Videoglide video in another program

I have a piece of software that captures video using Quicktime from a camera with S-Video output. I also have a USB capture cable that I would like to use with a new computer that does not have S-Video inputs. I don't want to give up my one Firewire port if I can avoid doing so. I plan to use this port to directly connect two computers, so I don't think I can daisy-chain it, either. I downloaded a test version of Videoglide, which displays video through the capture cable but does not allow it to display in the third party software. I don't know if this is just a limitation of the demo version or a sign that this solution will not work. Will the full version of Videoglide create a source that can be used by other applications, or is there another way to make this happen?

Hi ,
I think you can use the ABAP memory or the SAP memory for this.
ie use the SET / GET parameter commands.
Check the help in abap program for syntax.
Regards,
Sunmit

Similar Messages

Is there a way to import my STD quality video without converting it with another program?

I understand how to import the HD quality video through imovie, but cannot seem to import the STD quality video without first converting it through another program? Anyone know how to do it without the cumbersome converting process? Thanks.

What kind of camcorder did you use to shoot the video?
If you aren't sure, will the STD quality video play in QuickTime Player? If so, click Command-I to open the Inspector and tell us everything listed by the word FORMAT: as well as the dimensions of the clip. (Instead of Command-I you could alternatively click WINDOW/INSPECTOR.)

Webcam being used by another program/Other Person ...

Okay, here's the problem. I just bought a new windows 7 PC and it came preinstaled with Skype. I tested the webcam and everything seemed fine. Then we got a video call from someone that uses an ipod and the video wouldn't work. I looked and it said that my webcam could not be used because another program must be using it. Only thing is, NO OTHER PROGRAMS ARE RUNNING. Not even Explorer or Firefox.
So I decided to do some testing. First I tried downloading it on my Android phone to make sure it wasn't related to an iphone/ipod problem, still doesn't work. Then I double checked to make sure my drivers and software were all updated. Everything is up to date. Then I disabled auto-sign-in on startup in case skype was loading before my webcam driver was, still nothing.Then I tried running in compatability mode for windows xp, Skype freezes and wont even start. Now I'm officially out of ideas
So to sum it up. When I start skype, and go to video, my webcam will work, but as soon as someone tries calling, they can't see any video. I'll list all my stats below. This is very frustrating because this is the same webcam that I was using on an older computer that recently gave me problems, so I bought an entirely new computer and it works great, but now skype won't work. Why can't this stuff ever be simple?
Windows 7 64bit.
AMD DUAL CORE 1.3ghz processor
4 GB of RAM
Skype 5.9
Webcam Logitech c110
Webcam is designed to work with windows 7
Webcam software and drivers are all up-to-date
Webcam worked with Skype on windows XP just a week ago
Webcam works with other programs NONE OF WHICH are ever running in the background. Double, no Tripled checked. No messenger, Oovoo, Explorer, Firefox, Yahoo, or anything.
Does anyone have ANY ideas? This is really important to me. We recently moved out of state and this is the only way we can see my family. Thank you in advance for any help.

I am also having the same subject problem. When I go to Tools->Options->Video settings the video stream is OK. So what interfering software is running during a video call that is not running when I check the video settings? I have included some thoughts and observations below.
My webcam device name in Windows is: USB Video Device. The OS is Windows XP Pro SP3. SKYPE version is 5.9.0.115. Webcam is Logitech C210 and I am using the Microsoft USB video device driver, not the Logitech drivers. I have uninstalled the other Logitech software a long time ago.
When I open My Computer in Windows and click on “USB Video Device” the USB Video Device window opens with webcam preview video displayed as long as no other programs are using the webcam. If SKYPE is running and producing video (Tools->Options->Video settings), instead of good video displayed on the USB Video Device window I get the Windows video error message shown below.
Windows video error message:
window title: Video Preview Failure.
“Creation of the video preview failed.
Please check the device connection and make sure that the device is not being used by another application or user.”
Similarly, If I start SKYPE (Tools->Options->Video settings)with no other programs running that use the webcam I get good video. However, if I start the Windows USB Video Device preview video before I start the SKYPE video, I get the SKYPE video error message shown below that indicates that SKYPE can’t start the video.
SKYPE video error message:
Black window with white exclamation point in red circle.
“Can’t start video. Try closing other programs that might be using your webcam.”
While this little experiment is completely expected, I have been getting the SKYPE video error message when I try to make video calls. Just before the call, Tools->Options->Video settings results in a good, solid video stream. During the call I can see and hear my contact but my contact can only hear me. The SKYPE video error message appears. The webcam icon shows a red diagonal line through it. My contact can very briefly see me when I click on the webcam icon temporarily removing the red diagonal line. But then SKYPE returns to the error state.
As far as I could tell no other applications were running that could conflict with SKYPE and result in this error condition! Does anyone have any additional suggestions for identifying the interfering software or application? Or is there some other reason this particular SKYPE video error message occurs?
Thanks in advance for any suggestions.
P.S.: It’s too bad the SKYPE program can’t provide some diagnostic clue to help the user identify the offending application software.

How to get Adobe Bridge CS5 to open an FLV file in another program?

Hello Folks,
How do I get Adobe Bridge CS5 to open an FLV file in another program other than Flash CS5?
When I double click on an FLV video, it always opens Flash CS5. I want to be able to use one of my other FLV player apps instead.
Thanks

How do I get Adobe Bridge CS5 to open an FLV file in another program other
than Flash CS5?
When I double click on an FLV video, it always opens Flash CS5. I want to be
able to use one of my other FLV player apps instead.
For single use when having pointed the cursor on that file with right mouse
click choose open with and choose the wished application from the fly out
menu.
For permanent use go to Bridge Preferences File Type Association section and
from the list find the .flv file extension. In this line you can select the
little triangle next to Adobe flash and from the list select the one you
prefer, now the all open in this chosen app.

Calling another program

Is it possible to call another program (vlc media player in my case) in a VI???I dont want to use the Active X control for playin videos as it does not have much playback functions...

Use the System exec.vi to launch any executable from LabVIEW in your case VLC player. Provide the required inputs path, command line args so that you can obtain the desired functionality.
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved.

Does Camera Raw come with CC or another program?

Does Camera Raw come with CC or another program? I don't see it in the options.

Camera Raw is not a program, it is a plug-in/ extension for Photoshop, Bridge and other programs that latch onto this like when importing Raw files in video apps.
Mylenium

Is there another program instead of quicktime that u can import movies

is there another program instead of quicktime that u can import movies to ur ipod?

hey aechick,
u can do without quicktime to convert videos of any format to mp4...
goto this link : http://www.download.com/Free-iPod-Video-Converter/3640-21944-10498771.html?tag=tabur
its one of the numerous file convertin' software.....i use videora though...u cud do a google on it..
lemme know if it works aye cheers
sam
Windows XP ipod 60 GB video

How do I reinstall Adobe Acrobat XI Pro from the Creative Cloud? I was deleting another program and accidently deleted Acrobat.

How do I reinstall Adobe Acrobat XI Pro from the Creative Cloud? I was deleting another program and accidently deleted Acrobat.

Sweetmelissa63 for information on how to reinstall Adobe Acrobat XI Professional please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

I have a fully paid subscription to CC and use of installed programs but I can no longer sign in to CC. It repeatedly says "You've been signed out". I have the need to install another program but I can't sign in.

I have a fully paid subscription to CC and use of installed programs but I can no longer sign in to CC. It repeatedly says "You've been signed out". I have the need to install another program but I can't sign in.

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Photoshop won't start: Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file.

Adobe Photoshop CS6 Extended
"Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file."
I've tried finding and checking and fixing permissions but no success.
This happened from one day to the next. I think it has to do with the sn attached to the disk rather then the motherboard. I have the suite co-installed with Symphony 5.05. I've tried reinstalling.
What's to b done? The rest of the Creative Suite 6 (AE, AI etc.) works fine.
Anyone...?
Loui

Have you tried restoring the Preferences yet?

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How to call an alv report from another program and return back

     Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      EXPORTING LIST TO MEMORY
                      AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
Seema

Hi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
         line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
   SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
   AND RETURN.
   CALL FUNCTION 'LIST_FROM_MEMORY'
        TABLES
             listobject = t_listobject
        EXCEPTIONS
             not_found = 1
             OTHERS     = 2.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ELSE.
     CALL FUNCTION 'LIST_TO_ASCI'
*     EXPORTING
*       LIST_INDEX               = -1
*       WITH_LINE_BREAK          = ' '
       TABLES
         listasci                 = t_ascilist
         listobject               = t_listobject
       EXCEPTIONS
         empty_list               = 1
         list_index_invalid       = 2
         OTHERS                   = 3.
     IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
     ELSE.
       WRITE:/ 'Below are the lines from the submitted program.'.
       LOOP AT t_ascilist.
         WRITE:/ t_ascilist-line.
       ENDLOOP.
       SKIP 2.
     ENDIF.
   ENDIF.
   IMPORT t_mara FROM MEMORY ID 'T_MARA'.
   WRITE:/
'Here is the output from the table exported from the submitted program.'
   LOOP AT t_mara.
     WRITE:/ t_mara-matnr.
   ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
       v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
         matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
                 s_maktx FOR v_maktx.
START-OF-SELECTION.
   SELECT matnr INTO TABLE t_makt
                FROM makt
               WHERE matnr IN s_matnr
                 AND maktx IN s_maktx.
if not t_makt[] is initial.
   SELECT * FROM mara
            INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
           WHERE matnr = t_makt-matnr.
endif.
   EXPORT t_mara TO MEMORY ID 'T_MARA'.
   WRITE:/ 'This list is from the submitted program'.
   SKIP 1.
   LOOP AT t_mara.
     WRITE:/ t_mara-mtart.
   ENDLOOP.
Hopes this helps you.
Thanks,
Ashok.

How to open-up a pdf file to a particular page via java? (file and page number from another program)

I have created an Access 2003 Form. Data is entered. The data can be viewed once entered in the same form format, with one addition. The addition is a link to another program where we store files. The files stored are pdf documents. Each document is a scanned file (500+ pages). The link can open-up the pdf file. I want the link to open-up the pdf file to a particular page. I will supply the page number from the database.
I am aware of Adobe Acrobat 7.0 PDF Open Parameters using a URL that specifies the file to be opened plus actions to be performed once the file is openend (i.e. http://example.org/doc.pdf#page=3). However, the 3rd party program transfers a file from a server to the client via java. The file does not go via a web browser. The java code transfer the file directly from the file server to the the client.
Any idea how to accomplish the task of viewing a particular page with the process flow described?
I am using Adobe Acrobat 7.0 Professional.

So you are reading this file in a standalone version of Acrobat? If so then use the PDF Open Parameters /a option via the command line.
Sabian
Example:
C:\Program Files\Adobe\Acrobat 7.0\Acrobat>Acrobat.exe /A "zoom=1000=OpenActions" "C:\Program Files\Adobe\Acrobat 7.0\Acrobat\SimpleSubmit.pdf"
Where:
Path to Acrobat: C:\Program Files\Adobe\Acrobat 7.0\Acrobat>Acrobat.exe
Note: The example starts in the Acrobat application directory
Switch: /A
Parameter Syntax: "zoom=1000=OpenActions"
Path to file: "C:\Program Files\Adobe\Acrobat 7.0\Acrobat\SimpleSubmit.pdf"
Note: The quotes are very important for the syntax to work appropriately.

Videoglide video in another program

Similar Messages

Maybe you are looking for