Video streaming using third-party wireless connection

Hey,
I just loaded a new website (www.j3motorsport.com) and it has flash movie
banner on top, which stops playing while its loading. I have the same problem watching videos on youtube.com. Are there any settings in Airport Extreme I can adjust to speed load time up? any help would be welcomed.
Best,
Michael

Welcome to the discussions.
This really depends on the type of connection you are
using, more than anything else.
If you are on Dial up that, I am sorry to say goes
with the territory.
You shouldn't be having a problem over DSL or Cable.
The transfer rate on the Airport Extreme Base is not
the issue.
It may also be a direct result from the type of
player and the settings used. Many will offer 56k or
DSL, or Cable settings when viewing video content.
It could also be caused by the developer of the site,
and what format they used to render there projsct and
the technolgy, Real Player, Windows Media Player,
Quicktime, Macromedia Flash,
On some occasions you may have to download there
players to get the video to work as well.
Cheers Don
Don,
Thanks for the response. I'm using cable internet, and the site is one I had developed. the flash banners in that site are made with flash 8, and they stream fine over my direct DSL connection at my office. I haven't tried directly connecting here, because I'm afraid I'll screw up my wireless settings. any advice?
Thanks again,
Michael

Similar Messages

  • IIS7 configuration, blocked broadcast video stream from third party host

    I have a client that recently replaced a windows server 2003 with windows server 2008 R2 as their webserver.  This was a big change to IIS7.  An application that I developed for them has stopped working and I believe this is related to the IIS7
    configuration.  The application uses SilverLight technology to display a broadcast video along with some powerpoint slides.
    Here is the URL going to the server from a link on an html page. 
    http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
    The iiscast.wlf.org is the public name for the IIS server.  When we click on the link it does properly display the start.html content but fails to connect to the video stream.  The video stream is hosted by a third party and the contents of the
    unit2.asx file has the url for that video stream.  When a put the
    http://iiscast.wlf.org/vod/broadcast/unit2.asx portion in IE it does properly display the video stream on mediaplayer.   All this worked prior to moving to the new server.   When I use F12 in IE to debug this, I see a brief message appear
    in the debugger that it is opening unit2.asx.  After that the debugging is very limited except I know I’m getting an exception in the silverlight and the video doesn’t display.   Other similar Silverlight apps on the same server that display
    archived video are working.
    Here is the content of unit2.asx
    <asx version = "3.0">
      <Title>Unit2 Bdct</Title>
      <entry>
        <ref href = "http://easylink.playstream.com/winlive/wlforg2.wvx"/>
      </entry>
    </asx>
    Playstream is a video stream hosting company.  When someone links to them, it pulls the video stream from my clients media server broadcast point. 
    wlforg2.wvx contains the link back to the media server broadcast point at my client.
    We have a lot of connections going on but keeping in mind that  http://iiscast.wlf.org/vod/broadcast/unit2.asx will display the video and
    http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
    Is not displaying the video although all this worked on the old server.
    My guess is that something in the IIS7 is blocking this process.
    FYI the old server completely died so I can’t look into its configuration which was done in 2004 by someone else.

    This was entered in the iis.net forum as suggested.  The problem has been resolved.  The hosting service determined they had an edge server that was faulting.  Their edge servers were automatically assigned by geography which meant
    that depending on how/where we accessed the system for troubleshooting we used a different edge server.  Hence some tests always failed and others always passed.  FYI the hosting service had this problem for over a month and did not detect it
    themselves.  Fortunately we connected with a dedicated service technician late on a Saturday night and he figured it out.  

  • Connecting ibook g4 with third-party wireless network

    i've got a ibook g4 with an airport extreme card that i'm trying to connect to a third-party wireless network. When i am right beside the router, it works at about 75%, but I walk 15 feet away and the signal is totally gone. the computer the router is hooked up to is a PC, and so are the other three computers in the house that access the wireless network. The PC's are all further away from the router, yet they can still get a basic signal. Why is my mac not working with this and what can i do about it?
    router: d-link 802.11g/2.4Ghz
    my ibook: g4, 14", superdrive

    You can verify that the antenna wire is properly attached to the AirPort Extreme card. See the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

  • Is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application?

    Hi,
       we are developing one enterprise application specifically for iPad.Kindly advise me is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application (slide show with images)?
    Thanks in advance.

    Thanks Terence for your reply. I mean  for "the iPhoto slideshow video" is : I have collection of my own images , using iPhoto software i created a slideshow based on 'origami' theme and exported as a video file. Can I use that video in my enterprise iPad application?
    Thanks.

  • Connect AE to third party wireless router

    Hi all,
    Here's what I'm trying to do:
    I have a Airport Extreme base that I want to connect to a non Apple wireless router (ISP wireless router). Anybody managed to do that?
    I tried setting up the base as WDS connnecting to my third party wireless router but without any success. I can make all the connections, save my AE settings, but when I choose the newly set AE Base, I'm not connected.
    Help would be greatly appreciated.
    Thanks.
    g

    Most likely not, as very few non-AirPort routers can be extended with the AirPorts in a WDS. (ref: http://www.dd-wrt.com/wiki/index.php?title=WDSLinked_routernetwork)
    You can, however, connect the AirPort Extreme Base Station (AEBS) to most non-AirPort routers, via Ethernet, and then set up the AEBS as a bridge.

  • Airport Extreme and third party wireless routers

    I have a dual-band Airport Extreme that works well with all of my newer Macs. I have older laptops, however, with PCMCIA wireless cards that can't do WPA2-Personal security, only WEP. My only solution has been to set up a Guest network with no security. Is it possible to connect a third-party wireless router to the Airport Extreme that offers WEP security?

    Are you trying to setup the Belkin router to use the same wireless network name as the AirPort Extreme network?
    That would require that that the Belkin's network use the same security.
    If this is the case, try setting up the Belkin with a different wireless network name. Unless the Belkin is really limited in features, you should be able to choose the type of wireless security to be used on this Belkin network.
    If you can do this, "point" your WEP device at the wireless network that the Belkin is producing and the signal will bridge when it reaches the AirPort Extreme.
    Regading your question about connecting a router to the ethernet port on a computer that is already setup for Internet Sharing...this is not likely to work. I very much doubt that you would be able to get an Internet connection with this type of setup.
    Message was edited by: Bob Timmons

  • Third Party Wireless

    Hullo all,
    Is there any way to connect a third party wireless device to a mac? Specifically I am talking about a MacMini G4 (bought june/july of 2005) using a Ashton Digital AirDash USB stick. I can plug it into my mini and it lights up but I am not sure how to make the mini utilize it. I have tried the IOExperts Drivers to no avail. I know the stick can be used my the mini (using KisMac) but I do not know how to use it to connect to the internet.
    Thanks for any help
    Tom Johnson

    Alternitavely, you said that it works
    with KisMAC, so you could try and find out what
    driver KisMAC is using to make the card work and
    apply that driver.
    This idea seems to be the best or rather the only one that will work, unfortunately I have absolutely no idea as to how to do it. KisMAC uses the USB PRISM II driver and only in passive mode. (I am not sure if that makes a big difference) Anyway I have no idea where OS X puts its drivers. I've looked in the console application and it calls the drivers USBIntersilJack and specifically uses the lines:
    2007-03-11 23:29:01.966 KisMAC[336] USBIntersilJack is now ready to start working.
    2007-03-11 23:29:02.307 KisMAC[336] USBIntersilJack: Detected a Prism2 card
    2007-03-11 23:29:02.345 KisMAC[336] USBIntersilJack: Firmware vendor 31, variant 6, version 1.5
    2007-03-11 23:29:02.346 KisMAC[336] USBIntersilJack: MAC 0x0 0xa 0xe9 0xa 0x81 0x79
    when it is loading.
    You need to find a Mac Compatible driver. If there is
    one for the usb stick, it will probably be on the
    Ashton website.
    As for finding a mac compatible driver i think chances are nil. I've tried everything from open source to the DLink 1.47 driver. Either they do not work or I am to noobish in this area to know how to get them to work properly.
    Any other ideas?
    Thanks
    Tom

  • Help With Third Party Wireless Cards

    Hello, I am needing some help with third party wireless cards. I have purchased and installed the Linksys WMP54G wireless PCI card into my G4. From what ive seen on the discussions page here, this card is known to work with the G4s in place of the more expensive Airport Extreme card. The only problem is that my G4 doesnt even recognize that the card is in the PCI slot. Ive tryed the other PCI slots and still nothing. Previously, i have tried using a belkin and a d-link card that have been known to work in the G4s as well, and had the same problem. I am 100% sure that the card is seated correctly, and cant think of any other reason why it shouldnt detect that something is in the slot. If anyone can inform me what im doing wrong, or has any info on how to get it working, that would be great. Thanks for your time,
    ~Jared
    Powermac G4   Mac OS X (10.3.8)   2 gb ram, 200 gb hd, dual display

    Yes, i run Digidesigns audio editing program called Protools on my Mac. It uses a PCI card to import mic/line audio signals into the program from the hardware interface. I tried moving the Digidesign card and putting the wireless card in the same slot, and still nothing, although the Digidesign card works fine in the other slots. Each time i moved the Digidesign card, it showed up in the different slots, although the ones that were open did not show up at all. Only the PCI slots that are in use show up in ASP on my machine. I have the FW-800 version of the G4, so im not sure if that makes any difference. I have never erased the PRAM before, would you be able to give me directions on how to do that? Thanks a ton for your help. =)
    Powermac G4   Mac OS X (10.3.8)  

  • Third party wireless adapter?

    I have an older iMac, with OS version 10.1.x; Is there any third party wireless adapter that would support this OS? I am trying to enable my old iMac to connect to our wireless router at my home. Does anyone have a solution as to what I can do?

    Check this out: http://www.macosxhints.com/article.php?story=20050826105609733

  • UTF8 DB using third party package

    I have an Oracle DB defined with the UTF8 characterset. I can use Oracle Forms to insert and retrieve multibyte characters from the DB however, I have not been able to retrieve multibyte characters using third party packages. These packages can retrieve multibyte characters from other DB's. Does anyone have any suggestions or other information about retrieving multibyte characters from Oracle DB's.
    Thanks
    Scott

    Hi,
    Unfortunately there was a regression bug around using the Generic JDBC connector to a Foreign Database in this Technology Preview (3). I'm not able to give you good news as I don't have a workaround for you either.
    You could use SQLDeveloper to connect to the database for live work, unfortunately that will not help if you wanted to create offline objects of some sort using JDeveloper.
    regards
    Susan
    http://www.susanduncan.blogspot.com

  • Iphone 5 not charging after using third party charger.

    I know there's a lot of threads that discuss this topic but I haven't found someone who has the exact situation as mine.
    I broke my original charging cable and replace it with a third party thunderbolt cable. It charges once by fluctuating all the time. Now my battery is 0% and the third party thunderbolt cable doesn't work. I decided to replace it with an original thunderbolt cable but it still doesn't charge. It doesn't show anything even the battery symbol. Just blank off screen. I also let it plugged as I hope that it just needs to charge the battery because it's drained but I guess that's not the case. I'm charging via the wall charger.  I also tried to connect it in the usb port of my computer and it still doesn't work. Any fixes that you guys can recommend? I am on a panic right now. . Technically this cable should work as this is the cable from apple. Thanks.

    Yes I'm well aware of patents but I have used third party chargers fine with all my previous iphones. I can buy replacement third party chargers to all my other electronics, why is it that apple has to tie me into using their charging cable, it is anti-competitive and possibly an illegal practice.
    If you aren't going to offer helpful advice, then please don't state the obvious!! I wasn't aware that cables were under warranty, so being in a position that I couldn't afford another apple charger I have used another charger which has by the looks of things broken my phone. So again can I do anything to try and fix it? Does anyone know whether I have a case against the manufacturer of the 3rd party cable? Is apple being anti competitive? Id appreciate helpful comments please.

  • Video streaming using bluetooth

    First I'll establish a HP as a server and the other HP as a client for video streaming using bluetooth. Can anyone please tell me if video streaming using bluetooth is possible for Nokia N7610. I have tried my program in emulator WTK2.2, it's working like what I want..but there's a problem when I'm trying in N7610,N3230,N6233..it said that "there's no services" when client program try to find services from server program
    ServiceRecord[] listService=null;
    listService=new ServiceRecord[records.size()];
    for(int i=0;i<records.size();i++)
    {listService[i]=(ServiceRecord)records.elementAt(i);}
    for(int i=0;i<listService.length;i++)
    {while(!isClosed)
    {StreamConnection connection=null;
                   String url=null;
                   try
                     {url=listService[i].getConnectionURL(ServiceRecord.NOAUTHENTICATE_NOENCRYPT,false);
    connection=(StreamConnection)Connector.open(url);
    catch(IOException e)
    {System.err.println("Note: can't connect to:"+url);}
    byte[] movieData=null;
    try
    {InputStream inputStream=connection.openInputStream();
                      int length=inputStream.read()<<8;
                      length|=inputStream.read();
                      if(length<=0)
                        {throw new IOException("Tidak dapat membaca ukuran movie");}
    movieData=new byte[length];
    length=0;
    while(length!=movieData.length)
    {int n=inputStream.read(movieData,length,movieData.length-length);
                            if(n==-1)
                              {throw new IOException("Tidak dapat membaca data movie");}
    length+=n;
    inputStream.close();
    catch(IOException e)
    {System.err.println("Can't read from server for:"+url);}
    finally
    {try
    {connection.close();}
    catch(IOException e)
    try
    {layar=Image.createImage(movieData,0,movieData.length);}
    catch(Exception e)
    {System.err.println("Error: wrong image data from:"+url);
                      continue;
    client.showImage(layar,"Movie");
    I don't know if my problem is in client program or in server program.
    :confused:
    I will appreciate a brief reply how to fix this problem.
    Thanks
    * Timothy *

    This is possible
    because you will get streams for both data in and out...
    but the problem is that the j2me player is not always streaming supported.
    Since your server is mobile for streaming you have to implement a streaming server on ur server mobile.
    but you can play the whole video chunk by chunk... in many fashion...

  • How to do XMLDSig using third-party JCA providers?

    Hi all,
    Can anyone please let me know how to do XMLDSig using third-party JCA providers? The Sun XMLDsig documentation says that "A JSR 105 implementation SHOULD use underlying JCA engine classes, such as java.security.Signature and java.security.MessageDigest to perform cryptographic operations", but it doesn't say how to define the JCA provider programmatically. I don't want to change the Providers order in the security.properties file.
    Do we need to make any changes in the JCA provider classes to work with XMLDSig and XML encrypt?
    I'd appreciate your help.
    Joe

      How to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.

  • Convert word document in PDF,e pub,by using third party dll in Sharepoint designer workflow 2013?

    Hi,
    I want to convert word document to PDF,  EPub, by using third party (.dll).
    In SharePoint designer workflow in 2013.
    So that I have question, Can we Install third party (.dll) in SharePoint workflow Designer for conversion?
    Means I have created one simple application conversion of word to e Pub, PDF, Image by using (Spire.doc dll) in Visual Studio.
    So this same conversion I want to work in SharePoint designer workflows?
    So anybody has any solution then please provide me.
    Thanks,
    Samadhan

    it might be worth looking at these CodePlex steps, that plug directly into the Word Automation Services.
    http://sp2010wordautomation.codeplex.com/
    It'll provide you with a configurable step like the below that should help you achieve your aims
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • How to use Third Party DLL in Adobe Illustrator Plug In

    Hi Everyone,
    I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
    Please let me know how to refer C# DLL in illustrator plug in.
    Thanks in advance.

    There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.

Maybe you are looking for