Video won`t fit window

Hi, newbie here.
I am editing some footage shot on HDV cam, captured onto my MBP. Capture settings i chose as seen in the picture capturesettings. My problem is that the video turns out as a small square in the center, both when editing and exported to .mov and .flv (se second pic)
CAn anyone please give me a hint on where I shold look to fix this. I want the video of course to fill the entire window.
Thanks for any help
Terjemk

Hi
I tried to capture it as HDV but didnt get that to work. As I capture it says DVout on my camera.
Here are the properties of the captured clip
File Path: /Brukere/Terje/Dokumenter/AddictologiAkademiet/Video/WebClipAddictologiAkademiet/WebClip. mov
Type: QuickTime Movie
File Size: 2,7 GB
Image Size: 720 x 576
Pixel Depth: 24
Frame Rate: 25,00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:12:35:09
Average Data Rate: 3,6 MB / second
Pixel Aspect Ratio: 1,4587
QuickTime Details:
Movie contains 1 video track(s), 1 audio track(s) and 1 timecode track(s).
Video:
There are 18886 frames with a duration of 1/25th.
Video track 1:
Duration is 0:12:35:09
Average frame rate is 25,01 fps
Video track 1 contains 1 type(s) of video data:
Video data block #1:
Frame Size = 720 x 576
Compressor = DV - PAL (16:9)
Quality = Normal (3,00)
Temporal = Normal (3,00)
Audio:
Audio track 1 contains 1 type(s) of audio data:
Audio data block #1:
Format = 16 bit - Stereo
Rate = 48000 Hz
Compressor = 16-bit Little Endian
Timecode:
Timecode track 1 contains 1 type(s) of data:
Timecode data block #1:
Start Time = 00;40;51;16
Reel name = ExtraDag

Similar Messages

Video won't fit perfectly on screen?

http://uploadimage.tk/?v=screenipi.gif
Why does it do that?
(The September Random Music Mix image won't fit perfectly.)

What are the EXACT video settings, and what project preset are you using?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0

You Tube videos won't play Windows 8.1, Shockwave Flash, HTML5, updated

I have tried in Firefox, Explorer and Chrome. It doesn't work in any of them using shockwave flash or HTML 5. I did get HTML 5 to work for a little bit but nothing at all is working now. I have a new ASUS computer running Windows 8.1. I installed Cyberlink software which installed Quicktime and I wonder if that has something to do with it.

Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. [[Image:fpSettings1.PNG]] 
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Youtube Flash videos won't play (Windows 7 64 bit)

I cannot get YouTube and other web videos to play on my new Windows 7 64 bit computer. I have tried uninstalling Adobe Flash Player, and downloaded the 'square' 64 bit version of Flash Player, but it still doesn't work.

Please enable the Flash plugin under Tools: Add-ons: Plugins.

Adobe tv videos won't load, Windows 7 64 bit

I'm attempting to view the training videos for CS6 applications, and they don't load. A black box is displayed where the video should play. This happens under the latest versions of all of these browsers: IE, Chrome, Opera, and Firefox. I made sure I have the latest versions of Flash and Air (3.2) installed. I have no problem viewing Flash videos on other sites.
Any ideas?
Ron

I've just recently had this problem. After 10 hours of trying to fix it (no help from Adobe!) I found the answer. It seems that at sometime a flashplayer update deleted the settings for Adobe TV. Since I didn't know anything about these settings I started from scratch. Heres what I did:
1. First BACKUP YOUR SYSTEM !!!!!
2. Completely uninstall the flashplayer. TIP: Google for the official Adobe uninstaller.
3. Uninstall Photoshop Elemernts. TIP: The uninstall procedure is on the Photoshop Elements install disc. Start a new install and it will uninstall your old one. Stop after the uninstallation step.
4. Download and install the latest flashplayer.
5. Reinstall Photoshop Elements.
6. Reboot system and test Adobe TV.
YMMV. Good Luck!

Videos won't work on windows vista beta 2

Ok i Have windows vista beta 2 and most of my itunes work fine but videos won't show up, even when i bought one it dident show up, and that is really weird because everything works fine on my laptop with itunes and windows vista beta 2.Why won't it work? if someone can help me that would be great
Other OS

If you want a success then download movie trailers from Apple's QuickTime site and convert them using QuickTime for the iPod.
The new King Kong trailer is available in iPod format and looks stunning.
I put together a guide for converting movies to the iPod:
sehested, "Tutorial: How to get DVD's on your iPod", 12:50pm Nov 8, 2005 CDT

Ipad videos won't play right on my Windows 7 desktop

I'm copying home videos from Ipad to Windows 7 Home Premium desktop to store and free up space on Ipad. The Videos play perfectly when I view them on Ipad. They don't play correctly on desktop, they freeze and jump frames, don't play continuously. I've tried copy and import, and even one at time. It's not memory issue, have 8 G. When I copy to my Windows 7 Home Premium laptop, they play perfectly also. What could be causing the problem with desktop?

Try downloading and using quicktime.
It could be something as easy as the graphics card or the desktop not having the right plugins to play the iPad files smoothly. Quicktime is the best program to play mov files, that's what it's made for.
It's a free program so you're not out anything but time

Videos won't play in powerpoint when connected to projector

I've tried to find a solution for my problem online but haven't come across anyone with the same issue. I often work with powerpoint presentations with many videos in it. The videos play just fine on my laptop and also when hooked up to an external monitor, which I use when at work, both in slideshow mode and when previewing my animations. However, when I hook up my mac onto a projector the videos won't play - not on my laptop screen nor on the projected screen. I've tried rearranging the displays by draggin the menu bar to either display and also switched from mirror screens to presenter's view within powerpoint but nothing helped solve the issue. The only solution I found is to play the presentation on my windows partition - which is not really what I'm planning to do for long term...
I'm using Powerpoint 2011 for mac and this problem has occurred using multiple projectors.
Any help on how to solve this issue is highly appreciated!

I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
Here what I figured out so far:
1. It happens when you have PPT open and connect to beamer afterwards
2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
So in short: Connect to beamer first, then launch PPT
I know it is only a symptom fix but it worked for me

Videos won't play in any browser

Just recently, videos won't play in any browser...Safari, Firefox. etc. It seems to happen with .wmv files. I reinstalled media player, but still have the problem.
I get this message.
"Cannot open the file. Verify that the path and filename are correct and try again"

First, check that Windows Media Player is set as the correct plug in - in Safari, go to help/installed plug ins. There should be a section marked 'Windows Media Player' showing 'application/x-mplayer2' and listing wmv files (amongst others).
Sometimes these arrors are caused by DNS failures. Ensure your system is fully up to date, and enter your ISP's DNS server IP addresses (usually two of them, sometimes three) in the 'DNS servers' box on the TCP page of the Network preference pane.
The DNS server IPs are usually supplied with the ISP's initial set up documentation, or located on the ISP's help page.
The reason it could be a problem is that in many iterations of MacOS X, the system is extremely sensitive to how quickly a DNS search responds. DNS is the process whereby a user-provided URL is converted into the correct IP address for internet lookup, so if the video source is held on a different server and the DNS process doesn't return a valid IP address in time, you would then get an error of the sort you describe.

MailOnline videos won't play in Firefox unless in safe mode although they're fine in Explorer.

It's for my mum, honest. Firefox 25, java and flash uptodate but the Mail Online videos won't play unless I start Firefox in safemode. A large white rectangle appears but nothing else.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Have reset Firefox & completed all of steps in "Flash video won't play full screen on YouTube, Facebook and other websites", but video still won't work. Help!

I have reset Firefox, completed all the steps in "flash video won't play full screen on YouTube, Facebook and other websites". And the video still won't play in full screen. It will play, but frequently stops or sound continues and picture freezes. I have noticed that if I continually move my mouse, it plays fine. All these videos play fine in IE and Chrome.

Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. [[Image:fpSettings1.PNG]] 
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Need to play video inside forms applet window

Hi,
I need to call a video inside oracle forms (10g), This can be acheived through Client_host() or by web.show_document. But the problem is that both methods opens the video in new browser window. Where as my target is to play the video inside specific frame of forms. I hope this is possible through java beans. Can anybody suggest a solution for this?
Regards,
Naveed

Hello,
Here is one Java Bean
It needs the Sun Java plug-in, so it won't work with the JInitiator.
Francois

One hour 25 minutes won't fit on a single layer

Hey People,
Using Toast 7, I get the error that 1:25 min. won't fit on a single layer Verbatim. ???
It is an export from FCE with lots of editing if that makes a difference.
iDVD is not much use; it spits out blank disks during multiplexing stage but pretends to keep burning,
a common problem I know but I have never been able to fix it.
Thanks for any insight,
Al

Hi
This is my notes on first part - From FC to iDVD (or Toast™)
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Burn won't fit - is it minutes or MB's?

I'm getting the message that my songs won't fit on one CD. There are 55 songs (actually spoken word) 1.5 hours, 482 MB. The CD is 80 min, 700 MB. Is it the minutes or the MB that is important? 482 MB should fit easily.
Dell Precision 340 Windows XP Pro iTunes 7.0.0.70

Its where your burning an audio CD.
All your songs/books are in either MP3 or AAC both being compressed formats. When a program gets ready to burn an audio CD, it has to uncompress the song(s) and burn them in a uncompressed format so a regular CD player can read it.
So the 400 and something MB COMPRESSED files when uncompressed are MUCH larger. If you look at the blank CD or the case it came in, it will tell you how many minutes of music it can hold on average. I THINK most 700MB CDs hold 80min worth of audio

PE8 Questio - video won't run if I press Start

I have PE8, and deactivated on one machine & installed it on a windows 7 system. If I import a video and try to start it nothing happens. I can move slide bar to see and can edit and save for IPOD but video won't advance when I press start. Any idea what is wrong? Tx.

>import a video
What KIND of video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Video won`t fit window

Similar Messages

Maybe you are looking for