Videos and you tube take forever to load and they are freezing up

why are my videos taking a long time to load, also on you tube?

Could be a lot of reasons.  The 3 main ones are...
#1 - slow internet connection or access- Speed Test
#2 - Your Adobe Flash Player Software is out of date.
#3 Using an outdated browser or one that constantly needs TLC.

Similar Messages

  • No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

    No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
    I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Netflix, HBO Go, ABC Tv app on my apple tv take a long time to download my videos and they are choppy, how can I resolve this issue? My apple TV is running off of WiFi in my apartment.

    Netflix, HBO Go, ABC TV along with other apple TV apps, take a very long time to download the video and they are choppy when running. My apple TV runs off of WiFi in my apartment. When trying to download updates, it take a long time and then a video screen with "This Update was not Successful. Apple TV couldn't be downloaded at this time. Try again later." What can I do to resolve this issue? I purchased this apple TV in May 2013 new.

    That will be an issue with the network
    What is your current connection via speedtest.net?
    Make sure DNS is set to auto (settings - general -network)
    Since you are in an apartment the local wifi network is more prone to interference, try ethernet

  • Cant watch music videos and they are downloaded on my ipod

    for some reason i have the cover of the music video and the movies too but i cant play them only sound comes out...please help
    thanks
    morgan

    On your iPod go to "Videos / Video Settings".
    Then select "TV Out" and either set it to "off" or "ask".
    Also, make sure you are accessing the video through the videos menu. If you have a video mixed in an audio playlist and you access it through that, you also won't be able to see the video.

  • File encoded with x264 takes forever to load in Encore CS 5.5

    I use Encore mostly because it takes h.264 video encoded with the x264 compressor, which provides much higher quality than any other compressor. The problem is that these files take forever to load. For example, right now I'm trying to load a video that is about 1 hour and 20 minutes long, encoded at 38 Mbps, and the file is 20.9 GBytes. Now it's 3 PM and I imported this file along with the AC3 file over an hour ago. The Encore process shows as not responding, but when I open the Windows 7 Resource Monitor, in the disk tab it shows that it's reading the video file at a rate of about 45 MB/s, so I didn't kill the Encore process. I know eventually it's going to stop and load the file, but I don't understand why it takes so long. The encoding parameters that I used in x264 are these:
    x264 --level 4.1 --bluray-compat --preset slow --bitrate 38000 --keyint 30 --min-keyint 2 --open-gop --weightp 0 --slices 4 --vbv-bufsize 30000 --vbv-maxrate 40000 --rc-lookahead 40 --tff --output "output" "input"
    This comes from a family video that is 1080 59.94i. This time these two parameters appeared because I selected Blu-ray as the target:  --bluray-compat and --open-gop, which I don't normally use, but still, even when I don't use them, video encoded with x264 takes forever to load. Does anybody here know what could be the problem?

    What's weird is last year I encoded a file that was almost two hours long and Encore took it without trouble, although it was CS5, not 5.5. Since I had kept the avs and bat files, and also the x264.exe from that encode, I brought them into the current working folder and I just modified the file names in the avs and bat files to point to the new avi and encode to the new h264 file. So I encoded this file, I imported it into Encore, and it still hangs. Maybe it was a change from CS5 to 5.1 that introduced a problem. x264 has been certified to be Blu-ray compliant since over a year ago, and I already put this file to a Blu-ray with TSMuxer, since it was a family video and I didn't really need menus, and it plays perfectly fine in my Blu-ray player.
    But I'm sure there must be something, one or two parameters that would make it compatible. For example, after encoding the file again the last time, now I can import it into Encore, and it doesn't stay frozen forever, but it doesn't show me the video and as soon as I try to move the timeline cursor it freezes and doesn't let me do anything for several minutes. So still it's not usable. But it's a change from the first encode where the progress dialog would be there for several hours and do nothing at all.

  • I'm unable to steam flash videos in Firefox. I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slo

    I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slowly as well.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Macbook takes forever to load websites and often they won't load at all - yet my pc flies along

    macbook takes forever to load websites and often they won't load at all - yet my pc flies along
    I downloaded the Open DNS thing and I havne't got a masters degree in computers - so i haven't a clue what it does or what its supposed to do.
    Overall i'm really really sorry i bought an apple and i won't be doing it again - i just need it to access the web properly!

    When i click to 'go to video' a page opens onto eurosport but the video won't appear - there's just a blank spot on the page where it should be.
    i get some of the pictures on the page but lots of black squares where other pictures should be.
    Make sure you have the following installed:
    Flip4Mac
    VLC Media Player
    Perian
    Adobe Flash Player Software
    After the installations, repair permissions and restart your computer.
    I downloaded the Open DNS thing and I havne't got a masters degree in computers - so i haven't a clue what it does or what its supposed to do.
    Uninstall it asap.  In order to avoid damaging your system/directory which can result in costly repairs, never install software if you do not know what it does and/or you have no clue on how to use it.  If the software comes w/instructions (Read Me file), read it prior to installation.

  • Takes forever to load YouTube or anything else. Network works fine on iPad and iPhone.

    My new Apple TV takes forever to load up you tube or any content
    Using wifi.  My network is fine and all other devices have no issue
    Loading same content. I have updated the latest software
    and did not help.

    Spent 1.5 hours with a Senior Apple Advisor. Apple practically turned my iMac inside out determining nothing is wrong.  He said the key phrase to tell Verizon and earthlink is that the ping does not respond.  Ports 110 & 587 do not respond.
    1 hour with a Verizon rep who initiated a 3 way call with earthlink.
    2 hours with an earthlink person who claims the only ports to use are the ones I have.  I don't believe that.
    Problem is still not solved. 
    At this point earthlink has opened a ticket and is supposedly looking into this.  I do not have much hope of a response from them.
    Does anyone have an alternative mail client to rec'd?

  • Quicktime videos take forever to load on my system

    Is it me alone, or does anyone have the same problem? I have a excellent system, and nothing takes forever to load on it, only Quicktime videos. The only reason why I use quicktime on my XP machine is to watch the videos that are downloaded from my Kodak camera memory card since the camera saves its video files as quicktime videos, but it takes forever for the video files to load after I have downloaded them and saved them into a folder on my system. When I want to go back and view the videos, the folder freezes until all the videos, even if it is only one video in the folder loads. Why is that? Other video files load immediatley from avi,wmv,to divx,etc.
    Does anybody have a solution?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • My I phone 4 will boot me out of a web site and there are time when it just shuts down on its own,also it take forever to load my game. What would cause these issues?

    My I phone 4 will take forever to load a game, boot me out of a web site and sometimes shut down on its own. What would cause these issues

    Hello Jake69529,
    The following article details some useful troulbeshooting that can help get your iPhone's apps stabilized.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Cheers,
    Allen

  • Facebook games take forever to load and all 'items' never show on screen

    i have updated to Firefox (safe mode), have updated flash player and have gone through pages and pages of help articles, but any and all of my facebook games (farmville, petville, farmtown, etc.) take forever to load and after loaded move extremely slowly AND never load fully. Only 1/10 of actual "items" ever load. When I click on the normal things I have to "perform" when playing the game, it takes effect minutes later, never immediately as normal and buildings, gifts, etc., never let me use them at all.....

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My hp notebook 2000 takes forever to load and turn on, moves slow and sometimes cut off

    My pc takes forever to load, runs super slow and cuts off occasionally. I constantly have to recover it and that still don't seem to change a thing... is there anything else i can do to make my pc run the way it used too. I just bought it from Wal-Mart brand new last year August. I don't have music or movies or anything downloaded to it so I don't understand what's going on with it. Please help.

    Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hard drive & memory.
    If you don't have these options in BIOS you should have System Diagnostics accessed immediately after powering on the laptop by tapping the F2 key.
    You have a 1 year warranty. Phone HP Support for service.800-474-6836
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Calendar and reminders take forever to load with ios5

    Since I upgraded my iPhone 4 to ios 5, my calendar and reminders take forever to load. Sometimes they crash rather than load. Any suggestions? This is extremely frustrating. By the time they load, I forget what I was going to write. Even once they open and I start entering data, they usually stall or crash during the time I am entering information (e.g. setting alerts), so it takes a very long time to enter each appointment or reminder. Help please!

    I'm having the same issue.  Ay fixes?  Bought ATV today, music streams but videos don't and mirroring doesn't work either.  Start mirror and severe lag then just drops.  Been trying for couple hours. About ready to return it.

  • Devices and Printers Menu takes forever to load

    Devices and Printers Menu takes forever to load in WIndows 8.1.
    For some reason the green bar goes all the way across the top of the screen before the devices and printers
    menu will load. It then loads without an issue after waiting for almost two full minutes.
    This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise. 
    I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices
    and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia
    devices" on the network than does windows 7.
    I have tried accessing the menu from safe mode both with and without networking and it takes just as long
    to load.
    I have noticed that most of the devices in Devices and Printers also show up in file explorer under network.
     There is however no delay accessing that menu.
    I don't really have a good feeling as to how to go about troubleshooting from here?

    Hi,
    For the issue, it seems one of services related to device stopped.
    I suggest you check the services to see if they start.
    Please refer to the following link:
    http://techietalkz.com/2009/10/02/how-to-solve-windows-7-devices-and-printers-forever-loading-and-blank/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We can try testing if the method in Windows 7 can work on Windows 8.1 computer.
    If it doesn't work, I suggest you remove all device to test it.
    Meanwhile, let us try SFC tool to check the result.
    Use the System File Checker tool to repair missing or corrupted system files:
    http://support.microsoft.com/kb/929833
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Just updated to iOS 6 for iPhone, and now Yahoo takes forever to load.

    Help! I updated my iPhone 4 to iOS 6 and now my Yahoo mail either takes forever to load, or never loads at all. Both receiving and sending are sketchy and go at a snail's pace.
    I've scoured the Internet and tried all the fixes - deleted account and added again (multiple times), restarted phone, added yahoo account as "other", logged in from a computer, turned off iCloud...
    It's driving me bonkers... What am I missing? Yahoo mail still works fine on my iPad, which is running the older iOS.
    Heeeeeelp!

    iOS: Not responding or does not turn on
    Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is the thing to do

Maybe you are looking for

  • Oracle Connectivity in JSP using Tomcat 4

    Dear friends, After installing and configuring the Tomcat 4 I am able to run JSP and Servlats. But I am unable to connect to Oracle database (oracle 8i) using thin driver. Sample code is : <html> <head><title>Test JSP-JDBC</title></head><body> <%@ pa

  • Change of Search help for location field in report incident

    Hi All,          i have added new fields Region,BSA in the report incident form .here based on the region entered in the search help the corresponding bsa have to be displayed in the search help of BSA .these are achieved customising  the search help

  • The Query output should bring 0 from 0 records

    Hi Guru's      I have a critical requirment in my project, I have to build an query on BW statistics  Multi provider ( 0BWTC_C10 ).        The Query should result an output with an exception when any data load brings 0 from 0 records to the info prov

  • Any way to refresh the calendar?

    iPhone 3G with MS Exchange Email, Contacts & Calendars set to manual fetch ... In my mail Inbox, I can press the refresh button in the lower left to update the Inbox. Is there any way to do this in Calendar (other than changing my Fetch settings) or

  • Add ramp in a certain way...

    hi guys, i have a question about ramp... look at this image i want to add to this image a ramp effect starting from the center to the bottom, the start colour must be like the center and gradually become black at the bottom... but must looks like all