Video synch problem

hi every one i have a little problem with sync or downloading the movies to my i opd 30g.
when i sync the movie all of them don't show in my i pod and it says the movie is not compatibole format for th i-opd , does any one knows what format movie i should be using? or what to do to fix the problem?
thanks

Try using Videora or MPEG Streamclip to convert the videos.
(23472)

Similar Messages

Audio/Video Synch Problem

I have the motorola HD DVR and am using it with the Zenith 19" LCD HDTV I finally got from Verizon. After watching a channel for a few minutes, the audio and video go out of synch. If I switch the channels back and forth the problem is corected for a few minutes. Has anyone else experienced this problem?

In regards to an A/V sync problem, I've just noticed in the last two or three days that the voice is no longer synced with the lips on both of my DVR equiped TVs. One's an HD unit (but TV is Std) and the other is an Std unit. Will rebooting the units fix or improve this problem? Is there another way to correct this if that doesn't do it?

24P Advanced - Audio/Video Synch Problem on Capture

I shot some footage in 24P advanced. When I capture into FCP4 (settings are 23.98 timecode, 2:3:3:2 pulldown removal), the video and audio become out of synch (in the canvass -- I haven't bothered dragging anything to the timeline yet).
I shot with a Canon XL2 and am importing with a Canon GL2. I usually shoot with a Panasonic AG-DVX100 (and import with a Panasonic) and never had this problem before. I'm in a bit of a time crunch, so I'm starting to get very nervous.
I used "capture now," not log & capture.
Any ideas? Thank you very much.

Was the camera set at 24p 2:3:3:2, or just 24p 2:3. If it was set to 2:3, your capture settings with easy setup will simply be, DV-NTSC. If it was set to 2:3:3:2 your settings for footage from an XL2 should be Easy Setup - DV-NTSC (23.98) Advanced Pulldown Removal, and you capture setting will be changed to DV NTSC 48 kHz Avanced 2:3:3:2 pulldown removal. This captures at 29.97 (DV NTSC) and puts your footage into a 24p timeline.
I'm suspecting that your camera wasn't set to 2:3:3:2 because that is not a default setting. Which is fine for playback on a TV, but not optimal for playback to film.

IPhone 6 video synch problem/laptop HD storage

Hi,
I tried to synch my iPhone last night to my laptop. It kept telling me that there are videos that couldnt be synched because the format wasnt supported, only the videos are all from iPhones. So it continued with the synch and then It said there wasn't enough storage on the HD. So I tried to verify the disk and it wouldn't complete the action. It said I had to restart and press Command + R to try and fix it.... only nothing happened. It wouldn't allow me to do anything. It says that my HD is full of "Other files" but I can't get to the disk utility screen to try and fix it as it suggests.
And now there are 59 videos that are blank on my iPhone. Did i loose those videos?
Any help would be appreciated!
thanks

Audio and video synch problems

Whether I am recording a video or in a live chat, the audio is off from the video. Customer Support said to just try some of the different compression options. I tried that, but nothing seems to work. Does anyone have any suggestions?

Hello and welcome to the forum,
Lot of users have a Blue Yeti, even the evangelists do use them. Where is the problem, because to me it is not clear if it is linked with the micro or with your work flow.
When I'm creating a video demo I will do a temporary narration during the capture process, so that the timing is about correct for the video. It helps if you have some sort of script ready at that time. Then I will do the proper voice over (mostly using Audition) and replace the temporary narration by the final one. Perhaps some more sync is needed, but often I have to edit the video demo because I want to insert static objects, split video, etc. Here is an example of such a video:
http://www.youtube.com/watch?v=M3nKi-DB6Fw
Lilybiri

Photo synch Problem

Hello there!
I' ve got a problem with photo synch via iTunes. Everytime I try to synch the photos( doesnt matter if try it with 1000 or just 10 photos), iTunes stopps at the first photo and tells me after a few minutes, that the synchronisation has been aborted. Everything works with iTunes, except the photo-synch. I tried to delete iPod cache, delete iTunes and so on. Same problem with iPad 3! iOS is 6.0 on the iPhone 4s and 5.1. on the iPad3.
Can anybody help me, please?
Best regards,
Schröder
P.S.: please excuse my english!

And wouldn't you know it, minutes after I posted the question, I stumbled across my own answer, though I don't fully understand why it worked. Just for the heck of it, I checked "include videos" when synching iPhoto. This time, I got an error message from iTunes that some of my iPhoto videos were not supported by my iPhone 5. Then I turned video synching back off, then re-synched, and the remaining photos synched! Were I to speculate, the videos were somehow corrupting the iPod Photo Cache (even though I had never turned it on), causing all subsequent photos not to synch. At any rate, it's fixed, and perhaps someone else with the same issue has a hint on how to proceed. Thanks for reading!

AUDIO SYNCH PROBLEMS

I have never had an audio synch problem 'til now. I am running 10.5.7 on a 2.8 GHz Intel Core 2 Duo 4 GB ram, 24" imac.
iMovie 6.0.4
I have a 50 minute heavily edited project with many transitions, etc.. I have no problem with the footage downloaded from my Sony HD camcorder. I even saved many individual frames as pictures and changed them to the beat of the music in the timeline and all worked perfectly. BUT, my problem is with the "video trailers" I slipped into the timeline. The audio slips when I play back in the timeline AND when burned to DVD. BUT, it does not slip in the same place every time I preview it. If I scrub the playhead back over some of the bad scenes and play them again, they are in synch. IT KEEPS CHANGING..... When I export to a desktop movie to review - the synch problem is there and some of the audio is missing. This only happens on "movie trailers" I have downloaded.
I can't figure out why it keeps changing in the timeline and then correcting itself when I back up and play it over again. I AM GOING CRAZY........
Thanks in advance for any suggestions.
Wally

Thanks for the reply but my problem is not with iDVD - it is with iMovie - when I add "trailers" to it they go in and out of synch at different places everytime I review it before moving on. When I scrub back over the problem area and then play again, they are perfect for one time and then I try again and they are not synched. The problem is in iMovie.
Thanks,
Wally

Is this an audio/video synching issue of flash?

Hi,
Good day.
I am having synch problems with externally load FLV and audio
on my flash presentation (which is not online, but for CD)
Scenario:
- My presentation is 10 mins long with animations, embedded
audio, and externally loaded FLVs.
- the FLVs are loaded from flvplaybacks, and are set to
autoplay: true (because they load on certain timelines) and
autorewind: false.
Problems:
1. the loading of FLVs won't stick in synch with the
timeline. For example, when I readjust the timeline to fit the
length of the FLV movie, it works for awhile. But when I reload it,
or plays on second or third loop, or play on another machine, the
synching is off.
2. the audio won't stay in synch with the animations or
video. When I readjust the timeline, it would sync for awhile, but
the same happens with no.1 above (the synching goes off again on
second or third loop of the presentation, or when played on another
machine.
3. I can see the first frame of the video when it reaches the
end of the film. The original video (on .mov) does not have it.
By the way, it gets worse after a few minutes. Like after 5
minutes of the 10 mins presentation, the synching of audio and
video are completely off.
Any response or discussion would be appreciated. Thanks in
advance.
Text

Hi,
I am able to solve this using the FLVPlayback.playheadUpdate
event. I set the FLVPlayback.playheadUpdateInterval to 2000
milliseconds (or 2 seconds). FLVPlayback.playheadUpdate event gets
triggered every two seconds. In this event I check what is the
frames of the swf file that shold have been loaded (No of seconds
the video has played * 25). Then I gave a Gotoandplay command to
play from the appropriate point in my swf file.
To summarise, I am synchronizing the animation and the video
every two seconds.
Regards,
Prakash

Audio synch problem

I have a 1 1/2 hr program in HDV that I'm having audio synch problems with during export. All my frame rates for my clips are the same as well as my audio sampling rates. It will start fine, then be slightly off and by the end of the program that audio is behind by about 3 seconds. I've tried all formats, reference file, self-contained, Anamorphic DV and still no luck. Any ideas?

Exporting Quicktime movie...current settings, video and audio....just uncompressed right out of FCP.

Audio synch problem from 24 to 29.97

I am working for a tv show that is having a major audio synch problem.
We send our mix to an external sound house for our pro-tools mix. They request the file to be 29.97, though our timeline is 24. In turn, we export a 24 time line, re-import to an 29.97 timeline and than re-export at 29.97 with a time code burn. They export the mix, using a sound compressor that converts the mix to a 24 fps synch, we send them a 24 frame export that they can check it againest on their end in Final Cut Pro. For them, both the opening and end two-pop lines up. When we recieve the mix back however, and bring it onto our timeline, it is always 24 frames ahead of the picture. We can't fiugre out why.
I know this all sound very confusing.
Below is our export and timeline settings:
OUR TIME-LINE\EXPORT SETTINGS:
1st Time Line:
FS: 1280x1080
FPS: 24
Compressor: DVCPRO HD 1080i60
Aud Rate: 48.0 KHz
Aud Format: 32-bit Floating Point
1st Export:
FPS: 24
DV\DVCPRO - NTSC
Compressor: DVCPRO HD 1080i60
Aud Rate: 48.0 KHz
Aud Format: 32-bit Floating Point
Data Rate: 2.9MB/sec
2nd Time Line:
FPS: 29.97
Compressor: DV/DVCPRO - NTSC
Aud Rate: 48.0 KHz
Aud Format: 32-bit Floating Point
2nd Export:
FPS: 29.97
Compressor: DV\DVCPRO - NTSC
Aud Rate: 48.0 KHz
Aud Format: 16-bit Integer
Data Rate: 3.6 MB/sec
AUDIO MIX SETTINGS:
Data Rate: 140.6 K/sec
Aud Rate: 48.0 KHz
Aud Format: 24-bit Integer
Total Out: The audio is exactly 24 frames ahead of the video by the end of the clip
We shot on a Panasonic HDX900
Can anybody think why this might be happening?

ProTools mixes 24fps...and 23.98, which SHOULD be the case here. There is NO REASON why they should want a 29.97 mix, nor should they mix at that rate...because you are not working at that rate nor delivering that rate...are you?
Your sequence settings confuse me. DVCPRO HD 1080i60 runs at 59.94. You can get it to 23.98 with a little work...but you indicate 24fps. Is that SOLID 24fps? Not 23.98? If so...that is a major issue. You should not be working at 24fps. 23.98 is the frame rate...
Still...if you are working at 23.98 and delivering a 23.98 master, the audio guy needs to mix at 23.98. ProTools is capable of 23.98. If they can't do that, then I'd suggest finding another mixer.
Shane

Video Sync problems

I am having some major synching problems. I have a few videos and a few slides with animation and narration. When I am playing my project from a computer with a slower internet connection, the video will pause and resume after skipping a portion, followed by animations on the same slide as the video that are now out of sync with the video, and then on the next slide it will continue the audio from the video that skipped in the previous slide, over the narration from the next slide. I read about the stiched audio track that comes from continuous audio, so I put at least .5 seconds before and after each video and audio track on the slide, but that doesn't fixed the problem. I am using Connect Pro, not sure if that is an issue. Any suggestions?

Are you running the latest update patch for Captivate 5? That was reputed to fix some audio issues. Not sure if it will fix yours, but certainly worth a try.
Are you saying that the synching problems only occur when you deliver your content via Connect Pro? Does the content play fine from another location such as a web server with good bandwidth? If so, perhaps your issues could be connected with your delivery from Connect.

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
3. upgraded from 1.9 to 2.0 BIOS. still the same problem
4. reverted from 2.0 to 1.7 BIOS. the problem ended.
BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card. That was the last step (before chucking this mobo completely) in my attempts to fix the same problem. It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work. Would boot sometimes and at others gave a blue screen video error.
Flashing to bios 1.7 was the only thing that fixed it. Tried different memory, updating software, various combinations of drives, etc. For the record I tried bios 1.8, 1.9, 2.0, and 2.1. Not sure what about those updates causes problems but there definitely is something wrong.
Thanks.

Video synch problem

Similar Messages

Maybe you are looking for