Video starts, after about a minute, freezes sounds gone 5g 60gb

when i watch some videos it freezes, and the sound comes back, but this is pretty randomn wich times it comes back and wich times it doesnt, i use the imToo converter, but this problem is pretty persistant on every video i put on there.
any help?

Welcome to Apple DIscussions!
This was a problem with software version 1.1. You need to update the software to 1.1.1.
iPod Updater
Updating iPod's Software
Make sure iTunes is up to date as well...
iTunes
Finally, see this for more information on the issue you are experiencing...
Video created with third-party software plays incorrectly on iPod
btabz

Similar Messages

  • TS3354 Cannot downloading TV movies. Itune attempts download but then freezes after about 1 minute into the download.  Download status first states video will take 37 then 45 hours to download

    Cannot downloading TV movies. Itune attempts download but then freezes after about 1 minute into the download.  Download status first states video will take 37 then 45 hours to download. My computer more than meets the minimum requirement for HD downloads...not sure about the HDCP  capability

    Hi 1611kjb,
    Please refer to the solution mentioned in the following threads :
    http://forums.adobe.com/message/5396792#5396792
    http://forums.adobe.com/message/5409050#5409050

  • MMacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster

    Hi ,
    My MacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster as if the machine is running a heavy load.It displayed a question mark some time back then a friend borrwed it ,he flashed the system and put windows 7.Then a few days pasted and now it wont display as stated.I have tried to Reset SMC and the Command + P + R + Power but still no response.Please assist?
    Regrads Josh

    I think your "friend" caused a problem (or two).
    I do not know what "flashed the system" means......
    Based on what was done, I would probably erase the HD and restore the system from a backup before the software changes were made.
    Barry

  • ITunes freezing after about 5 minutes on one account, works on other accounts

    background info: I have a 2008 black Intel Macbook 2.4 GHz with 2GB RAM.
    the problem that I'm having is when I run iTunes , after about 5 minutes even if I'm not downloading or playing music, the program starts to slow down and I get the rainbow beach ball on my screen. If I'm playing music, it starts and then stops, starts, and stops. Other programs respond for about a minute, and then nothing responds, no force quit, no nothing. The only way to get my computer back is to hard restart.
    **I have a feeling that gapless playback has something to do with it, the problem started when I added an album collection of around 800 songs at once, and I did notice that it starts going through the gapless playback analysis or whatever and then freezes.
    I've tried reinstalling iTunes etc. and searching forums and websites, but all problems that sound similar are from years ago and different iTunes versions. The iTunes is the version before 10.4, I'm not sure if its 10.3 or 10.2, since I'm afraid to open it and have my computer crash again.
    One annoying fix I did was when I need to have music I made a separate account on my mac that runs iTunes fine with no problems. I had this problem in Snow Leopard, and just upgraded to Lion hoping it would fix itself, but it still has the same problem.
    If anybody has help or has a similar problem please let me know.

    Scanning from other than admin account has always been a problem for me. The only solution that I found out working is using the Vuescan software. It has something to do with that the scanning software trying to access some part of OS X that is locked to others but not for the owner (admin).
    To give the other accounts admin access doesn't help.
    //Peter

  • When listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

    Using my ipod nano -when listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • None of my iDevices can read my iTunes library after an hour of availibility. When I first start iTunes I can read the library, but after about 30 minutes my iPad's and iPhones can no longer access the library. I see it in the shared list, but no access.

    None of my iDevices can read my iTunes library after about 30 minutes. My iDevices lose connection to my library and  I have to do one of the three following things in iTunes to regain connectivity: 1. Restart iTunes 2: Stop / Start Home Services 3: Start playing a song.
    I'ts as if iTunes goes into a background or sleep mode. During the loss of connectivity my iDevices show that there's a library shared, but I cannot connect to it.

    Smae issue here, but I'm unable to get Home Sharing started again (after MAc and iOS restarts, Home Sharing on/off. etc.) This happend a few weeks ago and turngin Home Sharing Off/On fixed the connection issue b/w iPad2 5.1 and iTunes 10.6.1 running on a OSX10.6.8.
    I updated to iOS 5.1.1 on iPad2 today, watched a movie and then about 20 minutes into a 2nd movie I lost connection (Sharing tab in Video app disappeared and has not come back.) The update seems like the culprit, but odd it worked for over 2 hours before stopping, odd I can't get Sharing to work anymore (iTunes see's my iOS devices b/c I can conenct to iTunes to enter my passcod efor connecting the Remote app.) Appears to be an issue with iTunes broadcasting Home Sharing, even thougt it says it is on.

  • Zen Sleek Photo Freezes/Locks Up after about 5 minutes usage (need to drain battery to recov

    Hi,
    My 20G Zen Sleek Photo has just recently transformed itself into a useless brick.
    No matter what I try and do, it always ends up freezing after about 5 minutes usage. When you force a reset it does unlock but when it comes back on it sticks on the Creative "copyright" start up screen.
    I've reformatted and re-installed the firmware several times but with the same result.
    font face="comic sans ms,sans-serif">
    The only time it totally unlocks is when you either:
    () let the battery fully drain and then recharge it or
    (2) you disconnect the battery lead and then press the On/Off switch for several minutes.
    I've looked everywhere for a solution/reason but nothing. You find plenty of people with the same problem but no answers. Surely someone knows how to fix the problem
    Is it a faulty battery (unlikely because mine charges up fine and holds it charge well)
    Is it the hard dri've (very unlikely since the player can start up correctly [given the above recovery procedure] and play tracks within the 5-0 minutes you have available)
    Is it the firmware (I doubt it, I can't see what the firmware's got to do with a delayed lock up, having worked fine up to that point)
    Is it the motherboard (maybe....., to my mind it points to a component failure that allows an electric charge to build up and not dissipate, the only way to discharge it is to short the battery pins [with, I hasten to add, the battery removed!])
    font face="comic sans ms,sans-serif">
    Has anyone within the Creative community successfully solved this problem Has anyone received a decent answer from Creative
    I find it staggering that the guys at Creative have washed their hands of this problem. They, after all, are the most likely people to identify the problem - only they have a schematic of the motherboard that would allow them to investigate and locate the problem.
    For the record the firmware I'm using is v .0.0.
    Any guidance would be much appreciated,
    Victor

    Is there really no one with an answer to this problem or have I overlooked a previous post that explained the fault.
    BR
    Victor

  • My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts  to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

    My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts  to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

    hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
    I writ again my problem 
    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5   Software  Mac OS X Lion 10.7.2 (11C74)
    but there is no sound in windows 7  please send me a address sit for downoad driver that i can use in Afghanistan
    believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

  • My imac 17' core duo 1.8ghz a1173 freezes after about 1 minute of running

    My imac 17" core duo 1.8ghz A1173 freezes after about 1 minute of running. I re-start the imac about a half a dozen times and it stays running and will re-start from the sleep mode and will continue to operate properly until I put it in sleep mode or it goes to sleep mode. If I turn it off, I must go through the same hassle. Advise/suggestions. Thanks.

    Hello arty102
    Welcome to Apple Support Communities
    Reset the SMC > http://support.apple.com/kb/HT3964
    +1. Shut down the computer.+
    +2. Unplug the computer's power cord.+
    +3. Press and hold the power button for 5 seconds.+
    +4. Release the power button.+
    +5. Attach the computers power cable.+
    +6. Press the power button to turn on the computer.+
    Then if that doesn't help,
    Run the Extended Apple Hardware Test > http://support.apple.com/kb/HT1509
    Dennis

  • Firefox 7.1 keeps frerezing after about 15 minutes of use if I click on a website the system sticks and Freezes up. The only way to resolve it is to close and then re-open Firefox

    The problem occurs frequently and can effect any website. After about 15 minutes of surfing, I will click on a link and suddenly The word "Connecting" appears in the URL box and little circle (which used to be an hourglass) starts spinning.
    After thatI can't connect ti any website, including ones I visited moments before, unless I close down all firefox windows and reopen a new one. It then works fine for a few minutes, before it happens again

    Type in the address bar
    about:config
    Accept the warning.
    In the page that appears, in the Filter box, type
    network.http.max-connections
    Change the value to 32 (which is probably set to 256 in your case).
    Close that page.
    Restart the browser.

  • I can watch all of my old TV shows on iTunes, but the last one I downloaded jammed up after about one minute.  I tried quitting I-tunes and re-starting my computer to no avail.  iTunes won't even let me delete it so I can try downloading it again.

    I can watch all of my old TV shows on iTunes, but the last one I downloaded jammed up after about one minute.  I tried quitting I-tunes and re-starting my computer to no avail.  iTunes won't even let me delete it so I can try downloading it again. But it will let me delete other episodes.

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forum.
    Regards.

  • My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    Try a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Arch freezes after about 10 minutes with new kernel [SOLVED]

    As the title says: Arch freezes after about 10 minutes with new kernel (2.6.27). I can only move a mouse, but everything else is frozen. Even restarting X doesn't do a trick. It doesn't work at all. Frozen.
    I don't get any kind of error message (oh really?), so what's the problem..?
    Last edited by Exitium (2008-10-22 15:29:27)

    juan_sck wrote:
    Exitium wrote:
    test1000 wrote:I had an issue with only being able to move the mouse after logging in from gdm and nothing happening but i don't know if thats the same error Sooo, are you using the right nvidia drivers? their driverpolicy just changed, and we now have 4 different official nvidia drivers in repo :S
    Yeah... I'm using nvidia... So the problem is nvidia drivers, not the Linux kernel?
    Edit: My card is nVidia GeForce 8800 Ultra. I can't get driver information now, because I'm using WinXP right now. I'll check it later.
    Did you make a new install or just updated?
    You can try to reinstall old kernel with:
    pacman -U /var/cache/pacman/pkg/kernel(version you want).pkg.tar.gz
    if you made a new install you may have to install the xorg keyboard driver and so.
    By the way, there are a few diferent packages for nvidia drivers. Check wich is yours.
    Also check /var/log/ folder for errors.
    Updated kernel.
    And as I said, I'll check the driver later.

  • After Replacing Hard Drive, iMac Freezes after about 40 Minutes.

    I have a flat panel 15" iMac which had a bad hard drive. I replaced it with a 250 gig Seagate ATA drive. I used the Disck utility to format it and the computer recognized the correct size of the Drive. After installing OS 10.4.7 on the drive I found that the computer locks-up or frezzes after about 45 minute. I have run apple diagnoxtics and the computer hardware and ram checks out fine. I found that the computer does not lock up if I runit form an external firewire drive with os 10.x and it did not lock-up when I booted form the OS 9 Hardware test cd. I then thought that maybe I had loaded the OS x poorly on th e new drive so I reloaded the OS. The system agin freezes agter the system is on for about 30 + minutes.
    Do I need a special drive or size for the G4 flat panel iMac? Is there a setting on the Segate Drive I need to set.
    Any Thoughts\
    Jim
    G4 Dual 1.25   Mac OS X (10.2.x)  

    Hello,
    There should be a Master / Slave setting on the drive. If it shares the same "channel" with your CD-ROM drive, then you may need to set the Hard Drive as Master.
    Check your original drive, and see what it was set to. There is a Master, Slave, and Factory setting.
    Look at the label on the drive, and compare that to the jumpers (little caps) on the back of the drive by the data cable connector.
    Set your new drive to match the same setting your original drive was set to.
    If that doesn't work, try your new drive in the external drive enclosure. See if it works right there.
    If it still doesn't work right, then perhaps you got a drive with a defect.
    If it works fine in the external case, and you have verified that your settings are right when used internally, then you may have damage in the iMac's logic board or hard drive controller somewhere.
    But, take a look at the Jumper Settings, and try it in the external enclosure as well. See if either of those fixes it.
    Hopefully you just got the jumper settings wrong.
    I hope this helps.

  • Multicast stops after about 2 minutes

    Hi,
    We are testing IP Multicast, with Flahs media player 4.0.
    We set up the encoder and generated the manifest file.
    Multicast start, but we see lot of bufferring and video running fast.
    After about 2 minutes, the encode stops publishing to the server.
    We are using digital rapids as the encoder.
    Any idea this might be causing ?

    A few things to try:
    1. If you're using the 'multicast' application that ships with FMS4, it logs state transitions and event info to the app log as the server-side multicast relay (a server-side NetConnection/NetGroup/NetStream) start up and redirect the ingest stream from FMLE into the Flash Group. I'd recommend reading through that and verifying that the server-side objects handling the relay into the Group are happy (i.e. not disconnecting or being closed down).
    2. The multicastplayer client SWF app has some flashvars defined in the HTML shim file that loads it. One of these is a debug flag. If you set that to true, you'll get some debug info surfaced up to your UI. This will include the various events the client is processing on its NetConnection/NetGroup/NetStream that's being used to play the multicast stream out of the target Flash Group. Feel free to post those details back to this thread.
    3. If you're doing IP multicast, that won't work over the public internet. In that case you'll want to be using P2P multicast.
    Best,
    Seth

Maybe you are looking for