Video tab is grey (unable to select different options)

video tab is grey (unable to select different options). do you guys know how to make it update videos auto?

How do you have your IPOD set to update? Auto or Manual?

Similar Messages

TS1702 my apps store screen won't move off Newstand. I am unable to select any options eg; updates

My apps store screen seems to be frozen on Newstand. I am unable to move from this section. I an unable to select any other alternatives eg; when I select updates nothing happens. When I select select categories nothing happens.

Try closing the App Store app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Microsoft outlook tab in iphoto preferences is grey (unable to select)

Unable to share photo's by entourage.

i have ms office 2008 installed. This package is with ms entourage 2008, not ms outlook.
You maybe wright that entourage is no longer supported, thats why the option is not vissible.
To solve this problem i need to purchase ms outlook i think.
Thanks for the answer.
Robby

I have iPad model ME147LL/A today for the first I went to shot a video but I was unable to select "video"; what can I do to fix this?

I went to shot a video today fort he first time, but the video button would not select so I couldn't shoot a video all other buttons worked, I could take photo etc., but could not do a video; anything?

Swipe up or down to select video option.

Unable to select different destination folder - Bridge CS3 or LR 3

When I go to save edited photos to a different folder location in Bridge Cam Raw or LR I can't see any other folder location than the Desktop (PC) or some of the program file folders none of my hard drives or network drives are showing. However, my hard drives and network drives show on the folders panel in both Bridge and LR.
I found a discussion related to this from 2012, but there didn't appear to be a solution then:
Re: CAMERA RAW UNABLE TO SAVE TO A DIFFERENT LOCATION.
Anyone have any suggestions? Both applications, although old, are fully up-to-date.

I have tried saving XML files with Tiffs and the only way I have been able to get Bridge to see the metadata changes from LR's develop module is to export the file to PS or Bridge. On export the file becomes flattened so you do not have the access to any previous layers made in PS. Also once exported from LR, you are unable to see the files history log (LR) as to the changes made in LR that had been previously written to the metadata. And of course the flattened PS element so you have no way to back track in edits if you chose to do so.

UCCX 8.0(2) caller unable to select menu option while in queue

Hi CC Community,
I am doing a UCCX 8.0(2) Premium installation with CME 7.1 and have configured an ICD script which sends the call to the available agent. I have configured the queue such that the caller can select a menu option after listening to the queue music if he needs to exit from the queue and leave a voice mail message.
I have done this before in the 5 and 7 versions but i find this wierd behaviour in 8.0(2) where the caller is unable to make a menu selection while waiting in queue. Has anyone else faced this on 8.0(2)? Any suggestions?

Hi,
I have the same experience here with CME 7.1 and UCCX 8.0.2
The user can make some choice in the menus (so the DTMF are working fine) but when he's in the queue, the DTMF are not working anymore to make a choice in a menu ?!
Did you solve it ?
Thanks you in advance !
Thierry

Unable to select repair option

I am attempting to send in my iPhone for repair, so I am going through the steps (describing the issue, etc.) It then comes to the 3rd step for Additional Information and asks "If Apple determines that the product is ineligible for covered service, tell us how you would like to proceed" and your options are "return my product without service" or "I will pay for the service". I am not able to select "I will pay for the service", is there a reason why?

I'm sorry if I was unclear. If the product has physical or liquid damage and you pay the $199 price then they will replace it no questions asked. If the product is covered by the warranty and you send it in without paying and they find the damage they will send it back unrepaired. At that point you would need to pay the OOW price due to damage and they will then replace it.
If you send it in for repair and there is no damage and they can reproduce the issue you are having they will repair or replace the device under warranty without you having to pay for anything.

TS4009 I do not have access to my I Cloud option on my IPad 2. The icon is faded and I am unable to select this option in settings.

My selection of I Cloud is no longer available in Settings on my I Pad 2.

I'm not sure about this, but check restrictions in Settings. It may be turned on.

Icannot use my mouse to select an option when purchasing

Whilst trying to purchase an item on a website, I have been unable to select an option on the item I wish to purchase. The mouse will select the original existing option on the item and will not allow me to select any other option.
I cannot select an option from This Happened question

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

I am unable to get beyond the "sync with iTunes" splash page after connecting my iPhone; every tab is grey. What gives?

I am unable to get beyond the "sync with iTunes" splash page after connecting my iPhone; every tab is grey. What gives?

Is the computer the one the device normally syncs with?
If not, sync with the computer it normally syncs with.
If it is, place the device in DFU mode (google it) and restore.

Unable to select the created Ports(greyed out) in the import manager

Hi ,
We have created some ports with specific Remote system and XML schema's and also assigned the map to it.
The processing type is manual for now,since we want to load data manually using import manager from the Ready folder of the port since PI is dropping the files there.But when I load import manager and select the file type as "Port" and also the relevant remote system ,I cannot select any of the list of ports created ,All are greyed out.
All I need is to select "Port" option ,remote system and use the created port from the dropdown list of import manager " connect to source" step,which i am unable to select as all the port s are greyed out and unable to select.
Any help greatly appreciated...

Hello Arvind,
There is no need to start the MDIS (Import server) if you are importing the data manually.you just open the import manager, login into the repository and select type as XML as per your case and select the remote system (it depends on your requirement) and select the port on which your xml files resides.and enter in the import manager then map you data accordingly and you can import into the repository.
when you want to automate the process for importing the data in repository then you will need to Start the import Server. In that case import server automatically pick the file from the ready port folder and also set the property in console as the processing type is Automatic.
Hope this will help you and clear your doubt.
TNR,
Saurabh...
Reward if found helpful.

Unable to access Firewall (tab turns grey). What is happening?

I recently upgraded from Lion to Mountain Lion. Before the upgrade I was able to change my Firewall settings. Now, every time I access Security & Privacy (after unlocking) and click on the Firewall tab I am unable to to anything. It remains unaccessible and the tab turns grey. What is happening is there any way I can change my setting to allow incoming connection to iTunes from Apple TV. I have even tried changing ipfw rules (ip and tcp) using Waterproof but that has done nothing.

Try using another browser. You can try Google Chrome or Mozilla Firefox. If it is not able to do it on another browser, try another computer. If it is not going to work, re-flash the router’s firmware.

HT2486 The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

I guess your question is, "what's wrong with the file?"
You're going to have to figure that out yourself, as we cannot see the file.
Importing into Address book requires either a tab-delimited or a comma-delimited file. You can export out of most spreadsheets into a csv file. However, you need to make sure you clean up the file first. If you have a field that has commas in the field, they will create new fields at the comma. So, some lines will have more fields than the others, causing issues like the error you saw.

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

Problem with the cmd-tab keyboard shortcut now cured with the latest software update, so the original problem must have been a software glitch.

The video tab in ipod options

Hey!! Got a quick question. Has anyone heard of something like this... When i plug my 30g video into computer start up itunes and everything is running ok, but then i go into ipod options and select the video tab, everything is grey water mark.. and i cannot select anything such as automatically update videos or manually or anything like that, and i do have videos in itunes and on my ipod already i dont know what it is, please help, much appreciated thanx

The Video tab is all greyed out if you have your iPod set to Manually manage music (in iTunes -> Preferences -> iPod -> Music).
If you are manually managing music, you must manually manage videos as well. You do this the same way you copy music over to your iPod.

Video tab is grey (unable to select different options)

Similar Messages

Maybe you are looking for