Video stream choppy on imac G4 powerPC

Hi all. sorry if this answer was submitted before. I found some explanations but i still need to know exactly what  is going on. I have imac 20" 1.25 ghz 1gb ram 64mb geforce 5200..i am running mac os 10.4.11 tiger.....  Why is all video streaming so choppy and unwatchable? i have installed flash 10.1 , using firefox...i cant downgrade to flash 8 because the video i watching online requires flash 10.  Do i have any chances that i can fix somehow this video streaming problems? youtube is fine only on the lowest quality. I have this imac cos my laptop is broken but i did not know that is is so bad with video streaming..
I have dome some cache, history and other cleaning but it did not help.. safari is even worst than firefox.
So any suggestions good people?   

drumdancer wrote:
maximum is 1GB.
I did not try to use quick time. but how can i use quick time if i am watching for example streaming video on website.?
Make sure you are using the latest .....
RealPlayer
Flip4Mac
VLC Media Player http://perian.org
Perian (AVI and FLV support)
MPEG Streamclip
Adobe Flash Player Software
As others have reported, max out your RAM. 
Type of internet service?
Choppy YouTube Video Solution
Download the latest flash player from Adobe. After installing, repair permissions & restart your computer.
Go to YouTube, open any video and press pause (don't do this while video is playing). Click the ctrl key or “right click” the mouse in the middle of the video window. The settings for flash player will pop up.
Select the video settings then select "enable hardware acceleration."    Press close. Now RESTART YOUR  COMPUTER not just Safari if that is your browser of choice.
Good luck!

Similar Messages

  • What is the best way watch video streamed to my iMac on my TV?

    Hi,
    I'm trying to figure out the best way to watch video streamed to my iMac on my TV.  Or to watch a dvd inserted in my iMac on my TV.
    My iMac has a Thunderbolt port (among other things).
    My TV has HDMI inputs as well as a digital optical sound input.
    I'd like to know the best way to do this both wired and wirelessly.  (And if it would make sense to use an Apple TV
    Thanks for your help!

    Welcome to Apple Support Communities
    An option is to buy a Mini DisplayPort to HDMI adapter and a HDMI adapter, or a Mini DisplayPort to HDMI cable. See > http://support.apple.com/kb/ht4241
    Apart from that, you can get an Apple TV and stream the computer to the Apple TV through AirPlay Mirroring > http://support.apple.com/kb/HT5404

  • Online video streaming choppy, slow. why?!

    I recently upgraded to 10.5 for ipod functionality and better online streaming and I'm noticing that sometimes video still streams really really choppy. I'm using Firefox 3.5.7, have all the Sofwate Updates installed and still it's choppy.
    I have a fast broadband connection and 1.5gbs of RAM, shouldn't be having a problem still. What's going on?
    I was just trying to stream the Daily Show for example and it was Frozen Image -pause- frozen image - pause. VERY choppy and slow. Also, it totally slowed down the rest of my computer. There's no way my computer is too slow for that, it runs great when I'm running far more CPU intensive programs like audio editing, photoshop, etc.
    Can someone tell me what the deal is?
    Thanks.

    Usually within the download of the flash player there is an uninstaller.
    Or in the site it came from. And on the Adobe site is a page where it
    can check your computer's system to see which version is running.
    Same for shockwave. Either the uninstaller is with the download item
    in a folder when the package is opened, or it is separate. Somehow
    when I downloaded & upgraded both of these players I ended up with
    their Uninstallers, too. Some player downloads are larger in size.
    Also, I downloaded Flip4Mac's WMV player, the free basic version.
    Somewhere, I have VLC player and a few others. They can help.
    With new Adobe players, some things do improve. High-end HD video
    does require other support in rendering, to include better hardware.
    In a few cases, if some video can be paused and it loads in the back-
    ground awhile, when it resumes it may be a little better even in a G4.
    Firefox will sometimes provide a dialog box, saying it found an older
    version and asks if you want to proceed & replace it, on install. Or
    you'll end up with two in the Applications folder and the icon on the
    Dock will keep on running the older one it finds first. You can check
    to see what's there and the date/version of it. Trash older ones. All
    the bookmarks are in another location.
    There was a good deal on MacBooks in the Apple Store's special deals;
    and a fairly good 21.5" iMac. Those deals sometimes are great finds;
    unlike places who 'fix used computers' these include a basic AppleCare
    plan and have current software, too. - +{Had I not bought a used clunker+
    +car two years ago, I could have bought 4 Macs in lemon repairs alone.+
    +Yet they tell me things could be worse, I could be living in the clunker!}+
    Good luck & happy computing!

  • Slow video streaming, etc.

    I watch NHL hockey games by video streaming.  It appears they are skating in slightly slow motion, picture is herky jerky, and sometimes skips a second or so in the picture.  It used to be OK but now it is doing this stuff.  What might be wrong with my video streaming of these games.  The games are in HD - could that be the problem??  I need some help.  DZ

    webgyspy wrote:
    I agree, it's very frustrating. I read on one forum that it was a RAM issue which I just upgraded this morning and it didn't help. I'm trying to watch training videos on Kelby Training and it's driving me crazy. I feel like I'm watching one of the old Godzilla movies with the mouth not matching up with the voice. I also read a suggestion to uninstall and reinstall, and why did I think that would work? It never does. I also tried the upgrading to Safari 4.0 and nothing. It's choppy in all browsers.
    As they say on the Rush Limbaugh show, "MEGA DITTOS." We all agree, but no one seems to hear our lament and our concerns with the inadequate video streaming capability on iMac computers and with Safari...even the latest versions.

  • Internet video streaming on G5 laggy, choppy

    I have a G5 Mac Pro. Latest OSX one can put on it. Currently hooked up via DVI to HDMI to 46" LCD TV. Largely, everything works great. All sound and video and software works fine. The one problem I have run into which could be a deal breaker is that video streaming from the web is terrible. It is laggy, choppy, slow, etc. Sometimes the sound is off. The install is pretty fresh. I haven't checked to see what media apps might be installed, for example Flip4Mac. I have hunted around and heard things like Flash, Silverlight, or just that PPC processors cannot handle video streaming from the Internet. The video card seems standard and DVD and local video files play fine. All updates are installed. It is also like this when using a regular Dell LCD using DVI. Any suggestions?

      Model Name:          Power Mac G5
      Model Identifier:          PowerMac7,2
      Processor Name:          PowerPC 970  (2.2)
      Processor Speed:          1.8 GHz
      Number Of CPUs:          1
      L2 Cache (per CPU):          512 KB
      Memory:          2.5 GB
      Bus Speed:          900 MHz
      Boot ROM Version:          5.1.5f2

  • My computer will no longer stream videos? The videos are choppy and show static?

    Hello! My macbook pro just recently stopped streaming videos from facebook, youtube, hulu, etc... The videos are choppy and show static. The sound play back is fine but the picture is definitely unclear. I was hoping that there was a simple solution to this as I have never had an issue with this computer before.
    Thanks,
    Charlotte

    Thanks, Lawrence. I figured that was what I was going to have to do in the end. I have a few games with quite a few hours invested, and I worry that I'll lose the progress I have as they do not save to the cloud. I may have to bite the bullet, and just take the plunge to resolve this. I just want a way to easily transfer my "Home Computer" for my iPhone. My laptop is years old and in need of being replaced, and it's about time to upgrade my phone. These life events piling up are making me consider switching to a friendlier OS. I'm not using this as a threat. I just hope some apple high up will read this, and realize that we need alternatives. Life happens.
    Thank you both Paul and Lawrence. I clicked "This helped me" not knowing it would remove the option to choose "This fixed my problem" too. For anyone else reading this thread. Using the guide provided has done both. It has helped me and given me a fix to my current problem. Lawrence has also provided me with the last bit of information I feel is missing from wjosten's guide. That syncing will completely erase all of your data and reinstall it in one fell swoop. It's a great fix. Even if it isn't the exact one I wanted. Thank you again!

  • Video streaming on my new iMac is very slow.

    I am unable to watch any video streaming on my 2012 iMac as the image stops every few seconds. I am connected to the internet by wifi and use Safari. My system is Mountail Lion.

    ABC iview. I am unable to watch recent episodes, and yet I was able to do so with my old Mac Mini (OS 10.4).

  • Live webcam video becomes choppy after 600 connections per stream

    Hi!
    Server conf:
    2 x Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz
    16Gb RAM
    2 Gbit ethernet channel
    OS - Linux CentOS 5.5 x86_64
    FMS4 Interactive
    Live stream parameters:
    320х240
    qua_=87
    bw_=200000
    kf_=5
    fps_=18
    So, after approximately 600 connections to one stream video becomes choppy (periodically freeze, slow motions). CPU-usage at this time is 100-120% (maximum is 800%, 100% per each core), network usage is 500 Mbit/sec.
    But second live stream(with few connections) at this server looks fine simultaneously with 600 connections at first stream.
    Experiments with recommendation in "Configuring performance features" documentation chapter(enabling/disabling  aggregate messages and configure the size of stream chunks) do not help.
    Please, help me to find bottleneck!
    Thanks for answers.
    Apologisw my english.

    What Flash Player version are you using at client-side?? have you tried changing the FP to the latest (in case if you are already using latest FP, then try to switch to some previous version)  and see if this issue still remains?
    Regards,
    Shiraz Anwar

  • EA6500 Choppy Video Stream to Xbox360

    I've been viewing some videos streamed through the EA6500 from a Qnap 419p II NAS, and several video files are playing back extremely choppy.
    I can confirm that the video files play fine on the Xbox360 using a USB key and have also previously streamed these videos without any problems using a Belkin Wireless Pre-N router (that I upgraded from) streamed from the same NAS.
    I've attempted to configure the Media Prioritization feature, but haven't noticed any different results. I have also adjusted other various settings that haven't affected the playback in any way.
    My only guess is that some of the files are encoded in a format that the router is struggling with - the video files are not HD videos, and their bitrates are generally quite low - if my old Belkin router can do it, the EA6500 shouldn't have any problems either.
    Any help would be greatly appreciated! 
    Here's my router's configuration:
    - Software version: 1.0.0.145954/1.0.0.159292
    - EA6500 firmware version: 1.1.28.146072
    Thanks for reading my post!

    Hey jamay,
    Below you'll be able to find the information about the video file I'm trying to stream from my Qnap NAS to my Xbox360.
    Note that I'm not actually using the routers USB attached storage / Media Server DLNA features to stream the file, but simply streaming the file from one network device to another. The codec that the video was encoded with won't necessarily apply.
    The video does stream okay to my Home PC, but not the Xbox360. My Home PC is using a static IP address, but the Xbox is currently configured to aquire an ip address from the routers DHCP server. I might try and see if using a static IP address will change anything.
    Here's the Video File Information:
    Format : AVI
    Format/Info : Audio Video Interleave
    File size : 236 MiB
    Duration : 23mn 35s
    Overall bit rate : 1 400 Kbps
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format settings, BVOP : No
    Format settings, QPel : No
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : DX50
    Codec ID/Hint : DivX 5
    Duration : 23mn 35s
    Bit rate : 1 198 Kbps
    Width : 720 pixels
    Height : 480 pixels
    Display aspect ratio : 3:2
    Frame rate : 23.976 fps
    Standard : NTSC
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.145
    Stream size : 202 MiB (86%)
    Title : Video
    Writing library : DivX 5.2.1 Alpha (UTC 2004-09-08)
    Audio
    ID : 1
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 3
    Codec ID : 55
    Codec ID/Hint : MP3
    Duration : 23mn 34s
    Bit rate mode : Constant
    Bit rate : 192 Kbps
    Channel(s) : 2 channels
    Sampling rate : 44.1 KHz
    Compression mode : Lossy
    Stream size : 32.4 MiB (14%)
    Alignment : Split accross interleaves
    Interleave, duration : 42 ms (1.00 video frame)
    Interleave, preload duration : 500 ms
    Title : Audio
    Writing library : LAME3.92

  • Choppy video streaming...

    I'm trying to watch a live video stream on MLB.com (major league baseball).
    It's playing back one frame at a time. If it was just choppy, it wouldn't be as bad.
    Anyway, it used to work fine.
    Real Player, and Windows Media Player are both doing the same thing.
    It's also doing it when I watch it from within the browser.
    That's what makes me think that it's a computer problem rather than the connection.
    Can someone help?
    I use DSL, via my airport wireless.
    All other internet related things work fine.
    thanks.

    You mentioned in your post that you upgraded the latest firmware. So after upgrading the firmware did you reset the router? It is recommended to reset the router after firmware upgrade.  Steps to reset the router:
    Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
    After the process reconfigure the router as per the ISP setup.. Then try to do the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
              1] Open the software and go to the option which says "Router Settings"
              2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
             3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
             4] Then go to the Wireless tab, keep network mode as mixed,
     For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
     For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

  • Choppy video streaming from samba on wireless network

    Hey all,
    I have a macbook pro with leopard 10.5.7 installed. The server setup is a Linux server running samba which is wired to a wireless router. I connect my macbook pro wirelessly to the router. Everything is all set up; my computer can connect to the server and browse the files without a problem. However, when I try to watch videos stored on my server through samba, the video is extremely choppy and practically unwatchable. I know this is a wireless problem with my macbook pro because my windows desktop has no problems at all watching videos over the wireless connection and when I wire the laptop directly to the router, the video streams just fine i.e, no choppiness. I have browsed the fourms and the internet but no solution has come up yet. I was hoping someone here might have a solution.
    Thanks,
    schne1derman

    Thank God! I thought I was the only one having this problem.
    I also have a Ubuntu box with all my movies and I stream videos wirelessly from it to my macbook using XBMC (ubuntu) and Plex (mac). At first I thought the problem was the wireless G speeds from my previous router so I bought an Airport Extreme Base Station and connected it via ethernet to my existing ADSL/Wireless router on a bridge configuration. Both ubuntu and macbook are now connected at 300Mbps but I'm still experiencing occasional choppy video. The wireless connection stays up at all times so it's not a wireless connectivity issue.
    I tried NFS but the problem persisted. I also installed Windows 7 RC on my bootcamp partition and had the exact same problem. Which means it can be an issue with the Airport on the macbook. I don't have another computer with Windows so I cannot say if it would work better on a PC.
    At first I suspected the problem was with ubuntu so I posted this on the ubuntu forums: http://ubuntuforums.org/showthread.php?p=7324538
    As you can see on the description I was getting those messages on the mac logs:
    26/05/09 6:02:19 PM KernelEventAgent[198] tid 00000000 type 'smbfs', mounted on '/Volumes/MediaCenter', from '//ed@ed-linux/MediaCenter', not responding
    26/05/09 6:02:19 PM KernelEventAgent[198] tid 00000000 found 1 filesystem(s) with problem(s)
    26/05/09 6:02:19 PM loginwindow[197] 1 server now unresponsive
    At first I thought it was a problem with the arp tables on the mac. I created a static entry for my ubuntu box. Now the connection is better and the samba volume doesn't disconnect as often and when it does, it reconnects after a while. Before the arp table static entry I had to reconnect manually:
    26/05/09 6:02:32 PM kernel smbiodreconnect: Reconnected to ed-linux
    One other thing to add. Before installing 10.5.7 (i.e running 10.5.6), I had this problem and the video used to get frozen (samba share disconnection) once or twice on a 1 hour video and reconnected 15 to 20 seconds right after it. Not a big deal. Now it happens several times (5 or 6 times on a 30 minute video) and it takes around 30 to 40 seconds to reconnect.
    Message was edited by: edvar

  • Choppy video streaming after upgrading E4200 firmware to ver. 1.0.03

    Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?

    You mentioned in your post that you upgraded the latest firmware. So after upgrading the firmware did you reset the router? It is recommended to reset the router after firmware upgrade.  Steps to reset the router:
    Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
    After the process reconfigure the router as per the ISP setup.. Then try to do the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
              1] Open the software and go to the option which says "Router Settings"
              2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
             3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
             4] Then go to the Wireless tab, keep network mode as mixed,
     For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
     For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

  • Choppy and stuttering video streaming on FF but works perfect on Chrome

    I use both FIrefox and Chrome together and although I love almost everything about firefox, what frustrates me the most is the constantly lagging video streaming. I have the latest Firefox version (ver 26) and the hardware acceleration is disabled. The videos even in multiple tabs will run perfectly smoothly in chrome but if I try n run even 2 or more videos in firefox, it will start hanging and the video will start stuttering. Any way this can be remedied?

    Hey phoenixrock!
    Thanks for creating a question. I'll do my best to assist you! Upon taking a long at your system details, it seems like you have two Flash plugins installed.
    *11.9 r900
    *12.0 r0
    I'm assuming this is creating compatibility issues. That's probably why you're lagging. Follow the instructions listed http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html#main_Download_the_Adobe_Flash_Player_uninstaller from Adobe's website.
    Note: You may have to reinstall Flash by going to www.get.adobe.com/flashplayer.
    Let us know how it goes!

  • How do I control photo streaming from my iMac to my IOS devices?

    I have an iPhone 4, iPad 2, and iMac running latest versions of Lion and iPhoto.  I had photo streaming in the on position for each machine, and recently I downloaded over 1500 high res Nikon photo's from a vacation into iPhoto on the Mac.  I wasn't really thinking about the background activity with iCloud, but later I found that my memory was used up on the iPad.  When checking further, I found that all the vacation photo's loaded to iPhoto had photo streamed to the iCloud and been copied onto my iPhone and iPad.  Okay like duhh.....this is how it works, I get it now, very cool, now I have no memory left.  To make matters worse, there was no easy way to delete pictures from the photo stream on the IOS devices.....you have to individually check each pic to delete.  Lesson learned...I turned off the photo streaming from my iMac.
    But, the way I really would like to use this is to have all photo's and/or video's taken with my iPhone or iPad to be streamed into the iCloud and copied automatically to my iMac.....but I don't want the opposite to happen....ie, when I download pics from my Nikon onto my iMac into iPhoto, I don't want those to stream to the IOS devices.  Basically my iMac is the major long term storage device (with backup hard drive)...I view my IOS devices as just short term storage devices, and if something needs to be saved it should up load to my iMac.
    Is it possible to set up the devices this way with iCloud, ie, one way photo streaming?
    thanks ahead!

    iPhoto > iPhoto Preferences > PhotoStream, turn off automatic uploads.

  • E Mac too old to watch Video streaming from web?

    Hi good folks of Apple world. I am having an 'issue' with my eMac 1.25 GHz PowerPC G4 with 1 GB DDR SRAM. Mac OS X Version 10.4.11.
    Apart from a problem with the logic board (fixed under extended warranty) this has been an amazingly reliable machine. My problem now is video related, I cannot watch video streaming on the web, The feed is jerky and broken. In the UK my family watch the BBC i Player a lot. Something happened a few months ago after a security update, because before that I could watch the i Player, now we cannot. The same thing happens when trying to watch music video etc. I use Safari and Firefox, for a while we could almost watch video using Firefox, but now it's as bad as Safari.
    Is it just that my Mac is too old? I heard that the BBC were not 'supporting' Apple product?
    When watching video feed from the web at work, on a PC everything works fine?
    Love to hear any informed comment?
    Regards, Alister

    There's a variety of reasons for this problem...
    Flash - Flash is bad. One possible solution is to downgrade to v9 of Flash, as it seems to run better on these machines.
    Speed - yeah, the CPU isn't real current, so it's probably a bit of a factor - but in reality - I can watch any AVI/MOV etc, without a problem. Its only when I try to watch HD content that my eMac struggles. So, I really don't think the CPU/computer as such is to blame.
    Websites - YouTube for example, is rotten for making their site full of crap that your eMac is having to deal with as well as play the video you are trying to watch. Stuff like telling you how to buy the song that's playing in the video... or other advertising crap etc. That all doesn't help.
    BBC - I'm not familiar with the BBC's iView software/website, but for one thing, I'd be writing back and formally lodging a complaint that they don't support Apple Mac. That's poor.
    One option, painful though, is to use Safari to load the video page, then look in the Activity Log to find the video file, double click it, and download it direct to your computer. Then watch it that way using something like "VLC".

Maybe you are looking for

  • Calling a PL/SQL from VB with IN argument of object type

    I need to call a PL/SQL function in Oracle 8.1.6 from VB. One of the IN arguments is an object type (TYPE). How would I instantiate the variable of Oracle object type on VB side so that it can be passed to the Oracle? Thank you

  • G/L account balance not carried forward next year

    Dear All Expertise fourm, I found in my report(S_alr_87012277) some G/L account is not carry forward into 2009 from 2008. But in 2008 there has balance. It should come in 2009 "Bal carried Fwd". I had done some process for this but nothing change. I

  • DB_DOMAIN NAME IN ORACLE 10G

    Hi, I need to create my service_name instance.domain name. eg: hrdw.apx (dot betweek hrdw and apx). Where hrdw is my instane name and apx is my domain name.What are the steps to follow to create like this. I tried to create with net configuration , b

  • How to reverse the cancellation invoice?

    Dear Experts, Our user had an invoice document posted through MIRO: 86 GR/IR ACCOUNT     XXXX 50 Stock in Transit        YYYY- Then reverse the invoice document through MR8M, journal as follow: 96     gr/ir account                    xxxx- 83     exc

  • Smartforms to pdf without spool

    Hello, Is it possible to convert a smartform to pdf without a spool id ? I need to generate a pdf file from a smartform without print it. Thanks.