Videos are SLOW to load

I just downloaded the most recent version of safari (beta 3) and videos posted on websites are still EXTREMELY slow to load. Are there any updates that would help make the videos load quicker or is it caused by limited space on the hard drive? Any comments/answers would be helpful. Thanks!
E

Were you able to confirm any suspicions the browser could be at fault
(or not) by trying to download the same video content through a different
browser with current proper plugins, and etc?
The speed of the internet connection is among prime things to confirm
and consider when awaiting slow internet content downloads. Also, all
system performance can be affected by insufficient hard drive freespace
or flex-space for the applications and for use as virtual memory.
The actual download speed of a file may vary through a combination of
several influences or conditions within and from without the computer.

Similar Messages

  • Pages are slow to load or stop loading

    Once I'm connected to wi-fi, my pages are slow to load or stop loading and tell me 'I'm not connected".

    If you are having the problem on more than one computer it would appear not to be a computer fault or your browser that is the problem.
    The first thing I would do is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This can often sort out problems and will also give you a "clean sheet" to start some diagnostics from.
    If this doesn't help please post what Infinity package you are on, I assume with 18Mbps it's Infinity 1 but please confirm, and do you have an Openreach modem and what homehub you have.
    Also run this checker and post back a screen shot of the results
    http://www.dslchecker.bt.com/adsl/adslchecker.welc​ome
    and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
    http://speedtest.btwholesale.com/

  • Contacts are slow to load and scroll, 5 second delay or longer!

    Contacts are slow to load and scroll, 5 second delay or longer! Im very frustrated with my iphone 3g! Contacts are so slow I cant believe it. Also the time it takes to go from contacts to the home screen is slow. Whats the fix? HELP~!

    I've also seen the delay - ever since I got my 3G phone. Update 2.0.1 was said to help this, but I think it's more affected by apps on the system, and how often you turn the phone off. Still not enough to really bother me, but wish it was faster. Hopefully another update will help. I'm sure it doesn't help that I have 2 different email accounts (1 is pretty big, lots of data ) and the fact I have almost 1000 contacts in mine.

  • Reports that are slow to load

    I am adding a report in my project at the vb.net 2005 but they are slow to load. What is the best way to do this task to be loaded into faster?.
    I am using the Crystal Report version 2008 with Visual Studio.Net 2005 in a Windows application.
    The evidence I have done so much in development environment as user stations, in both situations the burden of reporting slow.
    I am adding the reports through a Crystal Report Viewer
    Very thanks and greetings from Costa Rica.

    Look at where and as I put the code Ludek
    Private Sub Frm_Reporte1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
            Dim Reporte As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
            Reporte.Load("
    glauco\Reportes\Ventas 08\Vta - Sugerido Pedidos.rpt")
        End Sub
    However, the form still takes 6 seconds to load and reporting over 2 seconds.
    I said, I'm only using a CrystalReportViewer in which I have directed the report from the server by selecting Properties from the menu ReporSource of CrystalReportViewer.
    Do not know if this will have something to do. Honestly, I have worried about this situation because I have everything ready to take the project as soon as possible.
    Again, thank you very helpful.

  • Why are YouTube videos so slow to load?

    Hi Gang,
    I've been greatly enjoying the Pismo I totally revamped with help from JPL and Cornelius. It's now faster than my G4 12". But Youtube videos are painfully slow to load. If they finally do load, the motion is usually quite jerky and out of sync. Just tried three different videos on the Salon site and none of them would load. This is not the case with other videos (QuickTime or RealPlayer). Is this a hardware, software or site problem, and is there anything I can do about it? Thanks for any insight you can give.

    GB:
    I am able to watch streaming video on my Pismo, but I can't be doing much else on the computer. However, I don't do YouTube and I don't know how that will work. But I do watch news clips or streaming video from CNN, for example. I watch it the default size, and it is fine, with a little problem with video/sound synchronization. Streaming video works a lot better for me with Real Play, though. Almost perfect even with their max size. That is true even on my wife's Pismo with a regular 500 MHz processor and 640 MB of RAM.
    I agree with Jon and jpl on the video card limitation. To the best of my knowledge it can not be upgraded.
    Cheers
    cornelius

  • Youtube videos VERY slow to load

    Has any one else out there had a problem with getting youtube videos to load. My desktop downloads youtube videos in Miliseconds, while the apple tv takes two minutes to download the same thing! We are all wired up, so no wireless problems. Podcasts and movies stream very quickly, just a problem with youtube. Does any one know if the videos are directly downloaded from youtube or do they go through apple servers of some type? I am flustered. Already returned one unit to the store for an exchange.
    HELP!

    I worked with fuji master on this issue and have resolved it, sort of... Fuji's original 160GB AppleTV exhibited the symptom he described on several different WAN connections, although all were Portland Comcast.
    Surprisingly, every 160GB (shipped with take 2) unit we tried had the same symptom but the 40GB models operated perfectly (on the same LAN and WAN). The 40GB was running the same version of the take 2 firmware as the 160GBs and all had been restored prior to testing. I am at a loss to explain how this could be a hardware-specific issue with YouTube, but my best guess is that some incompatibility existed between 160GB AppleTVs and YouTube.
    Today, we configured and tested a new 160GB AppleTV (a firmware update occurred since previous testing) on the same network and YouTube loaded and operated normally.

  • Facebook videos and pictures are slow to load

    I am reading in the forums this is a common issue right now. I have done the change to IVP6 off and cleared caches. This is still there. From reading people on this forum this is a uverse system issue. If I access from a non-uverse connection there is no problem. please help

    Same issue. When I called in I was made to sound stupid and that it was facebooks fault. Common call center crap to get you off the phone, it was probably one of there many outsourced centers. This is a real problem though that looks to be ignored.

  • Some videos are not being loaded onto my Ipod

    Hello everyone!
    I have had around 10 iPods in the past, and I am yet to have one that does not have a problem. My last two, however, I am beginning to believe have to do with iTunes. Only 6 of my t.v. episodes load onto my iPod when I update it. I have purchased all of these off of iTunes. I have also lost access to around 3 of my videos all together. Is there a way to retrieve them?
    Thank you for reading,
    Mike

    So all of the t.v. shows are in iTunes, but they won't copy over/sync up to your iPod? Am I understanding you correctly? Maybe what is happening is this. Check your settings for syncing tv shows and see if you have selected to sync "all unwatched" episodes. If you've watched them in itunes before syncing, then they won't get put on your ipod. I can't tell you what the other settings may be as I've got my ipod in "manually manage music and videos" and if I switch it over right now, I'll loose everything on the iPod. Just look at your various options in those drop down boxes and see what fits your situation best.

  • Web pages are slow to load

    I have a pretty good but basic understanding of web site
    management but have discovered during testing that some of my sites
    are pretty slow to respond. I understand how to set image densities
    to 72ppi for monitor display and have been pretty consciencous
    about that, but I'm finding that certain sites I have built are
    still slow in spite of my best efforts.
    Obviously there are some techniques I could use a little
    education on.
    Without getting too exotic, are there some simple, common
    practices designers use to help the load speed of web pages?
    I'm using simple html (no dynamics) and are just dealing with
    text and images.
    If you need to see an example, this site's homepage sometimes
    can take a bit to load. I did say "sometimes" so obviously not all
    the loading issues are design related. PLEASE note this is a PG-13
    site (no porn or anything too bad; just adult humor and comment).
    http://home.comcast.net/~buckanddusty/
    Thanks
    Tom

    That particular page is 257K. As such, it will take about 60
    seconds to
    completely load when accessed on a 56k dialup connection.
    There is no magic
    about this effort to minimize this loading time -
    1. Use as few images as you can
    2. Those images that you use should be no larger
    (dimensionally) than the
    smallest you can get away with to deliver the look/message
    3. Those images that you use should be optimized (by reducing
    their
    quality) until they are almost unacceptable
    That is about all you can do.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "TCarp" <[email protected]> wrote in message
    news:flg06k$5j2$[email protected]..
    >I have a pretty good but basic understanding of web site
    management but
    >have
    > discovered during testing that some of my sites are
    pretty slow to
    > respond. I
    > understand how to set image densities to 72ppi for
    monitor display and
    > have
    > been pretty consciencous about that, but I'm finding
    that certain sites I
    > have
    > built are still slow in spite of my best efforts.
    >
    > Obviously there are some techniques I could use a little
    education on.
    >
    > Without getting too exotic, are there some simple,
    common practices
    > designers
    > use to help the load speed of web pages?
    >
    > I'm using simple html (no dynamics) and are just dealing
    with text and
    > images.
    >
    > If you need to see an example, this site's homepage
    sometimes can take a
    > bit
    > to load. I did say "sometimes" so obviously not all the
    loading issues
    > are
    > design related. PLEASE note this is a PG-13 site (no
    porn or anything too
    > bad;
    > just adult humor and comment).
    >
    >
    http://home.comcast.net/~buckanddusty/
    >
    > Thanks
    >
    > Tom
    >
    >
    >

  • Why is video so slow to load

    Why is video taking so long to load on my desktop Mac? I just switched from Windows

    What speeds are you getting?

  • Web pages are slow to load up.

    I am having trouble loading up web pages, they do eventually load but its very slow. I wan't to delete unwanted/ junk files how do i do this

    The first thing you should do is check your internet connection, try it out here:
    http://www.speedtest.net
    One important thing to note is to ignore the ads at ALL COSTS, that mac clean thing is NOT something you want
    If your results are 5mbs or less, I would say its your internet connection to check.
    Secondly, use an up to date browser such as chrome or safari. If you have any exemptions, turn them off.
    Those are some tips I have, I have no clue how to remove junk files to speed up your browsing experience.
    Hope this helped

  • Embedded video causes slow page load

    Hi,
    I recently noticed that any flash content webpage loads real slow in Firefox or Safari. It takes about 6 seconds for a webpage to load if there is a little YouTube window on it. In those 6 seconds the browser is unresponsive.
    Is there anything I can do to speed this up?
    Thanks

    I have cleared my cache in Safari and Firefox - nothing changed.
    I installed Flash 10.1 RC - no difference
    I installed the Flash blocking addons - when I then click on the video window it takes the same amount as before to load (not surprising). But why is so slow to begin with when it comes to YouTube embedded content?
    here is the website of our kids soccer club - it takes 8 seconds for the World Cup YouTube content to be available - playback is fine, but until it loads it takes 8 seconds - and for that time the browser is unresponsive (spinning wheel)
    I have 256MB VRAM on the card (Radeon 9800 Pro) and otherwise 4GB RAM!
    Thanks

  • Websites are slow to load and then they become unresponsive

    Websites take a very long time to load up and then if I try to close a site or go back a page, the whole thing becomes unresponsive and I have had to turn off my computer.

    since the new update to Firefix 4... my own website is very slow. The smiley actions appear in slow motion and when i update a page... it takes ages to save. I think this is a pitty because now i have to use a other progam to work on the site aswell i hae to recommend other programs now to the members (4600 users and growing) I like FF bery much... so i hope this will resolve soon.

  • HT4623 I have just updated my iphone 4 to OS 6.0, but since then I have been unable to access my emails, also facebook and ebay apps are slow to load

    I have just updated my iphone 4 to OS 6.0, but since then I can't access my emails as when trying to open a particular email I am presented with a blank screen. Other apps such as facebook and ebay take an absolute age to open.
    Is anyone else having problems? what can I do to put it right?

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • Is anyone having trouble with the Ios5 update? All videos are slow!

    When I try to watch YouTube, or any movies it takes forever. I didn't have this issue untill this update (beginning to hate I did it). Someone please help me I can't even see my soaps!!!!

    I was just keying some green screen and playing back when it crashes. I have 4 other edit suites and we all are having issues since updating.
    PP 2014.2 Release CC v8.1, Caravan 8.2.0 (65) Build  OSX 10.8.3, 36GB RAM, GTX 680 2048 MB GPU.

Maybe you are looking for

  • Help me to run pkg via procedure

    i have a package :   create or replace PACKAGE SUBS_INS_API_SS IS PROCEDURE SUBSCRIBER_INS_SS     (SOURCE_SYS_ID IN VARCHAR2,     TRACKING_ID   IN VARCHAR2,     ACCOUNT_NO IN VARCHAR2,     prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,  

  • How I restrict Scheduling agreement type for specific Purchase organization.

    Hello Experts, I have created Scheduling agreement type (ZLT). I want to restrict this agreement type for specific purchasing organization. I have search many threads but I didn't get solution. Is it possible through Configuration or user exit. Kindl

  • EMac G4 700 speakers working intermittently

    Today the speakers on my eMac 700 are working fine, but for most of this week, an hour or two after awaking from sleep overnight, they produced no sound. The iSub worked fine and I could get full sound through headphones. Naturally, I'm delighted to

  • Here is something that worked for me instantly...IOS 6 upgrade...

    ok guys just after trying everything for changing dates and all the steps that were mentioned I was soo hearbroked cuz nothing was woking for me...I was still unable to upate from itune store and even my facebook was not working after updating to IOS

  • Integrating SCCM 2012 SP1 Endpoint Protection Manager with SIEM

    Team, Does anyone know how to expose the central SCCM antimalware reporting data to external sources?  I would like to take all centrally collated security events and load the data into Arcsight express, e.g. client malware detection events.  Are all