Video transfer problems

I have recently received my new 5th gen ipod. However when I go under preferences and to my ipod configs, under the "video" section, all of the video options are gray and do not allow me to change any options for video. It also does not let me drag any videos to my ipod. What could be going on here?
It allows me to look and change options under all 5 of the other selections.(music, podcasts, photos, contacts, and calenders). So what could be going on with my video option?

The .MOV extension is simply manes the file is a generic QT movie. What is important is the format in which the audio and video was encoded. To be compatible with an iPod, it must have MPEG4 or H.264 video and AAC audio tracks. Further, there are specific restrictions on the combined average video plus audio data rate. H.264 cannot exceed 768 or thereabouts while MPEG4s have about three time as much headroom. In addition either file may be 320x240, but only the MPEG4 can likely use a 480x480 resolution and remain within it's data rate restriction.

Similar Messages

Video transfer problem from pc to ipad A1219

video transfer problem from pc to ipad A1219

ArinC
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPad " where it may get a more rapid response from your fellow users.
best luck
ÇÇÇ

N82 video transfer problem

I am unable to view the transferred videos(movies)from my PC to my new N82.Though the transfer takes place and the files are seen on the device in My Videos folder when connected to PC with USB.But once the USB gets removed and i try to view the same files they are not seen.
plz help...thanks in advance
Solved!
Go to Solution.

I've had this same problem ever since I bought my N82 in March. The video files are there when transferred via USB to the phone device but not visible or playable on the phone. I tried changing the file formats to mp4 just now as suggested and the file appeared in My Videos but when I try o play it it says 'Invalid File Format.' Any Suggestions?

Mac video transfer problems..

I've scrolled the forums but most people that are having my problem appear to be Windows users and also having little success by the looks of it. Therefore I wondered if maybe my problem was answered a little easier by Mac users. I have endless music video's/videos on disc and a few on the computer. I've managed to use the iTunes converter to get a couple on my iPod but only in video, not with sound. The sound is lost in the conversion because the converted copy iTunes also has no sound. I've looked at settings in iTunes and the iPod but it hasn't made a difference. Any suggestions welcome!

Nevermind..."handbrake" sorted it out.
thanks to the person who wrote of it!

How to rip DVD, convert video, transfer iPod music and make iPhone ringtone

Part 1. How to rip DVD to iPod/iPhone/Sansa/PSP/Zune and other MP4 and MP3 Players
Part 2. How to convert all video to MP4, AVI, FLV, 3GP, WMV, MOV, MPG, RM, RMVB, MKV, VOB…
Part 3. How to transfer music from iPod to computer, computer to iPod, iPod to iPod.
Part 4. How to make your own iPhone ringtone for free
Believe or not, to do the things above what you need is download Aiseesoft DVD Software Toolkit(http://www.aiseesoft.com/dvd-software-toolkit.html) and few clicks.
http://www.aiseesoft.com/images/guide/dvd-software-toolkit/dvd-software-toolkit.jpg
Part 1. How to rip DVD to iPod/iPhone/Sansa/PSP/Zune and other MP4 and MP3 Players.
Step 1. Click “DVD Ripper” on the main interface to run Aiseesoft DVD Ripper(http://www.aiseesoft.com/dvd-ripper.html).
http://www.aiseesoft.com/images/guide/converter-suite-new/dvd.jpg
Step 2. Open your DVD Drive and put your DVD in it, then click “Load DVD” and choose “Load DVD” to load your DVD into this best DVD ripper.
Step 3. Choose your output format from the “profile” drop-down list. This best DVD ripper provides you so many formats that out of your expectation, such as “iPod video MPEG 4 (*.mp4)”, “iPhone 3G MOV 640*480 (*.mov)” and so on.
After you choose your output format, you can adjust your output video’s settings, such as “Resolution”, “Frame Rate”, “Bitrate”, “Sample Rate” and so on.
Click “Start” now to begin your conversion and you will get your video soon.
To make your output movie more enjoyable you can do some editings to it through this best DVD ripper. You can choose a part of your movie to convert (trim), remove the black edges of your DVD movie (crop) and also adjust the effect (effect) and select subtitle and audio track.
Part 2. How to convert all video to MP4, AVI, FLV, 3GP, WMV, MOV, MPG, RM, RMVB, MKV, VOB…
Step 1. Click “Total Video Converter” on the main interface to run Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
http://www.aiseesoft.com/images/guide/converter-suite-new/video.jpg
Step 2. Click “Add File” to load the video you want to convert.
Step 3. Choose output format by clicking “profile” and customize your own output video by
clicking “settings” to adjust the Resolution, Frame Rate, Bitrate and so on.
Before you click “Start” to begin your conversion, you can do some editing works, such as pick up a part of your video to convert(trim), choose your own play region(crop) and put two or more files into one.(merge into one file).
OK, now you can begin your conversion
Part 3. How to transfer your songs and videos bewteen iPod and computer/iPod
First, Click “iPod Transfer” to run Aiseesoft iPod Transfer
http://www.aiseesoft.com/images/guide/dvd-software-toolkit/ipod-transfer.jpg
Click “Computer to iPod” button, it will allow you to transfer songs and videos from your computer to iPod easily.
Click “iPod to Computer” button, it will allow you to backup your songs and videos from iPod to your computer.
Click “iPod to iPod” button, it will allow you to transfer songs and videos from one iPod to another iPod dirrectly.
Part 4. How to make your own iPhone ringtone for free
Download Aiseesoft iPhone Ringtone Maker(http://www.aiseesoft.com/iphone-ringtone-maker.html)
http://www.aiseesoft.com/images/guide/iphone-suite/iphone-ringtone-maker.jpg
Step 1: Click “Browse” on the right side of "Input File" to import the file that you want to make ringtone from it.
Step 2: Play it and listen the music to find the segment that you want to use it as ringtone. Then drag and click the start & end slider to set your wanted segment, or type the start & end time in the corresponding text box directly to get the exact segment. You also can pre-listen the converted audio before generate.
Step 3: Click “Browse” on the right side of "Local Output Folder" to choose the output destination.
Step 4: Check "Export to iPhone" option, the converted ringtone will be load to your iPhone directly.
Step 5: After all the settings are finished, click “Generate” to begin making your own iPhone ringtone.
If you are a Mac user, I recommend you Aiseesoft DVD Software Toolkit for Mac(http://www.aiseesoft.com/dvd-software-toolkit-for-mac.html)
it has the same functions as the windows one. You can use it easy rip your DVD, convert your videos, transfer your iPod songs and videos bewteen iPod and your Mac and also make your own ringtone.
http://www.aiseesoft.com/images/guide/dvd-software-toolkit/dvd-software-toolkit-mac.jpg

That's Piracy... lol
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

File transfer problem

I have a 2009 intel iMAC running 10.6.8. Several months ago it developed a file transfer problem. When transferring files to an external server via ethernet cable, most of the time it will only let me transfer one file at a time whether is a small word document or a large video file that is several gigabytes. Even with transferring just one file, the elapsed time bar will not indicate the file has completely transferred. It stays open and appears as if it is still trying to transfer even though the file size transferred is equal to the size of the file. Plus the only way I can close the the transfer bar is to relaunch finder. Then when I go to the folder it was transferring it to, the entire file will be there.
Suggestions?

Have you tried restarting the external drive and the computer?

DVD Quality: Using Pinnacle Video Transfer and I-movie 08

I am using Pinnacle video transfer to upload old video - some directly from old camera tapes, some from 8mm video that has been transferred to VCR or DVD by a commercial service such as Costco. I am using the "Professional Quality" to burn my finished projects, but the quality is not as good as the original upload from the source. Sometimes it is better than others but I am unable to figure out why. Is there a way to use the creative resources for MAC and get good quality video? Thanks very much. Are the professional programs (such as "final cut") a lot better?

Dyann there seems to be a problem with Imovie08 in that it only uses single field processing effectively throwing away half of your horizontal quality. I am a relatively new Mac user and bought my macbook to do video editing, I am having the same problem when importing from a mini dv camera in that the quality when the dvd is produced to be quite honest is crap. Many people are complaining about htis and are asking if Imovie09 will have this fixed but no firm answers yet. Hope this helps

Pinnacle video transfer

I saw this cool little gadget called the pinnacle video transfer that transfers video to iPods from DVR's, movies, and even game consoles on Attack of the Show. They say it works with iPods so I was hoping it would work with my iPhone. I don't see why it wouldn't. Can anyone confirm or deny if this is iPhone compatible, or even opinions of anyone that owns one? Thanks.
Jared

Dyann there seems to be a problem with Imovie08 in that it only uses single field processing effectively throwing away half of your horizontal quality. I am a relatively new Mac user and bought my macbook to do video editing, I am having the same problem when importing from a mini dv camera in that the quality when the dvd is produced to be quite honest is crap. Many people are complaining about htis and are asking if Imovie09 will have this fixed but no firm answers yet. Hope this helps

IMOVIE08/IPHOTO08 TRANSFER PROBLEM QUESTION... HELP HELP HELP!!!

IMOVIE/IPHOTO TRANSFER PROBLEM QUESTION... HELP HELP HELP!!!
much like the email above, i am having trouble importing movies --all taken with my same nikon camera and uploaded to iphoto-- from iphoto08 to imovie08. i did a software update today and half the movies i wanted from iphoto, somehow, ended up on imovie. not the half i need to work with, by the way. just came back from christmas with the family. the first time my dad has seen my son. the first time my wife has seen my dad. lots of pictures. my dad wants copies. i got great ideas about making him a DVD... in imovie, i choose, "import movies", follow the steps, create a new event AND... no movie clips show up in my new event... BUT, when i click "mac HD" on my desktop and go the "imovie events", i see the movies is just supposedly imported to imovie as files and can watch them. doesn't help me much when trying to create a movie to send to my dad. no video is played in imovie. HELP HELP HELP!!! i went so far as to trash my 15 movies from iphoto because i thought perhaps the computer was seeing them as photos and not movies. right now my vacation movies are on my desktop. how can i get them to show up in imovie and start my project? HELP HELP HELP!!!

I think you have set your iPod to an option which everytime you connect it to itunes, it will delete all songs on it and replace it with songs currently in your library. What you need to do is click on the ipod on the sidebar, and on the bottem of the new page click the tick box that says "Manually manage music and video". That way you can delete old songs from your computer and they will stay on your ipod everytime you connect it. Hope that helps ^_^
Windows XP Pro

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

S Video Transfer Cable vs. Composite Video Transfer Cable???

I am double checking here after importing some footage. During review; I am not satisfied with the quality. Of course these are old and weren't stored well so I expect the actual footage to be deteriorating.
The thing that's bugging me is that the tracking seems fine on the T.V. but looks horribly off in iMovie during import and playback. Would the cable cause this?
I am wondering if I should purchase a $10 S-Video Transfer Cable and re-import the footage?
My little consumer digi-cam (Canon ZR40) only came with the RCA Composite type transfer cable.
Is the actual difference noticable to the human eye?
Thanks

"..During review; I am not satisfied with the quality.." ..iMovie doesn't display as sharply as a TV ..this is really a "cut'n'paste" editing program, not really a viewing program, so you won't really see the full quality till you export back to tape, or to a DVD, and view that on a good screen ..so don't worry needlessly.
"..the tracking seems fine on the T.V. but looks horribly off in iMovie.." ..A TV doesn't normally show the extreme edges of a picture; they're intentionally cut off to avoid showing any 'raggedness' around the edges ..this is known as 'overscan'.
What you may be seeing - which won't be visible once you've edited, exported back to tape or DVD and are viewing on a similar TV - is probably the overlap or 'handover' between the video heads on the original recorder, giving an extra few lines of 'garbage' at the top or bottom of the screen.
This is normal ..that's how VCRs work ..it's just that you usually don't see it, except, perhaps, on a plasma or other flat-screen TV which scans right to the edges (..i.e; has no 'overscan').
"..purchase a $10 S-Video Transfer Cable and re-import the footage.." ..It'll probably make no difference.
Edit some of what you've imported ..say three minutes' worth. Export that back to the Canon, then play that from the Canon into your TV. Compare that with the original which you imported into the Canon.
I expect you'll see no difference ..maybe the imported, edited and exported looks slightly better, if a 'timebase corrector' inside the Canon gave a more sharply synchronised capture onto tape than the simple playback from your original VCR (..it does happen..)

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
3. upgraded from 1.9 to 2.0 BIOS. still the same problem
4. reverted from 2.0 to 1.7 BIOS. the problem ended.
BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card. That was the last step (before chucking this mobo completely) in my attempts to fix the same problem. It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work. Would boot sometimes and at others gave a blue screen video error.
Flashing to bios 1.7 was the only thing that fixed it. Tried different memory, updating software, various combinations of drives, etc. For the record I tried bios 1.8, 1.9, 2.0, and 2.1. Not sure what about those updates causes problems but there definitely is something wrong.
Thanks.

Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie . ...Where'd it go ?

video transfer from computer
         Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie . ...Where'd it go ? sync automatically downloaded some - but was a bit prejudiced and selective with content mainly all edited by me in Moviemaker (windows 7, probably the reason)
         I use technology since neanderthals roamed the planet . ....don't quite understand all the nuances . .. .So, my all things "i" (apple/mac) guru has arranged a meeting,    and I'm impatient. I know some of my videos are in several formats, etc... and I don't quite understand the differences . ...to me, it's complicated, as Alec Baldwin would say.
        Unfortunately, I'm "late" to the game metaphoricaly ( windows vs apple/mac ). I have a couple ipods and actually endorse the ijet remote device (Co. from San Diego). I have pro tools and other hi tech gear in the pro keyboards/sequencing arena where I've been writing computer music since 80's and it's evolution.

The Apple video app is very limited in what it will play. If you have multiple video formats and if they will play on an iPad, then you likely need a 3rd party vidoe app. One such is BUZZPlayer which is available in the iTunes App Store on a Mac or PC or from the App Store app on an iOS device.
You transfer the videos to 3rd party video apps using iOS File Sharing.
http://support.apple.com/kb/ht4094

Video transfer problems

Similar Messages

Maybe you are looking for