Video Viewing Quality on 5G

I realize that this is an LCD screen and black moving images are not replicated very well on LCD screens in general....
I have viewed a few vids using the recommended settings in Videora and DVD decriptor...just wondering if there is a way to improve the black viewing quality....?
Finally....how long should my 60G 5G take to charge when hooking it up to my work computer via USB. I am not using Itunes at work...or trying to play music...just hooking it up for charging purposes...

Nope ... Just that. I does not support anything more than what's stated in the tech specs

Similar Messages

LTE online video viewing vs. wifi online video viewing with ios7

after switching to ios 7 when i use LTE to watch online video the quality is very bad.(reception was good)
but if i use wifi the quality becomes what it suppose to be.

Thank you for your help! Sorry my message may misleaded...
I'm planning to use Rogers in Ont, Canada, I guess 5GB per month is enough for my mom in the beginning, and LTE is faster than the lower cost broadband service that offer by Rogers, so both idea should work, but I'm still cannot make any decision because of the iOS system on HD video viewing and FaceTime connection:
1) May I ask is there any diffenent to watch online video on iPad between wifi connection and cellular connection? Is it able to watch HD quality online video if using SIM card connected to internet?
Because I remember that the video quality is much poor if I use SIM card to connect internet long long time ago, the quality was automatically compressed when watching online video with 3G mode, but it's long time ago, not sure now.
2) May I also ask if I can use FaceTime with SIM card connection as well (LTE)?

How do I get my video viewer back on iPhone 3Gs 32 GB?

After the last iOS over the air update, my video viewer disappeared from my iPhone 3GS 32 GB. Nothing has replaced it, and I have videos from iTunes on my phone that I can't view. I went to iTunes help for guidance on what to do and there were no answers. I downloaded the user guide, no answers there. Help please. I would like to be able to view the videos that I own through iTunes.

i had a problem simular after doing an update on itunes, I re-set=up the itunes according to my os and its working fine

Inspection setup in view quality management update in material master

Hi all,
We are using BAPI_MATERIAL_SAVEDATA for our material master updation.
Here one of the change in the program is to update the inspection setup in the view quality management.
Can anybody tell in which stucture of the bapi BAPI_MATERIAL_SAVEDATA i can pass the values of the inspection set up fields.If not is there any other bapi through which can be done?
Thanks in advance.
regards
Nazmul

Hi,
To deactivate the Inspection Types for materials, you can use transaction QA08.
Here use tab "Deactivate insp. type" and specify the inspection type which you want to dactivate.

TV Anywhere poor video capture quality

I have a Celeron 1.7, 20 and 60 gig hd at 7200 rpm, 512M of ram. My capture is of very poor quality. I have used the MSI software and also Virtual Dub. Still poor video capture quality. Anyone tell me what I can do or how to do this right?
geo-ela

If you use a compressing codec in real time, you need lotsa CPU.
Try using a lossless codec such as Huffyuv (you'll need lotsa disk) for the real time capture and then compress afterwards.

Cache problem with "videos" viewed by thumbnail ?

Hello,
When I add video clips to my iTunes library, I have to crite the name of the author, the album... but sometimes display in the video view seems not to refresh : the clip are still listed without albums. I added clips 4 days ago, it refreshed immediately. I added clips three days ago, it still has not refreshed. I added clips two days ago, it took one day to refresh.
I tried changing view, changing album name, nothing work.

This is due to a bug in Flash Player 9.0.115.0, released on
12/3/07.
Techsmith, the company that produces Camtasia, reported the
problem to Adobe a few months ago, but Adobe has not released an
update for it. Adobe suggested downgrading to an older version of
Flash Player, but older versions of Flash Player have security
vulnerabilities that could result in your computer being attacked.
Incidentally, Player 9.0.115.0 is classified as a "critical update"
by Adobe.
Techsmith has released a patcher to fix affected Camtasia
videos, but the fix must be applied to the files on the server (all
of the Camtasia files) and can't be used by viewers. The problem
with Player 9.0.115.0 affects more than just Camtasia videos, of
course.
Until a newer version of Flash Player is released, you
probably just need to live with it unless you're willing to risk
the security holes in older Player versions. We're coming up on
three months since Player 9.0.115.0 was released. Given the long
delay in fixing the problem, and since Techsmith claims that Adobe
has made fixing the problem a high priority, it's possible Adobe's
engineers can't find a fix. Only time will tell.
For more information, search this forum for "Flash Player
& Camtasia Studio", "Player 9.0.115.0 MP3 issues", and "flash
player audio chirps and video delays". For confirmation of the
security flaws, search the web for "apsb07-20".

ITunes hang or kernal panic when minimizing "video viewer" pane

Does anyone else have this happen?
When playing a video in iTunes in the minimized view (small pane in lower left), if the button to hide the pane (which says "Show or hide item artwork or video viewer." if hovered over) is clicked, the pane begins to slide down, stops part way and hangs for an irregular amount of time, sometimes eventually completing, and sometimes resulting in a Kernel Panic.
This has happened for as long as I can remember, through various OS and iTunes updates.
I try to avoid using the button at all, and if I need to minimize it I generally try to select a song first (to switch the pane to showing album art) so I can minimize it safely.
If anyone has experienced this and/or solved it, I would love to hear about it.

YES!!! I have the exact same issue. Minimizing iTunes Video Viewer pane causes two replicable issues:
1) system slows to a near halt and then resumes normal activity when opening or closing the pane, and
2) kernel panic.
Looking at my logs now I find a different entry for each issue. When the computer crashes (i.e. kernel panic), the /Library/Logs/panic.log reads:
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x41ec3000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x328b8000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x3d917000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x3d93b000
dependency: com.apple.NVDAResman(4.1.8)@0x3d951000
Exception state (sv=0x4@
When the computer grinds to a halt but doesn't crash, the system log reports
kernel[0]: Graphics chip error! Restarted. <note: message repeats 8 times in the log!>
My guess is either a video codec is screwing everything up or the graphics card has gone sour. I tried eliminating the latest Divx and 3Vix codecs but the issue continues. I have installed some other codec libraries (ffmpeg and others), I am going to weed out as many as I can to try to eliminate the issue. Otherwise, it's off to AppleCare for a new graphics card.

Possible to adjust video camera quality settings?

I realize this is a shot in the dark, but is there any way to adjust the video camera quality settings on a 5th-gen nano? I'm wondering if the poor quality of the video is a result of the hardware or the built-in compression settings.

Hello Matt,
is there any way to adjust the video camera quality settings on a 5th-gen nano?
No. What you see is what you get.
Here are the specs for captured video on your nano.
H.264 VGA video, 640 by 480 pixels, up to 30 frames per second with AAC audio
Not exactly top notch, but still decently quality for a decent price. It's more than likely due to both reasons. This may improve with future generations.
B-rock

Photo Album app and Video viewing crashes the whole phone

Hi.
Not sure whether there is already another forum for this?
I am running android 4.3.
I have found that when I go into my photo album and scroll right the way down to the bottom of the page, the pictures stop showing a thumbnail and instead all I am shown are blacked out squares. When I then scroll to the top of the page the thumbnails that were previously there then turn black too. This then has the effect of crashing the whole phone. What I mean by this is that it becomes unresponsive, the back and home buttons do not work and I am then shown a barrage of "Album is not working" or "Google+ is not working" or "system is not working" messages..
This is also the case when I am attempting to view videos. The phone will play some videos but then all of a sudden it will begin to become unresponsive in the same way as I have mentioned before.
When the phone has become unresponsive, the screen times out and I am unable to access my phone again for a good few minutes. When I can eventually access the phone, I have found the same sort of messages and unresponsiveness will occur again when I enter these apps or try to view videos through the movies app or another video viewing app and I am forced to restart the phone.
The issue with album app occurs every time I try to access the photos at the very bottom of the page. The issue with the videos appears to be more temperamental and will occur every so often and through either the movies app or when viewing videos through alternate sources such as facebook.
I have only recently bought the Z1 and I have to say I am incredibly disappointed by the device so far!
Can anyone offer any sort of guidance or tips on what I should do?
Thanks!
Gurpal

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Sounds like there could be a problem with the indexation of your media files. So I suggest that you try to clear data for the media storage application.
Settings > App's > All > Media storage > Clear data.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Two questions: how do Skype and iChat compare for group video? quality, reliability, cost, etc are important. 2) Is my MobileMe ID what I need to use in the window in making an iChat buddy? It only says AIM above the window, online tutorial differs.

Two questions: 1) How do Skype and iChat compare for group video? Quality, reliability, cost, etc are important. 2) Is my MobileMe ID what I need to input in the window in making an iChat buddy? It only says AIM above the window, online tutorial differs, saying MobileMe, AIM, GoogleTalk (Jabber) all work. Thnx

Hi,
IChat uses better Video Compression than Skype does.
On a top flight Mac you can send a 640 X 480 pixel frame up to 30 frames a sec.
Skype can't match this.
iChat in Video is Peer to Peer. (you can actually Log out of the Buddy list)
Skype seems to borrow something from everyone's bandwidth to make connections.
What do you mean by Business account Tracking ?
iChat Adds (or can add) the First Name, Last Name of your Buddies and create an Address Book Entry
Whether you mark those cards connected with a company is up to you.
(I have heard of issues with earlier version of iChat and the Address Book that "saw" the Company Name as the part of the Name and linking several Screen Names to the one name
Audio on a Mac using Skype tend to be the same as the streaming needs are less.
However you have to rely on any PCs audio abilities from PCs which may not be to the same standard.
Mac to PCs in iChat and AIM can be difficult though. (It should work but it rarely as simple as Plug and go)
Skype may suit your needs better on ocassions.
9:11 PM Thursday; May 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

FLASH VIDEO LOSES QUALITY WHEN "WMODE" SET TO TRANSPARENT

I have a flash video beside a roll out menu. When I set the
"wmode" to transparent the video loses quality. Any help would be
appreciated. Thanks.

This is a multi-part message in MIME format.
--------------010106060209070007020804
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
actually, i can see in that code that you do still have wmode
transparent stuff in there. if you look just a little before
the ending
script tag, you'll see some. and then it's also in one of the
parameter
tags. in fact, you have the wmode=transparent parameter tag,
but not the
one that the instruction i gave you said to put in! actually,
it doesn't
look like you followed the instructions i gave you at all! at
least not
completely.
i think your best bet might be to just delete the video from
the page
(your code is too messed up for me to figure it out, sorry)
and
re-insert it, then follow the instructions on the link i gave
you. but
you need to do EVERYTHING it says to do, all the way until it
says *"2.
Hiding the <select> element:"
* if you start fresh and follow those instructions precisely,
i think it
will work!
just started wrote:
> courtney (n h c) wrote:
> quick question: when you did the stuff in the link i
gave you, did you
> remember to take out any wmode/transparent stuff that
you already put in
> there?
>
> Yes I did take out the wmode/transparent.
>
> This is the code. Thanks.
>
> <script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=8,0,0,0','width','550','height','367','id','FLVPlayer','src','FLVPlayer_
>
Progressive','flashvars','&MM_ComponentVersion=1&skinName=Clear_Skin_3&streamNam
>
e=videos/2007_fishing_video&autoPlay=true&autoRewind=true','quality','high','sca
>
le','noscale','name','FLVPlayer','salign','lt','pluginspage','
http://www.macrome
>
dia.com/go/getflashplayer','movie','FLVPlayer_Progressive','wmode','transparent'
> ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=8,0,0,0" width="550" height="367"
id="FLVPlayer">
> <param name="movie" value="FLVPlayer_Progressive.swf"
/>
> <param name="salign" value="lt" />
> <param name="quality" value="high" />
> <param name="scale" value="noscale" />
> <param name="wmode" value="transparent" />
> <param name="FlashVars"
>
>
value="&MM_ComponentVersion=1&skinName=Clear_Skin_3&streamName=videos/2007_fishi
> ng_video&autoPlay=true&autoRewind=true" />
> <embed src="FLVPlayer_Progressive.swf" wmode="opaque"
width="550"
> height="367" quality="high"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash"></embed>
>
flashvars="&MM_ComponentVersion=1&skinName=Clear_Skin_3&streamName=videos/2007_f
> ishing_video&autoPlay=true&autoRewind=true"
quality="high" scale="noscale"
> width="550" height="367" name="FLVPlayer" salign="LT"
> type="application/x-shockwave-flash"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
> </object>
> </noscript>
>
>
--------------010106060209070007020804
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
actually, i can see in that code that you do still have wmode
transparent stuff in there. if you look just a little before
the ending
script tag, you'll see some. and then it's also in one of the
parameter
tags. in fact, you have the wmode=transparent parameter tag,
but not
the one that the instruction i gave you said to put in!
actually, it
doesn't look like you followed the instructions i gave you at
all! at
least not completely.<br>
<br>
i think your best bet might be to just delete the
video from the page
(your code is too messed up for me to figure it out, sorry)
and
re-insert it, then follow the instructions on the link i gave
you. but
you need to do EVERYTHING it says to do, all the way until it
says <strong>"2.
Hiding the <select> element:"<br>
<br>
</strong> if you start fresh and follow those
instructions precisely, i
think it will work!<br>
<br>
just started wrote:
<blockquote cite="mid:[email protected]"
type="cite">
<pre wrap="">courtney (n h c) wrote:
quick question: when you did the stuff in the link i gave
you, did you
remember to take out any wmode/transparent stuff that you
already put in
there?
Yes I did take out the wmode/transparent.
This is the code. Thanks.
<script type="text/javascript">
AC_FL_RunContent(
'codebase','<a class="moz-txt-link-freetext" href="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#">http://download.macr omedia.com/pub/shockwave/cabs/flash/swflash.cab#</a>
version=8,0,0,0','width','550','height','367','id','FLVPlayer','src','FLVPlayer_
Progressive','flashvars','&MM_ComponentVersion=1&skinName=Clear_Skin_3&streamN am
e=videos/2007_fishing_video&autoPlay=true&autoRewind=true','quality','high','sca
le','noscale','name','FLVPlayer','salign','lt','pluginspage','<a
class="moz-txt-link-freetext" href="
http://www.macrome">http://www.macrome</a>
dia.com/go/getflashplayer','movie','FLVPlayer_Progressive','wmode','transparent'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase=<a class="moz-txt-link-rfc2396E" href="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0">"http ://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
rsion=8,0,0,0"</a> width="550" height="367"
id="FLVPlayer">
<param name="movie" value="FLVPlayer_Progressive.swf"
/>
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="scale" value="noscale" />
<param name="wmode" value="transparent" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=Clear_Skin_3&streamName=videos/2007_fi shi
ng_video&autoPlay=true&autoRewind=true"
/>
<embed src="FLVPlayer_Progressive.swf" wmode="opaque"
width="550"
height="367" quality="high"
pluginspage=<a class="moz-txt-link-rfc2396E" href="
http://www.macromedia.com/go/getflashplayer">"http://www.macromedia.com/go/getflashplayer" </a>
type="application/x-shockwave-flash"></embed>
flashvars="&MM_ComponentVersion=1&skinName=Clear_Skin_3&streamName=videos/200 7_f
ishing_video&autoPlay=true&autoRewind=true"
quality="high" scale="noscale"
width="550" height="367" name="FLVPlayer" salign="LT"
type="application/x-shockwave-flash"
pluginspage=<a class="moz-txt-link-rfc2396E" href="
http://www.macromedia.com/go/getflashplayer">"http://www.macromedia.com/go/getflashplayer" </a>
/>
</object>
</noscript>
</pre>
</blockquote>
</body>
</html>
--------------010106060209070007020804--

IChat Video Conference Quality?

Hello,
I am thinking about purchasing a Macbook and using it for one-on-one video conferencing, but would like to know if the webcam video quality is really as good as it is in the store demo. That is, when you video conference with others (Mac and PC), is the video you receive sharp, or is it blocky (more like big pixels) and response slow even with a cable modem? I am asking because we also have a new Sony Vaio and the webcam quality is pretty poor with video conferencing using AIM, Sightspeed, and Windows Live Messenger. While at the Apple store the salesperson was not able to connect to anyone outside of the store, so I was not able to gauge the quality. Also, are you able to make the video window larger? (it seems so small)
Thanks for any feedback…
Windows XP Pro

The primary determinant of iChat video conferencing quality is the upstream Internet connection speed on both ends of the call.
But for a given connection speed such as yours (whatever it is), I'd say that Mac to Mac iChat video conferencing would be clearly better than PC video conferencing on AIM, SightSpeed, or Windows Live Messenger. It's not going to be as good as what you saw in the Apple Store unless you have an upstream connection speed of 1500 Kbps or greater.
I have both Macs and PCs, but I always choose to use iChat Mac to Mac video conferencing whenever possible. As a Mac alternative to iChat, I prefer Skype for Mac with video and recommend it for Mac users who need to video-connect with PC users.
Both iChat and Skype offer up to full-screen video.

Changing default video viewer

There is prob an easy solution to this question, but here goes. I just recently purchased a MAC BOOK PRO, on my mac the default video viewer is quicktime, how do I change it to VLC? So when I click on a movie it opens in VLC without opening VLC and selecting the movie

To open wmv files you will need Flip4Mac.
To open open other .mov, avi, type of files you will need VLC Media Player and Perian.
It will also be to your best interest if you install the latest version of Adobe Flash Player.
After the installations, repair permissions and restart your computer. Instructions for repairing permissions is in the Mac os menu and http://docs.info.apple.com/article.html?artnum=25751
To make any of the above default players except for Adobe Flash Player & Perian, follow my previous instructions.
If you are a new Mac user - Video Tutorials-Learning about Macs.
You also have 90 days of free phone tech support if your computer is new. Take advantage of it before it runs out.

Artwork and Video Viewer Settings Won't Stick

In my latest version of iTunes (9.0.2), the artwork and video viewer (lower left corner of screen) has the usual two settings: "Now Playing" and "Selected Item". I usually select "Now Playing", and in prior versions, the app would remember that choice. Now, after the latest version update, it always defaults to "Selected Item" upon startup. Any reason why? Can I make it so the last selected settings stays there after I close the program, as it did before? Or is this a bug issue? Anyone else having this problem?

In my latest version of iTunes (9.0.2), the artwork and video viewer (lower left corner of screen) has the usual two settings: "Now Playing" and "Selected Item". I usually select "Now Playing", and in prior versions, the app would remember that choice. Now, after the latest version update, it always defaults to "Selected Item" upon startup. Any reason why? Can I make it so the last selected settings stays there after I close the program, as it did before? Or is this a bug issue? Anyone else having this problem?

I am getting 'blocked plug in' messages which prevent video views and webinars. I have updated Adobe, but still get the message. What should I do?

I am getting 'blocked plug in' messages which prevent video views and webinars. I have updated Adobe, but still get the message. What should I do?

OS X 10.6.8?
Safari 6/7
1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.   Quit Safari.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.
3. Safari > Preferences > Privacy
    Press the button “ Remove All Website Data”.

Video Viewing Quality on 5G

Similar Messages

Maybe you are looking for