Video Transition Problem

I've been using FCE for awhile and I've just recently run into a problem with my video transitions between clips. For some reason my fade in fade out dissolve transition will only go to the second clip rather than bridging itself between both the previous clip and the next. I've got the cursor marked between the two clips and I'm having zero success in figuring this out. Can anyone help?
Thank you!

I do. There's plenty of footage before and after the in and out points. I tried dragging the duration of the transition over to the previous clip and it won't drag. I also tried to increase the duration to the right onto the clip that the partial transition was on to see if I can change it and it wouldn't budge. So there's something going on completely with the video transitions, and unfortunately I'm clueless.

Similar Messages

CS6 Video transitions problem

I am try to add cross fade transitions to a video in CS6. when i drag the any transition to the video, to the end of a clip or the beginning, i do not see the icon to edit the time of the transitions. I have tried to drag a transition between two videos and i do not see the 'side ways triangle shaped" icon on the video.
Please help - thanks

The Premiere forum (or whatever product you are talking about) is your friend.
Mylenium

Problem with sound, and problem with video transitions

For some reason my audio isnt locked with my video anymore so when I move a clip the audio doesnt follow does anyone know how to fix that?
Also, when I put in video transitions instead of just switching from the first clip to the second clip it flashes an image from other pieces of footage while transitioning and I need to figure out how to fix that too.
Anyone know how to fix these?
thanks

Thanks i got the audio problem fixed.
When I open up final cut it says some of the media has been disconnected but it then says I can't reconnect it or something like that, I don't know if that effects the transitions. I split up a lot of footage and rearranged it and for one of the places where it flashes a clip it shows one of the pieces of footage that I had deleted because it had a glitch and the other places I noticed it it had random clips from throughout the project, like a flash of an interview that happens way later in the film. So it is random clips that are in the film and even clips that I deleted.

I'm having a problem in FCP7 with all video transitions. Every transition has a rolling flicker throughout the effect. What is causing this?

I recently upgraded to FCP7 from FCP6. I am now having an issue in playback with all video transitions. When I add a transition to my video it does not consistently play smoothly. I now appears to have an old "film" like flicker rolling through the effect. Our video was shot on a dslr and brought into FCP with compressor as a prores 422 file. We use magic bullet for our coloring effects which are in place on this video. When I was working on the project in FCP6 I did not have this problem. When the project was complete we upgraded to FCP7. The client has now come back to us wanting additional footage. So I opened the old project up into FCP7 and checked yes to all format updates to meet with FCP7 guidelines. So far this is the only problem I've encountered. Any help would be greatly appreciated.

Hello!
For me it looks like conflict with field order (upper, lower - interlaced).
Please, check Your sequence settings, maybe it should be set to "field order NONE" if Your source is progressive.
Next thing You could check:
in Your timeline with bad transitions look into "Effecs tab" - maybe FCP 7 added "shift field filter +/-1" after opening FCP 6 project.
In general - try to keep sequence settings same as source settings.

Problem with a video transition

I'm new to FCE and just starting to make titles. I made a simple title in Title 3D, saved the clip back to the Browser, and did an Insert Edit to the beginning of the sequence. I then tried to drag a video transition onto the edit point. It took the transition without the "Insufficient content for edit" warning, which I understand having learned about handles. The first video clip is very short, so I want the transition to be entirely within the title clip. What I wind up with is a one frame transition. I double clicked the transition to open it in the Viewer. Trying to increase the duration of the dissolve to 1 sec. doesn't work. It reverts back to 1 frame. I tried moving the Out point back 30 frames but this only shortened the clip by that amount. What am I doing wrong?
Mac OS X (10.4.7)
G4 Dual 867 FCE 3.5 HD 300 GB internal RAID

The Out point of the incoming clip doesn't matter, it's the In point of the clip that matters. If you understand about handles you understand that you need additional media outside and in front of the marked In point of the incoming shot to make the transition. For a one second transition you need at least 15 frames.
http://www.fcpbook.com/Effects1.html

Problems insterting video transitions

Hi all,
I'm luke and new to final cut express. Had a prob today. I couldn't add any video transitions to a clip in the time line. Anyone have an idea as to why this might be happening. I have been able to use this feature with clips in the past.
Hope someone can help.
Cheers luke

http://www.fcpbook.com/Effects1.html

Problem with video transitions folder locked

When I click on the video transitions (in effects tab) and try to drag a video transition like a dissolve into the timeline a small x appears and it wont allow me to add a transition. I noticed the folder symbol next to the video transitions has a lock symbol on it. How do I unlock the video transitions so I can use them again? I've tried clicking on the folder but nothing happens to the lock.

The x you're seeing doesn't mean the folder is locked; it means (usually) that there aren't enough handles on the media to sustain the transition. "Handles" are the frames BEFORE an IN point and AFTER an OUT point that get added to your clip whenever you add a transition. If there aren't enough frames, the transition cannot be applied properly. Look up HANDLES in the manual for more details.
-DH

Can't change default video transition duration in PRE7 project

I couldn't find the solution for the following problem. In one of my Premiere Elements 7 projects, suddenly the video transition default duration changed from 30 frames to 3 frames. After inserting this 3 frames long transition, I can adjust it (expanding or shrinking) in the timeline, change the duration via the "Edit Transition" dialog box, however there is no way I can change the default duration. I can change the duration value in the Edit > Preferences > General dialog box but it has no effect on the actual duration. This is true for all transitions. On the other hand, the other projects (I checked a few), also a new project work properly: In them, the default duration is 30 frames, and I can set it in the Properties dialog box to any other value. So, this problem appears to be project specific. I hope somebody can help me, so I do not have to redo this particular project. Thanks in advance, Laci.

Steve, This is the same camcorder I have been using the last five years. Other projects from footages taken the same time are working fine. Also, I just created a 'new' (test) project from the same clips (many clips, about 25 minutes, several bmp pictures in it) - and it also works fine! It must be some very peculiar feature of that particular project, and I do not think it is worth to spend more time with it. I just thought that it might have happened with somebody else and there is a known solution. I consider this issue closed, thanks for the help. Laci. (PS: I also have an insignificant problem: I uploaded my picture to my preferences page here a couple of months ago, set it to be displayed but it does not appear. Who could help with this? Thanks.)

Video transition isn't smooth

The quicktime>zoom, video transition in FCP, is not smooth when used on image file. Is there any way to fix this.

Its ok. I have worked out a way around the problem.
Thanks anyway

When importing Abode premiere footage with video transitions they get wipped out :-(

Afternoon from York UK, (USING LATEST VERSIONS OF ALL SOFTWARE)
Ok here's today's stress.... I build i video clip with Video transitions, dissolve dip to white to be specific. When i imported the project into After effects all transitions are lost :-( I'm so very confused.
To help here is a screen shot showing the transitions effects exist in the layers but on ram preview and export to mpeg no video transitions show. It is as if i added no transition effects between the clips!
http://i216.photobucket.com/albums/cc53/zymurgy_bucket/lost-video-transitions_zps254d346c. jpg
p.s. Really wanted above link to open in separate window but Ive had enough today of battling with CMS's
Thanks in advance,
David

Thanks Rick,
But I'm such a noob at Ae i've little idea on how to go about "Dynamically linked AE..." I appreciate now Ae is a technical tool which is going to take time to master which is difficult when I had yesterday to send the completed video to the client. Big problems for me are getting generated when I try to import Pr with Ae. Case in point is my Ae created animation being so much bigger than my imported video clip creating this effect: http://i216.photobucket.com/albums/cc53/zymurgy_bucket/misfit-video-clip-langleys-glitch_z pseec728d8.jpg
Spent all day trying to fix this but no joy, I have today to fix this, wish me luck ;-)

Adding video transitions using Multicam in Premiere CC not working

Just tried to a video transition to a Multicam timeline between a camera switch and it does add the transition in the timeline but only plays back as a cut as if no transition was applied. Also, using the shortcut CTRL D doesn't add the transition but does it show up in the history that it applied a transition.
I used a Dissolve transition and it shows the video dissolving between the 2 video source in the transition Effects Control window, just doesn't work in the timeline when playing it back. Rendering the timeline doesn't work either, still a cut transition.
Actually, just tried the CTRL D shortcut and it is now working.
Now the transition shows up when going to the Export menu and looking at the video in the Preview window and when exported the dissolve is there so the only problem is that the video transitions can't be seen when playing from the timeline.
Decided to close down Premiere, restart it and reload the project and now the transition works in the timeline.
Actually, here what happens. You can't see transitions when the Program monitor is in Multicam mode, you need to switch is back to Composite mode then the transition will preview when playing from the timeline. Now I just checked and you can scrub through the transition and see it when the Program monitor is in the Multicam mode.

scroll down the page to
Cross-platform support for video effects and transitions
Adobe Premiere Pro Help | New features summary

Mac-compatible plug-in for feathered-wipe video transitions?

Does anyone know of a Mac-compatible alternative for SpiceMaster for creating feathered wipe video transitions? I've just been handed off a job (let's just say the company who started it is "no longer in the picture") and all they used feathered wipe via the SpiceMaster plug-in about 100-150 times (in a 15 minute video — sigh). Anyways, I can't change the visual direction of the project, I just have to clean up the mess. We're Mac-only and the SpiceMaster plug-in isn't available on the Mac.
While one option is to use a liner wipe Video Effect (which allows for the feather), because of the amount of transitions in this job, that's not only a major pain in the arse in itself, but having to move clips in alternating tracks and overlap the footage, etc. becomes a huge headache when they decide to change the edit (as, all of a sudden, the alternating of the clips to different tracks goes all out of wack).
Anyway, I'm hoping someone could suggest a Video Transition plug-in that would allow me to do feathered wipes. It'd mean the difference between a quick replacing of the SpiceMaster transition with whatever plug-in I could use vs. a nightmare of a project using the linear wipe Video Effect.
Any suggestions would be most appreciated!!!
Kristin.

Thanks for the reply. I've tried using the gradient wipe, but was unsuccessful in attaining the desired effect. Here's a quick screencap to show what I'm seeing:
The problem is, this results in a very narrow wipe. I mean, it's no longer a fine line between image1 and image2, there is some feather, but I really need to feather it out. The gradient I created is the same dimensions as the sequence I'm working in, and is a gradient from 100% black on the left side to pure white on the right, with a nice gradient in between. But, when I use this, it's almost like the source gradient is squished in (on the width) resulting in a very narrow feathered wipe.
Below is an example of the rendered video as it was when using SpiceMaster to create the feathered wipe. The first image is the image directly before the wipe starts, the second image the image directly after the end of the wipe, and the third image is a capture mid-wipe. As you can see, there is a very wide feather during the transition as opposed to what is seen in the screen capture above.
Am I doing something wrong when creating my custom gradient? It seems like, since my source file is a nice, wide gradient, it should result in a wide feather, but for some reason it seems to squish down into a narrow feather?
Any suggestions?
Regards,
Kristin.

Less video transition on premiere pro cc than premiere cs6

hello,
i noticed that there are less video transition on premiere pro cc than premiere cs6...
what's the reason? is there any possibility to import video transition to the pro cc?
many thanks,
ofer

cc_merchant wrote:
It is not hostile, it is drawing attention to the costly handcuffs of Adobe.
pə-ˈtā-(ˌ)tō, pə-ˈtä-(ˌ)tō, ˈardɑpəl
The use of terminology like "handcuffs," "theft-rates," "bondage," "greed" strikes me as hostile. Courtesy Webster online: "a: of or relating to an enemy; b: marked by malevolence: having or showing unfriendly feelings; c: openly opposed or resisting."
I'm a bit stumped by the link you provide. I have not posted to that thread, and the quote you cite is instead from this very thread. Post 12, to be precise. Proceeding on the assumption that the link was simply a mistake on your part but the quote was what you intended to paste, I'd say "the easy way out" would have been to do nothing: let users continue to struggle with the problems caused by the disparity in effects and transitions across platforms. Instead, we opted to address the issue--in the manner we deemed best for the majority of our customers given the realities of deadlines, finite resources, and competing priorities. As it happens, I was directly involved in these decisions. In light of the small number of complaints I've seen in the 7 months since the release of CC2014, I'm comfortable with the choices we made.
But more to the point in light of the point you were attempting to make, I'm utterly baffled at how you think my statement substantiates your hyperbolic assertion that the CC releases of Premiere Pro are untested.
And now back to Oferez307's previously scheduled thread...

Video transition on Adjustment Layer causing errors

I have video transitions (native, not plug-ins) on an adjustment layer without any effects. When playing, the video freezes on the last frame before the transition and then continues playing after the end of the transition. The transition does nothing but hold that frame. Also, if I try to render the work area or export, I get the "Error compiling movie: Unknown error". If I remove the transitions, things work ok.
Starting a New Project and importing the old one did nothing to fix the problem.
I've got plenty of RAM and HD space, please help.

Then...why are you using one. Just apply the transitions directly to the clips.
I did this to discover why another project was producing the "unknown error" when rendering and exporting. I kept everything clean changing one variable at a time on a new project: clip sources, resolutions, transitions, effects, adjustment layer, etc.
If rendering the sequence works, then that is the appropriate solution. Do you have a red line above the timeline indicating that you need to render? Or do you need to set the opacity at 99% - AND - then render to make it work.
Simply changing the opacity to 99% worked, no need to render.
Just out of curiosity, why are you putting transitions on an Adjustment Layer? I can't think of a reason, but then again, I use transitions between nested sequences a lot. Maybe it is in place of that?
An effect in an adjustment layer is jarring if its transition does not match one applied between clips.

Error occurs when dragging and dropping a Video Transition

Hi there.
This is my first post here, as I have only recently upgraded to Premiere Pro CS5 from a very old version. I am running into a big problem with video transitions. Whenever I try to drag and drop a transition onto my timeline, Premiere crashes and says "Sorry, a serious error has occurred that requires Adobe Premiere to shut down..." Then the screen just hangs there and I need to do a Ctrl+Alt+Del to close the program. Please note that crossfades work with no issues whatsoever, and I have not encountered any other errors. Any ideas?
Here are some of the specs of my system:
CPU: Intel Core i7 950 @ 3.07 GHz
Video Card: NVIDIA GeForce GTX 470
OS: Windows 7 64-bit
RAM: 12 GB
I have 4 drives with the programs and files allocated per the suggestions in this forum.
Thanks,
Dave

Here would be my shotgun approach to your issue: Try adding effects on different footage. If no crash, the footage may be corrupt.
Try a new project with the same footage. If no crash, the project may be corrupt.
If above actions still produce a crash, trash prefs. Prefs may be corrupt.
You also may have bad RAM. Run a RAM-test app.
Still crashing? Re-install the application. The app may be damaged.
Sorry I don't have a firm answer, but you may need to seek and destroy, using process of elimination.

Video Transition Problem

Similar Messages

Maybe you are looking for