Videos are stuck in convert queue ... downloading okay but not converting

I am downloading a video from you tube and it is stuck in the convert mode.

fafouli wrote:
I have found out how to remove message in a queue, but not how to extract them and redirect them so they are delivered. I hope they will not disappear as they are tried out every so often.How you get the messages to be 'redelivered is very-much a case-by-case basis. Once an email enters a queue it can be difficult to get the email redelivered in an automated fashion as there may be insufficient data to work out where the email needs to go.
For example if you have emails stuck in the ims-ms channel the envelope address is <uid>@ims-ms-daemon, getting this to be redelivered to say another store or another non-messaging server (the 'original' address the email come in as) may not be possible.
The channel (tcp_scan) was set up to analyze messages for spam/virus on another host according to the CONVERSION setup. Then this mailfilter host died. I stopped the redirection at the MTA, but some messages were already stucked in the channel queue.
CONVERSIONS
in-chan=tcp_scan;out-chan=*;CONVERT No
in-chan=tcp_submit;out-chan=*;CONVERT Yes,Channel=tcp_scan
in-chan=tcp_auth;out-chan=*;CONVERT Yes,Channel=tcp_scan
in-chan=tcp_local;out-chan=*;CONVERT Yes,Channel=tcp_scanI assume this is the before configuration otherwise the conversion hop is still in place as Jay mentioned.
FILE:ima.cnf
! tcp_scan
tcp_scan smtp mx daemon 192.33.219.42 \
port 2525 subdirs 20 noreverse dequeue_removeroute maxjobs 7 \
pool SMTP_POOL maytlsserver allowswitchchannel \
saslswitchchannel tcp_auth
tcp_scan-daemonAn alternative approach to what Jay suggested. If the conversion hop is indeed no-longer in place, you could try changing "mx daemon 192.33.219.42" to "nomx daemon 127.0.0.1" and uncomment the tcp_scan channel. This should then cause any emails in tcp_scan channel to be delivered back into messaging server (rather then the anti-virus/spam system) and then get delivered as-per-normal.
Regards,
Shane.

Similar Messages

  • YouTube videos are all silent, on Firefox and Safari, but not Chrome

    I'm baffled by this. It used to work fine and I'm not sure what changed but a month or so ago, suddenly all videos on YouTube are silent.
    --The videos are silent on Safari and Firefox, but I can hear them on Chrome
    --This only happens on my profile (the main profile)...my daughter's profile on this same MacBook doesn't have the problem
    --Videos from Vimeo.com play just fine.
    I've removed Flash and then updated my Flash player to the latest version, 11.6.602.180
    I've tried deleting my YouTube.com cookie in Safari.
    I can't figure out what would make videos silent in this specific set of circumstances but not others, so any help or suggestions you could provide would be appreciated.

    BTW I've looked similar threads on here, and have some additional info:
    --Video on cnn.com works fine.
    --I am not on the HTML5 trial according to this http://www.youtube.com/html5
    --I have not tried Vertical Forest yet as I'm unsure if it will help http://www.verticalforest.com/youtube5-extension/
    --I haven't tried resetting Safari yet. I have this problem in Firefox too.

  • Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro but stuck with QTX. Downloaded QT7 but it won't let me install it. Any suggestions? B

    Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro as standard but stuck with QTX. Downloaded QT7 but it won't let me install it. Says I can't do install as I already have QTX. Does FCP not come with QTpro or am I jsut being stupid. Any suggestions would be great. Thanks.  B

    Hi there,
    Are you running Lion or Snow Leopard? either way this may help by the looks of it.
    http://www.macworld.com/article/161320/2011/07/lion_quicktime7.html
    cheers
    Andy

  • My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    Hello wilsontot_too,
    Thank you for the details of the issue you are experiencing on your iPhone.  It sounds like you are not noticing transparency on your iPhone.  It may be that you have "Increase Contrast" turned on in your iPhone settings.
    I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
    iPhone User Guide - Large, bold, and high-contrast text
    http://help.apple.com/iphone/7/#/iph73b89c6
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I would like to detect all the keyboard key is okay, but not every key can be detected by using LabVIEW example, keyboard keycode

    I would like to detect all the keyboard key is okay, but not every key can be detected by LabVIEW example ( we can use 『basic input demo.vi』to detect normal key』.
    I want to detect some 『hot key』 for example some keys exist in the upper part like 『search key』、『e-mail key』、『volumn control key』...etc. They are very often to be watched in some new keyboards, but we still don't know how to detect if their functions are okay.
    Can we detect signals of these 『hot key』 in LabVIEW? We can apply these hot key's functions in XP, so we should detect their signal, I think, but I can't do it.
    I serach some information about this question, and somebody said we can detect hot key's signal by grabing 『keybode』 these hot key feedback. But I don't know how to do these. I can't use VC. So anyone can give me a LabVIEW VI to grab keycode? Or any other solution we can detect all the key on the keyboard, including hot keys?
    Thanks!
    Regards,

    Maybe that is the limitation of Acquire Input Data.vi.The vi can't identify the Unformal key.
    You can try to use Event structure and set to listen "key down" event.
    There are two terminals VKey, ScanCode will sent out the information when you press key.
    There are two pictures in attached file, 2.jpg will show you the detail.
    Good luck.
    Attachments:
    SpecialKey.zip ‏17 KB

  • IPhoto will not initiate. Downloaded update, but not change.  Any help out there?

    iPhoto will not initiate. Downloaded update, but not change.  Any help out there?

    If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4436 I have a laptop Mac and an IPad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the IPad, how can I set up the iCloud in both devises to do so?

    I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?

    Welcome to the Apple Community.
    Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
    However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box.

  • I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

    I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

    You need to contact Adobe Customer Support :
    They will check and assist you. (Live Chat)
    Contact Customer Care

  • I payed for my creative cloud membership 9.99 / monthe. bought it this morning. I was able to download Lr, but not Ps. I am wondering why is asking me to pay antoher 9.99 if I got the student deal. Can you please help. thank you.

    I payed for my creative cloud membership at 9.99/mo. I got it this morning. I was able to download Lr, but not able to download Ps. is asking me to pay again. Why is that, because I got the student packet deal. Can you please help.

    Mariacazarez what is the exact error message you receive when you try to download and install Photoshop?  For information on how to install the Adobe Creative applications included with your membership please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • HT204053 we have moved over to iCloud but now we need a another email for a blog we are doing can we add another email but not alias

    we have moved over to iCloud but now we need a another email for a blog we are doing can we add another email but not alias

    Welcome to the Apple community.
    You can add an alias but not a second email address to your iCloud account. You can however add a second iCloud account to your iOS device (which will come with its own email address) at settings> mail, contacts calendars.

  • I have a new keyboard and two of the keys are inverted when I use my Mac -- but not on the Mac at the Apple store. The @ is where the should be and visa-versa. That is, when I type the @ I get and when I type the I get @. I am in Français numérique.

    I have a new keyboard and two of the keys are inverted when I use my Mac -- but not when they put that keyboard on the Mac at the Apple Store. The @ is where the < should be and visa-versa. That is, when I type the @ I get < and when I type the < I get @. I am in Français numérique. Thanks

    Try a SMC reset, please do it 2-3 times.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • After downloading iOS5 my music and videos are showing as synced on my computer but aren't showing on my iPad?

    I downloaded iOS5 and went through the syncing process. Within iTunes on my computer my iPad is showing as having the music and videos 'on board' (the colour bar is even showing the content is on my iPad.
    But when I look in Music, it shows as 'No Music'.
    Any help appreciated.
    Cheers, S

    yes, same here.. my apps are still there, but music and videos are gone...
    please, can anybody help?? i can't put the music back onto my iPod, because my usb ports aren't working... what can i do???

  • App store and itunes store are stuck in Japanese store. Says: Account not in Store. Your account is not valid for use in the Japanese store. You must switch to the Philippines store before purchasing.

    My app store and itunes store are stuck in Japanese store. I already moved to the Philippines for about a year ago and my stores still won't change its location.
    I already changed the region/country in my apple id. I tried to sign out and sign in back to my account. Tried it in app store, in itunes store, in settings app, in itunes in my laptop, in the apple website. It shows that my apple id is already set to Philippines, no matter where I sign in my account.
    The problem is when I open my app store (or itunes store) in my iphone, it appears that it is in the Philippines store; however, when I sign in my account (and I tried to sign in everywhere), I cannot download any app from the Philippine store. When I try to download an app, it always says "Account not in this store. Your account is not valid for use in the Japanese store. You must switch to the Philippines store before purchasing." I have read everywhere and most of the answers say that it should automatically direct me to the correct store. It doesn't happen to me, apparently.
    I have the same problem in both my iPhones. Both are iPhone 3GS and in version 5.1.1. I don't want to upgrade to iOS6 so please don't tell me to do so. Thanks!

    try logging out of of store and then log in again
    and check this out
    http://support.apple.com/kb/HT1311

  • ICloud Photo Library: How do I transfer photos and videos only from my iPhone to my iPad but not from my iPad to my iPhone?

    I had iCloud photo libraey turned on on both my iPad and iPhone. As said by the feature, photos and videos were being transferred automatically from each device to each other. I have a 64GB iPad Air 2 and my iPhone 5 only has 16GB of storage so I am lacking much more space on my iPhone than my iPad. I was wondering if there was a way to transfer photos only from my iPhone to my iPad but not from my iPad to my iPhone. Would turning off iCloud Photo library on my iPad do the trick? Thanks hope someone can help me out.

    iCloud Photo Library keeps all of your photos in the Cloud which you then can selectively download. So, unless you download the iPad photos, they are not going to be taking up any room on your iPhone:
    How does iCloud Photo Library save space on my device?
    If you turn on Optimize [device] Storage, iCloud Photo Library will automatically manage the size of your library on your iOS device, so you can make the most of your device's storage and access more photos than ever. iCloud Photo Library stores the original, high-resolution photos and videos in iCloud and can keep lightweight, device-optimized versions on each of your devices. As long as you have enough storage, recent photos and videos that you access the most will stay on your device at full resolution.
    You can turn on Optimize [device] Storage from Settings > iCloud > Photos or Settings > Photos & Camera > iCloud Photo Library on your iPhone, iPad, or iPod touch. You need an Internet connection to access an original photo or video that’s stored only in iCloud.
    Here is a link to the FAQs page for iCloud Photo Library:
    iCloud Photo Library beta FAQ - Apple Support
    Cheers,
    GB

  • Sony cybershot videos automatically import into iPhoto on MacBook Pro but not iPhoto on Mac Mini

    This is so weird.  I have iPhoto '11 vers 9.4.2 OS 10.7.5 running on both my MacBook Pro and my Mac Mini.  I can hook up the Sony cybershot and import all photos and videos into the MacBook Pro's iPhoto without any problems or special actions.  But the MacMini will only import the photos and never recognizes the videos even being there. 
    As a work around I can then drag the videos from the MacBook Pro's iPhoto window to the desktop, then turn on file sharing and pull them into iPhoto on the Mac Mini w/out any problems. 
    Info on the videos on the MacBook Pro's iPhoto: 1920x1080 H.264 29.97 fps
    Once those videos are dragged to the desktop it's a .mov and opens in Quicktime
    Info on the videos on the MacBook Pro's Desktop before file sharing to the Mac Mini:  Format: AVCHD 1080i60, 1440 x 1080 (1920 x 1080), Millions  16 bit Integer (Little Endian), Stereo (LR) 48kHz  29.97 fps  Data Rate: 83.1 Mbit/s
    What's going on here?  Is there some special codecs or something on the MacBook Pro iPhoto that the Mac Mini's Iphoto doens't have?  How can I fix this so my wife can import the videos straight to iPhoto on the Mac Mini like I'm able to do on my MacBook Pro?
    Thanks!
    J

    Yes and no. It is my understanding that the most direct way will require attaching the script to each of the subfolders. However, the attaching of the script can be done using AppleScript. Those subfolders that are already in existence can have the scripts attached using the following script:
    click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">property WatchedFolderName : "Camera Phone Images"
    property WatchedFolderPath : ((path to desktop) as text) & WatchedFolderName
    property ScriptName : "Subfolder detection.scpt"
    property ScriptPath : ((path to Folder Action scripts) as text) & ScriptName
    tell application "Finder"
    set target of window 1 to folder WatchedFolderPath
    set theSubFolders to folders of entire contents of target of window 1
    repeat with i from 1 to count of theSubFolders
    tell application "System Events"
    attach action to (item i of theSubFolders as string) using ScriptPath
    end tell
    end repeat
    end tell</pre>
    and subsequently added folders can be caught by adding a test for folders being added in the folder action script. I am working out the details on that one now.
    PowerBook 12"   Mac OS X (10.4.8)  

Maybe you are looking for

  • 3D photo merge/montage app?

    Hi, I was recently on holiday and while in a beautiful old building saw a man taking photos on his iPad 2, the app he was using then merged them/created a montage which replicated the inside of this building in 3D, it looked incredible and gave a rea

  • Help! Error when trying to re-download and re-install CC Muse

    Hello - I have used Muse for some time via the monthly CC subscription.  I ran CCleaner and Muse got wiped.  I try and retry to install but each time the "Installation failed."  The blue "More Information" link doesn't work.  I installed InDesign rig

  • Is there a Canon Eos (T4i, T5i) camera digital file transmitter avaialible? Please help!

    Is there a Canon Eos (T4i, T5i) camera digital file transmitter avaialible?  These models tlisted for Canon all cost $600 + and up all say they are only compatible with with the pro models.  Is there a another brand or model that works with the lower

  • Fragmented logic

    Hi, Os : Red hat /Aix Db : 10.2 Db_block_size=16k,All tablespaces are created as a Locally managed tablespace. Recently We moved fragmented tables from one tablespace to another based on total number of extents. We have 4 four tablespaces which has d

  • Preload bar....

    I've got a preload bar that has a bar that goes across the screen giving the percentage loaded. The bar works, but for the first second it flashes up on the screen then disappears before it starts to move across the screen. I can't work out why it's