Video Stutter during editing

I am using elements 8 with a windows 7 64 machine. I just installed a new video card an XFX radeon hd6870. When I am editing my vidoe I get a real bad stutter. I then posted the vide on utube abd still had the stutter on my maching but not when I viewd it on my ipad.
Led me to believe it was the vide card so I replaced it with the new XFX. Still same issue. Any suggestions?

Can you give us the full specs. of your Source Footage, your Project's Preseto and also your computer, please?
It is very likely that the cause will be in those details.
Thanks, and good luck,
Hunt

Similar Messages

  • IMovie will not show the video playing during editing

    Does anyone know the maximum size of the total clips, still photos and transitions for iMovie? I suspect that may be why when I am trying to edit the iMovie project I hit the space bar to play and only the sound plays. The video does not move.

    Hi
    A. How much free space is there on Your - Start-Up (Macintosh HD) Hard disk ?
    The movie in Your Camera / Stored on Your Mac (from Camera) - is very Compressed.
    For iMovie (or FinalCut) it has to be in an Editable format - and this is massively LARGER
    I've movies on 500Mb when un-folder are 50Gb or even more.
    B. Is there other external Hard Disks connected ?
    How are it / they formatted - HAS TO BE - Mac OS Extended (hfs) to work for VIDEO
    UNIX / DOS / FAT32 / Mac OS Exchange - Works for most other things but not for VIDEO
    Yours Bengt W

  • Why does my video skip on playback/preview during editing?

    I thought I knew how to edit video...... I had a family reunion this summer and I'm trying to take all of that video (captured on my Samsung SC-HMX10C HD video camera) and edit for an eventual DVD output. I've got it all imported in Imovie, but when I add music (from I tunes),trim the video or add transitions then press playback it is all skippy. It plays for a few seconds correctly, then the video freezes (but I can sometimes still hear audio) and then suddenly reappears 5 or seconds down the clip.... then keeps happening. OVER & OVER & OVER....HELP! I have about 3 hours of video to do and it has taken about an hour for about 1 minute of clip because it keeps freezing up. Sorry if this has been asked before, but I've been reading these discussions all day and didn't find this exact question. By the way the video clips are MP4's. Thank you!

    You would get better results if you convert the MP4 ciips into Apple Intermediate Codec before editing. After editing you can render them back into MP4 if you want.
    MPEG Streamclip (free) will do this conversion. Or get iMovie 09 and it will do it.

  • Video Stutter

    I have a video which consist of various panning shots. During editing and after exporting, I can play back on my 6 core 2.66 GHz 12GB 1333MHz DDR3 Mac with no problems. However, when I take the same export and trying to play back on a laptop or try to stream, the panning shots stutter - especially playing back with full screen.
    It is apparent that there is a issue with the redrawing, because everything on the screen is moving. I cannot seem to remedy the issue without seriously affecting the picture quality. I have tried exporting using many differently settings but no dice. Also tried the Warp Stabilizer.
    If anyone has any suggestions, I would be grateful!

    The laptop is a Lenovo X1 Carbon with an Intel Core 1.8GHz processor, 8GB of memory, and an Intel Graphics 4000.  The video format is h.264, 1280x720 resolution, 29.97 frame rate, NTSC.  I also tried using maximum render quality and frame blending, but no luck with that, either. 
    Issue seems to be at worst during streaming from our Kaltura media server.
    Thanks!

  • TS1718 Fix for iTunes 10.6 music video stutter with PC running Windows 7-64bit ?

    I have tried updating all drivers and still all my music videos stutter at various times during playback.  I've reinstalled iTunes umteen times to no avail at fixing this  problem.  Does ANYONE have a fix for this problem?  Any help would be greatly appreciated!!!!!!

    Repair your QuickTime.
    Control Panel > Programs n Features > highlight QuickTime, click CHANGE then REPAIR.

  • Freezing, Application Ending while using PSE 12 during editing.

    Good afternoon, I'm using PSE 12 and the application keeps on freezing and ending during editing.   Just purchased a new MAC laptop that is running Yosemite 10.10.  Any advice?  Thank you in advance. 

    CSanchez98
    If your program is Photoshop Elements 12, you have posted in the wrong forum. Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing).
    Please repost your thread in the Adobe Photoshop Elements Forum
    https://forums.adobe.com/community/photoshop_elements
    or wait for a moderator here to see your thread here and move it from here to there.
    Much has been written about Photoshop Elements 12 on Mac Yosemite 10.10 and the good people in the Adobe Photoshop Elements Forum should be
    able to advise you with the best information possible on this matter.
    ATR

  • Adobe Premier cc7.2  hang during editing

    Windows 7 Premier cc 7.2 and BMD Intensity Shuttle  card  4 GB RAM during editing Premier hang  what problem pl. help.

    Hi Bill
    Open the program and click Edit >>Preferences >>Scratch Disks
    This should show the amount of spare memory for performing tasks.
    If low you could add more disk space e.g. an external hard drive rather than main memory.
    In general the software pre-dates Windows 7 but if it will run on Vista it should perform satisfactorily on W7.
    If you need any more advice I would recommend going directly to the video forum.
    http://forums.adobe.com/community/premiere_elements

  • 720P 30 H.264 videos stutter when played back on Windows

    720P 30 H.264 videos stutter when played back on Windows
    I have an interesting problem that I am hoping someone can help me with.
    I have several short videos (2-4 minutes) in 1080i HDV that I have edited in FCP. When output to 720P 30 H.264 in Compressor at either 10 or 6 MB they look just drop dead gorgeous when played back on either of my dual processor Macs.
    However when played back on a Windows machine with QuickTime 7, they stutter to the point that playback locks up. This happens on 1.5 GHz to 3.2 GHz P4 class machines with 512 MB to 1 GB of RAM and 64 to 128 MB video cards. On the 3.2 GHz P4, the processor utilization peaks at 100%. The interesting thing is that all of these same Windows machines have no problem playing back 720p 24 trailers at 6 MB.
    Thanks all.

    First a correction. I am using the latest version of FCP – 5.
    Regarding the encoding, I have tried going from native HDV MPEG-2 to H.264 at 720P from 10 to 4 MB at 24, 30 and 29.97. The Mac seems to play everything back very well, but most PCs (the latest IBM T 40 – 43 series laptops) a couple of Dell desk tops (2.6 GHZ with 64 and 128 MB graphic cards) and a 3.2 GHz Shuttle PC with a 128 MB graphic card (that we routinely use to decode four MPEG-4, 4CIF images simultaneously and display on a 42” ED Plasma) choke/stutter to varying degrees with processor utilization hitting 100%.
    So, the real issue here is what is the difference between a 720p trailer that I can download from Apple and what I can output using Compressor 2 at a similar data rate – other than the frame rate?
    And why does the Compressor output stutter on most PCs?

  • Mplayer2 pause+unpause makes video stutter when VDPAU is on

    Hi there,
    since the beginning of the week, mplayer2 is behaving strangely: pausing for some seconds (3-4) then unpausing will make the video stutter horribly (while audio is still fine).
    Same with any mplayer2 or mpv version. mplayer1 is fine.
    I could figure something out: mplayer1 defaults to GL video output, whereas mplayer2 / mpv will default to VDPAU. Switching to any other VO driver than VDPAU works fin indeed. However using vdpau with mplayer1 works fine. But perhaps mplayer1 tells it is using vdpau but cannot, so it falls back to using gl without telling.
    I'm using radeon, and mesa got updated a few days ago to version 9.1.4. I've been experimenting this issue since then. I do not know if mplayer2 was using vdpau automatically before. If I have some time I'll test with 9.1.3 to see what VO mplayer[12] use.
    As a temporary fix I've set 'vo=gl' to ~/.mplayer/config.
    Has anyone the same issue with another video driver? Have you tested with mesa 9.1.3?
    This could help deciding who is to blame here.

    I did test it with Mesa 9.1.3, and mplayer2 still defaults to vdpau. The unpause issue persists.
    Maybe I'm missing something here, but it seems like Mesa did not trigger the change. I'm wondering what update changed mplayer behaviour during the last 2 weeks.

  • Video stutter and artifacting -TM700k video imported using rewrap2m2v

    Guys,
    I imported a video shot in TM700 to my iMac late 2006 model running snow leopard, using the Automator tool of Alan Somersault -rewrap. While playing the resultant movie .m4v file I am getting a lot of video stutter and artifacting and the movie also quit couple of times while playing.
    Any suggestions on resolving this?
    Thanks

    The movist application actually drops frames during playback to avoid the stutter you've described.
    This of course is good for preview. The only other way (within consumer segment) is to get a computer which support hardware accelerated playback, i.e. a later Mac models. However, as hardware acceleration is early, stutter still occurs for some applications but that will improve over time.
    If you want to go the free route, use Rewrap2M4V to rewrap the video files to a more friendly format and then use MPEG Streamclip to actually convert the video to a less compressed format.
    If you want an "all-in-one" solution, try VoltaicHD for ClipWrap.
    HTH

  • I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
    You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
    The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

  • How to show Append Changes previous value in text box during edit

    Hi,
    I am using multi text column with append mode, all feature of append mode is working fine,but when any other field has been changed on that time append text box take blank value.
    when using same list with ssrs ,report shows the current data,but after approved by manager current item change in blank and current data come in history.
    is any way to do ,if any body change the any item same data appear during edit time in same column.
    Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
    |
    | Twitter

    Hi  Hasan,
    According to your description, my understanding is that the multi text column with append mode is not working fine in your SharePoint 2010.
    For reproducing your scenario, I created a new custom list , turned on its version  feature and added a multi text column with append mode. But it was working fine when I change the values of both the
     multi text column and other columns.
    For your issue, could you create a new list to verify the multi text column with append mode  works correctly.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Can't see the video's to edit

    Can't see the video's to edit
    when i move the mouse over the video's they should appear in the upper right screen, but i get black screen when i click on the play icon down left, i still get black screen, the only videos i can see should be moved to the editing area,
    why is that and is there a fix for it soon?
    i have screen shots of the problem, but i can't find anywhere here to post them

    am i the only one getting this?
    i can't work with imovie like that its not useable like that at all

  • HD clips have video stutter after import

    New problem with Sony HDR-SR5 import:
    2 of 10 clips from recent vacation have video stutter/jerkiness upon import. All other clips are fine. The two clips that stutter in iMovie 08 play fine on the videocamera. I have never seen this before. I have reimported the abnormal clips, but no change. The audio is okay; it is just the video Any ideas?
    Mark

    *How comforting* ( for me alas ) to find I'm not alone with this problem.
    Config: iMac-Intel - 2,16MHz, 1Go RAM, 320Go internal drive, 500Go USB external drive, OS-X 10,4,11 ( Tiger ) IMovie 7,1,1, SONY HDR-SR5E
    My first few imports worked fine, then Imovie started to quit and 2 other movie sequences were corrupted ( stuttering image ) no matter how long they lasted or which HDD I decided to store them to.
    Apparently other posters have signaled this to Apple, but that unfortunately does not help us getting on with our respective work.
    It would seem there are only 2 solutions while we wait -
    FCE = hand in wallet, or
    Just copy the files from the SONY directly to a HDD location and wait for the Imovie issue to be solved.
    Maybe unplug my Firewire Presonus Firebox ?????
    All futher comments and possible work-arounds welcome naturally.

  • FCP video stutter

    I am running FCP 6.0.6 on my MacBook Pro (2.53 GHz Intel Core i5, 4 GB 1067 MHz DDR3) and saving all my projects on an external hard drive. I've tried to search for this problem but haven't been able to locate a solution:
    I am getting video stutter on both my external monitor as well as my viewer window in FinalCut. The external monitor stutters when I play from the time line, but the canvas window looks fine. I tried trashing my preferences but the problem remains. What else can I try?
    I also can't update from Apple as I do not have my serial number.
    Thanks for any help.
    -Patrick

    You don't give any details about your video format or sequence settings etc. so you could be using something completely inappropriate.
    Have you trashed all the prefs completely? http://www.digitalrebellion.com/pref_man.htm
    Does the problem appear in your final output . . . . DVDs, the web etc.? If not it does not really matter.

Maybe you are looking for