Video Streaming from multiple camera to cell phone.

I have about 5 webcams on a network in a different city. One of these webcams I have been successful at setting up live video streaming to my cell phone. However when I tried to setup and view a second camera (same model), but I cannot get it to successfully load and view. The second camera has a different access code also.
Any Suggestions?

Hi,
Camera are WVC54GCA
Router is a WRT300N.
Like I stated earlier, one of these cams I can stream fine to my backberry storm,(Port 554 is forward to the ip address of the camera) but can't seem to configure the other for cell phone viewing.
All cameras can be viewed via http via computers.

Similar Messages

How to acess a PTC camera video stream from DVR card/PCI-slot

I have a security camera which i connected to PC using PCISLOT/DVR Card.
My requirement is to get the video stream from this camera and show in my program using java
if it is possible using java and how to do this.
Thanks in advance

Believe it or not, this isn't really a Java question. You should begin by looking around your camera manufacturer's website for Java APIs, then their forums if they have any, contacting support and so on. Hoping that a general Java community will know exactly what is required here is a bit pie-in-the-sky.

Stream video in real time to a cell phone.

Hi, thanks for everyone and first sorry for my poor english. i dont speak this language.
I need stream video in real time to a cell phone. Anyone can tell me what can i do to program it? the server is a desktop application to capture video with a laptop
camera. what device can i use? is posible program it? thanks for your help.
Thanks from caracas venezuela.

fiannolo
Please don't post in old threads that are long dead. When you have a question, please start a topic of your own. Feel free to provide a link to an old thread if relevant.
I'm locking this thread now.
db

HT3819 video stream from amazon prime to my TV

i want to video stream from amazon prime to my TV via my ipad, mac book using my apple TV device..

there is no reason to get rid of Apple devices, not when a Chromecast, Roku, or FireTV can be acquired so cheaply.
This is a true statement, but this is a bad option in the long term since your content will be split between different sources, DRM rules, apps, access options, etc. You are going to constantly be running into issues were you want to watch a show that is not available on the device (phone, tablet, etc) you are on. I share "Disgusted_with_apple" frustrations in that Apple has not updated in three years now leaving Amazon FireTV and others with better interfaces and features but having my content locked into Apple's DRM.
Apple was really first to market with a viable TV interface device, and has completely turned the market over to its competitors just by not showing up. And now ATV can not play content, or provide features that ALL of the competitors have. I recently bought an Amazon FireTV and love it. The only advantage Apple has left is the iTunes Store still has more content, but that is not likely to last.

Do I need multicam in order to create a movie from multiple cameras?

Do I need multicam in order to create a movie from multiple cameras? The old fashioned way is just to simply put multiple video clips into multiple video tracks in Final Cut, right? Then I can transition the tracks as I see fit.
Multicam in Final Cut Pro simply improves upon this by hard synching timecodes right?
As an amateur, do I really need multicam features in Final Cut Pro in order to make a movie from multiple camera angles?

Will it make your editing tasks more efficient? Not
likely. Multicam is an advanced feature of FCP. It
requires knowing how most of the application's basic
operations are performed.
I have to disagree with bog in that multicam is all about efficiency and being able to quickly set-up and edit what could normally take a lot longer. But he is totally correct in that it is a strange set-up with some strange behaviors so if you don't know what you're doing and plan accordingly it could take a lot longer and be a lot more frustrating than the 'old fashioned' way.
I think it's also important to note that multi-cam is way more than just the "real time" switching of the multiclip in the viewer as it plays back. If you can take time to learn the ins and outs of multi-cam then you can use some features on some jobs and other features at other times. An amateur can do anything that the FCP software because it's there in front of you so play play play!

How Do I Download Pictures From My Samsung M320 Cell Phone

Does anyone know how to get the pictures from the Samsung M320 cell phone into iTunes? I tried a USB cable but the computer doesn't seem to want to connect to the camera and do anything with it. I tried Bluetooth and while I seemed to be able to connect it to my iMac I couldn't really seem to do anything with it. I called the store I bought it from and they seemed to think the only way was to use the send picture feature which as far as I can tell I have to pay for and can only send one photo at a time. The phone does not seem to have any remoovable card or anything that the pictures are on.
Any advice?

http://datapilot.com/productdetail/89/producthl/Notempty/
That and an actual "data cable" compatible with this phone did the trick. Previously I had a "USB charging cable" from WalMart which is apparently only good for charging not for data. With Datapilot I am able to download the pictures to my hard drive. It can also work with phonebooks and calendars to some extent but I don't need to do that yet and so can't speak as to that capability.
Cheers!

Can I see video stream from a website on my tv from my desktop with apple tv

I am trying to watch a weekly video stream from a website using my Mac desktop on my tv with Apple Tv..can I do this?

If your computer is a Mac and new enough (2011+) then maybe. See required specs here:
http://www.apple.com/uk/osx/specs/
If you have an older Mac or Windows machine try airparrot.
AC*

Streaming from multiple user accounts......problem

With my initial set up I had no problem. I have a large iTunes Library. 48k songs. Over 270 GB of files. I synced a few photos and some music for the AppleTV slide shows but everything else I was going to stream. Streaming is working wonderfully from MY user account but if I try and stream a similar sized library from another user account on the same computer it is "NO JOY". I get the "loading library" dialog with the little circle of dashes going round and round but it eventually gives up and does not load. I have tried this with iTunes running on my user account and with iTunes turned off on my user account and either way the library from the other user account will NOT load. I am at a loss here. The set up for the second user went smoothly. I clicked add a library and got a key code on my TV screen. AppleTV showed up in the devices column in iTunes of the second user account and accepted the key code but like I said earlier the library will just not load for streaming. Streaming from my first user account is still working well. I have not found any discussion topics dealing with streaming from multiple user accounts. Hopefully someone who is doing this will chime in and help me out if possible.

The only way I have been able to get this to work is to quit the iTunes that I am currently streaming from. Switch (on the computer) users to the library I want to stream from. Start iTunes on that user. If I follow this I can get AppleTV to load the library of the second user. If I do NOT quit iTunes from the first user it will not load the second user's library. If I have iTunes from the second user running at the same time I quit the first user's iTunes it will NOT load the second users library. I guess it is a bug and will need to be fixed with the next software release. I would like to be able to switch among user libraries at will and independent of which user is currently using the computer.

I'm having trouble with video imported from my camera memory card.

I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.

More info please:
Type of camera?
Was the card formatted in the camera doing the shooting?
Type of files the camera is set to record?
Al

Video streamed from YouTube using the Apple Composite AV Cable

I used to have video streamed from YouTube on my iPad to my TV using the Apple Composite AV Cable, this was in previous versions till the iOS 6 release, then YouTube no longer streams video through this cable :'(
Very annoying really to miss a feature through a software upgrade!
Please help me.

Looks like the connector that goes into the iPad doesn't precisely connect all pins and lock the whole thing in place as well as we would think an Apple-branded product would. I discovered after four hours that if I pull my AV composite cable from the iPad without turning the iPad off (not the Apple recommended way - perhaps there's a better way, like replugging with it off?) and plugging it back in, *poof* I get video again. Now, Netflix still isn't working, but U-Tubes and photo slideshows are back with awesome-quality sound. I believe I'll get similar results when I try this on my iPhone 4.
I guess Apple TV is really the only way to get the luxury back of being able to stay focused on your entertainment and not this equipment because this was spozed to be a movie nite for me four hous ago. I just wish Apple TV had as much content as the Roku.
Anyway, just plug and re-plug, but don't be too hard on it. You might also have to turn widescreen off and back on again.

IIS7 configuration, blocked broadcast video stream from third party host

I have a client that recently replaced a windows server 2003 with windows server 2008 R2 as their webserver. This was a big change to IIS7. An application that I developed for them has stopped working and I believe this is related to the IIS7
configuration. The application uses SilverLight technology to display a broadcast video along with some powerpoint slides.
Here is the URL going to the server from a link on an html page.
http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
The iiscast.wlf.org is the public name for the IIS server. When we click on the link it does properly display the start.html content but fails to connect to the video stream. The video stream is hosted by a third party and the contents of the
unit2.asx file has the url for that video stream. When a put the
http://iiscast.wlf.org/vod/broadcast/unit2.asx portion in IE it does properly display the video stream on mediaplayer.   All this worked prior to moving to the new server. When I use F12 in IE to debug this, I see a brief message appear
in the debugger that it is opening unit2.asx. After that the debugging is very limited except I know I’m getting an exception in the silverlight and the video doesn’t display.   Other similar Silverlight apps on the same server that display
archived video are working.
Here is the content of unit2.asx
<asx version = "3.0">
<Title>Unit2 Bdct</Title>
<entry>
    <ref href = "http://easylink.playstream.com/winlive/wlforg2.wvx"/>
</entry>
</asx>
Playstream is a video stream hosting company. When someone links to them, it pulls the video stream from my clients media server broadcast point.
wlforg2.wvx contains the link back to the media server broadcast point at my client.
We have a lot of connections going on but keeping in mind that http://iiscast.wlf.org/vod/broadcast/unit2.asx will display the video and
http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
Is not displaying the video although all this worked on the old server.
My guess is that something in the IIS7 is blocking this process.
FYI the old server completely died so I can’t look into its configuration which was done in 2004 by someone else.

This was entered in the iis.net forum as suggested. The problem has been resolved. The hosting service determined they had an edge server that was faulting. Their edge servers were automatically assigned by geography which meant
that depending on how/where we accessed the system for troubleshooting we used a different edge server. Hence some tests always failed and others always passed. FYI the hosting service had this problem for over a month and did not detect it
themselves. Fortunately we connected with a dedicated service technician late on a Saturday night and he figured it out.

I have a video downloaded from my camera in iPhoto and I wish to freeze frame one shot and make it a photo that I can save and print. Any way to do this on my Mac?

I have a video downloaded from my camera in iPhoto and I wish to freeze a frame of the photo and make it a picture to be saved and printed. Can I do this on my Mac?

Open the video in QuickTime Player.
Scrub to the frame.
Edit/Copy.
Open Preview.
File/New From Clipboard.
File/Save...

EA6300 cannot video stream from computer to Ipad on my local networt

I was previously using Video Stream (from Connect3) to stream videos from my computer to my Ipad with no problem. I was using a WRT400n and now have upgraded to the EA6300. Now my Ipad can no longer acces the server on the computer. I tried port forwarding but that didn't work. I assume that some setting(s) on the router is blocking it. The computer is connected to the network using usb wireless. It was connected via cable when using the 400n.
Computer IP 192.168.1.118, ipad IP 192.168.1.40. Does anyone have any idea why the Ipad and computer cannot connect?
Solved!
Go to Solution.

Are you able to stream videos to ipad if you connect the pc to router using ethernet only? It may need driver update if it works fine when the pc is directly connected to router using ethernet.
I can see that your router detected the ipad twice in the device list. In this case, try turning off your ipad. Once it is offline, remove it from the device list. Turn it back on, then go to connectivity and select local network. Click on DHCP reservation and reserve the ip address of the ipad. Check is streaming works after that.
You may also need to check if the router's firmware version is up to date. In the Connectivity>Basic tab, click on check for updates button. Proceed with the update if it prompts for it.
Another cause of this issue could be your Video Stream app. Try uninstalling/reinstalling this app or you may also try other video streaming apps like twonky.

ATV2 - 4.2.2 Update - Video stream from desktop quits after 2 minutes

ATV2 - 4.2.2 Update - Video stream from desktop quits after 3 minutes after most recent ATV2 software update
ATV2 is connected wired to router, desktop is 802.11n

Reset ATV2, router, and desktop machine and everything appears to be working normally now.
False alarm.

Saving video stream from webcam periodically!!!

Hi there, I want to catch every 1 minute video stream from the webcam, or video file, and save it into separate files. Of course I woudl like to have possibility to save many streams simultaneously. Any idea?
Best regards

Hi,
I want to do the same thing ... I was able to stream audio through the socket but could not stream video.
I posted my question at http://forum.java.sun.com/thread.jspa?threadID=674676&tstart=15
and presented a sketch of my implementation design. But until now no one has answered my question.
This is how you should hook up the components on the transmitter side
Webcam --> Processor --> Custom DataSink --> PushBufferStream --> PushBufferHandler --> Socket --> Network.
You can implement the transferData() method of the PushBufferHandler to write to a socket.
And on the Receiver side the components should be hooked up like this
Network --> Socket --> PullBufferStream --> custom DataSource --> Player
Now as I mentioned in
http://forum.java.sun.com/thread.jspa?threadID=674676&tstart=15
the audio works fine but the video does not. The video does not render on the receiver side.
Note: I tried TCP sockets with audio and it is terrible (not practical at all) so I reverted to UDP datagrams and the result was better than I expected. I didn't take care of the ordering of received packet at the receiver but it still worked fine.
I am still looking waiting for some help in why video is not rendering and how can I sovle this problem.
I am workning on a project and time is running out.
Any help?
-Adel

Video Streaming from multiple camera to cell phone.

Similar Messages

Maybe you are looking for