the cable modem running into the Time Capsule, then the Time Capsule runs into a router that sends wired ethernet through various points in the house (although at this time only 1 compute is still hard wired).
I have no idea what is causing this. Could this be an Apple TV issue? Why would it cause the entire network to crash?

The issue was resolved ages ago but I don't remember how....... sorry.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to print from windows 7 pc on time capsule network?

I added a new pc with windows 7 on my time capsule network. Existing network includes 2 macbook pros and 1 mac mini with boot camp and windows xp. I have been using the windows xp with bootcamp on the mac mini and printing from it for a couple years. We don't share files between the notebooks and mac mini, just internet access and printing. My bootcamp side got too full which is why I added the new windows pc (yuk) for my windows programs but I cannot figure out how to get the windows pc to recognize my printer connected to airport time capsule. I installed the printer software and drivers and connected it with usb and printed but when I connect the printer back to time capsule the pc doesn't see it. Also, I downloaded bonjour from apple site but still no go. Any help is appreciated. As you can probably tell, I only know enough to be dangerous. That's why I love my Macs, they just work!

The problem is you loaded the printer directly and now do not have it plugged in.. so delete the printer in the control panel.. then setup the printer again.. this time connect to it as network printer. The bonjour should make it available as a network resource..
Tell me if you still run into trouble doing that. You may need to load the IP of the TC manually..
Window7 has higher security level than xp.. and that can sometimes also cause issues.
Are you using SMB compliant names for the TC, wireless and printer??
Can the windows 7 computer get internet via the TC? Can you ping it?
Look up how to reduce the security level in windows to match xp.. I don't remember the details but you have to do some nifty footwork.

Computers on my secured time capsule network? How did they get on?

When I look at my Time Capsule network, I see two computers connected to it as well as myself: workgroup and macbook c66e5 (or something like that). I have Uverse and the TC has made its own network in bridge mode. I have also set up a WPA2 Personal password. The password is 19 characters long so I know it is very secure, yet somehow these two computers are on the network. What's weird, is that I cannot see these computers or my own computer on the network from my brother's mac, yet I can see him. Also, on my uverse network, I never see these other computers in the finder. Do I have a security problem or is this normal? Thanks in advance for your help!
Kyle

I suppose access to the log is yet another thing apple removed from their toyland version 6 airport utility.. if so you will need to install 5.6.. which is a bit tricky but can be done.
Download the real utility.. not available for ML so the lion version.
http://support.apple.com/kb/DL1482
Open the DMG file to see the pkg file but do not proceed further.
Download install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the pkg file of airport 5.6 utility over unpkg.. it will unpack it to the desktop in a directory.. AirPortUtility56, drill down, applications, utilities and you will find the actual utility.. drag it to your utilies directory. Now you have a REAL TOOL not a TOY.. Log is under advanced.
Then you will know what is happening instead of living in the darkness.

Can I add a NAS via ethernet to the Time Capsule network?

"I'm a PC," but am sick of spending all my time with Windows/Network conflicts and am getting ready to take the plunge into the Mac world (insert applause here).
My router/switch is old, and I want "n" wireless capability, so my plan here is to go whole hog and buy a Macbook Pro, an iMac, and a brand new network infrastructure including the 2TB Time Capsule. This way I will stay completely within the Apple family.
I have a Netgear ReadyNAS 2TB that I would like to have available as a second back-up drive on the network. It can only be on the network via ethernet (LAN). It cannot be plugged into the Time Capsule's USB port.
Will I be able to add this drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Thanks for any help anyone can offer,
Shawn

BroncoCountry wrote:
Will I be able to add this [NAS] drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
It's reasonable to expect your NAS drive to work when connected to your Time Capsule network. However, it will be difficult for you to use it for Time Machine backups. Apple only supports Time Machine network backups to the disk in a Time Capsule.
It's easy to have multiple computers backing up via Time Machine to the same Time Capsule.
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
That's up to you. Keep in mind that Apple still doesn't want you to use that USB drive for Time Machine backups.
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Yes.

I want to add more capacity on hard drive of time capsule. Can i add a normal usb driver? I will see it as an external drive in the time capsule network? It will work as fast than time capsule? Thanks

I want to add more capacity on hard drive of time capsule. Can i add a normal usb driver? I will see it as an external drive in the time capsule network? It will work as fast than time capsule? Thanks

Can i add a normal usb driver?
Yes, but be sure that the drive is formatted correctly for Mac in Mac OS Extended (Journaled)
I will see it as an external drive in the time capsule network?
The drive will appear as a shared network drive, like the Time Capsule.
It will work as fast than time capsule?
No, the drive will operate at about half or 50% of the speed of the Time Capsule.

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

Download 5.6 utility for Lion.. inbuilt version is hopeless.
http://support.apple.com/kb/DL1482
Set TC and wireless names to short, no spaces, no special characters.. ie pure alphanumeric.
Lock the wireless to fixed channels.. only 2.4ghz matters.. as iphone cannot connect to 5ghz.
Try 6, 11 first then 1. I think bluetooth may be set to use lower channels.
That seems to have fixed it for most people.

Unable to access certain web servers after creating time capsule network

Since creating a home network with Time Capsule, there are certain web sites or servers that I am unable to connect to. The browser attempts to connect, but always gets timed out.
One site, for example is a link from my fantasy football homepage: football30.myfantasyleague.com
I have no trouble with any other site, and am able to get to the address above if I connect my Mac directly with the Cable Modem, thus bypassing the time capsule network. Also, if I use my old wireless router, I am able to access the address without problem. I am also able to ping the address on my time capsule network,
I've tried accessing this site on multiple computers (both mac and pc) through my home network and using multiple browsers (Firefox, Safari, and IE). So the problem must lie with some time capsule setting (some kind of default firewall). However, I cannot find any setting on Time Capsule or Airport utilities where I could make any adjustments or view any prohibited site access.
Does anybody know why this particular site is constantly blocked when I use the Time Capsule as my router?

hamish,
Welcome to the Apple Discussion!
I'm wondering if either or both Airport Utility & Network Prefs have proper DNS server settings. Try this
Launch Airport Utility.
Select TC on left.
Click "Manual Setup".
Select "Internet" from the toolbar above.
What's listed for "DNS Server(s):"?
Try putting in these servers from OpenDNS [http://www.opendns.com>
208.67.222.222
208.67.220.220
Click "Update".
Your TC will restart with the new settings.
Next, launch System Prefs --> Network Prefs.
Select the service you usually connect with on the left (Airport or Ethernet).
Then click, "Advance..."
Click the "DNS" tab.
What's listed for "DNS Server(s):"?
Usually "10.0.1.1" will be listed first in gray. This refers back to the settings in the Airport Utility.
Nevertheless, it doesn't hurt to add the DNS servers noted above here as well.
Click "OK" then click "Apply".
Now see if you can access those websites again.
Cheers!
Message was edited by: Glenn Carter

Time Capsule: "Network name no longer available" error when copying files

Hi!
I've come upon this error when trying to copy files from my PC to Time Capsule:
"Network name no longer available".
This seems to happen only on folders that have image sequences in them (.sgi image sequences).
I was planning on transferring the content of my PCs hard drive to Time-Machine in order to smooth out the migration from my old PC to my new MBP but I have to say that I'm a little less confident about using TC as a storage space for my valuable files.
Is there a work around for this? I have tons of folders with .sgi image sequences and it would be a real shame not to be able to transfer them to Time Capsule.
Please help!

Hi… I don’t think there should be any such limitation for the file transfer wirelessly. However it can be issue, as you wired is connect at a speed of 100 Mbps and wireless connects to the max at 54 Mbps. Try to upgrade the firmware. Also try reducing Fragmentation Threshold and RTS threshold by 40 each under advance wireless settings on the router. Go to www.speedguide.net, and download the TCP optimizer. Try reducing the MTU of your wireless adapter. Please Revert Back, even if this resolves your issue.

I CANNOT PRINT FROM MY IPHONE 4 TO MY BROTHER 8890DW PRINTER WHICH IS CONNECTED TO MY TIME CAPSULE/NETWORK VIA ETHERNET CABLE???

Why can’t I print from my iPhone 4 to my brother 8890dw printer which is connected to my time capsule/network via ethernet cable??? My iPhone does not even locate my printer,even though I have no problem printing from my Mac to the same printer.

Typing in all caps indicates shouting, is considered rude and is difficult to read. Many simply do not read such posts.
You would need an airprint enabled printer or an app that proides printing function.
iOS: AirPrint 101

Extend present Time Capsule network with an Extreme

I currently have a wireless network in my house using a Time Capsule that is connected to the modem in the office. I bought a Blu-Ray player that is connected to my TV in the living room, and if I plug it directly in to a router using an ethernet cable, I can stream movies to my TV. Sooooo.....I found the old Airport Extreme I used before I bought the Time Capsule, and I would like to use it to extend my network to the living room. I have the Extreme plugged in right now by the BLu-Ray player, and the name I used for the old Extreme network is showing up on my laptop, as well as the new Time Capsule network. The Extreme is blinking amber. What do I need to do to just add this Extreme as an extension of my network so I can connect it to my Bu-Ray via a ethernet. Thanks.

Since you have the 802.11n AirPort Extreme Base Station (AEBSn), you can take advantage of the "extend a network" feature.
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Time capsule network AND modem possible with maverick?

Hey all. At home I have a small time capsule network at home and use a Huawei modem to connect to the internet. Since the update to mavericks it is impossible to run both at the same time. Now I have to choose between internet connection (Huawei) and my local network (time caps). How can I connect to them both at the same time again? Thanks.

Hi, jackthebulldog. Welcome to the forums!
What happens if you enter 192.0.32.10 into Safari's address bar? Does it still load the Comcast activation page, or does it go to a page with some text about "example.com"?
Message was edited by: adsfushi72

Video Streaming off time Capsule

Hey guys,
I have all my movies on my timecapsule and when I am trying to view them they are very choppy. Does anyone else have this problem? Any solutions?
Cheers

Hello whatsurbid. Welcome to the Apple Discussions!
Are the network clients, that will be watching the streamed movies from the Time Capsule, connected by wire or wireless. If wireless, which radio mode is the TC configured for: 802.11b/g or 802.11n only? Are there any non-802.11n clients on the network? Is there a Time Machine backup in progress when you try streaming?
For streaming video, especially 1080p, your network should be 1 Gbps Ethernet between the video server & the client. If Ethernet is not desirable/available, then the wireless ratio mode should be "802.11n only (5 GHz)" with wide-channels enabled. This would allow up to 300+ Mbps of bandwidth. Anything less than this, may be the reason you are experiencing "choppy" video performance.

Extending a Time capsule network

I would appreciate any advice on this problem, having spent whole day attempting to replace my old AEBS (11g) with a time capsule. My previous set up which has worked flawlessly for years consisted of 2 AEBS (11g) with an Airport Express as a client for streaming itunes to my hifi. I bought a 1TB TC and have replaced the main AEBS with it but although this works I cannot link it to my other AEBS to extend the network, meaning that my network does not reach all the parts it used to or needs to. My set up is a G4 Powermac connected to the TC via ethernet & I have a PowerBook & an old G4 Powerbook that I need to use on the network. Interestingly I can see the TC on the Intel PB and the old AEBS on the G4 PB but not both together! I have reset all numerous time to factory default & failed to get them communicating. I have upgraded to the latest Airport utility. I am convinced I am being dense, but previous setups with the old AEBS were a doddle!

Hello Watmax. Welcome to the Apple Discussions!
Let's double-check your WDS settings ...
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs for each of the base stations to be used in the WDS.)
o Perform a "hard" reset on the Time Capsule (TC) and a "factory default" reset on the 802.11b/g AirPort Express Base Station (AX).
Main Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the TC.
o Open AirPort Utility.
o Select the TC, and then, choose Manual Setup from the Base
Station menu.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the AX.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AX
o Click the AirPort status menu in the menu bar and choose the wireless network created by the AX.
o Open AirPort Utility.
o Select the AX, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks Using AirPort Utility.)

Video Sender kills Time Capsule Network

Similar Messages

Maybe you are looking for