Video sound delay

i still have NO answer as to why my iPod video's sounds lags behind by about 10 seconds after 10 minutes of watching...

i think its something to do with the new ipod updater software *version 1.1* most people say its got some bugs that affect the way videos play on the new ipod. my advice downgrade the ipod software and try adding the video on to ur ipod again. hope that helps

Similar Messages

Video/Sound delay with AppleTV on higher resolutions

I have a new Sony 55" RP SXRD HD TV (1080p max res), and just hooked up my AppleTV today. After syncing it with most of my video library and some of my music library, I tested the video appearance. My initial setting was 1080i, and I experienced major video/sound synchronization delays (similar to older DVD players where you'd hear what the person was saying 5-8 seconds before they said it on screen). This drove me nuts, so I switched down to 720p res, and while the movies played okay, the TV Shows and the Music Videos left much to be desired, and still had the same synchronization problems. To remove these issues, I finally changed the res down to 420p, but now, when I watch pretty much anything (photos, album art, TV Shows, Music Videos, and Movies), the resolution is horrible, and pixelates on my TV.
I'm trying to pinpoint this to find out if it's the TV, the connection (HDMI), or the AppleTV. Can anyone offer some advice on what to look for, what might cause this issue, and how I could fix it? Thanks so much in advance!
AppleTV Windows XP
Windows XP

Sounds to me like it's a problem with upscaler. Does the Apple TV upscale? If it does, then it's the upscaler in the Apple TV and is probably a software problem that can be fixed with a firmware update. But it's weird that if it's a consistent problem with the Apple TV upscaler that these forums aren't just soaked in complaints about it. Could be only a problem with really large, say 46" or greater TVs -- that might explain the low number of complaints.
If the Apple TV doesn't upscale, then it's the upscaler in your HDTV. Prior to about six months ago, when all HDTVs got good upscaler chipsets, some HDTVs, especially the older, larger models, had absolute trash upscaler chipsets -- even the expensive quality brand models got some bad upscalers. All kinds of problems from all input sources, but not always with every device. How old is your HDTV?
For your sake, I hope it's an Apple TV upscaler problem with larger dimensioned HDTVs, as that Apple can fix for free with a firmware update. Next best choice is your terrible upscaler chipset in your HDTV supports firmware upgrades via USB or network cable and there is a firmware update out that fixes your HDTV's upscaler problems. Because the final, worst alternative, if there is no update for your HDTV available, or your model doesn't support firmware updates, it's the really bad option: drop another couple grand or more for a new HDTV of the same large dimensions.

External display sound delay

Hello all - Surprisingly I couldn't find this in searches on the forum, so looking for input. I've got an external monitor hooked up via firewire through an HDV deck. There's the expected sound delay (about 5 frames), but how do I get rid of it? Can I buy a video card to put in the G5 with analog outputs to take care of the transcoding delay? Or is there a setting to delay the audio like in Avid? Thanks!
J

That's a better way to ask my question: How can I get video and audio to follow each other in sync to an external display and have both my computer and external monitor all play in sync?
Right now I'm monitoring audio strictly from computer line out speakers, and I'm monitoring video out through firewire via an HDV deck, so I understand why there is a delay. However, it's unrealistic for me to turn down my computer line out speakers and turn up my external monitor speakers every time I need to play back for clients.
I've tried fuddling with the Playback Controls Frame Offset, but it only delays my video playback on the computer, not the external monitor.
Surely there is a hardware solution for professional editors? A board I can purchase to install in the G5? I could throw a mixer into the mix for quick mute access, but not sure what hardware even to purchase to output from the computer for that. I'm accustomed to Avid hardware handling this, but I don't know where to find FCP hardware recommendations. Is this the right route?

Cant stream video sound from ITunes to stereo via Airport Express

I'm using a PC with wireless (Centrino 802.11g) with Itunes (Latest release 7.0.0.70) and for some reason the sound from Itunes video will not stream wirelessly to my stereo connected to my AirPort Express.
When the video is embedded in an Itunes playlist of MP3s, the sound will work fine through the AirPort Express with the MP3 tracks, but will toggle over to the PC speakers for the video.
Any ideas gratefully received?

Airtunes actually only support MP3/AAC audio streaming from iTunes. That's too bad for video.
The things is, even with other Airtunes streaming software, the streaming delay is such that the song will be off by a few second from the video. I guess Apple have choose to do not stream video sound until this may be resolve.
Therefore, I'm not aware of any solution to this issue.

Sound Delay Problem on Pavilion DV5 1138 NR

I have this Pavilion DV5 1138nr Entertainment Notebook PC, and I also have a 23" HP monitor (w2338h). It is also connected through HDMI. The only problem is that there is a horrible sound delay in the built in speakers. So basically, it's like when I go to shut down my computer, it cuts out the first part of the sound, and same when I start it up. Or if I just get an error message, it cuts out the first part. Is there any way to fix this problem?
Thanks
Oh and I'm running Windows XP Professional (x86). The laptop itself originally came with Windows Vista Home Premium (x64).

I have done all this myself! i need to figure this out asap cause i video dj using vdj and it used to work! i use my hdmi extended monitor a vizio tv that had videos playing on it and i would dj on my laptop! i've done this may times before! i had it setup ready to go did a few tracks and everything was working fine i left it as is and let the other dj go first and he was using his equipment! then when i turned my tv back on from the setting i had left them at didn't touch anything and the videos weren't working! so there has to be something that has just happened and i want to know what it was lol! my laptop shows that it has a monitor connected but, there is no video or sound that i had before! someone i need to figure it out by 11/18/11

Beats audio wireless headphones sound delay?

Is there anything I can do to stop the sound delay between my iPad (running ios 7.04) when watching videos? I have bought a set of beats audio wireless head phones but when watch live or downloaded videos there is a delay between the picture and the sound which makes watching anything annoying.

Nice extensive research on reseting Beats Audio on the HP laptops.
Just bought the Envy 17t-3000 and I updated all the drivers via HP Support Manager.
BEFORE the update, the Beats Audio worked well..
1. Press the dial and the popup box comes up ~3 secs
2. Volume indicator swirl appeared to show volume level
AFTER the update, something changed the Beats Audio... had to re-install the latest driver from HP website (even after contacting HP Tech support via chat and email several times)...
1. Press the dial and the popup box comes up ~10-12 secs now!
2. Volume indicator swirl DISAPPEARED so volume level indicator is GONE
Sure the sound works but NOW I do NOT know or remember the volume level whenever I listen to music.
You can barely tell on the Windows Speaker icon on Icon bar since 2 sound waves indicate at least 50% sound level but that's it!
I have the following softwares and checked their settings and set them all at 50% and use the Beats Audio dial to control the volume whenever the programs are used:
1. WinAmp
2. VLC player
3. MPC
4. WMP
No matter what I try, it appears that the Beats Audio Volume Control Swirl Indicator is GONE! Worse, there's NO Windows volume control indicator unless leave the Volume Mixer open!
Anyone know how to fix this problem and bring Back the Audio Beats volume indicator??
Thanks!

Video sound to TV won't run through headphones

Hi,
I have my stereo and TV hooked up to a MacMini (the 2009 slim metal one with the optical drive). I have a headphone splitter attched to the headphones jack going to the TV and the stereo. The Mini is hooked up to the TV with a mini DP connector to a DVI-to-HDMI cable (but this same thing happens with a regular DVI cable). With my old 2,1 Mini that was fine since everything ran through the headphones.
Now I want to do the same thing but iTunes I can't get the video to run through the headphones. The only way I get sound to the TV is to run it through the HDMI output (even when using the mini DP). But then I have to manually change the sound output.
Is it possible to either:
1. Have iTunes run out the headphones jack and everything else run out the HDMI? or
2. Have everything run out the headphones output?

Info to add:
When any digital video is plugged into the Mini, the video sound only works when it's set to HDMI.
To get sound to my stereo I have to switch it to headphones. Even though I have a connector going from the headphone jack to the DVI audio input on my TV, there's no sound in headphone mode.
I tried an external USB sound card and had the same problem. Just instead of headphones it was the USB soundcard.
Maybe it's my TV...

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

Hello jive
I am playing it back in the slideshow editor/setting up part of
programme where you determine photos/video to be included gaps between
slides, music to play etc This goes through each phot and when comes
to a video the background sound doesnt play, I am using windows 7 and
elements 10.
regards gins51

Video Sound through Express?

I tried searching this forum, but couldn't find any answers. I am using iTunes connected via Airport Express to my home stereo. It plays music fine, but why doesn't it also stream sound for videos through Airport Express? Is there any way to do this? Video sound only comes through my PowerBook speakers.
Thanks for any help.
Rick

No I haven't tried that, but will. I did see in Apple's Knowledge base that for some unexplained reason movie audio does not play through iTunes to Express. I did try Airfoil, but the syncing is way off. If anyone knows how to fix that it would seem to be a good solution.

Video sound over a photo.

Is there a way in iMovie HD to insert a photo between two clips and have the video sound play over the photo without the video.
I want to replace a small section of video footage with a picture, but continue to hear the audio of the video, sort of paste the photo over the video.
Thanks in advance.
Powerbook G4 Mac OS X (10.4.3)

Haloric,
In addition to Ivar's method you could try this.
If the photo already exists in your clip viewer or time line, select it then choose File>Copy. Now position your playhead where you want the photo to appear and choose Advanced>Paste Over at Playhead.
iMovie will automatically extract the video audio to preserve it.
If you don't already have the photo in your clip viewer or time line, you'll need to first bring it in to your project. Then just move it to the clip pane or just select and copy it right in the timeline.
This technique works with video clips too. Useful for a quick cut away to something else.
Matt

Video sound????

I got my iphone4 alittle over a month ago, right when I got it the first video i took, when i played it back you could barely hear the sound i tried everything but nothing worked so I figured maybe the video sound on the new iphone wasnt good until my friend got hers recently and its clear as day? What could be wrong with my sound on my video?

There's a lot of similar threads here...
http://discussions.apple.com/thread.jspa?threadID=2577629&tstart=60
Does the audio sound fine on the Voice Memo app? On mine it's clear there but static-filled or non-existent on the Camera app...
-J.-

Embedded Youtube video sound issues HELP!!

Hello.
This is my site http://mattpartridgeanimation.com/
In my 'animation' section I'm loading youtube clips to my site using this AS3 script found here.
This all works fine but when i use my buttons created in flash to load the new container_mc, the sound of the old video keeps playing. Does anyone know any AS3 script that will stop the youtube video sound playing when you click to load another video.
I'm pretty new to all this so any help would be great. Cheers

Hi,
I found the same problem but, according to YouTube AS3 API reference, I solved it with the special function:
player.destroy();
It works. Just replace "player" with the instance name of your youtube player.
Quote from the documentation:
You should always call player.destroy() to unload a YouTube player. This function will close the NetStream object and stop additional videos from downloading after the player has been unloaded. If your code contains additional references to the player SWF, you also need to destroy those references separately when you unload the player.
Best,
Toz

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do??

I had the same problem on my iPad v2 IOS 7. But it sorted itself after a hard reset (power and home button) followed by a soft rest ( just power) . I lost all sound at this point. Then restarted again with a hard reset.
Hope that fixes your iPad v2
Mo

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I manage my site (containing all the media) in order to upload it to a server?
2.- Is there a Adobe Muse community in spanish language?
Thanks for your help
Mauricio444

Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Why have I lost video sound on my ipad?

Why have I lost video sound on my ipad?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Video sound delay

Similar Messages

Maybe you are looking for