Video: White screen

I simple convert video (Convert selection for iPod) in iTunes. Few times I saw white screen on iPod instead of video, sound plays good. Why? How to solve it?

uh.. codec onboard? well the clip lives on an external hard drive. it plays fine in quicktime, but it won't play in fcp, hence the need to convert. will copy to my hd and see if that makes a difference.
(had the same problem in sorenson squeeze as well - audio was fine after transcode, but picture was a watermark of their logo)

Similar Messages

Firefox 13 flash player not working with video (white screen)

I moved to the new 13 version, but there is a white screen where the video is supposed to run. Youtube is also showing an error (not playing video).
I thought it was the new update to the flash player, but chrome and IE are working fine so it is a firefox thing.

Hello All,
I just spent hours figuring out a solution for this problem. THEN I noticed that Firefox had an official "response" to the issue, [https://support.mozilla.org/en-US/kb/flash-crashes-or-does-not-load-firefox-13 Here] .
I didn't try any of the 'fixes' listed in the above article, because I'd already lost my patience and reverted back to a previous version of Flash until a proper and official fix becomes available.
Here are instructions on how to revert back to an old version of the Adobe Flash Plugin.
''' I've attached pictures for all of the steps below''', as a visual reference. To be entirely honest, you may want to just look at the pictures. I tend to go into a lot of detail when typing out instructions, and the pictures may be easier to follow. :-D
'''IMPORTANT :''' First, you must uninstall the current Flash Plugin from the Programs list on your computer. For me (Windows 7), you can do this by going into Control Panel -- Programs and Features -- Find "Adobe Flash Player 11 Plugin" in the programs list -- Right Click -- Uninstall.
Now, follow the steps below. Remember: pictures are attached below for visual representations of each step.
*'''Step 1:''' You need to know which version of Flash to download. Open [http://get.adobe.com/flashplayer/ THIS LINK] in a new tab to go to the main Flash Download page, and at the top of the screen you'll see this: '''Adobe Flash Player 11.3.300.257 (9.36 MB)''', and directly under it, you'll see this: '''Your system: Windows 32-bit , English, Firefox'''. Remember this information. You will be needing it later.
**'''NOTE:''' That is just a sample. Your system could be Mac, Spanish, whatever. The point is, Adobe will let you know which system you're running, and therefore, which Flash Player you'll need.
*'''Step 2:''' After you've seen which system you're running, click on the ''''Do you have a different operating system or browser?'''' link directly below your system info.
*'''Step 3:''' A new page will appear. You DO NOT have to select your operating system or version from the drop down lists. Just look below the "Download Now" button, and you'll see a message saying ''''If your operating system/browser combination is not displayed, ''click here'' for older versions of Adobe Flash Player.'''' Click on that light blue "Click Here" link.
*'''Step 4:''' A new page will appear again. This page is titled ''''Flash Player Help / Archived Flash Player Versions.'''' When you get to this page, scroll waaay down until you get to the section titled ''''Release and Content Debugger Archives'''', (directly below the chart).
*'''Step 5:''' Click on any of the listed versions of Flash Player to download. I clicked on the topmost one (Released: 4/13/2012, Version: 11.2.202.233). Download this .zip file to your computer.
*'''Step 6:''' Open the .zip file, and install this version of Flash Player as usual. Again, I'm running Windows 7 32 bit, so from here on out, I can only provide instructions for similar Operating Systems. But I'm sure you'll get the idea.
'''For Windows 7:''' Double click on the .zip file you just downloaded to open it. One file folder will be displayed inside (mine was titled ''fp_11.2.202.233_archive''). Open this file folder.
Next, remember which 'bit' your system is running (this information was from Step 1), and click on the appropriate folder. My system is 32 bit, so I clicked on the first 32 bit folder (titled ''11_2r202_233_32bit'').
A whole bunch of files are contained in this folder. Once again, I can only speak for myself, but I chose the '''''flashplayer11_2r202_233_win_32bit'' Windows Installer Package''' file. A setup was executed, and a previous version of Adobe Flash Plugin is now installed on my system.
It's been running flawlessly ever since! YouTube works again, and though I have a huge headache, it works for now until a fix is released by Mozilla.
I don't know a lot of technical terms, but I wanted to at least attempt to explain this fix for others out there with the same YouTube/Flash/Mozilla Firefox problem. If anyone has any questions, feel free to reply and I'll certainly try to help you!

IPod Video - white screen, no video, won't turn off either

Greetings.
I have an iPod video that recently has been giving me quite a bit of trouble. The lcd doesn't display the menu or anything 95% of the time. The backlight turns on so it looks like it's powered, but I can't see the menu or anything else. When I turn it off, dark lines, sometimes horizontal, sometimes vertical go across the screen. The lines also sometimes appear as colored lines when the screen is lit.
Also it doesn't want to turn off via holding the center and menu buttons. It will go dark, then I'll feel some minor mechanical vibrations followed by an audible click (not the wheel). If I let the buttons go after about 10 seconds the screen turns on again to white screen without any video.
If I keep holding down the center and menu buttons, then it will continue to do cycles of the mechanical movements followed by the audible click, then do the movements and click again and again. Once I let go, the white screen reappears.
I've tried accessing the diagnostic mode, but that doesn't work since it just starts up in the white screen mode with no video.
I'm way past my warrenty. I've already opened my iPod several times to ensure all of the wires are firmly attached. I think its the LCD, but since it has trouble turning completely off, I wasn't sure if that means it's actually the logic board.
Any suggestions? Would it be a smart to try replacing the LCD screen? Or is it R.I.P. for my iPod?
Thanks!

Hopefully the battery has leak after long disused.
Recharge the iPod battery for at least 4 hours, normally it would take 30 minutes of recharge before the screen comes to live.
Disconnect the iPod, safely, after charging.
If your battery is good and can recharge fully.
Hard Reset the iPod - Press Menu and Center button simultaneously for about 10 secs till the Apple logo comes ON.
Select your preferred language.
Connect your iPod back to the Mac, and see if it is recognised by iTunes or Finder
Good Luck! and you will need it when syncing your iPod.
Here is the Apple Support Article for reference
http://support.apple.com/kb/TS1410

No video - white screen

hi, i'm trying to convert an mp4 video to prores 422 for editing in fcp. i get audio in the final result, just not video. only a blank white image. any ideas??

uh.. codec onboard? well the clip lives on an external hard drive. it plays fine in quicktime, but it won't play in fcp, hence the need to convert. will copy to my hd and see if that makes a difference.
(had the same problem in sorenson squeeze as well - audio was fine after transcode, but picture was a watermark of their logo)

White Screen on Satellite A665-S6086

I bought this laptop about a year ago. About a month ago, the laptop screen started turning white for no reason, randomly. It could be in the middle of the laptop being used or at boot.
Does anyone know what problem this is? Is this the driver, or the display chip itself? How do I fix this problem?
What so disappointing is how this happens while the laptop is still fairly new and not abused at all? I did a search and found out there are other people having the same issue. Is this a product quality issue?
I'm not going to spend hundreds of dollars sending it in to Toshiba repair center for repair, the warranty just expired a couple months ago. I'd rather go buy another laptop, and I'm sure not to buy another Toshiba again.
YQuy

I had the same problem IN November 2011. Toshiba had me reset to factory settings refusing to repair until December. I got it back right before the warranty expired. They repaired video wire. Two weeks after warranty was up it started again. Now the computer is just about useless. It is more whitescreen than functioning. Any videos white screen it. Startup, shut down, random.
I too must now either pay for something they supposedly fixed or buy a new computer which to me will also NOT be a Toshiba.

White screen on new ipod

Brand new ipod 30g video, white screen when hooked up, reset give three tone chime and then white screen again
ANy thoughts?
many macs Mac OS X (10.4.6)

Welcome to Apple Discussions!
Put the iPod into disk mode...
Putting iPod in Disk Mode
Then restore the iPod...
Restore the iPod
btabz

I am working on a Veterans Day program for school and I shut down the computer and now I can't get the desktop to load. It is all a white screen. What do I need to do, and can I get my video back?

I am having difficulty getting back on my computer. I have to have the Veterans Day Program done by next Monday, and it will not boot back up. All I get is a white screen. If I push Options and F4 I can get system preferences, but that doesn't seem to do any good. It was telling me before I shut it down that my Start up menu was full? What does that mean, and would that be my problem, and how would I fix it? I would appreciate all the help I can get, I haven't saved anything yet that I was creating. I have videos of the student singing that I will not be able to do over again. Please Help!!!
Thank you!
Charlene23

How about in your Applications folder?

White Screen: xf86-video-ati and Compiz After Trying fglrx? [SOLVED]

I have an ATI Radeon X1200 graphics card. I recently tired the ATI proprietary catalyst driver (and catalyst-utils) from the AUR. They did not work well for me, so I uninstalled them. I had run "aticonfig -initial" but, after removing catalyst and catalyst-utils I restored my old xorg.conf. For some reason, with xf86-video-ati set up again, compiz starts, but goes to a white screen. I can see and move my cursor. Everything functions normally, I just can't see anything. I right clicked my desktop and created folders as a test. When I rebooted without compiz, the clicks had been received and folders had been created. How can I fix this? I'm using Gnome (if that means anything). Here's my /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "drm"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "13ce"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS690M [Radeon X1200 Series]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by hank863 (2009-03-29 03:15:26)

Fixed It!! I had to reinstall xorg, mesa, libgl, xf86-video-ati, and ati-dri for some reason.

With ios 7.03 I cannot expand youtube videos to screen size but get white blanks all around the stream

since the update to ios 7.0.3 I cannot expand Youtube videos to screen size - instead, the features around the video dissappear and are replaced by white fields. With my ipad mini I do not have that problem.
Does anybody know advice?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

Video appearing as white screen in Final Cut Pro

When i import files and select them from the browser, the video is just coming up as a white screen, i can still hear the audio perfectly, but i don't have a clue whats wrong with the video. Has anyone experienced this before ? If so could you let me know how to fix it ?
Thank you.

Why gives me NIGHTLY and the latest ADOBE FLASH PLayer sound only with a white screen when trying to watch a video offered by any newspaper, e.g.?

System Win7 Prof
Nightly 13.0a1
Latest Adobe Flash Player
Whenever I try to open a video browsing any news-paper,
I receive sound but no picture to the sound;
the picture is a white screen only.

Hello ToriTorres,
You question seems quite general, and this is a CQ5 dedicated forum dealing with CQ specific questions. If your problem is linked with Adobe Flash Player, please try to post in the corresponding forum http://forums.adobe.com/community/flashplayer
Regards

White line in iTunes Video Full Screen mode

Since my last FW update I do always see a white horizontal line (top of screen) when playing a video in iTunes or Youtube in Full Screen Mode. Does anybody has experienced the same?

Well, I found something interesting. If i go to any buy/rental trailers it plays in full mode. Only above white screen happens when I go to Theatrical Trailers, for example, go to new Die Hard and try to play any trailer and see if it plays for you in full mode.

White Screen when Video Plays

I am using Premiere Elements 9 software. When i add clips to the timeline and hit play, the video does not play in playback screen, instead i just get a white screen. Once i hit the puase button, the picture of the frame the playerhead is on goes back onto the screeen, but as soon as i hit the play button, the screen turns white again. I have updated my graphics card drivers and the prject settings are correct. What is causeing the issue?
This is what i get when i hit the play button:
tim

Thank you for that info. You have got a pretty recent (did not check, but that might be the latest) video driver. I sort of expected to see a date about 6 - 8 mos. ago. If there IS a newer driver, I would definitely try that. Also, as over the years, both nVidia and ATI/AMD have issued drivers, that were just bad with Adobe programs, I keep older (known good) drivers on my HDD, just in case I have to roll-back.
Do you have a Dell, HP, Lenovo or Toshiba computer? The reason that I ask is that those companies very often re-wrap the nVidia (and ATI/AMD) drivers, to work with their tweaked hardware.
With the latest video driver, and that Canon footage, if you have the proper Project Preset, things should edit fine. The smoothness of editing/playback will be heavily dependent on your CPU's speed, but should not affect the display.
Good luck,
Hunt

White Screen when "video" chatting with PC

My friend is running AIM 5.9 on Windows XP and when I try to video chat with her, all she sees is a white screen, but still can hear me. I have rebooted my computer, and so has she. We used to not be able to connect at all, but she rebooted and now she can hear me.
What should I do?

Hi Brendon,
What has she done to set up AIM on her end ?
Has she enabled it though her XP firewall ?
Has she enable the ports AIM needs in her modem ?
8:38 PM Tuesday; December 19, 2006

Video preview not working, I can see only white screen.

Hello, I have been using Adobe Premiere on my Vista64 for a while, but few days ago I started having problems with previewing video. I can see only white screen, which doesnt react on anything I do in premiere (trying to preview movie, add grids etc.) I tried to reinstall many times but only thing I managed after one reinstall was that it started showing me what is on the timeline when I clicked on a timeline, but when I wanted to play preview it was frozen and then it turned white again. Since that it is still white.
Playback in other adobe programs (such as After Effects) works fine on my computer.
Would you please help me to find out what causes this problem and how to fix it? (I doubt it is codecs because it worked fine before and then it suddenly stopped working without any change in codecs...)

It may or may not be possible to verify the usage of such a technology device. And where did you get the idea that it costs $10 to manufacture and sell an iPad? I think the parts cost alone was $260, not counting manufacturing, shipping, storage, retail space, salespersons, helpdesk support, all the other overhead costs, etc. etc.
With so many people out there trying to scam the system, it will be an uphill battle to try to convince anyone that you bought it and didn't open the box for 14 months. That's very unusual.
At some point, the store you bought something from (in this case it was Apple) has to say no. What if it had been unopened for 2 years, or five years, or 20 years? This is what the warranty period is all about. It starts on the day you buy it and ends at the end of the warranty period, regardless of usage.
I am sympathetic to your plight but if you are able to get a new iPad (refurbished would be more likely), it will be through the kindness of Apple going above and beyond. If you do not get one, it is not Apple's fault you waited this long and there is no requirement for them to replace it.

Video: White screen

Similar Messages

Maybe you are looking for