Video tearing just started happening
Hello, does anyone know of any recent problems with video tearing on their monitors after updating the system software? I just started having these video tearing problesm (which I'd only heard about before in Intel Macs) and it's mostly with darked color areas. Anyone any ideas? Can remove a software update?
Thanks, Kevin
What kind of display do you have? What resolution is it running at? How are you hooked up to it (VGA or DVI)? Details please.
Similar Messages
-
Weird Problem just started happening, spinning ball when trying to play
I'm having a problem that just started happening, I've been using Final Cut Pro 5.04 in 10.4.8 on a G4 dual 800 for a long time now, no problems.
Today, I'm doing some Voiceovers, using the V.O. window, not even playing video, and it's doing this thing where I try to play a segment of recorded audio, and the beachball starts spinning for 15-20 seconds, and finally it plays the little snippet. I play it a couple times, it's working normally, then again I try to play it and it waits 20 seconds before kicking in.
I have no idea what to look at to fix this. I didn't change any of my settings, I'm recording onto a drive with about 5 GB of space...
I'm using a MOTU 896 firewire interface for audio.
Any ideas would be appreciated. Thanks!I believe there is an issue with updates and firewire from the posts I have read over the last few months. Not sure what to tell you but did you update the OSX resently? Or Quicktime? If I were you I wouldn't update anything just yet. And perhaps you call roll back the OSX to a time and version that worked for you.
Good Luck
Z1&V1user -
When I play Flash videos, i.e. YouTube, the sound is barely audible. I have to crank my speakers way up to hear anything. When I open the same video in IE or Chrome, I don't have that issue, the sound is normal. This just started happening about a week ago, and I have the latest plug-in. I also only have one version of Shockwave on my plug list.
Try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:<br />
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html<br />
<br />
See also Flash Local storage settings<br />
http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html<br /> -
I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?
Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated! -
This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune 11.1.3 and it still gets stuck.
i use an external HD and thats fine.. all files are in there. But I have no idea why my itunes app is getting stuck.
Am I the only person this is happening to? What can I do to correct this problem?Hi marlonbnyc!
This article will help provide some basic troubleshooting steps that will serve as a guide for you to resolve this issue:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Printer is overprinting old jobs on top of new jobs. Using a Mac with OSx and a HP photosmart for over a year. this just started happening.
RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.
-
Every single website url address, or url address within a website page is being added to my location bar/address bar drop down menu.
I don't want everything added or saved in the location bar. Only urls that I used a lot used to be saved there but now every single url (and url within a url)I visit is being added to it.
How can I stop this? This just started happening.
I'm sure it's a simple browser setting but I've checked and nothing gives an option to control this.
Firefox 3.0.17
Windows XP
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17A possibility is to open the links via the right-click context menu or a middle-click in a new tab to make sure that Firefox sees them as regular links.
-
When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document" This just started happening today. The only thing I have done differently is change my file handling to raw + jpeg on my Nikon 7100.
I downloaded camera raw 8.7 and I am now able to open my raw and jpeg files. Thanks
-
Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.
Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium -
My hard drive desktop suddenly will no longer hold or maintain the icons in place when I shut down and restart. The icons all change positions, alphabetically. Just started happening. I prefer the icons to a list format. Concerned this might be a symptom of a larger problem. Any thoughts?
revmandanIt's normal for the icons at the top level of the startup disk to revert to the same arrangement every time the Finder is relaunched. If it's important to you to arrange those icons in a persistent way, proceed as follows.
Back up all data.
Open the Info window on the startup disk (labeled "Macintosh HD" unless you gave it another name.) Click the lock icon in the lower right corner of the dialog and authenticate.
In the Sharing & Permissions section, click the plus-sign button to add an entry to the access list. Give yourself "Read and Write" access. This will be a temporary change. Leave the dialog open.
Open the Finder window and arrange the icons as you wish, then close the window.
In the Info dialog, use the minus-sign button to delete the entry you just added to the access list. Don't change anything else. When you're done, it should be the same as when you started. Close the Info dialog. -
While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening this week. All other websites are ok.
You're welcome
-
When I type my email address in the "To:" field, a random name comes up next to it as "Holidays in United States". This just started happening out of the blue and I have no idea why. Does anyone else have any idea?
Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
In Adobe Send, I have sent files several times now and when the recipient clicks the link to open, it says page cannot be found. This just started happening. What needs to be corrected?
I can think of a couple of reasons for this behavior.
You inadvertently turned off the sharing for the files.
The link that the user is clicking on is incomplete; perhaps it got broken across lines in an email message. Are you sending Anonymous Links or Personalized Invitations? If the former, are you certain that you copied the entire link?
Some things to try.
Have the user send the link back to you so that you can test it. Does it work for you?
If you look at your Sent Files list, is the name in the Sent To column struck through (e.g., John Smith)? That would indicate that it has been unshared.
If you could get back to me with answers, perhaps we can get to the bottom of this. -
My mac has started sending yahoo emails out as if they were being sent from an old gmail account I haven't used in years. Why has this just started happening?
It is important to understand that Mail uses TWO servers, a Receiving Server and a Sending Server.
When you create a new mail message, or reply to a message, the Sender server is shown in the message composition window like this:
That drop-down window allows you to select which of the Sending Servers you previously set up should be used.
In general, once you choose a Sending server, its choice will "stick" for all future replies to messages from that Receiving mailbox. -
This message just started happening...I use IE as well and have no problems.
I prefer Firefox and I hope you can resolve this.Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link.
Maybe you are looking for
-
How to open an excel template and display onto a table in Laview
Hi all, I would like to open an excel template file. Once called up, I would like to display it onto a table in Labview. From there, I would like to write data to the colums or rows in it. Can I do that? What do functions do I need. Please show some
-
Hi all! I have an issue with objects linking. on the Service Call UDF Panel (form type -60110) i have EditText with Return Document number (docentry) i want to create drill down orange arrow quite near this field. 1. After adding orange arrow - its i
-
Problems opening an illustrator pdf in photoshop
i'm designing a poster in illustrator. its all vectors so its all clean and crisp. I have to bring it into photoshop to add metallic pantone gold, so in order to bring it over i have to save it as a pdf. but when i open it up in photoshop it becomes
-
HT201401 my iphone is refusing to update to iso 7
my phone is refusing to update to iso 7 any ideas why this is happening
-
When I purchased a movie it sayed it was assisted with an Apple ID
When I purchased a movie it sayed it was associated with an Apple ID and I. Pis use another Apple ID in 90 days