Video start and media end time stamps get lost

Premiere Pro CS4  is not keeping the tape's media start and end times as well as the Video In and Out Points.
It never was a problem with earlier versions but this began the on the very first use of CS4.
I use these time stamps to keep track of the chronilogical order of the clips.
Anyone ever had this problem.
Thanks

This problem occurs after mini DV tapes have been loaded in.  It has happened with both my older panasonic AG-DVC30 and my newer AG DVX100.
It is really annoying because I count on using those time stamps to coordinate the addition to the clips into the editor.
It seems that I've lost some of the time stamps after they have all been loaded in.  Like when I start up Premiere Pro CS4  a second time on the, the next day, I find even more of the time stamps missing, over in the project pane.  I probably should carefully document that to be sure.  Could be significant in the troubleshooting process.

Similar Messages

  • Difference between IN and OUT and Media Start and Media END??  NEED HELP!!!

    As the titles states, what is the difference?
    I edited my film in preview/jpeg mode and now need to online the project to full quality. So far it hasn't gone to well. For example the media starts at 00:09:45:12. When I do a batch capture I watch the camera fly right by the time code that it should start capturing at. What am I doing wrong???
    Some files onlined easy, but there is a set from one tape that just won't sync up or capture.
    It also keeps telling me that I have time code breaks from time to time, but when I play the tapes back they look fine to me. No obvious breaks in time code from start to end.
    thanks for any help or advice

    Recapturing can be really tricky. Takes practice and it's never recommended that you try it out on a critical piece. Timecode breaks can be perceived by FCP as being caused by several things besides actual breaks in the flow of code. The most common is probably tape dropout.
    The clips that are giving you trouble, try parking the tape very close to one of the start points and recapture only that one clip.
    If your in point is too close to a timecode glitch, you will never be able to recapture it. You'll need to capture it using NOW and then recut the clip into the scene.
    bogiesan

  • What causes Firefox not to start and at those times I get this message: Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    I am using Windows 7 Home Premium 64 bit. I do not recall the problem occurring when Windows 7 was first released. This has been happening for several months now with all versions of Firefox. 3, 4, and 5. I have searched online for a solution to this problem. I have tried every fix listed here and online that I could find. The problem remains. Does anyone have a fix for this?

    The following may not completely eliminate having to terminate Firefox through the Windows Control Panel but it will come very close.
    '''Plug-in and tasks started by Firefox may continue after attempting
    to close Firefox''' The "X" in the upper right-hand corner closes the
    Window (same as Ctrl+Shift+W) but even if it is the last Firefox window,
    it does not necessarily close Firefox .
    The only '''proper way to exit Firefox''' is to use '''Exit''' through the
    File menu, not the "X" in the upper right corner of last Firefox window.
    In the Beta that would be Alt+F then X
    * '''Firefox hangs''' | Troubleshooting | Firefox Support <br>http://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
    Use the '''Windows Task Manger''' to remove all running firefox.exe in the "'''Processes'''" tab of the Windows Task Manager, then restart Firefox.
    If Firefox will still not start, remove the parent.lock file from the profile which is created each time Firefox is started to prevent other Firefox tasks from running, see<br>
    http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file
    '''Avoiding Problems with close/restart''' ''choose either extension''
    :Use to close and restart Firefox after enabling or disabling an extension, switching to a new theme, or modifying configuration files, then you don't have to worry about delay or have to look in the Task Manager to see if Firefox is closed yet.
    Both extensions use the same keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
    *"'''Restartless Restart'''" extension for Firefox 4.0+ only (2 KB download ) <br>https://addons.mozilla.org/firefox/addon/249342/
    *"'''QuickRestart'''" extension (34 KB download) <br>https://addons.mozilla.org/firefox/addon/3559/

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Shipment completion check is erasing load start and load end dates & times

    Once the load start, load end is clicked during the pack process, the system reads this just fine.  Once ship complete happens, the system is erasing the load start load end.
    We are capturing the difference between Load end and Load start as Packing time in a custom report.  Similarly the difference between Shipment end and Shipment start as Loading time.  But we post goods issue the delivery by ship complete button the dates and times are gone.  Any idea of how and where I can configure this not to disappear even after the ship complete.  Thank you.

    Have you checked the table VTTK with different fields before completing PGI? In other words you are wiping out the loading start and loading end details some how. You should have a value in your VTTk value before PGI.  Check that.
    Regards,

  • I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

    I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Change Media End Time

    Is there a way to change the media end time? I had edited a project about a year ago and I'm trying to recapture the footage to make some modifications. The original media end time, according to the project, is 01:05:15:15 but now when I try to capture it the the tape ends at 01:05:08:xx. I've tried changing the capture mode from Firewire NTSC to Firewire NTSC NDF but this doesn't solve the problem.
    The ONLY thing I can think of is I may have originally captured the footage using my Canon XL1-s but am now trying to capture using my Sony DSR-11. Could this be the problem? If so, how can I fix this issue?

    The problem is I have everything in a sequence cut exactly how I want it from a year ago so if I recapture the footage new I essentially will have to re-edited the sequence... something I'm not too keen on doing and will only do as a last resort. < </div>
    Yes, umm, duh. That is a new issue. Your original post implies you have a single media file that is giving you trouble.
    The original media end time, according to the project, is 01:05:15:15 but now when I try to capture it the the tape ends at 01:05:08:xx. < </div>
    According to my unique teleportation and extra sensory skills which allow me to not only read your mind but see your work in progress, (I like the monitor mojo, BTW, cute.), this is a fundamental drop/non-drop issue for which you will find all the assistance you need within the manuals for FCP, your Canon and your DSR11. That's not to say it will be easy to find or interpret, but it's all there.
    If you cannot convince your Sony to read Canon's timecode properly and are not able to acquire the original Canon deck, you face the interesting prospect of reassembling your project from scratch which we fully understand you are loathe to do. Looking at your timeline, I'd be irked about that alternative, too.
    bogiesan

  • Save the file and give date & time stamp

    1. Reading the Excel file from the selection screen as a parameter.
    2. Using F.M. ALSM_EXCEL_TO_INTERNAL_TABLE reading Excel file into
        Internal table.
    3. Implementing the Business Logic.
    4. Move output to Final Internal table.
    5. Final internal table should generate a Flat file. By using GUI_DOWNLOAD.
    6. That flat file should be saved with the name and location given in the Excel.
    7. When ever I run the program output file will generate in the same location but with date and time stamp. Because I’m running the program for range of employees say initially I run for 1 – 10,000 employees next 10,001- 20,000 like that.
    Whenever I run for 2nd time it will overwrite the previous output, that’s the reason I’m using date and time stamp.
    Eg:
    PERSONAL Numbers              Name                                         Location
    00000001                 xxxxx-24.04.2007-10.30          C:\        
    00000002                 xxxxx-24.04.2007-10.35
    00000003                 xxxxx-25.04.2007-10.40
    00000004                                  xxxxx-25.04.2007-10.30
    Can any one help me how to save the file and give date & time stamp through hardcode?
    please help me in this issue.

    I am not clear with your problem. Based on the understanding of your question,
    there  can be two cases.
    1- U want to insert time stamp in the output file.
    2- Time stamp is already there, u just have to solve the overwriting issue.
    If your question goes with option 2, You can make use of import parameters
    <b>CONFIRM_OVERWRITE</b> : Which will ask for confirmation before overwriting.
    <b>APPEND</b> : which you can choose either to append the data to the existing file or overwrite it.
    Please inform if the issue is not resolved.
    Message was edited by:
            BINU RAJ BINU

  • In range and coerce on time stamps

    Is there any reason why I shouldn't be able to use in range and coerce on time stamps?  In this VI the value is not being coerced, but the output for in-range is false.  With values out of range, it DOES coerce the output. 
    Jim
    LV 2013
    Solved!
    Go to Solution.

    lmtis wrote:
    What a NOOB mistake!
    Thank you nathand
    LOL The next noob minstake is forgetting to mark the person's post that solved the issue for you as the solution. 
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How PO validity start and validity end works

    In the PO Header (tab Additional data), there are fields: validity start and validity end.  The help text states the following:
    Start of validity period
    Date as of which services can be performed or materials delivered.
    In the case of purchase orders:
    Start of the period in which the service is to be performed or thematerial delivered.
    End of validity period
    Date up to which services can be performed or materials delivered.
    In the case of POs:
    End of the period in which the service is to be performed or thematerial delivered.
    I maintained a validity date range 01/01/2007 to 01/10/2007.  When i tried to receive the item with posting date 01/15/2007, the system saved the GR without even a warning message that the GR was outside the PO validity date.
    How does this field work?  Is this standard configuration or does this only work with a user-exit?
    I would appreciate any input.
    Regards,
    Dominique

    hi ,
    use transaction OMCQ,
    set the status of message for M7 163 to error. if this message is not present in the list , then go to new entries and select  this message and enter it into the list
    after this set the status to "E".
    let me know if this works
    Regards
    Mangesh.

  • Why do online videos start and stop and what to do about it

    why do online videos start and stop and what to do about it

    It usually means a slow internet connection, or inadequate hardware or both.
    It is not a 10.6 problem as such as 10.6 handles video streaming quite well.
    In your post this tag seems incongruous in this 10.6 category. 

  • Validity start and Validity End date in PO

    HI  gurus
       can you plz tell me how to activate  validity start and Validity End date in PO
    Neha

    Hi,
    It is applicable for PO done for Frame work oder with Doc type - FO(Frame work order)as its an agreement of supply of stock only between specified period.For this kind of Doc type system makes it mandatory to enter the valisity start and end date.
    Thanks

  • Add Validity Start and Validity End On PO Header

    Dear SAP,
    need your help, I am trying to add Validity Start and Validity End Field on Additional Tab in Purchase Order header.
    How do i add this field ?
    i already check on MM define screen layout a document level, but there is not setting for this two field.

    Hi Nizam,
    The validity start date & end date are used only for service orders. In configuration goto IMG>MM>Purchasing>PO>Define screen layout at document level and check into Administrative data, header of ME21N , the field selection key attached to your document type (Say NBF) and for field selection key AKTH.
    The fields Start of validity period & Validity period end of field selection key ME21N, NBF & AKTH should be set as optional then only required fields will be visible on screen.

  • Send email notification in latest start and latest end

    Hi all,
    My requirement is to send email notification on latest start and latest end. For latest start, a notification needs to be sent to the manager asking him to start processing the Leave request.
    Am not too concerned about the latest end, since the latest end takes the workitem(MODELED ACtion)  to the next manager, where I can insert a email step in the workflow.
    My concern is how can i send an email to the manager if he has not started processing the lave request within say 3 days
    thanks a ton.
    regards

    Hi,
      If you are looking to send notification ASA work item reaches a latest end then follow the below steps.
    1. Open the step for which you have set the latest end and click latest end tab.
    2. Under the same tab you will find a Drop down box you will find two entries 1 Display Text 2 Modeled  choose the 1 option. and define the text in the task description by choosing Latest End description.
    3. Choose the container element you might have populated the email address.
    Now the configuration that you need to make sure to send a mail to external email id is SCOT settings if SMTP node is configured  then this node would be sending mails to the
    Regards
    Pavan

  • Hello, i am just getting started and i cant seem to get connected to wifi

    hello, i am just getting started and i cant seem to get connected to wifi

    bulitog wrote:
    so... if on my wifi network stays at "choose a network" does that mean there is not an open wifi availble?
    If there is a list to choose from those are the names of the available wifi networks that are visible to your iPad's wifi. Some of them will be locked, you will need the password to connect to these. Some will be unlocked(open), you will not need a password to connect to these.
    If it is your own wifi network then do not leave it open. Set up a name and password in your wifi router. It will show up in your list to choose from. You then provide the password you set in the router when asked for the password.

Maybe you are looking for