Video With No Audio?

Hello,
My third generation Apple TV will play videos but the audio will not sound. This problem has just, randomly, started today. Though, I still hear the clicking sound when I scroll from app to app. HDMI is conectecd and there is a strong wifi connection.

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Restart the Apple TV (Settings > General > Restart).
    2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    3.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    5.    Restore the Apple TV (Settings > General > Reset > Restore)

Similar Messages

How do I import AVI video with stereo audio (and keep it that way)?

Today I just discovered that all the AVI video with stereo audio I've ever imported into a Premiere Pro CS6 project has been mysteriously converted to mono. And I can't find any import setting anywhere that enable me to change this.
Here's the deal...
I've have an AVI file with stereo audio (the file is actually a stereo sound test that I downloaded to prove that I wasn't imagining things). On my hard drive, I right-click and view the properties:
Video
Length: 00:00:36
Frame width: 320
Frame height: 240
Frame rate: 25 frames/second
Audio
Bit rate: 128kbps
Channels: 2 (stereo)
Audio sample rate: 44 kHz
I click on it to play and listen with headphones--everything is playing in the correct part of the stereo spectrum. Then, I import it to Premiere, click the file name in the left content menu, and check the properties, suddenly they read:
Type: AVI Movie
File Size: 1.1 MB
Image Size: 320 x 240
Frame Rate: 25.00
Source Audio Format: 11025 Hz - 16 bit - Mono
Project Audio Format: 11025 Hz - 32 bit floating point - Mono
Total Duration: 00:00:36:15
Pixel Aspect Ratio: 1.0
Sure enough, I drag it into the sequence, listen to it, and it's indeed playing mono. Outside of Premiere, the original source file still reads and plays correctly with stereo sound.
When I import stereo WAVs and MP3s, it keeps the original stereo channels without me having to do anything special. I even just imported the same exact file as a MOV with stereo audio, and it showed up in Premiere as:
Source Audio Format: 44100 Hz - 16 bit - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
What is going on here with AVIs? Am I doing something wrong? Are there settings I'm missing somewhere?
(And before anyone suggests I only use MOV in the future... that's not exactly the answer I'm looking for.)

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

Synching video with external audio source

We shot an interview, and somehow no audio was recorded...no worries, we had a little digital recorder going as a backup....
I synched the video with the audio, and all is good for about 10 seconds, but then, sure enough, the audio begins to go out of synch,...
I suspect this has to do with the whole 29.97 vs 30 fps issue, i did play around a bit, but couldn't figure it out...
any suggestions?
the video is regular DV...
audio is 32hrz WAV (converted to 48 hrtz AIFF, no help)
anyone?

This is a problem that comes up regularly around here so try searching.
The clips must be different lengths, yes?
The audio clip may be the same length but it must be clipped off.
The way I have dealt with this on a friend's system (using a Canon XL1 as the DV input) was to simply open the Speed window of the of the audio clip and enter a new time so it precisely matched the time of the video clip.
Say the event is exactly 60 seconds long from first frame to last frame. The audio drifts out of sync so it is slightly longer, say, 61 seconds. You control-click on the audio clip in the timeline and enter a new length. It may need to render.
sorry not to have the absolute answer. Double-system sound just doesn't come up very often in my life. Luck, let us know.
bogiesan

Is there any way i can record a video with 2 audio sources?

I want to be able to record a video with 2 audio sources (1 being a mic and the other being a guitar, both plugged in by usb's) while recording myself playing at the same time. I usually use an aucoustic but the sound is obviously much better when i plug straight in, is there any way i can do this without recording everything seperate? Im using a macbook pro.

Are you looking to do post recording adjustments to the separate tracks? That really determines now you do this.
If you not looking for multitrack recording (you just want to combine the two signal into one and record that) then probably the easiest thing to do would be to get an external mixer that would accept multiple inputs and output as USB . Then you could set the levels with the mixer and just worry about recording the one signal.
You could try using the MIDI Audio Setup app to create an aggregate device (one that will accept multiple inputs).
There is also the 3rd party app Soundflower. It's an app that takes audio signals and allows you to route them between apps and to combine audio signals. It is dated but still works in 10.8
regards

How to render mp4 video with 4 audio channels?

How to render mp4 video with 4 audio channels?

Hi Aineaine,
Welcome to Adobe Forums.
Please refer to the below article for multi channel audio.
http://helpx.adobe.com/premiere-pro/using/clips-channels-tracks.html
Thanks

Video with Multiple Audio Tracks-- IOS 4.2 Removes Way to Select Them

After upgrading to IOS 4.2 on my iPhone 4, I've found it no longer lets me select from among multiple audio tracks. The option and button is completely gone.
I encode my videos with AC3 audio as the first track (for my home media devices), and stereo audio as the second track (for the iPhone). Now the iPhone will just play the video, with no audio, and no way to select another track. This is extremely frustrating as I've encoded all my DVDs this way, and never had any issue with playback like this on any IOS device going back to the first gen iPod Touch.
Anyone else have this issue, and know of a work around? Thanks!

I too have the exact same problem for the exact same reason. Did you ever figure out a workaround (other than reencoding all your videos)?

Why video with two audio tracks imports like one track (main)?

Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
- I make video with two audio tracks (screencast with system sounds and microphone, separated)
- Import it to Premiere CC and see only one audio track, system sounds!
- What should I do to see both of them?
- Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?

Great first post!
Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
Channel Map the Audio to do what you want it to do with t e source clip.
Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?
You could have read the Premiere Manual or watched the Adobe TV Tutorials or gone to edit school instead ...

Broadcasting MPEG 2 video with multichannel audio

Dear sir
Using PrPro 2 or CS4 I want to export MPEG 2 video with multichannel audio ( 2 separated stereo channels ) for broadcasting purposes .
As you know there are some TV channels that allows you to switch between two audio tracks , which I am looking to accomplish
This is some of specifications that I use for video production :
1. Primer DV PAL preset .
2. AVI format
3. Canopus Grass Valley ProCoder 3 ( to convert video from AVI to MPEG 2 ) according to the Broadcasting standers .
As you see I'm not able to separate the 2 Audio tracks when I try to export the video file.
So If you have specific method or steps to apply ( 2 separated stereo channels ) for one video file , please be kind to inform me with it .
also please let me know if I missed any details .
Best wishes

Very very very nice that is all what I am asking for .
I tried and it worked perfectly but the file has a .VOB extinction … I changed it to .mpg and now I can play it in Windows Media Player too .
Ok , so far so good, your advise was very helpful so thank you very much but what abut broadcasting ? is it going to mach the broadcasting standers ?
I know.. these are lots of stupid questions but I am asking if you know any thing about it or some resources that can be used.
When I converted it using The ( Procoder ) to mach the broadcasting standers I got only one audio track .
I appreciate the generosity and your attention .
Best wishes

I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?, I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?

In Final Cut Express I have two videos I'd like to merge parts of each video into a final film. What is the best way to do this in FCE?

Hi
I use a slightly different way than Alchroma.
Same
• One video on track 1 and the other on Video.track 2
• Resize to 25% and move one to the left and the other to the right
Diff
• I don't use the blade tool
• I use the Pen tool and change the transparency - then I get fast or slow transitions in same stroke and easy to fine-tune later if needed. (But this can be done with the Roll-tool if Blade is used - so it might be as easy)
Final
• Resize to 100% and Center
Video is done
Audio - very close to this by changing the level so that best audio will dominate
• Pen tool here too
But that's me - the Alchroma way is as good as this or may be better for some
Yours Bengt W

VideoDisplay plays video with no audio

I am experiencing times when my VideoDisplay object plays the
video fine, but with no audio. At that point, all audio in the flex
application cannot be heard. Has anyone else experienced this
issue?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Restart the Apple TV (Settings > General > Restart).
    2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    3.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    5.    Restore the Apple TV (Settings > General > Reset > Restore)

Export Video with Multiple Audio Tracks

I need to be able to export video with audio on multiple tracks. I have moved to CS6 from FCP 7 where this was rather easy to do. I can make a preset in AME with more than enough mono tracks but after the encode the video is always smashed to one mono track. I am not doing a 5.1 mix, there are different mic's on each track that need to remain independant of one another and mixing them down within Premiere is not feasable. Are there no options to just have the audio 'pass through' like Compressor? Sorry if there are other posts but I have been searching forever and can not find a simple answer on this topic.
Also, is there no way to have the source timecode burn in? Putting a filter on the video in a sequence is unacceptable, I am very displeased to find that this doesn's seem possible in AME or Premiere, it has been part of Apple's suite for years.
Example of my preset from Compressor:
Name: Apple ProRes 422 (Proxy)
Description: QuickTime movie with Apple ProRes 422 (Proxy) and audio pass-through
File Extension: mov
Estimated size: unknown
Audio: multi-track pass-through
Video Encoder
          Width: (100% of source)
          Height: (100% of source)
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: Apple ProRes 422 (Proxy)
          Multi-pass: Off, frame reorder: Off
          Automatic gamma correction
Progressive
          Pixel depth: 24
          Spatial quality: 50
          Min. Spatial quality: 0
          Temporal quality: 0
          Min. temporal quality: 0
Timecode Generator
          Position: Lower Right--Title Safe
          Alpha: 1.000
          Label: Source Timecode
          Start Timecode at 00:00:00:00 false
          Text Color: r:0.0000, g:0.0000, b:0.0000
          Font: Helvetica, 36

Hi James,
For exporting a multitrack .wav file, you have to start a project with a multichannel audiomaster (3-16 tracks).
Copy and paste your complete edit to the new editsetting.
Now in the audiomixer you can route your audiolayers to the multichannel you like.
(CH1+2 pan to left is channel 1, pan to right is channel 2 and for a stereo track pan to center : channel 1 for left and channel 2 for right.)
Then you export your project to a 3-16 tracks multitrack .wav file.
When you need mono tracks you can import your multitrack .wav file in premiere. Then send it to Audition (edit in Audition) and then adobe will convert the file into mono tracks.
You'll find the mono tracks in your audio capture folder or can premiere search for then by 'reveal in explorer'.
The multi track .wav file has got timecode within the file.
When exporting in QT you can also choose for a multitrack audio file. It also contains your timeline timecode.
.avi or .mp4 video files cannot be exported with more than 5.1 channels of audio
MXF OP1a in XDCAMHD can also be exported with max. 16 channels of audio. It also contains your timeline timecode.
Hopefully you can get further with Premiere Pro with this info.
Succes with it!!
gr. Mano

Problem with xvid videos with two audio streams

/ Hi,
recently I purchased a Creative Zen X-FI2, it is working perfectly, but I only have one problem, I have some videos xvid with two audio streams (mpga), on VLC I can select either of the two audio streams but I haven't found if I can select the audio stream on the Zen player.
Does anyone knows how to select among different audio streams on a video?

The X-Fi2 doesn't have such an option.
If you still want to be able to watch the video with the second audio stream, I think the only possibility is to re-encode it using the second audiostream (or disable the first).

Creating Video with Multiple Audio Tracks?

Not sure if this is the right place to post this question but I figured its compression/video codec related so someone might have an idea...
I've used Handbrake in the past to rip a DVD with an audio commentary that allowed for multiple audio tracks that could be played back in iTunes/Quicktime (though not on the iPod Classic for some reason... perhaps someone knows the answer to this?)
I was just curious as to whether or not this was possible to do WITHOUT first making a DVD with an 2ndary track? I was hoping to record audio commentary for one of my shorts, and put it up on the web, but wanted to avoid the step of going to dvd first then ripping it.
is this achievable in compressor? do I need to use a third party app? thanks so much.

ehmjay wrote:
is there any app (be it from apple or a 3rd party tool) that will allow me to add a secondary audio track for switching in quicktime/iTunes? if so could you point me in the direction of it (or even instructions)
I'm afraid I'm unaware of anything - outside of HandBrake - that does encode a second track of audio. But I haven't exactly had my eyes open since I haven't needed to do this for a client yet.
handbrake mentinos that its able to rip secondary audio for use with iPod Classic/Apple TV... however so far it hasn't worked for me. Does this mean that while handbrake is doing it properly its just my iPod itself that's having the troubles (like I said that alt. audio is there in iTunes/Quicktime just not on the iPod itself)
I am pretty sure that the issue is that the software for iPod Classics - as is the case with AppleTV and, even, QT Player - which won't allow you to switch over to the other track. But I haven't had to work with the Classic in a while, perhaps there is a setting in Audio (or Video) that gives you the pop-up option you're seeking?

Video with out Audio...?

hey mine one is 30 GB black video i-pod,
1, when i imported and converted mpeg3 or avi files to i-pod compatible its takin very longtime to convert... what to do with this...
2, Even after converted and updated, Video is playing properly but with out audio... what could be the problem

Does the video play with sound in iTunes? If not then the video is broken. iTunes does not convert videos when you drag 'n drop, but it is possible. This is often (always) not successful and would be easier if you bought QuickTime Pro, although slow it is the. best programme for making iPod compatible video. The other option that I heard is good is Videora, search at versiontracker.com for this. I don't know off hand (I use a mac) but I hear it is good.

Alternatives for importing video with two audio paths.

So, I been on the Mirillis Action!(Screen Recorder) Forums and, have not found the solution. The problem is when I import the file it says its not supported.
Like you see there, so the video specs are .avi files with 2 audio paths.(Action! recorder has a feature where it records your commentary and saves it in the avi file as the second audio path) Apparently, WMP only plays the game sound, not video at all. Plus, Virtual Dub will not import it. (See second image)So I don't know how to fix this but, you guys are good at using this program! I hope you guys will find a solution soon. I'm thinking of getting some codecs, but I don't know where to start.

Someone help me find the problem it was this So, I'm all set thank you for your time.

MPEG videos with AC3 audio in iMovie

Hi there,
Aplle seems to totally ignore AC3 audio streams (at least in MPEG videos)! Why?
My JVC cam corder records *.MOD files on its hard disc. Those files
are in fact MPEG2 files, but with AC3 audio.
Renaming the files makes them playable using the Quicktime Player, but
without the sound
MPlayer is able to play them correctly, but that does not help me,
because I want to use the videos in iMovie and iDVD.
I tried installing the 'AC3 Codec.component' (what is supposed to fix
the problem for AVI files)
and now I installed Perian, which does not do the trick either.
I can ofcourse use ffmpeg to convert the files, but that means a
quality loss and a lot of work I wanted to save by buying a Harddisk
camcorder, so I could skip the time consuming conversion from DV tapes
to mpeg.
I there anybody out there with a solution?

QuickTime doesn't like to play the multiplexed sound on mpg videos. The QT Plugin ONLY supports video playback and NOT the audio track of such content (as you have found out).
I suggest you look at VisualHub software ( http://www.techspansion.com/ ) to convert your files to DV. It works with my problem mpg-4 files with multiplex audio. It runs in a free trial mode so you can verify it does what you want before buying it.
F Shippey

Video With No Audio?

Similar Messages

Maybe you are looking for