Video-sound sync problem

I have the problem that the Canon EOS 5D Mark II does not sync video and audio from the start. The sound comes before the event. I have to adjust the audio channel by moving it forward when I edit in Premiere Pro CS5. Is it a bug in the software for the camera? I have firmware version 2.0.7. The result is the same whether I use the built-in microphone or a wireless connection. Maybe not a problem with Premiere. Have more than I have had this problem?
Wiew: http://vimeo.com/13888863

What are the video settings, and what is your project preset?
Type: MPEG Movie
File Size: 1,0 GB
Image Size: 1920 x 1080
Pixel Depth: 32
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:03:04:18
Average Data Rate: 5,6 MB / second
Pixel Aspect Ratio: 1,0
Video Display format: Timecode
Audio Display format: Milliseconds (but even Audio Samples with the same resutat)
Capture Format: HDV
Preset Desciption: For editing most DSLR Formats (like the Canon EOS Movie Full HD series) recorded in 1920x1080 square pixels (non-anamorphic).
16:9 Progressive HD video at 25 frames per second. 48 kHz audio.
General
Editing mode: DSLR
Timebase: 25,00fps
Video Settings
Frame size: 1920h 1080v (1,0000)
Frame rate: 25,00 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Have you tried dragging and dropping a file on the new item icon in CS5?
No

Similar Messages

HDMI Sound Sync Problem

I've rented 5 movies and watched a couple of podcasts via Apple TV. In 5 of the 7 screenings, we've experienced problems with the sound failing to sync to the video. It's particularly bad with the Apple Keynotes. I have Apple TV connected via an HDMI cable to a Sony 1010 HD receiver, which is linked via HDMI to a Bravia 52" TV. I've tried direct hookup to the HDMI port on the TV and wound up with the same syncing problems. The receiver has a sync adjustment that I can use to get it close to sync but it's a pain and you have to stop watching the movie to **** around with it. Any suggestions?

I had an audio sync issue over HDMI when I had Settings / Audio & Video / Dolby Digital Out set to 'On' (which I had to do to get my receiver to detect the Dolby Digital Optical signal). Turning this setting to 'Auto' or off fixed my sync issues when using the HDMI audio stream.

Sound sync problem I don't understand

Hi. First post.
I have video with audio from the camera captured into iMovie. I also have separate audio from the same event through a firewire mixer into garageband exported as aif. (One of these days I'll get it all working into final cut).
My goal is to use the "firewire" audio with the video track. The video has a 10 minute gap in the middle, but the audio is continuous.
So I synchronize at the beginning, no problem. I then cut the extra audio piece out of the middle, and synchronize the beginning of the second part, no problem.
The first part is in perfect sync, beginning to end. But the second part goes increasingly out of sync the further into the timeline we go. I don't understand why the first part remains in perfect sync, but after cutting a little, the second part can't be sync'd up with the video track. Any ideas?
Thanks in advance,
Howie

I am using Final Cut Express to do the editing.
The camera video/audio was captured from a Canon XHA1 in 4:3 SD mode into iMovie, and then exported to a quicktime movie, DV/DVCPRO-NTSC 48khz.
The "high quality audio" was captured via firewire into garageband, edited for levels on different tracks, then exported to itunes, then converted to aif, 48khz.
Both were imported into FCE. I rendered the audio for playback. I don't have any red lines in the sequence (I'm a beginner at FCE).
The out of sync problem was not part of the original video clip. It is with the external firewire audio BUT only with the second part of the video... i.e. the second video clip from iMovie. The iMovie capture had two clips, exported together into the single quicktime movie that was imported into FCE.
So maybe it has something to do with the two different video clips in iMovie... but I don't know what the difference could be.

E66 with Video/audio sync problem

Is there someone where the E66 does NOT have the audio/video sync problem?
Test:
Record your finger tapping on the table, then check if Video and Audio are in sync
Mine has 1 sec or more afer a few seconds of recording

I called Nokia care,
They never heard of the problem!
They did not even know there was a firmware upgrade last feb.
Furthermore on the site, still frimware from nov last year is advertised as latest!
I will go to a service point, or return the phone to the store.

Mov to avi program, sound video import sync problem CS4, creating wide screen

I am using Premiere Pro CS4. I have edited for years on and off, most often I am on set. I just need to set this up right to work.
I have mov footage, and used Pazera to convert it to avi. It does not look right. Here are my convert questions.
1. is Pazera an ok convert program, or do you have another free, non watermark, high quality program you recommend..?
2. What is the best convert video and audio to use. Right now I have it as auto and it was awful.
3. As well I want to use a 1 to 1 ratio or lose the least info, yet it does not seem too have it. It does have, "copy original video stream" is that 1:1...? otherwise it has xvid, divx, mpeg4, wmv...
4. what is best to put for resolution, it has HD1080, HD720 HD489, and a bunch of others
1. When I did make a test avi and imported it into Premiere Pro, it does not play properly. The audio runs in realtime and the video skips forward out of sync by about 10x faster. Yet when I play the file in media player, it plays normal. Is this a setting within Premiere Pro, a problem with importing, or the original footage..?
1. As well, I have some footage with a frigin time code burn window at the bottom, and may want to grab some footage. Is there a way to wide screen the image and cut out the bottom time code, if yes, let me know step by step...
THANKS TO ALL IN ADVANCE

AAC mono 44.100
Avid DV25 4:4:1
NTSC 601 720 x 480
FPS 29.97
Data rate 28.85
Thanks. If I press "good answer" will people think that my question is all solved ..?

HT1338 When will Apple fix the sound sync problem in PhotoBooth video?

Suggestions online are
(1) reboot with cmd/opt/p/r This is not a solution but a temporary fix, a sign that Mountain Lion is not working well!
(2) reset the sound config in Audio settings. This works briefly, again a temporary fix.
Isn't it time that Mountain Lion was working?

so that means.. from itunes..or not from itunes?
sounds like 3rd party music then..
SO i would delete them from the itunes library and re add them to the itunes library.
TO test this out you should delete ONE SONG or ONE ALBUM and test that ONE SONG or ONE ALBUM only to see if they sync to the device..
are you using a windows or mac? Updated itunes?
need details on the Configuration...

Sound sync problem - unsolvable?!

Hi,
Quite a basic one I suppose: I'm editing a video source with a separately recorded sound source of the same event. The sound of the footage (HDV unfortunately) is 48kHz, while the separate source is 44.1kHz, so obviously if I sync them up at the beginning, before long they're out of sync again.
Is there any way around this? Can I transcode (if that's the right word) the 44.1 up to 48? Or should I work the other way around, bringing the 48 down to 44.1?
Is there a solution to this problem? It kind of buggers the entire project if I can't sort this out!
Looking forward to your help,
Steve

Common solution is to convert the 44k to 48, using iTunes, or you should also be able to do it in FCP...might depend on what format the 44kHz file is.
From FCP, you could do an 'Export as Aiff/16bit/48kHz', then import that file for use in the project.
I don't use the iTunes method enough to detail the process, but I remember that if I was using say...CD Audio (44kHz), I'd simply set iTunes preferences to automatically convert CD Audio to AIFF/48kHz...something like that.
Hope that helps,
K
K

IdeaTab A2107 Movie sound sync problems

Hi Guys, I have just bought the Ideatab 2107a, and first impressions its a well built device. However I have downloaded 2 differen tmovies from google play to see how the run as I will want to watch them on a forthcoming flight, but when I tried it the sound is about 15 -20 seconds out of sync making film unwatchable. Any suggestions welcomed.
I am using the standard google Play Movies v 2.4.14. I have downloaded same films on to my 10" Motorola Xoom and there are no problems..........Help !.......and thanks in advance

Hi Terry,
I contacted Lenovo and agree they are as much use as a chocolate teapot ( I doubt they would even understand that!)
I have now installed MX Player 1.7.17 and found that this works well with streamed video.
I have other 10" devices for business use, and this 2107 was just going to be used as a convenient device for watching movies on flights and quick check of emails etc, and to be honest the build quality size and price ticked the boxes especially with 3G
I Find it really sad however that the complete lack of customer care and support from an IBM company.
I also have totally redundant icons for Lenovo APP shop which cannot be installed....future support ?......not likely !!

IPod Video Connection & Sync Problem on Abit IS7 Windoze Pentium 4

Hello,
I'm posting this to help anyone else out with the same problems. I'm using a Pentium 4 2.8ghz Processor on a Abit IS7 Motherboard running Windoze XP Home and 1 Gig DDR400.
The Motherboard is equipped with USB 2.0's and 1394 Firewire ports. I got a 30 Gig Video ipod the other day and was having a nightmare connecting it and syncing with iTunes.
It was hanging painfully slow and would sometimes eject the ipod, and lock up iTunes. I tried the 5 R's on the ipod, even reformatting the ipod. Still the same deal. For Kicks I plugged the ipod into my old G3 300mhz Blue & White Powermac. And it sync'd with itunes, and mounted fast. Even with the old USB 1.1's. That's when I knew exactly where my problem was.
Today I went to Stooples and Bought a Belkin F5U219v1 3 port USB 2.0 Card. My problems were instantly solved for the cost of a decent meal..
Specs of Pentium 4
P4 2.8Ghz 800mhz FSB
Abit IS7 Motherboard
1 Gig DDR400
Radeon 256meg PCI Video
Seagate SATA 400Gig HD
XP Home SP2
Powermac Specs
G3 300mhz Rev1 Motherboard
768Meg Ram
20 Gig IDE Hard Drive
16 Meg Rage128 Video
OS 10.3.9
This drove me deeper into the insanity that already consumes my life.. I hope this will help out someone else before they too go completely nuts.

Yes all my other USB equipment works on the motherboards USB Ports. Laser Printer, Mouse, Razr Sync Cable, and a couple others too.
I was lost... When I figured out that it was the PC not my iPod I was beyond PO'd at myself for not seeing it earlier.
Here's a tip that card runs for 30 dollars, at staples Take 3 old ink carts with you, and you can knock 9 dollars off the price! It's a real screaming deal when you do that! If you see a Hp or Lexmark printer in the garbage nab the carts! Just watch your hands and clothes.
Glad to help someone else, and those two boards are REALLY Similar, they have the same disease crappy Intel Chipset syndrome. Last intel machine for me, when I upgrade I'll most likely go for a AMD, or maybe a new PowerMac If that's in the budget. At least the mac will hold its value for more than 10 minutes.

HDV exports have new sound sync problem in Quick Time

Hi
I'm on FCP 5.1.4. Prior to a few weeks ago, I've had no issue with exporting HDV files and playing on QuickTime. Now, regardless of the Quicktime Conversion I use, the exported video lags the sound. I went back to old projects and exported. Same thing. All the clips play fine in FCP. QuickTime is 7.5. I've read elsewhere people have had to downgrade to prior versions of QT. Anyone have a similar problem or have an idea what the root cause might be?
Specs of captured footage (pretty normal)
Capture video: 1440x1080
Copressor: HDV108060i
Video Rate: 29.97
Audeo: 48hz
Hope we can get some help here because I know others have the problem--and like me--are dead in the water on projects.
Thanks,
Phil

Figured out a solution. For those of you who have equipment/software similar to mine, FCP 5.4.1, IMAC G5 and QT 7.5. My project had multiple layered soundtracks. Sending to QT with any kind of compression didn't work. I wanted to ultimately get to an IPOD format. Here's what I did:
Export project as self-contained movie.
Open QT (don't just click on the file - it'll launch FCP).
Open the reference file you just made.
It'll open, but probably stutter because size of raw file; doesn't matter.
Stop QT from playing.
Choose Export; then any file type you want that's smaller.
I chose IPOD.
Works flawlessly.

Embedded Video Audio Sync Problem

I have been exporting Flash Video from Adobe Premiere
Elements 3.0. I import the .FLV into Flash 8 as embedded video. The
published .SWF works fine, audio and video start in sync and stay
in sync, but about 3/4 through the video, audio stops.
This occurs no matter how short or long the exported clip.
I did my best searching through these forums, looking for an
answer to this issue, but have had no success.

Do you need to embed the FLV file in the SWF file? I would
recommend playing the FLV as an external file. If you need to use
embedded video, make sure the frame rates are identical (SWF and
FLV). I can't remember if Premiere Elements enables you to output
with Raw audio for FLV files, but Flash 8 (or CS3) will recompress
an embedded video's audio track on publish/export--so, try to use
Raw if you can to avoid recompression. This might have something to
do with your problem too, the recompression of the MP3 audio track
in your original FLV when re-exporting as embedded video in the
SWF. (Your audio stream setttings in the Publish Settings control
the quality/recompression of your FLV output when embedded in the
SWF.)
HTH.

Video audio sync problems resolved

I've solved my audio syncing with video problems. Maybe it will help you find your solution.
I recently installed Leap Motion but it said I needed to update my video driver. I thought my driver was up to date so for both my computers that had different video cards I updated and the syncing issues were gone.
So as far as helping you get the right update I won't be of much help. But at least this will give everyone a direction to look in and find their own solution.
I hope this helps and good luck!

Hi there
In addition to what Leslie offered (which is good advice) I've seen others report success by staging the audio to begin slightly after the slide starts. Perhaps .3 .4 or .5 seconds into each slide.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Sound Sync Problems

Ok, I'm editing a project at the moment.
I was using two different cameras to film it, and a mini disc player to record the sound. It was a music concert and I had a direct input from the microphone into the mini disc player.
Now that I am editing it, I've put the sound from the mini disc over the video. It starts off fine and in sync, but by the end of the first act, about 25 mins on, the sound is out of sync by about 2 seconds. I can only assume this is because either the camera or the mini disc was recording faster or slower than the other one.
Does anyone know how I can correct this?
Thanks
Chris C

Another possibility is to measure the length of the video clip (right click the video clip in the timeline and read its Duration value in the contextual menu itself) and then open the Speed dialog for the audio clip (select the audio clip and Modify/Speed) and apply the new length to its Duration field; the audio clip length will fit the new duration. Obviously: 1. you can do the reverse (read the audio duration and apply it to the video portion), 2. for this procedure to work the video and audio clips must be unlinked (but probably they already are since they are coming from different sources).
Piero

Sound Sync Problem

I have a problem that I have not found in the forums so am posting...
I have created a project in Motion and exported to a QT file. I noticed that in the QT version that about 3/4 of the way thru the sound timing is off - by about 2 seconds or more...
When I return to the original project the timing is right on the money.
Any thoughts?
Thanks,
Tim

Hi Peter,
So you are saying export just the video then create a new project and add the video back into that?
Not sure I understand what you are suggesting...
Thanks,
Tim

24fps and 25fps on one timeline. Separate sound sync problems?

I'm editing in CS3. Most of the footage is in 25fps. But some in 24fps by accident. I have a way of changing the 24fps footage into 25fps but will this cause problems syncing sound, which was recorded separately?

Well, there's a couple of way, but from what people have said, the easiest way is to increase the duration of the 24fps footage by 4% to bring it to 25fps. Otherwise, people have suggested that some of the newer versions of premiere pro will sort the problem out automatically by matching whatever frame rate to the sequence pre-set.
Also, why is it necessary to match the frame rate of the clips ? Does it affect the editing process or the final product in any way ?

Video-sound sync problem

Similar Messages

Maybe you are looking for