Video Sidecar Files (.THM) Not Created When Video Exported As Original - They should be.

When exporting video as in it's original format the .THM sidecar file (which contains all the relavent metadata for the video) should be included so that other programs (or even Lightroom itself if using the Add to This Catalog option during export) can have access to the metadata for the video.
Here is my use case:
After importing the original video clips I would like to do the following to keep my footage clean and conserve space (as we all know HD video eats a LOT of space)
1. Trim excess / unneeded footage from the clip
2. Export the clip in it's original format with a new name (such as MVI_1234_trimmed.mov) and have it added back to the catalog during the export process.
3. Delete the original clip containing the unneeded footage.
This workflow is almost perfect in the initial LR 4 beta release except that a copy of the .THM file is not included when the video is exported. This means the new clip will not contain any metadata when added to LR or presumabley other applications. I can manuall get around this by duplicating the original .THM file and renaming the duplicate to match the name of the new trimmed clip (example MVI_1234_trimmed.THM) then manually importing into Lightroom. However this breaks the almost perfect workflow and increases time and room for error. It would no longer be an automated process which could easily be applied to clips in bulk.
Please have LR create the sidecar file with when exporting in original format or at least have an option for it!

The proposed workflow may not be valid based on the discussion here: http://forums.adobe.com/thread/947245?tstart=0 but the sidecar file point still is. Exporting as H.264 does not preserve metadata either. LR shows no camera / exposure / date time information for the H.264 version.

Similar Messages

RW-00023: Error: DBC file was not created- When try to install 11i on OEL5

I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
DBC File Check
RW-00023: Error: - DBC file was not created:
File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
HTTP Check
checking URL = http://oracleapp1.srini.co.uk:8000
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Hi JD,
I am able to fix this issue.....:-) Thanks for your help JD.
As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
above issue in the instalation of oracle 11i on OEL5
--Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
(db tier)
<DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
(apps tier)
<APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
--run the autoconfig in apps tier with completed successfully result (and also generated the DBC files)
--run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
--This time everything checked OK in the instalation wizard.

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
Windows 7 64
PC

everything works on a laptop (

PDF file is not created properly when I choose File- Print...- PDF-- Save as PDF

PDF file is not created properly when I choose File->Print...In dialogue box if i select option Save as PDF under PDF button...But it works fine with Safari Browser..
== This happened ==
Every time Firefox opened
== always

My first thought is to make sure the fonts used are common. If there is a substitution, things will be off.

"file is not compatible when import assets in dvd studio pro, my file are .mov and .mp4, what is the problem?

i have a MacBook Pro v. 10.7.5, also have dvd studio pro 4.2.2
I have a file exported from final cut v. 7, using quick time movie option, it created a file with .mov. When I import to dvd studio pro, I have an error
message " file is not compatible". shall I export again using different parm? settings? thanks for the help in advance.

Thanks, Russ. I had my problem resolved by re-creating file from Final Cut using the "Video Format" as "MPEG-4 improved" instead of "H.264" before.
My orginial source is a dvd came from Taiwan, I used software 'Handbrake' to convert it to MPEG-4. Input to Final Cut to edit it. Exported out with H.264 as Video Format, wishing to improve the image quality but run into 'file impaitable' when import to DVD SP.
Now. I exported out Final Cut using the following parms, pictures quality is not bad.
1. File format = MP4
2. Image size= 1280x720 HD
3. frame rate = 30
4. video format = MPEG-4 Improved
hope this help people who might run into same problem. I never use the Compressor, will try it next time. thanks Russ.

Can AVCHD files be not copied when imported?

When I import AVCHD files they are copied even though in the preferences I have selected "Leave files in place" and I leave that option checked in the import dialog. Is there any way to prevent AVCHD files from being copied?
Other types of files are not copied when I import them.

My exact specifications and work process:
I use two separate video cameras. One is a Panasonic HDC-TM900K; the other is a Panasonic HDC-TM700K. I record in AVCHD onto SanDisk 32 GB SD cards.
When filming is complete, I copy the entire contents of each separate SD card into its own folder, labelled according to camera and capture date.
In the past, this has allowed me to import into FCP 10.0.x and work directly with the AVCHD files without having to transcode or copy them. I have used this exact process dozens of times since the release of FCP 10.0.x.
Just this most recent time, after upgrading to FCP 10.1, while importing the same AVCHD files from the same SD cards and the same video cameras, the option to "leave files in place" was disabled.
I do understand that FCP 10.1 uses "Libraries" to organize media, and that this is a major change in how it organizes media files. I figured that this change was responsible for the difference in behavior.
I was hoping there was a way to continue to work with AVCHD card folders without having to copy or transcode.

Mod_jk.conf file is NOT created

Hi Experts,
I am using Apache(2.0.40), JBOSS(3.0.3) and Tomcat(4.0.4) on IBM AIX 5.1 System.
After spending 1 week on Integrating Apache and Tomcat on IBM AIX System (and getting HELP from you guys from Mailing List), I finally builded "mod_jk.so" file for this platform.
I also configured Tomcat's "server.xml" and "workers.properties" file BUT when I start my JBOSS engine, "mod_jk.conf" file is NOT created automatically. I refereed the following document to configure that:
http://jakarta.apache.org/tomcat/tomcat-3.3-doc/mod_jk-howto.html
Do you experts have any suggestion/information as to why "mod_jk.conf" file is not created automatically? The above document says the file is CREATED AUTOMATICALLY once you start Tomcat!
Any related information on this would be appreciated.
THANKS!
Manoj G. Kithany
[email protected]

thanks, I have since figured this one out...
What I cant seem to do is get Apache to use Tomcat to serve any jsp's.
I have spent the last three days working with this and have gotten no where. I am rather frazzled and am about to abandon the thought of using anything Java for a long time.
Let me spell out what I have done for you:
#========================================================
C:\Java\Apache\Tomcat_4.1\conf\auto\mod_jk.conf
#========================================================
########## Auto generated on Fri Sep 13 18:46:55 EDT 2002##########
<VirtualHost localhost>
    ServerName localhost
    JkMount /manager ajp13
    JkMount /manager/* ajp13
    JkMount /examples ajp13
    JkMount /examples/* ajp13
    JkMount /tomcat-docs ajp13
    JkMount /tomcat-docs/* ajp13
    JkMount /webdav ajp13
    JkMount /webdav/* ajp13
    JkMount /admin ajp13
    JkMount /admin/* ajp13
</VirtualHost>#========================================================
C:\Java\Apache\Tomcat_4.1\conf\jk\workers.properties
#========================================================
# Start setup file
#==========================================================
workers.tomcat_home=C:/Java/Apache/Tomcat_4.1
workers.java_home=C:/Java/j2sdk1.4.0
ps=/
worker.list=MyWorker
#==========================================================
# Definition for MyWorker worker
#==========================================================
worker.MyWorker.port=8009
worker.MyWorker.host=192.168.0.2
worker.MyWorker.type=ajp13
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/bin
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/common/lib
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/server/lib
worker.MyWorker.class_path=C:/Java/j2sdk1.4.0/lib/tools.jar
#==========================================================
# End setup file#==========================================================
C:\Java\Apache\Apache2\conf\httpd.conf
#==========================================================
about line# 212:
ServerName 192.168.0.2 # my internal ipat bottom of file:
LoadModule jk_module "C:/Java/Apache/Tomcat_4.1/module/mod_jk.dll"
Include C:/Java/Apache/Tomcat_4.1/conf/auto/mod_jk.conf
JkWorkersFile "C:/Java/Apache/Tomcat_4.1/conf/jk/workers.properties"
JkLogFile "C:/Java/Apache/Tomcat_4.1/logs/mod_jk.log"
JkLogLevel emerg
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
JkMount /examples/*.jsp MyWorker
JkMount /examples/jsp/* MyWorkerWhen I put this URL in my browser:
http://192.168.0.2/examples/jsp/
I get a 404 error...
Apache keeps trying to serve the *.jsp's and it fails every time it trys to do so. I know this b/c the Tomcat logs are virtually empty while the Apache logs keep being added to like so:
192.168.0.2 - - [14/Sep/2002:19:04:57 - 0400] "GET /examples/jsp/snp/snoop.jsp HTTP/1.1" 404 294
Can anybody help me figure out how to configure Tomcat4.1 with Apache 2.0?

HTTP logs not created when using software load balancer

This is my setup:
1. I have a server running a software load balancer - call it A
2. There are two servers clustered under A - call it X and Y
3. I am able to access the application deployed on X and Y through A.
Fail-over also works. Shutting down X when the application is up and running routes the requests to Y and vice-versa. All is well until this point.
Problem is:
Let us take server X.
$ORACLE_HOME/Apache/Apache/logs does not have an access log in it. (It
however has an error log.)
Access logs are not created when accessing the servers in the cluster (X and Y) through the load balancer URL.
However, when accessing the individual servers in the cluster (with their URLs), access logs are created.
Specifics on the setup:
1. A, X, Y - all three are OAS 10.1.3.2
2. All three are deployed on individual server machines
3. All three servers have one OC4J instance each running in them
4. The software load balancer used is from WebLogic 8.1sp5 - basically to create a *.war file that has the details of X and Y (servers in the cluster)
5. This *.war file is deployed on A
6. Server A, the one that has the software load balancer, DOES NOT have AS control. One of the other servers in the cluster does.
Has anybody encountered this problem before? Or is there anything wrong
with the setup? What is the resolution for the same?
Any help is greatly appreciated.
Thank you.

Thank you, Jacco. You are right in saying that the software load balancer does not route the request to Apache and hence the logs are not created.
While the logs are not critical to the component we are working on, was just wondering why they were not being created.
As regards your comment on FastCGI, there is a FastCGI directory created under $ORACLE_HOME/Apache/Apache/logs - but there is nothing in it. Neither do the error logs have any information pertaining to FastCGI.
Anyway, I am not going to worry about this issue anymore - may be sometime in the future will try to use a different software load balancer and see if it makes any difference.

Backups of the JVM.CONFIG file are not created

Backups of the JVM.CONFIG file are not created.
CF10 > Server Settings > Java and JVM in part says:
Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
CF10 Help page indicates jvm.bak will be created:
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ff c.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7feb
Note Help indicates incorrectly JVM.CONFIG and BAK are in cf_root\runtime\bin where as JVM.CONFIG is located cf_root\instance\bin .
Thanks in advance, Carl.

I must have not had enough coffee - JVM.BAK is created in where JVM.CONFIG is found. Pardon me.

What are the .fm.sp files that are created when using SharePoint?

What are the .fm.sp files that are created when using SharePoint? When I'm working with SharePoint, I've noticed that duplicate files ending in .fm.sp are created. I've been unable to find any reference or documentation about them so far.

Whe you use sharepoint as a CMS connections in Framemaker it creates the folder where Sp is installed and also a file ending .sp is created that let SP know that its the file associated with it.
.fm.sp indicates that its the framemaker type SP file.
Dont worry about it as its not creating any mess in the system.
Harpreet

Jar file: log file is not created!

Hi, I create a log file with these instructions:
//logger
          FileHandler fh = new FileHandler(LOG_FILE,true); //append mode
          fh.setFormatter(new SimpleFormatter());
          logger = Logger.getLogger(this.getClass().getName());
          logger.addHandler(fh);It works well as long I execute it normally, but when I create a .jar file and put this logger class inside logger file is not created..how come?

Hi, I create a log file with these instructions:The code extract creates a Logger object, sure, but does that mean it creates a log file? The log file creation could be deferred until the first usage of the logger...
It works well as long I execute it normally,Let's clarify: do you mean, when executing from your IDE, or when executing via a command line?
but when I create a .jar file and put this logger class inside logger file is not created..how come?Let's clarify: do you mean, when you execute the same code packaged in a jar file?
The most likely issue is configuration: apparently the various ways in which you run your program use different logging configurations.
J.

Just purchased student creative cloud to edit video. I do not see a video editing program. is PP o

just purchased student creative cloud to edit video. I do not see a video editing program. is Ptremire pro included? It appearred to be included when I registered?

Yes.
It's 64 bit only software so you need a 64 bit processor and 64 bit operating system to run it.
If you're running Win 7 32 bit or Win8 32 bit then you won't see Premiere Pro in the list of available Cloud apps. Same goes for After Effects and other video related apps.
Refer http://www.adobe.com/products/creativecloud/faq.html
Desktop apps and product updates section - which apps require a 64 bit operating system?

A passcode was not created when ipad mini 3 was first set up however it is now locked and asking for a passcode. What to do?

A passcode was not created when we first set up my son's ipad mini 3 however the ipad is now locked for some reason and asking for a passcode. What do we do?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Adobe PDF files will not display when called via a link in page (FF 4.01)

adobe PDF files will not display when called via a link in page.
This happens when testing new web page from DWeaver CS5 - all other browser tests are OK (IE9, Safari5.05, Chrome etc.)

[moved to the Adobe Reader (desktop) forum]

HT201210 what does it mean when it says the firmware file is not compatiable when trying to update

what does it mean when it says the firmware file is not compatiable when trying to update

Exactly what it says.
Is there sufficient free space on the computers hard drive?

Video Sidecar Files (.THM) Not Created When Video Exported As Original - They should be.

Similar Messages

Maybe you are looking for