VIDEO_TDR_FAILURE on GT60-OND , please help
This started 4 days ago .Have formatted 3 times sense and used so many different drivers. Many drivers will fail to install . I am using 327.02 drivers right now after a fresh format and still BSOD .Any ideas out there or maybe this lappy is ready for warranty
Thx
Check the temperature of your GPU using MSI Afterburner or some other monitoring program. What is it when the error happens? What are you doing when that happens?
Similar Messages
-
Hello all
my NB gt60 OND wont turn off normally.... after the windows shutdown the screen goes black and the LED light of the keyboard is on with the light on the power button after that i need to force it... at first i thought it was the bios so i flash it to w8_E16F3IMS.70X (the NB came with w8_E16F3IMS.50X) but the problem is the same .... then i suspected it was the windows so i install the factory window but it continue.... so then i format all the disk and still have the problem.....
please anyone has a solution for my problem or i just keep forcing it to shutdown? but i think it is bad for the NB..
thanks in advance..
ps: sorry for my bad English it is my third language.So I am back after testing all memory stick individually with MemTest86 v4.3.3 ( Dos version ) . All are fine according to the test.
After successfully installing Win7 x64 in Legacy mode, I was able to shut down the laptop but with a 15 seconds delay with a frozen ''Shutting down'' display in the Win7 background. ( spinning wheel was frozen ).
However, I did try the full sleep mode but wasnt able to get it out. It looks like its behaving just as the Win8 installation ( both EUFI and Lecacy ). Freezing on the Amber light. Its not that I can get out. Its not fully entering the sleep mode. I would presume that in hibernating mode the light would blink slowly showing the OS is powered down but laptop still receiving power. I need to hold the power to shut it down manually.
So we are back to square 1. Imo, the issue is from the motherboard but its not necessarly defective. Might need a BIOS upgrade. One Thing I've noticed ...was that if the windows installation has the keyboard light software installed, the keyboard stays on when the laptop if frozen trying to shutdown ( blackscreen ). As Luigi said , I can Activate and desactivate the GPU Fan and turbo ( like Luigi ) when in that state. -
Problem with threads and simulation: please help
please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
private JButton choices[];
private String names[]={"line", "square", "oval"};
private JPanel buttonPanel;
private DrawPanel drawingArea;
private int width=300, height=200;
public void init(){
drawingArea=new DrawPanel(width, height);
choices=new JButton[names.length];
buttonPanel=new JPanel();
buttonPanel.setLayout(new GridLayout(1, choices.length));
ButtonHandler handler=new ButtonHandler();
for(int i=0; i<choices.length; i++){
choices=new JButton(names[i]);
buttonPanel.add(choices[i]);
choices[i].addActionListener(handler);
Container c=getContentPane();
c.add(buttonPanel, BorderLayout.NORTH);
c.add(drawingArea, BorderLayout.CENTER);
}//end init
public void setWidth(int w){
width=(w>=0 ? w : 300);
public void setHeight(int h){
height=(h>=0 ? h : 200);
/*public static void main(String args[]){
int width, height;
if(args.length!=2){
height=200; width=300;
else{
width=Integer.parseInt(args[0]);
height=Integer.parseInt(args[1]);
JFrame appWindow=new JFrame("An applet running as an application");
appWindow.addWindowListener(
new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);
DrawShapes appObj=new DrawShapes();
appObj.setWidth(width);
appObj.setHeight(height);
appObj.init();
appObj.start();
appWindow.getContentPane().add(appObj);
appWindow.setSize(width, height);
appWindow.show();
}//end main*/
private class ButtonHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<choices.length; i++){
if(e.getSource()==choices[i]){
drawingArea.setCurrentChoice(i);
break;
}//end class DrawShapes
class DrawPanel extends JPanel{
private int currentChoice=-1;
private int width=100, height=100;
public DrawPanel(int w, int h){
width=(w>=0 ? w : 100);
height=(h>=0 ? h : 100);
public void paintComponent(Graphics g){
super.paintComponent(g);
switch(currentChoice){
case 0: g.drawLine(randomX(), randomY(), randomX(), randomY());
break;
case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
break;
case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
break;
public void setCurrentChoice(int c){
currentChoice=c;
repaint();
private int randomX(){
return (int) (Math.random()*width);
private int randomY(){
return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.
-
Apple Mini DVI to Video Adapter is not working. Please Help...
I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...
Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko -
Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
LeicaHi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian -
Error Log during logon of RAR 5.3 Portal - please help
Hi Experts,
We are unable to login into the CC portal [GRC RAR 5.3]. The login screen is appearing again and again without logging into the CC portal
Below is the log file which we are getting and we understand that the product is not responding properly to the application
Can somebody please help us in resolving this at the earliest
Thanks in Advance
Best Regagards,
Srihari.K
Date : 12/05/2008
Time : 2:38:16:008
Message : Exception of type com.sap.sql.log.OpenSQLException caught: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?"..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Severity : Error
Category : /System/Database/sql/jdbc/common
Location : com.sap.sql.jdbc.common.CommonPreparedStatement
Application : sap.com/tcwddispwda
Thread : SAPEngine_Application_Thread[impl:3]_32
Datasource : 1666450:/apps/usr/sap/HLG/JC00/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BAF96A51006E0000001F0000265200045D4A46588084
Source Name : com.sap.sql.jdbc.common.CommonPreparedStatement
Argument Objs : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Arguments : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Dsr Component : n/a
Dsr Transaction : d2d9c100c2b811dd9eb60003baf96a51
Dsr User :
Indent : 0
Level : 0
Message Code : com.sap.sql_0019
Message Type : 1
Relatives : /System/Database/sql/jdbc/common
Resource Bundlename :
Session : 92
Source : com.sap.sql.jdbc.common.CommonPreparedStatement
ThreadObject : SAPEngine_Application_Thread[impl:3]_32
Transaction :
User : ac_adminHi,
The shear length of your post is frightening - this would keep many potential replies away !!
What i woudl recommend is --> Open an OSS messgae ! This would resolve your problem !!
Thanks -
Lock-Ups and Freezes PLEASE HELP
Hello everyone..
I come here to see if anyone can help me... Ive done it all and nothing is working.
I just recently started having problems with my computer, im not sure why this happend but ill try to explain everything as best as I can.
The problem started a few days ago while I was playing SWG's. I was playing and all of a sudden my machine froze, the screen locked-up and then after about 2 min the entire system restarted. I then logged back into my windows and after a while a system froze and restarted yet again. I though it was a SWGs issue but then the computer would freeze while browsing the net and doing other tasks.
I have formated my machine, re-installed my drivers, and re-installed the hardward. Nothing has worked.
My computer specs are
300watt PSU Enermax True Power
MSI K7n2 nforce2 8xagp mobo
athon 1700xp
512mb of Kingmax DDR 2700
SB audigy x-gamer sound card
MSI geforce4 ti 4200 8xAGP graphics card
Hope thats enough..
One last thing... When my computer restarts after the problem i get a message asking me to report the problem to microsoft... i located the error file and this is what was writen in it....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-07-19 01:30:24
TimeZone: 300 - Eastern Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 5
Shutdown: 0
EventCount: 5
BreakCount: 5
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: MSI MS-StarForce GeForce4 Ti 4200 with 8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
HardwareID: PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C1C 0006000D 000A0C1C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverFileVersion: 6.13.10.3100
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverProductVersion: 6.13.10.3100
Hope this helps, i dont understand what it means so maybe one of you might...
Please help me on this... Ive tried everything i can...
Thanks in advanceIf what you are saying, and I am reading correctly:
The machine and game was working just peachy and all of a sudden the problem manifested itself?
Did you do ANYTHING to change your system prior to this happening to possibly have an effect?
the fast that you said you have re-loaded the OS and removed and re-installed the hardware with the same result tells me that there may be some sort of hardware failure and this could get difficult to troubleshoot.
First things first, try a memory testing software like memtest86 to see if you get any errors.
http://www.memtest86.com/ -
my app store wont let me download apps, says there not available in the uk?? please help??
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
My phone wont let me download anything even free stuff or update.it keep saying something wrong with my billing info so i fix it but still cant download.I signed out sign back in still nothing please help i'm getting angry
If it says your billing info is wrong that means that your credit card issuer is refusing to approve your account. You will have to solve the problem with your bank or credit card company.
-
I bought a iphone 3g from a friend and i dont know how to update ios 5 and 6 because i dont have the setting in my phone and it wont let me download any apps tell i have it updated. someone please help?
You don't the highest IOS for a 3G phone is 4.2.1 you can't get the lastest IOS.
-
ITunes wont open and status light flashs orange. PLEASE HELP!!
I turned on my computer and plugged it in after loging into Windows XP. iTunes wouldnt open and when I tryed to click it open it wouldnt work. I then safely took out my Shuffle and restarted my computer. Then repented the above process and no luck. Can someone please help me?
Try the new shuffle reset tool.
http://docs.info.apple.com/article.html?artnum=303979 -
i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV. -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.
Maybe you are looking for
-
Opening raw files in PS7.0
want to open raw files. Add on?
-
Nokia exclusive ESPN app not available for 710 in ...
Is Nokia exclusive ESPN app available for Nokia lumia 710 in India I am looking for many times but I didn't fount that ....... Nokia site states that the app is available for India ..... But I didn't find one ... On Nokia collection .... Please give
-
Can't get old calendar onto new phone. Help!
Hi - just got a replacement Droid Inc. 2 for mine that was dropped and shattered yesterday. Having a problem getting my calendar from my old Inc. 2 to sync with my new Inc. 2. I've never kept a calendar on Google, just kept appointments on my phone.
-
SQL Developer Tool Throws error on "/"
I am executing a script which is creating a view using sql developer. The script at the end has a "/" but before the / there is a blank line on top. and another view does not have a blank line but has a few spaces before "/" both the cases the sql de
-
I've had my Mac for over a year with no problems. In the last week I have started dropping my internet connection. I've try all the fixes in the Apple Support website with no luck.