Video switches back to Spatial Conform/Fit appearance after Fill

I have this issue where a clip in the timeline reverts back to Fit for no reason even though it is still set to FIll in the Spatial Conform option. I have tried then to switch it back to Fit/None an then Fill again but it does not change and the video displays with the unwanted vertical bars on each side.
This has happend twice now and the only option I have is to delete it from the timeline and reimport it back in, which is bit of a pain as it has speed settings and effects added. Also the problem occurs days after so is very random.
I was wondering if there is a solution to force it back to Fill rather than having to do the re import to the timeline.
Thanks in advance.
Neville
FCPX 10.0.6
OS X 10.8.2

Have you guys figured out a solution to this? or a good work around? This is my #1 problem in fcp. Im cutting 5k R3d's converted to fcp x proxies. naturally, I need the abillity to scale into my 5k image in a 1080 project. When I set spatial conform to "none" I'm able to then move around and scale into the storyline clip .
but If any connected clip is adjusted in any way like adding a simple dissolve the result to the storyline clip is
the only work around I have is to copy the file then right click the file select "reveal in event browser" go reload the clip in to the project and paste attributes. I have to do this after every edit. Its a God **** nightmare!! This makes FCP X unusable for me..

Similar Messages

Stop video, switch back to camera mode

My iPad mini will not allow me to return to camera mode from video mode

Just swipe up or down anywhere on the screen until the camera mode is highlighted in yellow text on the right side of the camer screen. The selected mode appears in yellow.
Swipe up and down - not left and right.

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.

Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
What can I do to get it to work again as more than an overpriced paperweight?

Hello,
Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution.

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly it and switch back and forth from video to still pics and while I may have filmed four videos sometimes Quicktime tells me that one of them can't be pl

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly the drone and switch back and forth from video to still pics and while I may have filmed four videos , sometimes Quicktime tells me that one of them can't be played . Checking the info shows that each of the unplayed videos was saved in the same mp4 format as the playable ones yet some of my most important videos won't play . It's getting very frustrating .

first; I use Perian, that helps even though it is no longer supported, (must have for avi files)
the apple-cores at apple have gotten very sloppy -- quicktime is a bit finicky and flakey.
example,   occasionally (when copy file from quad's card to hard drive) the avi will show up as a 'mov' file and qt plays it no problem and no conversion.
but that is very occasionally, most of the time qt won't convert the file,   -- iMovie won't open an avi without Perian installed , I don't know how that effects qt.
qt 7"pro" is no good either, (qt 10 does everything it does and for NOT the extra $35)
I have gone to VLC and MPlayerX for direct playback for drones and cameras.

When i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos.

when i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos. NOT A ROUTER PROBLEM. all my other apple devices dont have this problem

iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos or device not recognized as a camera

I'm using proxy media for a video I'm editing but now that i switch back to the original media some of my effects are missing can anyone help me.

I'm using proxy media for a video I'm editing but now that i switch back to the original media some of my effects are missing can anyone help me.

Shouldn't happen.Only thing I can think of suggesting is to delete render files and try again. Trashing preferences is a long shot, but no harm in trying. Use the Digital Rebellion Preference Manager, a free download.
Assume you have a reason for using such an outdated version of FCP X. That may be contributing to your problem.
Russ

Spatial conform and blend mode; what does it mean and wherefore?

I can't find a explination in the help...: spatial conform and blend mode; what does it mean and when do you use it because there is e a big numbre of choises.
Ican't find a explination in the help...
Thanks!

Spatial conform is where you decide whether you want the (oversize) image to fit the video display size, or to be full-size (allowing room for animation).
Blend modes - far too many to describe here even if I knew them all, but Overlay is a nice one to start with. They specify how you want a layer to blend with the one below it. Try them and see what they do.
Andy

When I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

when I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle or changes in the moving waveform graph with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi, I'm having a problem with my first gen. iPad switching back to the apps page by itself. This started after upgrading to ios5. It will do this from safari or kindle. I have turned it off manually as suggested by a tech rep. without any improvement.

Hi,
My 1stgen iPad keeps. Switching back to the apps. Pages by itself after installing ios5. I have shut it down manually as suggestedby a tech rep but the problem still exists.
Thanks, Jim

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Switching back to safari 3 from safari 4 beta ....

swiching back to safari 3 from safari 4 beta
first of all , i'm switching to Mac when snow leopard being released , GOD willing ...
but i'm a web developer + designer , and i wan't the users visiting my site see it as i designed and developed on the Mac , thats my point , to get ride of the **** of IE ..... because these features really made many people love to use Safari on windows .... so i wonder why apple removing them from 4 !!!!!!!! now the point :
--- switching back to safari 3 from safari 4 beta and i got the coole feel again :
- safari native aqua form widgets .... ( maybe apple will get ride of Aqua and make a new set of widgets , but won't appear untill snow leopard released ) .......
- safari's native drop-down window animations, alerts ... ( like the one i am using now ) ...
- the pretty native round search box .... which feels to me how search box should be
- get the pretty lucida GR font to be used in safari again as the base font.... it was removed from safari 4 beta !!!!!!!!!
- got the pretty progress indicator again in
in the address bar.
- got the blue highlight for the address bar and the ( rounded ) search box in the toolbare ....

Kappy wrote:
Language barrier, it would seem?
thank you guys (= Kappy , Hawaiian_Starman ) for welcoming me with my first post !!!!!!!!!
..... and i was writing fast after installing safari 3 without paying good attention while typing as if i was chatting .... i excuse , next time i'll do.
Message was edited by: ahmad seleem
Message was edited by: ahmad seleem

Switching back to Domain-0 console

I have been playing around with the xm console <domain> command to see if I can get an X11 or Windows desktop on my computer screen without going through vnc. I want to run a vm server on my laptop and be able to switch back and forth between Windows and Linux. ( I realize that this isn't the intent of the product but I thought it would be fun to try ).
The two issues that I am having are
1) it appears that the consoles are mapped to vnc. Is there a way to map these to something else so that I could get the Windows console or X11 desktop through the xm console command?
2) once I connect to the xm console to a Linux machine, how do I disconnect from this console connection and go back to Domain-0? Do I need to install the xm package on this Linux instance to make this happen or is there a magic keystroke that can be interpreted as something for Domain-0 to switch the console back. The only way that I can see how to do this is reboot the guest vm which then releases the xm console.

Q1:Is there a way to map these to something else so that I could get the Windows console or X11 desktop through the xm console command?
A1:here are steps to get windwos/X11 desktop for guest OS.
1)start your VM guest.
2)ssh -X your_oracle_vm_server
3)vncviewer :5900
5900 is the first vnc server port default. you may try "vncviewer :5901" if you start other VM guest.
Q2:once I connect to the xm console to a Linux machine, how do I disconnect from this console connection and go back to Domain-0?
A2:Typing Control-] in the xm console will detach your screen from the guest console and go back to Domain-0.

HT3053 I have a 13inch MacBook Pro and when I switch it on the apple logo appears then a slot and the circular symbol which is turning and then before opening the home screen it switches off again. Is there a sequence that I can use to force it to load.

I have got a 13 inch MacBook Pro and it got stuck in a loop so I switched it off by holding the power button down and now when I switch it on the apple logo appears then I get a blank slot at the bottom of the screen then the circle appears and rotates and then it switches off again, I have tried starting it again with the system disc that came with it when it was new but it makes no difference. Is there a sequence that I can use to force it to start.

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

How do I turn off Home Sharing / Switch Back to Local Library?

Last night I turned ON Home Sharing on my iPhone and switched (in the Music/iPod app) my library on the phone to use the Shared Library on my iMac. It works great and I have no issues, except...
Now, that I am away from home (and my network), I am unable to access any of the locally stored content on my iPhone and I can't figure out a way to change the library back to the local (iPhone) media library as the "Shared" button doesn't appear while I am not connected.
Am I stuck in the Shared Library until I get home and connect to my home share or is there a way to make the switch back to local storage while not connected?

I found a similar thread and it has answered my question.
https://discussions.apple.com/message/16668040#16668040
Restarting the phone will reset it back to the local library. It works, but as the other thread points out it seems a little silly that you can't do it without a restart.

Boot Camp, How to switch back to Mac OS X from Windows?

I successfully installed boot camp and Vista on my imac so I could watch netflix on my computer (other than that I have no use or patience for Vista or Windows). Now, I am in Windows Vista and am unable to switch back to Mac OS X. I have looked everywhere, including the Windows Help and Support and I can't see how to close Windows and get back to the good side.

Open the Control Panel, click on Startup Disk, and change the setting; this item will only appear if the Boot Camp drivers are installed. Alternatively, restart the computer with the X or Option keys held down; in the second case, select the Mac OS X system, push the button with the straight arrow, and change the startup disk from System Preferences afterwards.
(35215)

Video switches back to Spatial Conform/Fit appearance after Fill

Similar Messages

Maybe you are looking for