Video signal lost on launch of iTunes (after "update")

I just (foolishly) "updated" to the most recent version of itunes.  And, surprise surprise, a headache has ensued.  I am using a mac mini hooked into a TV via HDMI (the setup is mac mini ---> receiver ---> TV).  After the itunes update, Weirdly, when I launch itunes, the video signal gets lost.  The application appears to start without any problems at first, but 10-20 seconds after launching, my TV goes black.  I've never encountered a problem like this before (I've had my mini hooked to my TV in this setup for some time.)  Any thoughts on how to try to address this issue would be greatly appreciated.  (If only I had this computer on time machine, I would go back an hour and all my problems would be solved.)

I had the same problem after installing Snow Leopard.
But now it seems magically fixed after updating to 10.6.2

Similar Messages

  • HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

    I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

    Not sure how this is an ipod touch question.
    Perhaps you should post in the itunes forum.

  • Lost my ability to scan after update...Hp laser jet cm1312nfi MFP

    lost my ability to scan after update...Hp laser jet cm1312nfi MFP

    The scanner should work using Image Capture, have you checked to see if the device is seen when you launch Image Capture. It  is possible the device is simply hidden and you cannot see it.
    If you cannot see it then use the Reset Printing System feature. 
    Finally if you still have no luck then you may have to pay for a scanning app, VueScan is highly recommended and can be found by clicking VueScan

  • I lost firmware in my iphone after update

    i lost firmware in my iphone after update.it always continously rebooting now. even  i change lower ios but still same problem.wi-fi,carrier features are not visible.can anyone help me out.

    put your phone into DFU mode and connect to itunes, let itunes restore your phone to latest firmware, if your phone is officially unlocked then it should restore normally else if it's carrier locked then you need original sim it came with. search internet for how to put your iphone to DFU mode

  • I lost all my phone contacts after updating my iPhone 4 to iOS5.

    I lost all my phone contacts after updating my iPhone 4 to iOS5. It's not just contacts, my photos, messages, mail and everything is gone. I did the back-up thing on iTunes too before I updated the iOS. The only thing that restored was the apps. Is there anyway to get this back?

    If you no longer have service with AT&T, I don't believe you can.

  • Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2

    Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2?

    I found that all the movies that I want on my nano have iTunes extras.

  • Sync session failed to start in iTunes after updated to iOS 7

    Sync session failed to start in iTunes after updated to iOS 7

    Restart your computer
    While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
    After you are done doing that, restart your phone.
    Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
    When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

  • How do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3

    how do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3

    Hi dreamafrombartow,
    I hope you are able to get your pictures back. Do you have a backup anywhere else?
    I did find a couple articles that may help with your recovery.
    If you need help restoring an iCloud backup
    http://support.apple.com/kb/TS4036
    iCloud: Troubleshooting missing information after restoring an iOS device
    http://support.apple.com/kb/TS4605
    Best regards,
    Nubz

  • Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • Help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen

    help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen.
    pls help me recognize my iphone4 to itunes and bring back my iphone 4 the way it was before. THANKS!

    Hi my iphone 4 is also having the same problem of hanging with the same screen reflected. itunes keep suggesting me to do a restore setting but it fails to restore after running half way. Have u solved your problem ardy..? Hw can i / we do about it...?

  • IPad asking me to connect to iTunes after updating to iOS 8.1.1

    iPad asking me to connect to iTunes after updating to iOS 8.1.1
    I have iPad which was updated to iOS 8.1.1 recently and after boot up of the iPad; it is asking me to connect to iTunes.
    Please let me know what might be the issue. Why is it asking me to connect to iTunes? How will I be able to restore the iPad to a working condition.
    Thanks in advance.

    It means that the iPad has gone into recovery mode (all software has bugs, operating system updates don't always go smoothly). You will need to connect the iPad to your computer's iTunes by its cable, and that should recognise the iPad and let you reset it back to factory defaults - you can then restore to you backup, or just resent your content to it.
    Recovery mode : http://support.apple.com/en-us/HT201263

  • Lost all contacts and data after update iOS 7.1.2, how to recover all the data?

    lost all contacts and data after update iOS 7.1.2, how to recover all the data?
    it's very important to me...

    Restore from your last backup file.

  • HELP!! Lost some of my contacts after update to iOS 7.1.2

    I lost most of my contacts after updating to iOS 7.1.2 last night!  I can't see the contact in my contact list but when I text/call they are there...what is going on and how do I restore this to see all contacts?

    It never happened to me, but try to Reset the iPhone by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears and ignore the red slider.

  • I cannot agree with the term and conditions of itunes after update ios7?

    I cant agree with the terms and conditions of itunes after update to ios 7,

    had the same issue 52 pages and no button to agree - also the send to email doesnt work either.
    go to Radio on Music app not itunes store and you can agree it there - will appear red in top right hand corner worked for me!!

  • HT1414 i lost my all contact no. after update the software, where can i restore it?

    i had lost all my contact info after update the software.
    how can i retrieve it?

    You should have been syncing your contacts with your computer all along.  They should be in your computer in whatever program you have chosen to sync.

Maybe you are looking for

  • ON ALV  Report

    Hello Friends, Below is the code and when displaying the data ,Table fields names (Column Names) are displayed properly .But when come to  VALUE_BAL_LEFT,BAL_LEFT Its not displaying any column name ,what to do  inorder to get Column heading for the a

  • How to close sidebar under ios 8 in order to use the whole screen for reading?

    How to close sidebar under ios 8 so that i can have the full screen for reading?

  • Startup Password unknown

    My laptop model c2l87UA#ABL boots and asks me for a startup password.  No idea what is is or why it now wants one.  I cant get past that.  Can anyone offer a password?  Tried a few mentioned in these posts with no luck. This question was solved. View

  • Type movement Z601 for sampling

    Hi experts, my custome has said that he wants to send some of the product materials for sampling and so he wants that they will be billing on other G/L accounts. Which are the steps to follow? So: I create a new mov.type Z601 equal to 601 but after h

  • Chapter question

    Hello. I have a question about creating chapters in iMovie 5.0.2 and then burning to iDVD 5.0.1. Here's what I have and here's what I want to accomplish, if possible. I have imported a total of about 1 hour of video into iMovie. It's from a concert b