Video Transition Effect

I'm trying to add video transition effect at an edit point but not able to add to both edit points, just the end of the first clip and not overlapping two clips. What is keeping me from adding the effect to both points? I've done so in the past. Thanks.

Welcome to the forums,
[It's a matter of handles|http://www.larryjordan.biz/articles/lj_handles.html].
G,

Similar Messages

Video transition effects

Hi,
Suddenly out of no where, when I click on two split video clips that are touching (on the same track), it no longer highlights the area to allow me to apply transitional effects... However, I can right click and it will give me "add cross dissolve".
I don't understand.. It's almost as if any edits after a certain point in the sequence will no longer allow me to select edit points for transitional effects-- But if I go back a few minutes on the time line, I can cut and add all the ones I want.. Is this a bug???
-patrick

Are you sure the clips are touching? Zoom into the timeline and make sure.
If they are, what happens when you just drag a transition from your transition effects bin and drop it on the cut point? Or what happens when you add a dissolve by right clicking on the cut point?
rh

Video transitions effect all layers

When I add certain video transitions to a track they seem to effect all the tracks beneath it. For instance, if I apply a checkerboard wipe to track 3 it will also do a checkerboard wipe on tracks 1 and 2 also...
Any thoughts?
Thanks in advance,
David.

Nope! Nothing selected underneath and it's not what should be happening. Will give you a bit more info...
The programme is a job opportunities slot:
On track one is a white matte.
On track two is our chromakeyed presenter.
On track three is a clip (resized to appx. 25% and rotated 90 degrees)which floats in the white space next to the presenter and provides an area to put up information about the job being discussed.
It is this resized clip that I have tried to introduce using the checkerboard wipe but when I apply it, it checkerboards all three tracks in from black. If I use a cross dissolve or some of the other transitions it works fine..?!
The other annoying thing is that it worked fine in an earlier version of the programme - could it be that this one particular sequence is corrupted somehow?
Have tried the same effect in other projects and it seems to be behaving itself...
Think I may have to pull in the boards that worked from the earlier version of the programme but it's annoying not knowing what's causing it.
Thanks for your replies,
David.

Video transition effect in FCS 7 needs clip cutting

Working with video transitions in FCS 7 and taking several clips from browser directly to timeline I have to adjust adjoining clips by cutting them to be able to connect them with video transition, dissolve effect. I get a warning that there is not enough space. After cutting off several frames on each side of the clip the effect works fine. If I use the viewer and then overwrite to timeline one clip after another there is no warning.
Is this normal or is it a bug?
Milan
PS The clips get to the Browser via Log and Transfer from Canon Vixia HF S11

It may be inexperience.
You need handles to allow for transitions:
http://multimedia.journalism.berkeley.edu/tutorials/finalcut/transitions-handles /

Video Transition Effect isn't working

It's probably something really basic, but, when I drag a transition to a point between two clips, it only shows over the right clip and when it's dropped by releasing the mouse, the transition pretty much disappears. It may still exist as a single frame transition, but that's all.
Any ideas?
Thanks!

Transitions need material from both clips not otherwise in the timeline. If all the media is in the timeline, no transition is possible.
Search this forum for "handles' hours of amusing reading!

Video Transition: Dissolve disabled

I was trying to use a video transitional effect: Dissolve, which is my favorite. When clicking a "Video Transitions" folder under "Effect," I see Dissolve is highlighted red while all other transitional effects are highlighted in blue. Anyway, I dragged Dissolve to Timeline to apply. But it is not working when I preview. So I was trying to create the same effect by creating a few keys of opacity. It is not working, either. When previewing, the film went on ignoring opacity key frames.... My pc is HP, OS is Vista, 32-bit, 3GB, and Premiere Pro. Any advice or suggestions?

Following Jeff's suggestions, read up on "Handles."
Now, if you *need* to do a Transition, in an area, as Jeff describes in his last paragraph, Dip to Black is the only choice - no Dither Dissolves, no Page Curl, no Cross-Dissolves. Again, the "Handles" info will give you all of the detail that you need, including the do's, the don'ts and the "what will happen if I try it." Premiere will usually even throw an error message, that is explained in detail in the "Handles" section of the manual, though without that reading, you might not be able to make much sense of what it means, but it boils down to "what Jeff said."
Hunt
PS this is an often misunderstood, or overlooked aspect of NLE work. With film, it was a lot easier to grasp, 'cause you could actually see the frames on your A-roll and your B-roll and where the black leader was spliced to each. With digital, while it's MUCH easier to do, it's not as visually graphic and people just miss the concept. Once you read about it and think about it, it'll become patently clear.

I'm having a problem in FCP7 with all video transitions. Every transition has a rolling flicker throughout the effect. What is causing this?

I recently upgraded to FCP7 from FCP6. I am now having an issue in playback with all video transitions. When I add a transition to my video it does not consistently play smoothly. I now appears to have an old "film" like flicker rolling through the effect. Our video was shot on a dslr and brought into FCP with compressor as a prores 422 file. We use magic bullet for our coloring effects which are in place on this video. When I was working on the project in FCP6 I did not have this problem. When the project was complete we upgraded to FCP7. The client has now come back to us wanting additional footage. So I opened the old project up into FCP7 and checked yes to all format updates to meet with FCP7 guidelines. So far this is the only problem I've encountered. Any help would be greatly appreciated.

Hello!
For me it looks like conflict with field order (upper, lower - interlaced).
Please, check Your sequence settings, maybe it should be set to "field order NONE" if Your source is progressive.
Next thing You could check:
in Your timeline with bad transitions look into "Effecs tab" - maybe FCP 7 added "shift field filter +/-1" after opening FCP 6 project.
In general - try to keep sequence settings same as source settings.

Can't find zoom effect under effects video transition.

I'm using V6.0.5 for Mac. I wanted to use zoom effect on a movie clip but can't find the zoom effect under Effects > video transition tab. I dunno what's wrong.

This was corrected in I believe CC 2014.
It wasn't really 'corrected' as much as the Windows version was intentionally hobbled. (Blasphemy!)

Video tutorial: Fire reveal transition effect

See this video tutorial about the fire reveal transition effect: http://youtu.be/3yax9i0ZSso

Start here to learn After Effects:
http://adobe.ly/AE_basics
Information on track mattes is here:
http://helpx.adobe.com/after-effects/using/alpha-channels-masks-mattes.html#track_mattes_a nd_traveling_mattes

Looking for a list of Video Transitions(not effects)

Hello, I'd really like to find a list of Transitions similar to this list so that I can print and study it. Make note, etc. There doesn't seem to be an equivalent. While this one implies that it deals with Transitions it really only has the transitions effects pieces. There are some 50+ actual transitions that are available in all the folders. I'd think there would be some references to these in the help system, but right now I am unable to find them.
Thanks!
Rich
http://help.adobe.com/en_US/premierepro/cs/using/WS1E7C690B-2342-43c3-9253-2BAAFF4168EF.ht ml#WS1c9bc5c2e465a58a91cf0b1038518aef7-7ddba

Hi Ann Thanks for that. I did come across that list too. There is a wiki site started also that has bugn to show how each works too. That's what I'd love to create for the entire list with a thumbnail as a visual When I have time!
http://premierepro.wikia.com/wiki/Transitions

Problem with sound, and problem with video transitions

For some reason my audio isnt locked with my video anymore so when I move a clip the audio doesnt follow does anyone know how to fix that?
Also, when I put in video transitions instead of just switching from the first clip to the second clip it flashes an image from other pieces of footage while transitioning and I need to figure out how to fix that too.
Anyone know how to fix these?
thanks

Thanks i got the audio problem fixed.
When I open up final cut it says some of the media has been disconnected but it then says I can't reconnect it or something like that, I don't know if that effects the transitions. I split up a lot of footage and rearranged it and for one of the places where it flashes a clip it shows one of the pieces of footage that I had deleted because it had a glitch and the other places I noticed it it had random clips from throughout the project, like a flash of an interview that happens way later in the film. So it is random clips that are in the film and even clips that I deleted.

Missing video transitions in Premiere CS6

Greeting everyone,
It seems that I am missing some 3D motion transition effects in Premiere CS6. I only have Cube Spin and Flip Over, but I know (and have seen) more transitions on other people's installations. I can't seem to find anywhere to download them either. I assumed they came with base CS6, but I don't have them. Where can I download some more? Or how do I restore the ones that I should have?

Go half way in the link to
Deprecated video transitions
Adobe Premiere Pro Help | New features summary

N97 Transition Effect Problem

As you all know that the N97 user interface is not attractive due to the lack of the real transition effects, my 5800 have a nice iphone like transitions, but for the N97 the transition effect is very simple! Only some sliding menus and that’s it!! I wonder where is the screen orientation swivel effect we've seen in early N97 prototype videos? However, once I enable the transition effects on my N97 it will start to become unstable with crashes and it will affect some other programs like the photo gallery (will hang sometimes and gives low res pictures or just the whole program will go to the background while using the zoom button!) and the Web browser will start to display mid and large websites without images!!! I tried to reload the page so many times but only the text appears without any image! After trying so many times at last the page loaded successfully with all images but my happiness didn't last as I discovered that the phone turned off the transition effects automatically! When I went to the themes menu to check, it was turned on but actually it’s not working as the phone disabled it in order to load the web page! It happened to my three times since I updated my firmware last week (V 11)! I think this is because of the lack of enough RAM, I removed all the online widgets from the home screen (like facebook and accuweather) and just used contacts, programs, calendar, email, and music shortcuts which gave me additional 5 MB of free RAM and the phone felt more stable but still can’t handle the transition effects and proper Web pages display simultaneously! My 5800 handles web pages better and display all images even if the transition effects are turned on! I hope Nokia will fix these issues and gives us an option to disable the Widgets and Kinetic scrolling (Make the UI just like the 5800) in order to have more free RAM and enjoy full transition effects and proper Web Browsing with better stability just like the 5800.
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM

Any updates on the effects? I wrote to Nokia support, I'm in Russia, they replied.
I have illustrated my question with the links to youtube where it is clearly visible how the UI rotates and other animation effects when opening the widgets.
My translation of the official reply:
"In firmware version 11 those effects do work! Try to resent the phone to the factory settings by typing: *#7780#, standard lock code is - 12345 or try to format the phone memory. Do your data and contacts back up using PC Suite . enter *#7370# (formats phone memory), enter the code 12345 the phone will resent. Then restore your back up."
Message Edited by takemori on 09-Jul-2009 04:19 PM

Video Transition Error Help...

Hi.
The clip what i work is mont format, i have fixed in motion.
I have rendel that back in final cut and now i whant to but middle in two clip addictive dissovelve effect but i get X in the video transition
like this http://www.insertxox.com/finalcutproplem.tiff
Pleas help...

insertxox wrote:
Up..
I'll ask once nicely: Please do not do that UP thing again, okay? It's considered supremely rude around here. We are all volunteers here and we get to questions as we wake up and log in and there are usually far more urgent issues that need our immediate scrutiny and laser-like attention. Most of us are in the States, too, several hours away from you.
bogiesan

Can't change default video transition duration in PRE7 project

I couldn't find the solution for the following problem. In one of my Premiere Elements 7 projects, suddenly the video transition default duration changed from 30 frames to 3 frames. After inserting this 3 frames long transition, I can adjust it (expanding or shrinking) in the timeline, change the duration via the "Edit Transition" dialog box, however there is no way I can change the default duration. I can change the duration value in the Edit > Preferences > General dialog box but it has no effect on the actual duration. This is true for all transitions. On the other hand, the other projects (I checked a few), also a new project work properly: In them, the default duration is 30 frames, and I can set it in the Properties dialog box to any other value. So, this problem appears to be project specific. I hope somebody can help me, so I do not have to redo this particular project. Thanks in advance, Laci.

Steve, This is the same camcorder I have been using the last five years. Other projects from footages taken the same time are working fine. Also, I just created a 'new' (test) project from the same clips (many clips, about 25 minutes, several bmp pictures in it) - and it also works fine! It must be some very peculiar feature of that particular project, and I do not think it is worth to spend more time with it. I just thought that it might have happened with somebody else and there is a known solution. I consider this issue closed, thanks for the help. Laci. (PS: I also have an insignificant problem: I uploaded my picture to my preferences page here a couple of months ago, set it to be displayed but it does not appear. Who could help with this? Thanks.)

Video Transition Effect

Similar Messages

Maybe you are looking for