Video stopping on movies but sound continues !!
Video keeps stopping but sound continues during movies
I also had this happen last night around 8:30 or 9 CST. Watching 2 different episodes of Dr Who resulted in multiple occasoins of the video just freezing and audio continuing. Hitting menu and backing out of the show and back in solved it in most cases, but it seemed like it took a long time to resume. I haven't tried it yet today, hopefully it was just a glich in apple's servers. Everything else on my network seemed to be working fine.
ATv 2 iOS v 7.02
Similar Messages
-
What causes TV screen to freeze but sound continue on TV when using Air Play from I Phone 4?
First try rebooting ATV and router. Beyond that, it's probably something within the network, typically interference.
To get a report of the network go to istumbler (Mac) or netstumbler (PC). Look for signal strength and noise.
If on wifi try ethernet. -
Video keeps stopping, but sound continues
Recording works fine, but when I try to play videos it keeps stopping but the sound continues. Tried som other programs from google play, and they work tiny bit better... they also stop (makes a loading sign), but also stops the sounds, before continuing after a second or two. But on a film lasting 1 minute it will stop more or less every 4 seconds for more "loading". I've had a Sony Xperia before where there never was a problem, but this on (got a new one last week) has had a problem right form the start. Any suggestions?
Settings > apps > all > camera > clear data > restart the phone record a new video BUT make sure to save the video on the internal storage and then try to play it I've seen this before and it's a SD card issue.
-
TS3623 video is stopping but sound continues
The video is stopping and the sound continues.
I had this happen last night also, see my post here
https://discussions.apple.com/thread/5390580?tstart=0 -
I have watched a few online videos and played music from youtube this morning either through head phones or the computers speakers. The sound is now not playing through internet accessed videos/ games/ music etc that require sound but the sound continues to play through non internet accessed videos/ music etc. Wondering if i may have clicked something in order for this to happen?
Unfortunately I am not aware of any method to resolve this as in most cases simply loading up PC Suite then attempting to make use of its functions will prompt an update that leaves you with PC Companion anyway. I apologise for any inconvenience this may cause.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Video randomly pauses, but sound continues
I have an iPod Touch 32GB 3rd Gen. I have a problem where videos sometimes pause, but the sound keeps playing. It can take anywhere from 20 seconds to a minute before the video comes back.
This is happening with both podcasts and videos I've converted from DVD movies to mp4 using HandBrake.
Any thoughts?Hello,
I was wondering if you ever found out what the cause of this was? I'm having the same issue now. Using Handbreak etc.
It worked on my old iPod Touch but this new 32GB one is starting with a pause and then has random or systematic stops, can't quite figure it out yet. Any solution you found that worked?
Thanks -
After burning to dvd, using idvd, movie stops on frame but audio continues
After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!
Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results? -
Videos stop after few seconds then continue
My system is W7 Home Premium 32 bit and IE 8
Just recently I find that when I try to play a video clip (generally BBC News
but also others) the rotating circle of dots displays whilst the video is loading
but it then plays (sound and vision) for only a few seconds then stops for about
10 seconds and then resumes playing right through to the end. If I click on
'play again' it will play the complete video without any interruption.
At first I thought this was my system malfunctioning, but having set up a laptop
for a friend (using W7 Home Premium 63 bit and IE 8) the same thing is happening.
I am posting to this forum as it seems that many video problems are down to
aspects/settings of Flash Player.
All suggestions to resolve this problem greatly appreciated.Hi, I am glad you were able to get into the BBC site. You may probably know that the BBC are
forbidden to broadcast commercial advertisements in the UK, but I understand they are allowed
to do so for some of their foreign broadcasts - to recoup some of their expenses.
It occurs to me that because the news video was preceded by an advertisement, the video had
enough time to completely download before it started to play. Does that sound reasonable?
I get the feeling that my problem is concerned with buffering and the video is starting to play before
it is completely downloaded; as I said previously, replaying the video (when the whole file is presumably
in memory) it plays right through without interruption.
As I stated in my first post, viewing videos on my friend's laptop is also having the same problem.
Instead of connecting the laptop into a network, I have disconnected my own desktop Ethernet
connection from my modem and then connected the laptop via the Ethernet. That means that the
common things to both systems are the modem and the Internet connection to my ISP, which
makes me wonder if there is a problem with the modem? It will be interesting to see what happens
when I take the laptop back to him and connect via his router.
Having checked the Shockwave Flash Object I was surprised to find it is version 10.0.045.2
whereas Adobe's 'about' page informs me that I have version 10.1.102.64 of Adobe Flash Player
installed. I understand that Shockwave is installed as part of Flash Player so do not understand
the discrepancy between versions. Could the different versions cause a conflict? However
my friend's laptop shows 10.1.102.64 for Shockwave and Flash Player.
The files in the Flash folder are - Flash101.ocx, Flash Install.log, FlashUtil101_ActiveX.dll
FlashUtil101_ActiveX.exe and install.log
With regards to streaming another site I go to is EarthCam - http://www.earthcam.com/usa/newyork/timessquare/
and have no problems watching this.
Hope you may be able to deduce something from all of the above
Thanks
ollyoscar -
Stopping a Movie Clip from continuing to Play
Hi
Apologies if this has already been asked. I have two movie
clips in my FLA. The main timeline consists of 250 frames with a
stop action to end the movie on the last frame. I've noticed that
my two MCs continue playing after the main movie has stopped and am
looking for help in stopping these when the main movie stops.
I am using Flash CS3. Any help much appreciated.
GeorgeHi Cbeech
That worked a treat - I was getting bogged down with more
complex AS - it should have been obvious it was a simple stop
action.
Once again, many thanks for that.
George -
Video not playing correctly but sound on the videos does
Hey all. Question for you. Recently my iPod has decided to stop playing the videos shows. The display only shows a picture of the show title (much like the cover art of songs) and the audio plays as if it were playing normally. The files seem good because I can play them on iTunes from the iPod. I can't think of anything differently I have done to it in the last few weeks. It just stopped working suddenly. Any ideas? ANd thanks in advance.
On your iPod go to "Videos / Video Settings".
Then select "TV Out" and either set it to "off" or "ask".
Also, make sure you are accessing the video through the videos menu. If you have a video mixed in an audio playlist and you access it through that, you also won't be able to see the video. -
[Solved] GS60 - Windows 8 - Screen Goes Blank But Sound Continues
Typically about 1-2 seconds after the windows signup screen, the screen goes blank but you can still hear beeps of the pc loading. Then, only sometimes, white lines flash horizontally across the screen. My only choice at this point is to do a hard shutdown. The "MSI" logo pops up on reboot and process continues. Eventually (like after 5-10 mins. and several restarts/shutdowns from the windows login screen), the screen will work again. The screen will continue working for hours uninterrupted but may encounter the same issue. Then, it takes 5-10 mins to get the screen operational again!
Bios is latest version .106Hey lbman14,
Try updating your VBIOS if yours are not 80.04.EF.00.21, and use the latest graphics driver from MSI website first.
VBIOS: http://dl.msi.com/download_files/frm_exe/N15E-GT_80.04.EF.00.21.zip
Update Guide:http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
NV 332.38:http://download.msi.com/nb_drivers/vga/vga_nvidia_332.38_0x2bb10911_w818764.zip -
HT1551 Screen goes black but sound continues when watching netflix on apple tv
Screen goes black intermittently when watching Netflix , sound remains. Broadband is strong , not sure what problem is
That will usually indicate a network issue. First try rebooting ATV and router.
Make sure DNS is set to automatic (settings - general - network). If on wifi try ethernet. Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise. -
Can someone help? I am using windows 7
Your file is likely using MPEG-2 compression and this free software could open it:
http://www.videolan.org/vlc/download-windows.html -
Video OK in iTunes, but now stops randomly in iTouch or iPad
My wife has always used instant handbrake to convert the TV show DVD's she owns so she can watch on her iTouch. Recently all of them (even ones that were OK when previously watched) now have the video pause randomly while the sound continues.
I noticed the same thing on the new TV show I converted. The shows play OK in iTunes, but the video pauses when played on my iPad. Removed the shows, did a sync, imported the shows again into iTunes and did another sync (per Apple support to try) and this didn't help.
My wife and I are thinking the latest iTunes update maybe caused this.
Any ideas would be appreciated. I tried a complete refresh of the iPad thinking it may have been a defrag issue, but that didn't work either.I had this problem with an iPad some months ago. What did finally work was putting the iPad into recovery mode. iTunes saw it at that point. I did not actually do a recovery restore, I was able to get it out of recovery mode by rebooting it a couple of times and it has worked ever since.
-
Datasheet says Camileo P10 saves as .mov but the device saves as .avi
I just rec'd a P10 as a gift for Christmas.
Looking at the specs on the online Datasheet and elsewhere the sources say that that the P10 saves video files as .mov but the device I have can only save them as as .avi files. However the box itself does say that it saves pictures as jpg and video as avi (H.264)
And I had to search the Internet for a long time to find a safe CoreAAC Audio (FF) codec file to allow Windows Media Player to play the avi file with sound.
What happened? Why this change?
NB I did find one specification sheet online that said that the camera had both .mov and .avi formats. If this is true how do we access a menu that can allow us to switch between file formats?Hi,
i've had the same problem recently.
I have sent back my camileo p30, to Toshiba technical center, and Toshiba shipped me back a new Camileo P30 (the old one was having troubles with the sound).
My new camileo is recording in .avi with H264 compression, and the old one was recording in .mov with H264 compression.
This .avi H264 format is not compatible with my video software (pinnacle studio 12), the .mov H264 was perfectly compatible.
So it seems to be the fault of the newest firmware that encodes the video with this format.
*_If Toshiba staff could make a firmware with the old format .mov h264 , for the camileo p30, it would be great !!!!!_*
PS : I have tried with the pinnacle studio hd 14, and the problem of compatibility is still the same....
Maybe you are looking for
-
Hi, I was successfully able to deploy my auto hosted event receiver in office 365 and it was working. I did some changes on code and try to deploy it again but now it through same error always wheneven i deploy it. CorrelationId: 2ef8a311-f1cf-4ee7-
-
MacBook won't boot when iPod is connected
I have the same problem as described here : http://discussions.apple.com/message.jspa?messageID=4112865 My MacBook won't boot if my iPod 5G is connected to the USB port. If I unplug it, it will boot normally. Does anyone know what could cause that ?
-
Can't play mov file in Quicktime!!!!!!
Hi. Got a new iMac. Got Snow Leopard and Quicktime Player (incl QTP 7 in utilities). I'm trying to play a video file. It is recognised as a Quicktime movie (in file info), but when I click on it it says - "xxx.mov could not be opened, the movie's fil
-
Failure Does Not Proceed to Review
This has to be simple. I have not had the problem before. In Cap 5.5, I have one-question quiz, a T/F question. When answered correctly, the quiz results page opens. When failed, nothing happens; quiz question just sits there. I want to display resu
-
Hi folks, Why does Unity 7 insist on DVD2 when I specified English?? How do I install English only during initial install? Thanks Rich