Video streams in some apps stop after some seconds (S6000)
Hi,
In the apps DEL and Laola1.tv, video streams start with the first ~5 seconds, then stop, then repeat once and then stop.
Problem does not occur with android phone or laptop in the same wlan. Other streaming like youtube works fine.
Any hints or ideas greatly appreciated.
Lenovo IdeaTab S6000, Android 4.2.2
Thanks,
Sven
I already have radeon.modeset=0 on the end of my kernel line, I think I disabled KMS a month or two ago when it was (very briefly) enabled by default. IIRC my system was very broken with KMS enabled back then, I haven't tried turning it back on.
I've found xf86-video-ati-6.12.4-3 to work, and xf86-video-ati-6.12.192-1 not to work, irrespective of ati-dri version. I've just noticed 6.13 seems to be out, so I may try building that with ABS, and see if it fixes it.
EDIT: or maybe I won't, as that needs xorg 1.8 and I don't have enough time to build that and all it's deps just now
For now I've just set pacman to ignore the package, which works as a temporary solution. Are there any diagnostics I can do to help pin down the problem?
Last edited by Jack B (2010-04-20 22:05:07)
Similar Messages
-
I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it??
Try loading the same video in different browsers (Firefox, Chrome, Safari and Internet Explorer are your best options). If the issue is across all of them, make sure you've downloaded the latest version of Flash at http://get.adobe.com/flashplayer/
If it's still stopping after that...Do the tried and tested method for everything: reset your router. -
Youtube app stops after 10 seconds
iPad gen 1 16gb, updated to 5.1.1
I cannot seem to find out what version of the Youtube App I have.
The last week or so I've started to have problems with youtube. The video I wish to play starts but after exactly 10-11 seconds it freezes as it would if it was buffering. Instead of the video buffering however it just stops, the "Play" button down in the right corner is replaced by the "Replay" button. This seems to occur every 2-3 videos or so.
This is not a network problem and youtube is updated to latest downloadable release for 5.1.1 which it has been for a while. I have both deleted and reinstalled the app and also turned my device on and off.
Thank you for any help in advance!
ZahloHello Zahlo,
Welcome to the Apple Support Communities!
I understand that the YouTube application on your iPad is not working as your would expect. I also understand that you have completed some great troubleshooting by restarting your iPad and deleting and reinstalling the YouTube application. Because the issue continues, I would suggest reading over the attached article for any troubleshooting steps you may have missed. It may even be necessary to follow the last step in the article and contact the developer of the application.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Have a great day,
Joe -
in trying to use ipod and youtube apps on my iphone 4 on IOS 4.3.3 and after a few seconds they stop playing, can't play the songs or videos or wunder radio over 5 seconds, last time i reseted to factory, then i realized there's something wrong with the config, i wanna know what is it .
Hi i have exactly the same prob as yours. Seems like this is rather recent. Just asking, did you jailbreak ur phone?
-
I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.anybody answer me fast
-
Video and audio STILL Stopping after 2 seconds
I am running Premiere Pro CS3 for Mac. For some reason, regardless of whether I capture direct fromDV cam or import a video or audio file. Occasionally (3 out of 5 times) the video and audio stops after 2 seconds. I hit space bar and it does it again. Ay ideas why?
I am running this on a brand new Mac Pro too.
Thanks,Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
ISA 550W : Youtube streaming stops after few seconds
Since I have installed the ISA 550W, the Youtube videos stops after few seconds. It happens on all my devices : Windows 8, Samsung Smart TV, Android, Windows Phone...
I have the lates firmware.
This problem does not occur with other streaming site like DailyMotion.
I diabled HTTP on antivirus but it has not changed anything. The web browsing is faster.
Application control is not enabled.
Any idea ? Thanks in advance.Hi,
i have do more test on this problem today and after disable all services and enable one by one i arrive on result is the Anti Virus block or disturbe the good process on download file for you tube or for another system.
My configuration is :
Product : ISA 550W
Firmware : 1.2.17
ISP : free with maximum 1Mo download with test linux image file from here :
http://www.ubuntu-fr.org/telechargement?action=dl
I hope this can be help cisco to find quickly solution because this solution can be temporary.
I no buy option "security services" to have this service disable.
thanks
The 09/10/2013 : you can enable anti-virus and disable HTTP scan and youtube work and download work fine. -
When I attempt to preview a song on iTunes, it begins to play but stops after 5 seconds
When I attempt to preview a song on iTunes, its begins to play but stops after 5 seconds instead of the normal 30 seconds.
I posted this to another thread here:
"I am having the same issue with the preview songs cutting off around the 5 to 7 second mark. It started about 3 weeks ago right after I downloaded an album.
It downloaded but at the end said the download failed due to a network timeout error. I clicked out of the error dialogue box and checked my "Purchased" items folder and it did seem there was a problem, no songs were there only a placeholder of the album cover (or something of that nature). Nothing happened when I clicked on it. However, when I closed and then restarted itunes the entire album was there and there have been no problems with those songs.
Some here are saying they believe they previews cutting off have something to do with the 10.6 upgrade, however I still have 10.5.1.42 and have the problem.
I am running up-to-date Windows 7 Professional with Viper Anti-virus. I don't for a moment think it has anything to do with windows updates, anti-virus or any other 'windows' issues. I believe it is within itunes in its' preview player software.
Dear iTunes, if this thread is being monitored by a rep, please be aware that if I cannot preview more than 5-7 seconds of a song you can rest assured I will not be purchasing any further music through itunes until this issue is resolved and will be taking my business elsewhere in the interim."
I use the ipconfig/flushdns all the time to resolve browser issues, especially when using Twitter. It does not help this particular problem for me. -
The CPU fan starts with the case switch on and the system stops after 2 seconds
Hi,
I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
The CPU fan starts when I switch on the power with the switch on the back of the case, but stops after two seconds. I don't get anything when I push the Start button of the case.
At the beginning I got some feeble orange light on the D-bracket LEDs. Now, there is nothing at all.
I have tried to do a CMOS and also to put the Mobo out of the case after having disconnected the HD, the DVD reader, the floppy disk reader and all the Front panel connectors ===> nothing changed.
The Power capacity of my case is 300 watts. I had computed on Power Supply Wattage Calculator (http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php?cmd=AMD) that it is quite sufficient for my system.
Other materials on my system: the MSI FX5200-T and a PQI RAM PC 3200 which worked well on a former MSI Mobo (K7N2 Delta). I don't intend to keep this RAM on my new system but I use it to test it, before installing the Corsair Value which are on the system with which I write this post.
Thank you in advance for your help.Finally, it appears that I had damaged the motherboard and the CPU.
When I installed the CPU, I hesitated because the User's guide said that "the gold arrow should point towards the lever pivot", whereas the illustration and the AMD's one pointed towards the opposite corner. I had finally made the good choice (that of the illustrations), but I have certainly displaced some pins of the processor while hesitating.
The shopper told me that MSI will never agree that its text had troubled me and refused to give me a new motherboard.
I have finally bought an ASUS motherboard and, as I was fed up with the computer building, I paid a technician to do this job.
I would like to mention two other mistakes in the MSI K8N Neo User's guide:
- it devoted one page to the installation of the retention mechanism which was already installed.
- there was no explanation about the mention of two "Power LED" connectors.
I acknowledge that I have been stupid, since I should have asked the question of the direction of the golden arrow in a forum, where I would have found very quckly the right answer to my hesitation.
However, I am revolted that MSI does not acknowledge that a grave mistake and two troubling omissions in the User's Guide can lead novice people to grave failures.
I'll never more have confidence in a company that make such mistakes and does not assume its responsibility.
Once again, thank you for your help. -
I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
Dispatcher stop after few second
Dear friend, I have restore database using BRRESTORE. My dispatcher is stopped after few second. Developer trace is as below.:
Pls. give me solution as soon as possible.. Thanks. in advance.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jun 13 08:38:11 2011
kernel runs with dp version 136(ext=102) (@(#) DPLIB-INT-VERSION-136)
length of sys_adm_ext is 312 bytes
sysno 00
sid PRD
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 218
intno 20020600
make: multithreaded, ASCII
pid 6128
***LOG Q00=> DpSapEnvInit, DPStart (00 6128) [dpxxdisp.c 1104]
shared lib "dw_xml.dll" version 218 successfully loaded
shared lib "dw_xtc.dll" version 218 successfully loaded
shared lib "dw_stl.dll" version 218 successfully loaded
shared lib "dw_gui.dll" version 218 successfully loaded
shared lib "dw_mdm.dll" version 218 successfully loaded
Mon Jun 13 08:38:23 2011
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0234.qqq.nxst) took 12 seconds
Mon Jun 13 08:38:40 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3881]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >abcbl_PRD_00 <
DpShMCreate: sizeof(wp_adm) 16640 (832)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 051B0040, size: 2675472)
DpShMCreate: allocated sys_adm at 051B0040
DpShMCreate: allocated wp_adm at 051B17D8
DpShMCreate: allocated tm_adm_list at 051B58D8
DpShMCreate: allocated tm_adm at 051B5900
DpShMCreate: allocated wp_ca_adm at 053FA940
DpShMCreate: allocated appc_ca_adm at 053FEF90
DpShMCreate: allocated comm_adm_list at 05400700
DpShMCreate: allocated comm_adm at 05400718
DpShMCreate: allocated vmc_adm_list at 0542F518
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0542F540
DpShMCreate: allocated wall_adm at 0542F548
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2457 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( abcbl) [dpxxdisp.c 10127]
DpStartStopMsg: send start message (myname is >abcbl_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 218
Release check o.K.
Mon Jun 13 08:39:20 2011
ERROR => W0 (pid 6032) died [dpxxdisp.c 12698]
ERROR => W1 (pid 6132) died [dpxxdisp.c 12698]
ERROR => W2 (pid 564) died [dpxxdisp.c 12698]
ERROR => W3 (pid 196) died [dpxxdisp.c 12698]
ERROR => W4 (pid 4512) died [dpxxdisp.c 12698]
ERROR => W5 (pid 4600) died [dpxxdisp.c 12698]
ERROR => W6 (pid 6064) died [dpxxdisp.c 12698]
ERROR => W7 (pid 4552) died [dpxxdisp.c 12698]
ERROR => W8 (pid 4520) died [dpxxdisp.c 12698]
ERROR => W9 (pid 6060) died [dpxxdisp.c 12698]
ERROR => W10 (pid 4528) died [dpxxdisp.c 12698]
ERROR => W11 (pid 4376) died [dpxxdisp.c 12698]
ERROR => W12 (pid 4560) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W13 (pid 4484) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W14 (pid 4488) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W15 (pid 1700) died [dpxxdisp.c 12698]
ERROR => W16 (pid 4380) died [dpxxdisp.c 12698]
ERROR => W17 (pid 4464) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W18 (pid 5932) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W19 (pid 4620) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-6032 (SIGUSR2)
ERROR => DpWpKill(6032, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-6132 (SIGUSR2)
ERROR => DpWpKill(6132, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-564 (SIGUSR2)
ERROR => DpWpKill(564, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-196 (SIGUSR2)
ERROR => DpWpKill(196, SIGUSR2) failed [dpxxtool.c 2508]
killing W4-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2508]
killing W5-4600 (SIGUSR2)
ERROR => DpWpKill(4600, SIGUSR2) failed [dpxxtool.c 2508]
killing W6-6064 (SIGUSR2)
ERROR => DpWpKill(6064, SIGUSR2) failed [dpxxtool.c 2508]
killing W7-4552 (SIGUSR2)
ERROR => DpWpKill(4552, SIGUSR2) failed [dpxxtool.c 2508]
killing W8-4520 (SIGUSR2)
ERROR => DpWpKill(4520, SIGUSR2) failed [dpxxtool.c 2508]
killing W9-6060 (SIGUSR2)
ERROR => DpWpKill(6060, SIGUSR2) failed [dpxxtool.c 2508]
killing W10-4528 (SIGUSR2)
ERROR => DpWpKill(4528, SIGUSR2) failed [dpxxtool.c 2508]
killing W11-4376 (SIGUSR2)
ERROR => DpWpKill(4376, SIGUSR2) failed [dpxxtool.c 2508]
killing W12-4560 (SIGUSR2)
ERROR => DpWpKill(4560, SIGUSR2) failed [dpxxtool.c 2508]
killing W13-4484 (SIGUSR2)
ERROR => DpWpKill(4484, SIGUSR2) failed [dpxxtool.c 2508]
killing W14-4488 (SIGUSR2)
ERROR => DpWpKill(4488, SIGUSR2) failed [dpxxtool.c 2508]
killing W15-1700 (SIGUSR2)
ERROR => DpWpKill(1700, SIGUSR2) failed [dpxxtool.c 2508]
killing W16-4380 (SIGUSR2)
ERROR => DpWpKill(4380, SIGUSR2) failed [dpxxtool.c 2508]
killing W17-4464 (SIGUSR2)
ERROR => DpWpKill(4464, SIGUSR2) failed [dpxxtool.c 2508]
killing W18-5932 (SIGUSR2)
ERROR => DpWpKill(5932, SIGUSR2) failed [dpxxtool.c 2508]
killing W19-4620 (SIGUSR2)
ERROR => DpWpKill(4620, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 13 08:39:30 2011
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jun 13 12:39:30 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6032 Ended no 1 0 0
1 DIA 6132 Ended no 1 0 0
2 DIA 564 Ended no 1 0 0
3 DIA 196 Ended no 1 0 0
4 DIA 4512 Ended no 1 0 0
5 DIA 4600 Ended no 1 0 0
6 DIA 6064 Ended no 1 0 0
7 DIA 4552 Ended no 1 0 0
8 DIA 4520 Ended no 1 0 0
9 DIA 6060 Ended no 1 0 0
10 DIA 4528 Ended no 1 0 0
11 DIA 4376 Ended no 1 0 0
12 DIA 4560 Ended no 1 0 0
13 UPD 4484 Ended no 1 0 0
14 ENQ 4488 Ended no 1 0 0
15 BTC 1700 Ended no 1 0 0
16 BTC 4380 Ended no 1 0 0
17 BTC 4464 Ended no 1 0 0
18 SPO 5932 Ended no 1 0 0
19 UP2 4620 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 13 12:39:30 2011
===========================THanks for reply pls find dev_wo file.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Jun 13 11:05:11 2011
B create_con (con_name=R/3)
B Loading DB library 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
B Library 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.199)
B New connection 0 created
M sysno 00
M sid PRD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 218
M intno 20020600
M make: multithreaded, ASCII
M pid 3776
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3776) [dpxxdisp.c 1164]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 16640 (832)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 051B0040, size: 2675472)
M DpShMCreate: allocated sys_adm at 051B0040
M DpShMCreate: allocated wp_adm at 051B17D8
M DpShMCreate: allocated tm_adm_list at 051B58D8
M DpShMCreate: allocated tm_adm at 051B5900
M DpShMCreate: allocated wp_ca_adm at 053FA940
M DpShMCreate: allocated appc_ca_adm at 053FEF90
M DpShMCreate: allocated comm_adm_list at 05400700
M DpShMCreate: allocated comm_adm at 05400718
M DpShMCreate: allocated vmc_adm_list at 0542F518
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0542F540
M DpShMCreate: allocated wall_adm at 0542F548
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Jun 13 11:05:12 2011
M calling db_connect ...
C Prepending E:\oracle\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPRD's password
C Connecting as /@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 0463A5C8 0463F654 0463F0F8
C Attaching to DB Server PRD (con_hdl=0,svchp=0463F04C,srvhp=0463FC24)
C Starting user session (con_hdl=0,svchp=0463F04C,srvhp=0463FC24,usrhp=04648404)
C Now '/@PRD' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-980 when accessing table SAPUSER
[dbsloci.c 11772]
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0463F04C,usrhp=04648404)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPPRD/<pwd>@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 0463A5C8 0463F654 0463F0F8
C Starting user session (con_hdl=0,svchp=0463F04C,srvhp=0463FC24,usrhp=04648404)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11404]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1282]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9696]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server abcbl_PRD_00 on host abcbl (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Jun 13 11:05:12 2011
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9881
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3776) [dpnttool.c 357] -
Why are previews stopping after 3 seconds
why are previews stopping after 3 seconds. problem just started after years of no problems.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
ipconfig /flushdns
Hit "ENTER" key
Restart your computer.
Now try your preview music again. -
MBPro 1.1 Fans begin and stop after 2 seconds at 160. No fans lower than 160.
I've been doing a lot of research on the MBP fan issues. A lot seem to be snubbed out. Although; I haven't quite found what my problem is anywhere. When I boot up my fans kick on high rpms and then quit after about 5 seconds. After that I have a 0rpm reading from iStat and SMCfan control. Not until my laptop begins to get hot and the temperature reads around 160 do the fans start working with a 5000rpm reading, but they stop after 2 seconds. It's similar to the mooing problem of the past, but I have zero fan activity before 160.
Any help would be great.Also when I remove the battery the fans run continuously at a high rpm. Also iStat and SMC fan control do not recognize the rpms
-
I bought the songs breakeven and nothing by the script. They both stop after 41 seconds but they're supposed to last for four minutes.
As you give the price in £'s I assume that you are here in the UK, in which case try deleting the incomplete tracks from your iTunes library and redownload them (re-downloading isn't possible in all countries but is in the UK) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link. -
Audio CD stops after few seconds
Hello,
I use ITunes 9 under windows 7.
I can't read (and convert to MP3) an audio CD using ITunes.
The song starts ans stops after 2 seconds.
Same effect in windows Media player but it works OK in Winamp.
The diagnostic says everything's ok
"** Tests du lecteur CD/DVD **
Aucun pilote dans LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: PIONEER DVD-RW DVR-K04RA, Rev 1.00
CD audio dans le lecteur.
9 morceaux trouvés sur le CD, durée de lecture 41:36 sur CD audio.
Piste 1, début 00:02:32
Piste 2, début 01:01:12
Piste 3, début 06:56:07
Piste 4, début 11:46:10
Piste 5, début 16:55:37
Piste 6, début 20:49:25
Piste 7, début 25:58:45
Piste 8, début 32:43:47
Piste 9, début 37:17:15
La lecture du CD Audio a réussi (vérifiez la présence de microprogramme ancien).
Vitesse du lecteur obtenue.
Les vitesses CDR du lecteur sont : 4 10 16 20 24.
Les vitesses CDRW du lecteur sont : 4.
Les vitesses DVDR du lecteur sont : 4.
Les vitesses DVDRW du lecteur sont : 4."
Many thanks to help meYes, they are all commercial CD's.
I tested with 10 commercial CD's.
The song starts and stops after 1 or 2 seconds and ITunes switchs to the next track ...
Same effect with Media Player.
Media player says there is an error (red cross !) but there is no error message ....
All works fine with winamp .....
Maybe you are looking for
-
Getting Error while Execute SSIS Package from Console Application
Dear All, SSIS package working fine directly. I got following error while execute SSIS package from C# console application. The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the
-
Upload Center 2010 error when saving Powerpoint 2010 file to SharePoint 2013
I'm experiencing an issue when attempting to save a Powerpoint 2010 file to our SharePoint 2013 farm. If a user opens the file in Edit mode, when saving the file Upload Center 2010 complains the upload failed, and PowerPoint 2010 displays a message
-
Submitting Report output to spool
Hi All, We have problem while submitting reort output to spool.Have tried using FM'Get_print_parameters and submitting the report using stmt SUBMIT REP TO SAP-SPOOL AND RETURN.We have to submit report output to spool But its going to infinite
-
Illustrator lags on 40MB file (MacBook Pro, Retina, 16GB)
File is large/ complicated only because some leaves were transformed to halftone dots, and of those I will eventually have 100 pieces. Right now, I am at 40MB file size, app. Shocked at the lagging when moving or copying elements - my old PC wasn't a
-
iPad2 is dead...worked fine, then when I tried to use it an hour later, the screen was black. Home button did nothing; on/off button did nothing. Tried charging overnight...still does nothing at all. Also tried syncing with my desktop; still nothi