Video with Synched Slides used as a Video Component ?

I would like to take an existing Synched video and slide show
.fla file and convert it to a FLV file for insertion onto a page
with multiple videos. I was willing to try and convert to QT format
and then convert to FLV and drop the video component on the page,
however CS3 reqiuries you to output in flash 5 format for QT
conversion....... CS3 wont let you convert synched slides and video
below flash 6. Hope this makes sense to somebody.... I suppose
there is a much better way to handle what I am trying to do.... Any
help would be most appreciated ....

It seems like your trying to composite......Did you try after
effects?
I think you can do this easily in after effects.

Similar Messages

Проблема с ползунком прокрутки видео. Problem with a slider of scrolling of video.

Russian (the original), русский (оригинал):
Как не старался, не получается захватить ползунок прокрутки видео с первого раза. После шестой, и больше, попытки удается попасть по ползунку и захватить его.
Т.е. пытаюсь нажать на ползунок. Удается нажать с восьмой попытки. Иногда больше.
Мне кажется разработчики что-то не доделали или сделали не так.
e-mail apple не нашел. Звонить - дорого.
It is translated by "Promt".
As didn't try, it is impossible to capture a slider of scrolling of video from the first. After the sixth, and it is more, attempts it is possible to get on a slider and to capture it.
I.e. I try to push a slider. It is possible to push from the eighth attempt. Sometimes it is more.
Something seems to me developers haven't completed or have made not so.
The e-mail apple hasn't found. To ring - it is expensive.

Russian (the original), русский (оригинал):
Как не старался, не получается захватить ползунок прокрутки видео с первого раза. После шестой, и больше, попытки удается попасть по ползунку и захватить его.
Т.е. пытаюсь нажать на ползунок. Удается нажать с восьмой попытки. Иногда больше.
Мне кажется разработчики что-то не доделали или сделали не так.
e-mail apple не нашел. Звонить - дорого.
It is translated by "Promt".
As didn't try, it is impossible to capture a slider of scrolling of video from the first. After the sixth, and it is more, attempts it is possible to get on a slider and to capture it.
I.e. I try to push a slider. It is possible to push from the eighth attempt. Sometimes it is more.
Something seems to me developers haven't completed or have made not so.
The e-mail apple hasn't found. To ring - it is expensive.

Can't pair Windows 7 PC with 6500 slide using blue...

I am having problems connecting my Nokia 6500 slide to my new PC with Windows 7 using bluetooth. I am able to connect one time after installing Ovi Suite and sync with outlook, but when I try a second time, it can't connect to the phone. Reboot doesn't help.
I also tried to uninstall Ovi Suite and install PC Suite, but the exact same thing happened.
The IT department at the company I work for have not heard of similar issues.
Any help will be highly appreciated.
BR Jakob Carlsen

It seems that connection and sync is working until I try to use the Nokia Phone Browser under Win 7. After that the phone becomes unreachable via Bluetooth.
Phones firmware is on the latest version 10.0.0

How to make a DVD video with iDVD without using themes

How can I record my DVD without using iDVD themes. I do not care about the selections. I just want a simple slide show showing only photos.

Hello puzzledbon,
Than you for the question. You can make a OneStep DVD from a movie to avoid adding a theme to you DVD. Before you can do that, you will have to create your slideshow and export it in iPhoto.
Use the steps in the section titled "Make a saved slideshow" in the following article to create a slideshow in iPhoto '11:
iPhoto '11: Make a slideshow
http://support.apple.com/kb/ph2333
Next, you will have to export the slideshow as a movie using the steps in this article:
iPhoto '11: Export a slideshow
http://support.apple.com/kb/PH2428
If you are using iPhoto '09, you can use the steps in this video to create and export your slideshow:
iPhoto '09: Create and Share a Slideshow
http://support.apple.com/kb/vi14
Exporting the slideshow as a movie will give you a video file that you can use in conjunction with the steps in the following article to make a DVD without a theme:
iDVD '09 (7.x): Burning a OneStep DVD from a movie on your hard disk
http://support.apple.com/kb/ph5524
Thank you for using Apple Support Communities.
Best,
Sheila M.

I took a video using a tripod and I want to blend the video with a copy of the same video. How do I do that without making the video darker or lighter while keeping the opacity of the main video?

I dont want to the people in the main video to become transpartent (ghostly) I only want that to happen with the copy that I am overlaping. The copy will not be at the same starting point as the original, it will be slightly ahead. Everything ive tried has left the video lighter or darker then the original and it looks weird, it was used with a tripod so nothing changes in the video except for the posiioning of the people. I want to have like a trailing affect following the people, like you can get with your cursor on some computers its like its lagging behind? Its hard to explain, I hope this made some sense.. any suggestions would be great thanks.

Since you are disolving two shots together (rather than compositing or keying) it seems like you will always have some slight noticeable opacity as you are effectively bleinding two shots together at 50% opacity each. There is no way to maintian 100% short of keying or compositing. However with the background being the same in both shots the opacity shift should be very minimal.
Although you might consider trying the built in trailing effect in the filters browser and see how it looks, it might achive the effect you are attempting better than blending the two shots.

Captures PAL video with NTSC camera using Premiere Pro 1.5

I try to capture (download) PAL videos from a Sony DCR-HC40 NTSC camera using Premiere Pro 1.5. I can see the movie (on the camera) but none is captured in Premiere. I did it before and it worked, but I forgot the appropriate setting within the Premiere program.
I would appreciate any suggestions. Muenkey

The latter is the problem. As I hit the capture button, the tape in the camera rolls, I can see (and hear) the PAL movie in the view finder and on the LCD screen of the camera, but the capture window stays black (though the frame counter works) and nothing is captured. (This is true whether I use an NTSC or PAL project set-up in Premiere). Again, I know there is a solution. I have done it before but forgot the necessary set-up steps in Premiere.

Am I allowed to monetize my Youtube video with speed painting using Adobe Photoshop software?

Hello!
I have a question regarding monetization of my Youtube video.
If I record a speed painting done using Adobe Photoshop software, where the user interface is visible, can I monetize my video and commercially make money off of this? The focus of the Youtube video will be on the painting and not so much the Adobe Photoshop software (it is not a tutorial).

We're all end users of Adobe products just like you but my reply is the same as Mylenium's.
It won't be officially from Adobe unless you see an Adobe Staff badge next to the responder's name.
It's highly unlikely that Adobe staff will respond in this forum.

Export video with Lumetri effects - 2 to 3 videos render fine, after that flickering, colored frames

After I spent 45 minutes waiting to be transferred to to right department with the support chat, only to find out technical support isn't available during the hours I called, I am going to try this outlet to get some advice:
I have about 50 video files to export, each 20 seconds to 2 minutes long. They all have Lumetri effects on them (I suppose that's what causes the problem).
I can render 2, maybe 3 videos without problems. The next one might be fine for a while, but then all I get is strobelight frames, flickering, and different color frames. One time I even received a blue screen of death. I restart Media Encoder, add files to the queue, same thing happens. 2 - 3 will work, after that it exports garbage.
I am using Premiere Pro CC to edit the video, Media Encoder CC to export it.
The original footage is HDV 50i - 1440 px by 1080px - 1.333 pixelr ratio.
Besides some dip to black and cross transitions the only other effect is a title layer with some static color effects on it, and 2 Lumetri effects (warm midtones and dream 1).
I thought at first maybe it is because I encode in FLV, 1800 mbps, but also when I used uncomressed AVI with the same settings as the original footage the same problem occured.
I have two ATI radeon HD 6950s 1GB in my pc hooked together with cross fire, 16GB ram, the project file is on a SSD, the raw footage on a HDD. AMD Phenom II x4 processor with 3.4 GHz.
OS: Windows 7 64bit.
I did update to the latest GPU driver last night - that didnt fix the problem.
Since I noticed the fans becoming quite loud during rendering, I did put two Ice packs from the freezer on top of the case and pulled it away from the wall a little bit to allow for better cooling (and it did stay a lot cooler with the ice packs).
I do also get funky looking frames inside Adobe Premiere after trying to watch the footage with the Lumetri filter for a while. I'll have to restart the program and it'll work fine.
Any suggestions what I could do? Settings, or something? I dont want to attend to my machiene for so many hours, importing 2 video files at a time, having to review each of them for errors. I'd rather set it up once, and let them all render...

@Peter Garaway:
Thanks for the response.
I use two Lumetri effects:
Warm Midtones
Dream 1
Both applied directly to the clip of raw footage which is in the sequence that gets exported. There is actually one sequence, where I fixed some of the footage putting it into another sequence first, then the sequence into the final sequence that gets exported.
All my clips have both Lumetri effects applied to them. The flickering took place randomly, but it would definitely get worse the more I attempted to render (the first 2 to 3 no problems, on the 3rd or 4th maybe a few flicker seconds in the middle, any more would be 100% flickering - if any flickering or only like a green solid...)
Now Shrishti from tech support insisted the problem was within the sequence. And that kind of made sense, because once we successfully rendered one sequence, there would be no more trouble rendering it a second time, even if the program was already in flicker mode. And also for some reason while we were playing around with it when one sequence failed, even after restarting Media Encoder, it would fail again afterwards.
However last night after it failed I would just try again, doing 2 at a time and it would be successful.
Now I say it failed, but of course no errors no nothing... Just as in the result didn't look the way it was supposed to.
Also I want to mention that especially when I kept it running after it failed (meaning you leave it runnning, producing only garbage) the fans of my computer kept running louder and louder. Not sure if it was the GPU or CPU. Rigth now it keeps rendering in Software mode and the fans are barely louder than under normal usage.
I use the AMD catalyst driver which I downloaded from here:
http://support.amd.com/us/gpudownload/windows/Pages/radeonaiw_win8-64.aspx
While Shrishti was trying a couple of different settings at one time the screen went dark, as it came back on there was a message coming from the windows tray, saying the display driver had crashed, but recovered. One time I also received a bluescreen message, which I will try to attach to this post.
well i guess it doesnt have too much information on there other than... what is that? a memory address?
This happened I believe after the first attempt with the updated driver (I updated from 13.3 to 13.4 )

Synch proxy with synch JDBC using BPM

Hi All,
I have a synch proxy to synch jdbc interface. Actually I need to make two JDBC calls by one synch proxy and collect their data in PI and send all data back once to proxy.
Since I need to make two calls and collect data in one table and send it back to proxy I will have to use bpm in it.
Can anyone please suggest the architure and suitable blog for the same.
Thanks and Regards,
Atul

Check for sync - async bridge scenarios in the forum. You would need a BPM stadard sync-async bridge pattern.
VJ

What kind of Flash Player can i download for Firefox.? What kind of video player can I use to stream videos.

Flash player for streaming? Best video player.

Hello,
Adobe stopped supporting flash for android since ICS. You may still be able to download the latest (old) flash player "at your own risk" from Adobe archived flash player versions:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Please read the disclaimer at the end as it is not advised to install unsupported flash versions.
As for video streaming, there are lot of apps for that and it's just a matter of your preference.
Hope that helps

FireFox with adobe flash using a retina macbook pro under win 8.1 64 bit is lagging . when you move the mouse above any flash game / video

Hi
I asked this question again and i reported this bug , i am a computer engineer and i tested it with few macbook pro retina laptops , when u use win 8.1 64 bit or 32 bit and install adobe flash under firefox try to play any game in facebook , view video on youtube or use any FLASH video and move the mouse above the screen of the flash game / video / etc , the screen will lag alot .
under chrome this problem doesnt exist but the screen is blurry in chrome when using retina screen thats why firefox is better , but the problem is annoying .
i tried to disable hardware acceleration as you suggested still the same problem

Hi thesoulkeeper,
Do you have the bug number? We can try needsinfo to ask for some help.

Satellite A105- S4384 - How to use the s-video port

What is the way to use a s-video cord to connect my 4384 to use TV as a screen?
I use Linux Ubuntu 8.04... thanks

Hi
Usually you dont need any special workarounds to establish the connection with the external TV.
You have to connect the notebook with the TV using the s-video cable.
Please note that the s-video channel should be enabled on your TV.
Then you could change the video output in the graphic card properties.
Using a Windows OS, you would be able to switch to the external TV pressing the FN+F5 buttons but as far as I know on Linux OS this feature will not work.
Greets

Toggle pause & play a video in a slide

Does captivate has function to toggle pause & play a video in a slide using keyboard shortcut?

If using Slide Video, the Spacebar or F3 key may work.

Can I mimic a 'slide show' of stills and videos with this technique

I want to be able to mimic an old fashioned slide show on a Blu-ray disk, except that each 'slide' – I'll call them items – could be a true still, or a still with pan/zoom, or even a short video. Whatever a particular item is, I want to click a button and the show advances to the next item. If the next item is a video, the video pauses on the last frame when it is finished.
Just like the old magazine full of slides, imagine a folder full of items – some may be stills, some videos. After importing into Encore, setting up the navigation and menus, and then burning to Blu-ray, I want to be able to play them in sequence at the press of the Enter button.
I'm pretty much a novice with Encore, and to save spending more time reading the manual, I thought I'd ask if I can mimic a slide show in Encore with the technique described below. I got the idea from page 152 of the PDF manual:
The buttons on a menu are the primary navigation tool for the viewer. They control how the viewer steps through the project. Each button in a menu must lead to another menu, a timeline, a chapter, a playlist, a chapter playlist, or a slide show.
My limited experience with Encore is to set up a series of videos on a single timeline, and generate one menu with a "Start" button on it. When the Blu-ray starts up, the Start screen appears and stays there until I press Enter. Works well.
A slide show of stills using buttons only
So I thought: to generate my old-fashioned slide show (ignore videos for the moment), I would use the buttons themselves as the stills, taking my queue from the quote above: "Each button in a menu must lead to another menu…". My slide show would consist of jumping from one menu to the next. This leads to my first question:
Q1: Is it possible for a menu to have a full-screen button, call it the Image Button, that is actually the still image that is desired to be shown? So the viewer sees the Image Button, thinks it's the image (which it is), but it is actually a button. When the viewer presses Enter, the button activates and goes to the next menu which also happens to be the next full-screen image. The viewer is jumping from Image Button to Image Button, with the buttons filling the screen and being the actual images.
A slide show including videos
To include a video in the slide show, the destination when Enter is pressed would be a timeline with the appropriate video. At the end of this video, the navigation would lead to a menu which has an Image Button of the last frame of the video. The effect is that the video is paused on the last frame, waiting for the user to hit Enter to advance to the next item (still or video).
If there is an easier way to mimic a slide show of stills and videos, please let me know.

Stan – I posted 3 years ago in the Keynote Forums (I'm on Mac) about this sort of thing, knowing that eventually I would want to do it. The answer came back then that Keynote might have problems. So I've recently posted again about Keynote, but no responses as yet.
I expected problems with Encore and welcome some of them. Overcoming problems is the best way to become intimately involved with software.
I'm glad you asked why I don't just use Powerpoint (or Keynote in my case). Now's my chance to clarify my thoughts:
Macs do not upscale very well. Sometimes I may want to show part of a DVD. I've tested playing a DVD on my iMac versus on a Oppo BDP93, fed to a BenQ W7000 projector throwing a 3 metre image. There is an obvious difference in image quality because the Oppo, being hardware based, can interpolate in real time as it scales from 576p (PAL) to 1080P. DVD Player on my iMac simply magnifies the image, resulting in obvious pixellation.
Dissolves and complex effects in Premier challenge any software based h.264 player. I don't like to see decoding artifacts, for example, during a dissolve while a part of the image is also reducing in size, spinning, and disappearing into the distance. An extreme example, but an effect I used once. From my reading of blu-ray player reviews – and from my limited testing – all blu-ray players can easily handle the highest bit rates from a blu-ray disk.
I don't have a laptop so I'd have to buy one. I'd rather spend the money on a dedicated player if that route turns out to be suitable.
I don't trust computers for a presentation. Too unreliable. When I was showing multiscreen audio visuals in the 1980s (4-6 projectors), I always had a backup Tascam 4-track with me, back up soundtrack on tape, back up amp, and a backup slide projector. Even had a backup amp in the car. Speakers, well, if one failed I had two there anyway. With digital, to feel comfortable, I'd have to buy a second laptop. A good quality, backup Blu-ray player can be had for $100. And yes, I do have a backup W7000. I don't trust digital projectors either.
Running a presentation from a laptop always looks amateurish to me. Someone hunched over a tiny screen, fooling around with Windows or OSX. And usually it's all mirrored on the big screen for everyone to see. I'm never impressed. I want to replicate a cinema experience as closely as possible. Darkness, the audience hushed, and up comes the first image.
Any suggestions about automatically linking a whole heap of menus?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

Hello jive
I am playing it back in the slideshow editor/setting up part of
programme where you determine photos/video to be included gaps between
slides, music to play etc This goes through each phot and when comes
to a video the background sound doesnt play, I am using windows 7 and
elements 10.
regards gins51

Video with Synched Slides used as a Video Component ?

Similar Messages

Maybe you are looking for