Video without audio

how can I insert a clip from the viewer to the timeline, but only the video (and not the audio)? What I do know is insert the whole clip, and then delete the audio. I think it must be a faster way to do it.
thx
Message was edited by: christian Frank

Un-target the audio tracks in the Timeline.
-DH

Similar Messages

Can i stream/see to my Apple TV any Video without Audio?

Can i stream/see to my Apple TV any Video without Audio? I mean that i want see any video on Apple TV, and listen a sound on my iPhone via headphones. How i can do that? Think that this function can be very interesting for everyone.
Thanks

Unfortunately that isn't possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

How can I get FCP to just send the video (without audio) from the viewer?

Is there a way to select only the video portion of a clip when sending it from the viewer to the timeline? Currently I am taking the whole clip, de-linking the video from audio and then deleting the audio - not exactly the fastest workflow.

Neil - Thanks for the suggestion but I am a bit more confused now but perhaps I wasn't as clear as I could be either. I am trying to drag clips into the timeline and superimpose them over other clips and I want to be able to drag only the audio or the video from the viewer to the timeline. Is this possible?

How to drag only video without audio

I'm having trouble figuring out how to drag video from the Browser to the Timeline without the audio...I keep having to drag the video to my timeline and then deleting the audio tracks...does anyone know if there is a way to drag it to the timeline without the attached audio? I am editing a music video, that is why I do not need from the video clips. Thanks for your help guys!

Here's the section in the manual: http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=9%26 section=3%26tasks=true
Scroll down to the section on Editing Controls.
-DH

How can I record video without sound?

I would like to record videos without audio on my iphone? Is their a way to record videos without sound in the default camera app? If not than does any one know of any apps that can?

Do you happen to have your phone set for mute? Apparently (with the Note 3) this would also mute recording of sound in videos. Using normal recording mode? Slow mo and other modes may not record sound either.

Capturing video-no audio

Hey all,
How can I capture just video without audio?
Thanks a lot.

Using FCE you can't. There is no internal on/off settings.
You could use a converter and not connect the audio. Quality will take a hit though.
Thing is, even if you capture the audio, you do not have to edit it into the Timeline. You simply tell FCE not to use audio. This only applies to editing, not capture.
Al

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

How to add an image to an imovie 9.0.4 video without stopping the video or audio

I am creating a video in iMovie 9.0.4 and I would like to add images to my video without interrupting the audio. I read online about a Cutaway option but when I followed the directions I was not given an cutaway option. Is there a way to do this?
Thanks!

Hi
Did You turn on Advanced Tools ?
First Choise possibly - Visa avancerade verktyg / Show advanced tools
TimeLine set to show ONE ROW of Clips.
Then take a photo (.jpg) and drop it ON TOP OF the Clip in TimeLine where You want it to be.
Now You should get a drop down Menu - Select Cutaway.
Done
in iMovie'13 (version 10.0.x) this is very different !
Yours Bengt W

When I drag a synchonised clip to timeline, can I turn off the video's audio track only without breaking apart clips?

I have preparred many clips by synchonising them with audio recorded on H4N - and have these in keywords.
When I drag them to the timeline, do I have to break apart each clip item to turn off the video's audio track or is there a shortcut to doing this?

For each clip you can go to the audio portion of inspector and uncheck/disable the tracks you don't desire. That would take longer than Tom's method, but I think the audio won't show up as a blank later on.

Sony DCR-DVD505 Handycam: Unable to get video clips, audio

Evaluating Adobe Premier. Hopefully helpful for other Sony DCR-DVD505 users.
Objectives:
1) Get videos from Sony DCR-DVD505 handycam into Premier Elements
2) Drag and drop various clips into Sceneline
3) Insert menu markers
4) Burn DVD
Stuck in Step 1, getting video from handycam, unable to get video clips (with audio)
First Try: NO AUDIO.
The Sony DCR-DVD505 burns a mini-DVD (1.4 GB) while recording. After "finalizing" the disk, the media may be imported into the computer. Streaming was supported by Windows XP driver but is no longer supported in Windows Vista. In fact, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD drive! So downgraded to Vista SP1 and used the Sony Picture Motion Browser to import media into computer as MPG files. Each MPG file is a clip (corresponding exactly to camera record on-off sequence while shooting). Then opened up Adobe Premier Elements 8. Used get media to import all the MPG clips into "Organize". Dragged and dropped various clips...inserted a menu or two and...burned the DVD. PROBLEM: VIDEO OK, BUT NO AUDIO(?!). The MPG files on computer play fine (with audio) inside Windows Media Players. Read all sorts of nonsense about why Adobe Premier (probably old versions) cannot work with "low-quality/compressed" MPG and needs to be a particular type AVI soo....
Second Try: Capture VOB directly
Forget the camera. Insert the mini-DVD directly into computer DVD drive, create a new project and followed directions from "Lowdown on VOB" http://forums.adobe.com/message/2117743 and "tools to convert to DVI" http://forums.adobe.com/thread/415317. I loaded the VOB directly and dropped them into Timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and is neither needed).
However, File > Export is always GREYED out (unusable). And the status at bottom right seems to be looping on "Background Rendering". DO I WAIT? In any case, the whole video is showing up as a single continuous stream and what I want are the clips from the camera?!
Then I tried Prism (again as per the second forum post mentioned above). It simply did something to process 30 minutes of video and crashed in the end without explanation - saying there was an error in conversion.
Is this AVI conversion even a good idea? How would I get my clips back??
Bottomline. My mini-DVD and imported MPGs plays fine in Windows Media Player. However unable to extract the camera clips (with audio).

Dawg, I have the Sony DCR-DVD305, and have been using it successfully for quite a while with PE7, with few issues, once I had a workflow nailed down.
I believe the 505 is basically the same camera, with some additional features.
This workflow worked for me in the past so I'll pass that along:
Sony Browser to PC as Mpeg.
Mpeg to Windows Movie Maker, output to DV-AVI, taking default settings.
DV-AVI imported into PE7.
This should also work for PE8.
Upon getting Cyberlinks PowerDirector v7, my new workflow changed to this:
I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
I then load this DV-AVI into PE7.
(PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
Other options to try:
Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
Or load the VOB or Mpeg into PE, then use that to convert to AVI.
(Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
Post results, if any of this works for you...
Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

How can i transfer videos without losing the sound to my iPhone 3G?

Hi
I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
How can i transfer videos without losing the sound to my iPhone 3G?

One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
http://www.apple.com/iphone/specs.html
What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
There's software out there that might make this easier for you but I can't recommend anything specifically.

Cutting and saving individual video and audio files from a clip

I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

Without knowing more about your project, it's hard to even guess at the most efficient workflow.
Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
Good luck.
Russ

What do I need to transfer video and audio from my 2009 Macbook to my television?

I want to watch a movie with my family tonight, but the DVD is broken. I was planning on renting the movie online and transferring the video and audio from my Macbook to the television. What cables will I need to accomplish this? Also, does anyone know, were I to use a Windows instead, would transferring the audio be simpler? (And what would I need to do that?)

Try doing it without a cable!
Use AirDrop, described here:
http://support.apple.com/kb/HT4783
UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
Message was edited by: sberman

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

B Roll without Audio

ok you know how you have some B roll that you want to superimpose over the main video right? but you don't want the audio to come over with it. is there anyway to post only video without the audio without it bumping your other audio tracks around?

I'd turn the audio WAY down...but leave it audible, if possible. Because when you see something, but don't hear it? You're mind gets distracted like, "why can't I hear that?" But, if it is just wind noise, or there are people talking behind the camera or other audio that doesn't pertain to the b-roll...nix it. And think about adding SFX for that later....if your mind gets distracted.
Shane

Video without audio

Similar Messages

Maybe you are looking for