Video Test site

Good Day,
I would like to setup a Video test site, where people can connect to my device and then I just loop back their transmitted video back to them.
What opions do I have or any recommendations on how to set it up?
I have a Cisco C60 codec and VCS available.
thank you,

I don't know if you were joking or not but I actually do Skype to myself between my PC and my wife's when I need to run a quick test.
I do agree it would be great if Skype saw fit to provide some test servers for video. I'm holding my breath though.
Please note: I do not respond to requests for help via Private Message.

Similar Messages

E Mac I cant see any videos in sites like Youtube. I have versions 10 in the application folder and Mac version 7.6 in the utilities folder. Any help would be MUCH appreciated. Thanks.

I can't see any videos in sites like Youtube. I have Quicktime Mac versions 10 in the application folder and Mac version 7.6 in the utilities folder. Any help would be MUCH appreciated. Thanks.

*** may have found a fix ? *** Thanks to your post re: GDI objects I checked task manager ( added column "GDI objects")and saw 700+ whereas working 6.18 was 160 ish Got thinking - what could possibly use that many GDI objects ( firefox only uses a few hundred and it's a platform ) Then it hit me - emoticons ! So in tools/ options/ IM&SMS/ IM Appearance unchecked "show emoticons"and also unchecked "show images and other media previews"restarted Skype and GDI objects now only 164 ( down from 729 )and all other windows are repainting fine and are usable again( my problem was RDP sessions that became unusable, as I work remotely ) To be sure, have rechecked the options and restarted skype and see 700+GDI objects ( goes up from 660 when place call to echo/sound test )and removed them again to get only 164have also rebooted a few times and gone through the whole processof unchecking emoticons, restart, rechecking emoticons, restart to make sure itsnot a fluke. pretty sure this has fixed it for me ( so I now have a working 7.6.0.105 on XP SP3 ),and as your problem "sounds" the same I hope it also works for you. Thanks again for the GDI hint

Embed video from video hosting site?

Hi,
I use Viddler as a video hosting site. Is there any way to embed either an iFrame or other embed code in a slide? Ususally the videos are too big to place directly into the project.
Thanks!
Mark

I've never used Viddler, but if it's similar to YouTube, you might try the Web Page Widget by CaptivateDev. I've been testing it lately and it seems to work great for YouTube. You can download a free trial to take a look at it.
Dan

Local Test site will not transfer files to prview in browser

I designed a web site in DW the remote site works/views correctly, but the local testing site index page will not preview below the header in any browser with the files it need to view corrrectly.
I am working on a mac 10.6.8 using DW 5.5. I had my local testing server working correctly viewing these files from a browser for about 1.5 year then it stopped working and stopped transfering some files from the index page.
The activity report lists all the files that were not transferred.
and this report;
File activity incomplete. 2 file(s) or folder(s) were not completed.
Files updated: 2
Files skipped: 20

Just to clarify, you have defined a Local Testing Server in Dreamweaver.
What are the setup details for your testing server?
You have installed either MAMPP, XAMP or WAMP on your computer.
Are you sure your server is running?
Does your index page contain valid code?
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Video test failed in graphic card laptop g50-70

when i run hardware scan in lenovo solution center, i got waring graphic card video test and got result
Result code: WVC003000-DK7X2I
Video Card.
so i want to know why test show warning in my graphic card

hi bhavik455,
Welcome to the Forums.
Getting an error on the Lenovo Solutions Center (LSC) Hardware Scan might mean that the GPU is failing. This comes with a sign like lots of BSOD that's pointing to the graphics card, artifacts on the screen while playing games / videos, or the machine suddenly won't show a display.
If you're not experiencing any of the above symptoms then it's likely that the graphics card on the unit is functioning properly and the LSC is just showing some alse positive errors.
To verify, try running a stress test on the GPU to check its stability by running OCCT or similar utility.
Guide:
How to Test NVIDIA/AMD Performance with OCCT (works in Win7/8/8.1)
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For the last year, I have to refresh my browser to load certain normal pages...IE opens them, but not Firefox. I also have extreme difficulties loading video from sites including YouTube, Yahoo, etc. I open them in IE just fine. I update all the time.

For the last year, I have to refresh my browser to load certain normal pages...IE opens them, but not Firefox. I also have extreme difficulties loading video from sites including YouTube, Yahoo, etc. I open them in IE just fine. I update all the time.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

How do I update a test site created in Muse.

How do I update a test site created in Muse.
Martyn King

Hi Martyn,
Please see this article for instuctions on how to access and edit your Muse site.
-http://www.adobekb.com/signing_in_publishing.html#top7
For additional Muse help please reference this page. - http://helpx.adobe.com/muse.html
Kind regards,
-Sidney

Mom's IChat won't connect to apple test site.

Trying to IChat with the mom on her older IMac. She runs OSX 10.2.8 with 768RAM and with IChat 2.0 We used to have no problem when I was in China and she in NYC. Now, nothing works. I can connect into the apple test sight, so the problem doesn't seem to be on my end. When she starts Ichat, she can preview herself, and gets a camera icon by her name. I see her on my Buddy list with a camera icon by her name. However, she only sees me with a phone icon, and she only sees the apple test site with a phone icon. Any ideas would be most appreciated.
Powerbook G4 Mac OS X (10.4.8) 1G Ram 1.25 Mz 80G HD

Thank you, Tony. The problem was solved immediately. Now Mom can watch her 4 year old granddaughter dance. Let's just say, your advice made for one very happy Grandma.

I have installed and reinstaled Flash. When I go too your test site a Star pops up and it isn't work

I have installed and reinstaled Flash. When I go too your test site a Star pops up and it isn't working. I need some help with this.

Welcome to the Adobe Forums.
The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information that you haven’t already (where applicable):
    •    Adobe product and version number
    •    Operating system and version number
    •    Browser and version number (where applicable)
    •    The full text of any error message(s)
    •    What you were doing when the problem occurred
    •    Screenshots of the problem (if possible)
    •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

Both can connect to test sites but not videochat with each other

I am using a 2GHz PPC iMac on 10.4.6 with external iSight. I can see the Apple ad from one of the test sites. My wife is using a G4 PowerBook running the latest Panther OS with external iSight. She is in a hotel but can also see the Apple ad from the test site. When she was home, we could videochat over Bonjour.
But, while she is in the hotel out of town, we couldn't videochat with each other. Whether one initiated or the other did, we both get the "XXX failed to respond" message even though we obviously did accept the videocall.
If we both can videochat with the test sites, how come we cannot videochat with each other?
Given the above, I hope some experts can rule out a bunch of stuff and let me know the finite (and small) set of potential reasons affecting our situation so that I can work on resolving this efficiently.
What could be the likely problem?
On my side, I use an Apple AEBS that uses DHCP and NAT but my iMac is manually set to 10.0.1.201. I have set the ports in Firewall but even when I turned off Firewall it did not work.
Any help is much appreciated.

Hi Heng-Yee Yong,
The test sites are most likely set to have the ports open by UPnP which does not use NAT.
If you modem is routing and is using Port Forwarding and the Airport is as well then you have two lots of NAT going on at your end.
I would Open Airport Admin Utilty (Applications/Utilities) and log on to the Airport
Go to the Network tab.
Deselect Distributing Addresses which wll trun off NAT in the Airport and make it a Wireless access device.
This means your computer will have to take an IP form the Modem.
This may not be rquired if the modem id is Bridge mode itself as this measn it is not routing and all port will be open without the use of NAT.
This App can help identify if NAT is a problem
http://bleu.west.spy.net/~dustin/projects/natcheck.xtp
Or at least whether you have Consistent NAT or not.
8:50 PM Wednesday; April 26, 2006

Mea Culpa - Internet Explorer now renders my iWeb 2 test site correctly?

After umpteen server tweaks I finally got my iWeb 2 test site uploaded
http://www.mjweber.com/mjwredsite/mjweber/welcome.html
It displayed as designed in Safari on my MBP. I then fired up XP in Parallels and loaded the site in Internet Explorer. I didn't expect it to work but it did. Now I'm really stymied!
I've had numerous compatibility issues with iWeb 2 and IE in the past week paralleled here by hundreds of other posts here. Now, when I finally upload the site, it suddenly works?
Either the Internet gods are playing with me or the IE incompatibility stems from launching a published iWeb 2 folder from a local XP hard drive. That's where my navigation menus didn't display. What else can I say? I'm going to have a drink.
I'd appreciate independent site validations by anyone not using Safari or OS X... Linux, Unix, Windows, Netscape, IE, etc. Thanks!
http://www.mjweber.com/mjwredsite/mjweber/welcome.html

Hi thanks for the advice, the text is centred vertically , left aligned and there is plenty of space at the end. I will try increasing width/height but not sure if that will help as box is already much bigger than text.
In fact it works perfectly on another web page ...thats what surprising ....even the html for the two pages is identical from what we can see!
Take a look at
www.cibsys.com/cibsys1/index.html on the UK site and run down the various pages on the left side to see what happens (if you have IE on a PC). On the PC on some pages perhaps 30% eg workflow services the menu on the left fails to draw correctly leaving the text un readable.
Thanks

IPad stop playing videos from sites

Today my iPad stopped playing videos from site. IT WORKED YESTERDAY so iPad CAN play it. When Im trying to play video there is a crossed triangle so I can't press it. Please help!

Its not theirs (player) they posts videos from vk.com . On this site it's ok to run video but on all of the others which have videos from vk it's not working.

I have an iMac, 2015 model. operating on OS X 10.10.2 and whenever I click on just about everything in safari it opens a new tab with an ad on it. sometimes the ads are mackeeper or video hosting sites but they are just so annoying.

I have an iMac, 2015 model. operating on OS X 10.10.2 and whenever I click on just about everything in safari it opens a new tab with an ad on it. sometimes the ads are mackeeper or video hosting sites but they are just so annoying.

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Password protecting test site

Hi I wanted to password protect a test site I have been making to show to selected people. I found this tutorial using PHP which seems pretty straightforward.
http://www.zubrag.com/scripts/password-protect.php
The one problem is it says It will show you protection code to include into your pages. "Sample protection code would look like this (yours will be different): <?php include("/home/users/htdocs/security/password_protect.php"); ?>
Add that line of code to each php page you would like to protect at the very beginning of the page source (it must be the first line)." Now the problem is that my page is html based, can I add a token PHP page to my index page that just has that bit of code in to password protect it and how would I add the PHP page?
Thanks in advance

Hi
Try the htaccess generator for dreamweaver extension - http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1698154.
Check with your server provider to ascertain you type of server you are using as this requires Apache, but similar code is available for IIS.
The htaccess file is a simple file that you upload to your server and will 'point' to the folder you wish to protect.
PZ

Creating large video portfolio site? Project's getting slow and buggy? Here's a solution:

If, like me, you're creating a large video portfolio site (over 50 vids) in Edge, you may find after a while elements on the stage start to vanish (they're still there but invisible) and the program REALLY slows down. And lots of crashes. I've asked the experts and the response generally seems to be "Site's way too big!" HOWEVER, I have a good workaround:
After importing a Mpeg4 and Webm file into the video library, put it into your design, animate it, add functions, preview it, etc - then DELETE it from the media folder! The elements remain with all the attributes and code attached on the timeline, stage and elements window - but it's just a placeholder. Once you've done this, you can move on adding more and more videos, repeating this process. The project file never gets too big or slow! Then right at the end, put all the Mpeg4 and webm files back in the media folder. You might not be able to launch the project and preview (it'll be too big) but you can still drop it on your browser to check. And, if all's good, upload. If there are things that still need fixing, take the video files back out the Media folder so that when you launch the project file again to make amendments, it'll run smoothly. After fixing, put the videos back.
Hopefully in the next full version, Edge is made more robust and able to tackle.

If, like me, you're creating a large video portfolio site (over 50 vids) in Edge, you may find after a while elements on the stage start to vanish (they're still there but invisible) and the program REALLY slows down. And lots of crashes. I've asked the experts and the response generally seems to be "Site's way too big!" HOWEVER, I have a good workaround:
After importing a Mpeg4 and Webm file into the video library, put it into your design, animate it, add functions, preview it, etc - then DELETE it from the media folder! The elements remain with all the attributes and code attached on the timeline, stage and elements window - but it's just a placeholder. Once you've done this, you can move on adding more and more videos, repeating this process. The project file never gets too big or slow! Then right at the end, put all the Mpeg4 and webm files back in the media folder. You might not be able to launch the project and preview (it'll be too big) but you can still drop it on your browser to check. And, if all's good, upload. If there are things that still need fixing, take the video files back out the Media folder so that when you launch the project file again to make amendments, it'll run smoothly. After fixing, put the videos back.
Hopefully in the next full version, Edge is made more robust and able to tackle.

Video Test site

Similar Messages

Maybe you are looking for