Video timeline in ps cs6 blury when playing

All text and photos look good but when i hit play everything becomes pixelated. Any reason why?

I replied to your post in the main PS forum. No need to use duplicate posts.
Mylenium

Similar Messages

  • Why would my video clips be running too fast when played on the monitor panel?

    I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
    My main question is: "why would my video clips be running too fast when played on the monitor panel ?".  This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline.  I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline.  They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes.  I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
    The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ?  Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
    After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips.  They are in their original state.
    Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
    Help would be greatly appreciated.

    Yes, that is what the problem was.
    Although the video camera on my Nokia N8, mobile was capturing at 25fps,
    for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps.  Once in Interpret Footage I was able to change the fps to 25.
    Thanks for the help.

  • How do I insert additional clips into my video timeline in Elements 13?  When clicking 'add media' it added the clips at end of video rather than in their appropriate position.  Could not 'cut and paste'.

    How do I insert additional clips into my video timeline in Elements 13?  When clicking 'add media' it added the clips at end of video rather than in their appropriate position.  Could not 'cut and paste'.

    bhsleadership
    I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
    For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
    1. Are you working from the 8.0/8.0.1 Update of the program?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
    2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
    For Background Rendering option. See Edit Menu/Preferences/General.
    For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
    Is your computer optimized in spite of the fact that  you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
    Looking at the properties of your source media, I see:
    video compression = MPEG1
    audio compression = MPEG-Layer1 (.mp2)
    Frame Size = 640 x 480 (4:3)
    Pixel Aspect Ratio = 1.0
    Frame Rate = 30 progressive frames per second
    With properties like those you are sure to get a red line over that content since there is no project preset with that description.
    But, your choice of the default NTSC DV Standard would have been mine also.
    I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
    To be continued.
    ATR

  • Videos created on ipad are black when played on picasa and quicktime.  How do I fix this?

    Videos created on my ipad2 are black when played on picasa and quicktime.  How can I remedy this so any player can use the video without having to use handbrake to convert?

    Assuming that you are trying to update apps that you bought with your own ID .... Try changing it in the app store app. Tap the featured tab in the App Store. Go down to the bottom left corner. You can access your ID in there as well. See if your son-in-law's ID is still showing. If it is - tap it and sign out. Sign in with your ID.
    If you are trying to update apps that he bought with his ID, you have to use his ID and password to update them. Apps are always tied to the ID that was used to purchase them.

  • I used to be able open video files in Photoshop CS6. When I try to open it now it says "Could not complete your request because it is not the right kind of document."

    I don't know what I did. I started messing around with After Effects and accidentally opened up Adobe Media Encoder Queue. After that, that's when I noticed the problem. I can still import the video frames into layers but I can't open it up directly. I tried opening .avi, .mkv, and .wmv files. Also just noticed I'm missing the "change timeline view into video view" button.  Any help will be appreciated! Thanks.

    You either borked your hardware acceleration stuff by changing graphics settings/ installing a different driver or you messed up your CoDecs (and the associated hardware acceleration options) by installing a Codec pack or alternate media player... Impossible to be more specific, since you haven't bothered to provide even the most basic system info.
    Mylenium

  • Youtube widget produces videos that don't work correctly when played in iWeb

    Get a flashing video when embedding a Youtube video in an iWeb window using th Youtube widget.
    Video plays OK in Youtube.
    Used iMovie to prepare the Quicktime movie and used settings recommended for Youtube uploading.

    The YouTube widget stopped working when MobileMe was discontinued 2 years ago. The widget needed the MMe servers in order to work.
    To add a youtube video go to YouTube and get the embed code for that video.  Back in iWeb use a regular HTML widget with the embed code.
    OT

  • How do I change effects in 'Altered Video' timeline in Photoshop CS6?

    I added a filter to my video but it only lasts for a few frames. There are little marks shown where I added it in the Altered Video section of the timeline.
    How do I apply a filter or effect to the entire clip?
    Also when I ad a filter such as Lens Correction, it only lasts for a few frames..How do I get it to remain?

    I was going to Move that thread for you, but could not get it to go to Photoshop General Discussion - that option was grayed out.
    Maybe Pierre, who Replied in that thread, will have more access, and can accommodate you.
    Good luck,
    Hunt

  • Flash Video Slows Down Website Load, Lags When Playing

    Hello, I am a designer that has encoded .Mov files to
    .Flv in CS3 Flash Video Encoder. They look and play great
    when previewing on my hard drive, but once uploaded to the website
    host, the pages load much slower and the video sometimes stops
    & lags, like it is waiting for it to load.
    I used Flash CS3 Video Encoder,
    settings: On2 VP6, 246kbps video, 32kbps audio; resized to
    320x240. File sizes range from 5mb-13mb. When I inserted into
    the html page in
    Dreamweaver, I choose the
    Flash Progressive Player. There are a lot of videos on this
    website, approx. 20, but only one per page. The site is hosted by
    godaddy.com.
    Here is the temp site:
    http://www.wondernumber.com/testing I thought this would be
    handled by a programmer, but it got stuck in my lap. The client is
    anxious to get this project done!. Any help offered is greatly
    appreciated!!!!!
    ~Jana

    Hi, thanks for the reply. I actually gave in yesterday
    morning and reduced the quality of the video from 400 to 150, and
    the sound from 96 to 16. Does play through now but doesn't look or
    sound as good.
    Do you think if I put the videos on a dedicated server I
    could raise the quality and they would play smoothly?
    Thank you! ~Jana

  • Video frozen into just a picture, when played all you see is part of that vid as a pic and my audio section in the background?

    Hi, Im just editing our holiday video and i played around with a clip and now its frozen into just a picture and when i play it only the music in the audio section plays and all you see is a frozen picture from the video. What do I do? Thanks! DAN

    Ye im also using a theme. I found the answer
    You have to...
    right click on the part thats not playing
    Click revail in finder
    Then drag the hilighted scene do your desktop
    Import it
    Then replace it
    And it works !
    Contact me if any problems, im more than happy to help...

  • K1 - Video captured by K1 has sound when played onboard, but muted when uploaded and played in PC

    I am not sure if I have done anything wrong. But, all video recordings that I used K1 to capture will only have sound played out while on K1. When the videos are uploaded to my PC (Win7-64bit Pro) and played in WMP, the sound disappeared.
    On the lower left corner of WMP below the glider bar, there is a wavy block. When I put the cursor on it, it shows the message: "Network is too busy to play file at original quality".
    Any suggestions are appreciated.
    H

    Hi
    I presume that the resulting "internet" video did contain the original 'dialogue' audio, just not your additional music?
    When exporting to a movie, there is a dialog box where you can select which of the original movie's audio tracks to include (the "dialogue" audio). If you choose to keep this, you will get a video with multiple audio tracks (Dialogue and Music). Often the additional tracks are removed when uploading.
    The solution is to import the original "dialogue" audio into Logic, mix appropriately, then export to movie *without* the original track from the original movie (ie you get 1 audio track with everything in it, directly from Logic).
    HTH
    CCT

  • Video quality is less than expected when playing inside Flash

    iam using flv video. i played it back in many ways , with flv player that comes with flash ,as embedded in the time line and using external class that use  NetStream ,the video quality was less than playing the same video  outside the flash invironment using any  stand  alone video player like media player classic .
    why is that happening , did i miss some thing ?
    is there a setting  that i should do to play hd video in high quality ?
    i have tried setting stage.quality to BEST but it didn't affect the video quality ?
    any help  ?

    can't I just change the "Easy Setup" settings so it would work without degrading the input and subsequently the output? Sorry, I don't quite grasp "fixed-resolution" yet so may be asking something that doesn't have an answer.
    FCE only works with certain presets available in the Easy Setup menu. If your footage isn't one of these resolutions then FCE will conform it to the sequence you have selected, downgrading the footage in the process. Final Cut Pro gives you the option to make a sequence set to the dimensions you want it to be, without worrying about whether your image matches a preset.

  • AVCHD CS6  no audio, only video. Even though movie and audio works when played in VLC

    I import via media browser.
    I have copied the entire memory card directory.
    VLC will play may .mts files.
    Adobe Premiere Pro cs6 will not play the audio
    There is no audio on the timeline.
    Why is that?
    Please help me...

    FAQ: What information should I provide when asking a question on this forum?

  • My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

    My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project.  After doing this I took selected clips and put those edited clips on the fce timeline.  When playing the video back in the fce timeline,I noticed
    1) the video wasn't playing back smoothly like the original content
    2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio.  I exported to quicktime just to see if that was consistent, it was.
    When I play the converted quicktime content independently of fce,  it plays normally (no sputtering of timecode, video and audio.  Need help to resolve the sputtering playback of converted video content in the fce timeline.  I've never experienced this before.  Any suggestions?

    When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly?  If not, go back and convert the original files again, using the intended Sequence settings as a guide.
    -DH

  • Audio Clicking and broken up when playing back from timeline

    Can anyone please give me some advice about a possible solution to a continuing audio problem I am having when using the Tascam Fireone with Final Cut Pro 5.1.4. (Fireone working well with Logic 7 on the same machine)
    The Symptoms are as follow:
    When playing back edited clips or music from the timeline there are constant ugly pops and clicks.
    Any audio or video and audio even with differing sample rates when played in the source monitor are unaffected and play perfectly.
    I have tried everything I know and am now at a total loss as to what to try next.
    Tascam's so called support ignore any communication from me about it, as do most people on this forum.
    Any suggestions welcome.
    Thank you

    I think it is a driver issue between Tascam and Apple Firewire connections
    It's all very frustrating as Tascam just do not respond to support questions well.
    Thanks for your comments, it's back to the drawing board with the Fireone and Final Cut Pro, a great shame because it's cheap and very good with Logic.

  • Audio Glitches on Timeline, but not when played in QT?

    I had a client send me his project on a harddrive.
    They exported a .mov file from FCP and it has no audio glitches when played with Quicktime.
    But if i drag that file to a timeline and watch it through my DSR-25 to a NTSC monitor, it has audio glitches in certain spots.
    Always at that spot though and if i watch the file in Quicktime, it plays fine.
    All audio was exported originally out of FCP using Quicktime Movie with 48khz, 16 bit stereo so nothing needed to be rendered.
    Seems like it has something to do with it going over via firewire through my DSR-25.
    Has anyone else had this problem.
    I can't make a Master DVCam tape for this master because of these audio glitches.
    Thanks for any help,
    Brian

    I read a post about a user having this same sort of issue.
    He said when he turns off his video layer, in my case just V1, the audio played fine.
    Same with mine.
    So it seems to be an issue with the video track playing with the audio track.
    If i export it and bring it back in, will it just create that same audio glitch?
    Guess i will have to try.
    Anyone have this issue or similiar?
    Thanks,
    Brian

Maybe you are looking for