Videos... Audio/Video - its all out of sync..

I have been using pspware to convert movies and music vids to my ipod - no problems. Now i have converted a music vid this morning and the music and video seems to be all out of sync. The lips are moving - but the sounds is ahead of it.
Any ideas why this is???
Help....

Find two sync points - one near the beginning and one near the end - maybe a syllable of speech, where you can see the mouth movements?
Put separate markers on your video and audio at all four points. Adjust the speed of the audio until the markers align.
You can calculate the new speed you need if you measure the lengths on the timeline accurately, and get the markers to match within a frame - plenty good enough over the whole timeline.

Similar Messages

Conform process all out of sync.

I can't tell if I'm doing something wrong, or if it's just STP being buggy, but when I try to conform a project to a new version, the audio files get all out of sync!
I have a 4-minute video that I already mixed in STP. I made one change to the video in FCP, lengthening a single clip somewhere in the middle. I re-exported to STP, and conformed the old project to the new stmp file. When I do this, all of the clips after the new edit are out-of-sync. Some of them moved, some of them slipped. Even if I click on the 'un-modify' buttons in the conform window, none of the options get the clips back into sync. I'm using the "fully rendered video" option out of FCP to make sure the video is right.
It's really slowing me down to have to re-mix and master the audio every time I make a small change to the video. Am I doing something wrong here?

Hi T-Bob,
You and me both. A near-3 hour programme here, with a slight nip in the middle, conforming the oh-so-long dub should have been easy... instead, hundreds of sync-slipped audio clips, clicks appearing from nowhere... easy it isn't.
In the end, I'm having to re-dub the whole 3 hours again.
No one can help?

Audio and Video become increasingly out of sync when watching a movie.

When I watch a movie from my itunes folder (purchased) the audio and video become increasingly out of sync. It is like watching an old Godzilla movie. I am using itunes on a Dell XPS M1530 running windows 7. Does anyone have a solution to this? I am not sure if I have a hardware problem or a software problem.
Thanks,
J

Hello Robert Sharrock,
The following article can help sort out most playback issues in iTunes for Windows.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Cheers,
Allen

Voice recorded on Gb and video on DSLR out of sync.

I recorded a cooking demo on video and captured the voice on GB and the image on a Nikon HD Dslr 300s at 25 fps. ( video setting to PAL ) When I brought them into FCPX to edit the audio and visual are out of sync ie. after about 30 sec the audio is about a sec later than the image.

This happen sometimes because either the camera and mac are running at different clock cycles or problem when importing or exporting of the media . The only thing you can do about it now is adjust the speed of the audio or video. You can do a bunch of math to figure it out of trial and error with speed adjustment. Also short clips will be less of a problem so you may want to split clips up some.

Audio goes in and out of sync when burned dvd played on standard DVD player

I made a short film recently (7:00 mins) and once completed and burned to DVD using iDVD and DVD Studio Pro about 20% of the clips have out of sync audio. Just slightly out of sync. Some more noticeable than others.
Playing off the timeline syncs perfect, the exported prores 422 mov file syncs perfectly, and if the finished DVD is played on my mac or my pc the sync is perfect, but when played on a standard dvd player to my TV I get the syncing problem, but only at certain points through the film. As I said, about 20% of it. The rest of the film is fine.
Shot on Canon 5d mkII - footage converted to prores 422 1920x1080. Audio recorded on Zoom H4N with some ADR recorded on logic pro. Audio synced manually using clapper board reference. Using a 27'iMac with current OSX update as of 14 March 2011. Edited in FCP 7, exported to proress 422, burned to DVD with current iDVD and DVD Studio Pro, all current versions and updates.
I have tried exporting to mpg4 and mpg2 - no joy. I checked audio bit rates and discovered the logic recorded stuff was 44.1khz as opposed to 48, so I converted to 48 but still no fix.
I am STUMPPED
Any suggestions?
Cheers
Dallas

Should I convert just the clips which are out of sync in the DVD, or all of theclips in the FCP timeline?
If that is the issue, wouldn't I have the problem in the final prores mov as opposed to just when its played dvd to tv?
Ill try it though. Its an odd problem so its likely to have an odd solution. Willing to try anything at this point.
Thank you.

TS1362 All of the movies I have rented or purchased from iTunes in the last 4 months fail to play properly. The audio and video are constantly out of sync. I have followed the iTunes suggestions to correct this, however nothing has worked. (Windows 8)

I am using a Dell inspiron 14z, with Windows 8, and before that a Dell with Windows XP. This is also happening on my iPad. For the last four months, none of the movies or television shows I have rented or purchased from iTunes have played properly. The audio and video are out of sync. I have tried the troubleshooting measures iTunes suggested, however nothing seems to work. I have read on the community that this has been a problem for users in the past, and have attempted to try some of the fixes individual users have suggested also. Again, nothing seems to work. At this point I am frustrated, as we purchase or rent almost exclusively from iTunes. I would appreciate a support-staff person response. Thank you so much.

this problem has been going on for windows users for over a year now.
Apple has no solution to this problem.

N8 Video editor.. out of sync audio

Every time i try and join 2 or more videos taken with my N8 using the video editor, the audio gets out of sync after the first video.
Has anyone else notice this?

I'm really shocked that this issue hasn't been resolved with the Belle Update. They've made some good changes to the video editor, now allowing you to save a project before you're finished, etc. However, I can't understand how they haven't spotted and resolved this problem by now. Anyone from Nokia care to respond? This really does ruin an otherwise very promising piece of software!

Why is the video and the audio in iTunes drifting out of sync?

This has been happening for awhile, and it is annoying me quite a bit. I can run the video find directly through QuickTime. I have been serching for an asnwer for awhile now. I have the most recent version of iTunes 10.5. Help would be appreciated. System specs below.
CPU: Intel i7 2600
Graphics Card: ATI 6990
Motherboard: Intel DZ68DB
RAM: 8GB DDR3 Ripjaw
OS: Windows 7 Professional 64x
The video usually begins normal, but within seconds the audio and the video drifts out of sync. Pausing and playing the video helped for a few seconds, but it quickly drifs out again. Help would be much appreciated. Thanks!

Im having this problem too, upgraded my laptop to windows 8 and the audio and video sync makes movies and tv shows unwatchable. I have tried re-installing itunes but this made no difference

MP4 video files have out of sync audio?

When I import an MP4 video into Premiere Pro CS5.5, I noticed that while playing it the audio gradually becomes out of sync. I am unsure as to what causes this, but when I play the exact same video in an external player (like VLC) the audio is fine.
I've tried using Audition to export the audio from the video as a WAV file, but upon importing that into PP CS5.5, I discovered that it becomes much worse.
I'm not sure at this point if the audio is the issue or the video is the issue, but I'd really like an answer.
Audio settings are at 48 kHz for the audio itself and the sequence in Premiere Pro.
Thanks.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Also, See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

Two synced video clips come out of sync in the middle

I am working on a two camera project and I have synced the cameras using a sync point. At first the videos remain in sync and play fine, but shortly into playback the tracks come out of sync. I have not moved any of the tracks. How do I keep this from happening?
I am using Final Cut Express HD 4 and am working from an external hard drive. It is a Lacie 500GB -8Mb Cache - 7200RPM Mini Hub. The max interface transfer rate is 400Mbits/s for firewire and 480Mbits/s for USB 2.0

Does the video from the two cameras go out of sync with each other or the audio? What are the item properties for the two clips?

Video is going out of sync

So I don't recall any upgrade before this issue began. Upon opening an old fcp project file a few of the tapes appear to have gone slightly out of sync. This is not a gradual sync issue that frequently results from audio rate mismatching. It's like the whole tape is five to ten seconds off from the source audio captured at the same time. The strange thing is that when I render out the video it appears in sync. Also when I use the slip tool the reference frames in the viewer window shows the correct frames as far as I can tell.
What's even more strange is that footage I just captured for a new project seems to be doing the same thing and it only happens on some tapes. Other tapes work fine. Another way around this issue that I've found is to nest the sequence. When nested the correct video plays. It's really weird.
It's been a nightmare to edit. I constantly have to flip back and forth between sequences and the exact edit is always a guess and check process requiring rendering frequently just to see if the cut is correct.
I am and have always been editing 24p advanced footage. None of my settings have changed. This issue popped up out of nowhere.

If you are running FCP 4.5 and OSX 10.4.9, >>THIS THREAD<<</a> may be of interest.
x

Video - dialog goes out of sync with video

When I play Movies or T.V. shows on my iTouch the dialog (or audio) gets out of sync with the video. It starts happening after about 5 minutes of play. I close out of the video, re-open it and it's back in sync again for about another 5 minutes.
I had a second generation iTouch and have just purchased a 3rd gen iTouch and it does it on both. It happens on every movie or t.v. show I watch.
Any suggestions?

I really appreciate your help. I tried it with the link you provided and it appears it's the wrong format type. The one I'm trying to convert is a .wmv file. I think that link was mainly for mpegs.
I did successfully convert a 3rd movie .wmv file using videora, so I have to think the problem lies with this one movie clip. What could it be? It plays fine on my computer! The video itself is fine after the conversion too, it's just moving too fast as if in fast forward mode. Then when the video ends (before the music, cuz it's not in sync), the video keeps backing up and continuing from later and later previous spots until the song ends.
If you're out of ideas, I guess I'll try to see if I can find the video somewhere else and download it again (I got this video free from a website). It's super cool.. An F-18 pilot video tapes himself performing aerial maneuvers to the song "magic carpet ride". Darn, I REALLY want that on my ipod!!

My itunes video's are out of sync

hey guys
my music videos are out of sync------when i play them the sound always comes before the video if you know what i meen
any ways to fix this
cheers
jack

Are they legally or illegally downloaded videos? If they are illegal, check that the original file isnt out of sync. If it isn't, and you used a program to format the video to play on ipod, play the formatted version on your computer and see if that is out of sync or not. I suspect that this will be the case as a lot of programs out there don't do very good jobs of formatting videos.
If you did it legally though, I'm not sure how you'd solve the problem.

Audio randomly playus back out of sync

One of the FCPs at a place I work at has a strange audio sync problem.
It's an 8-core MacPro running the latest versions of FCP and Snow Leopard. It has a Kona LHe card with the latest firmware. Editing is done using IMX50 codec, SD PAL. Monitoring is done on an external monitor and speakers via the AJA card.
All is ok until you turn on audio scrubbing, after which the audio rendomly goes out of sync, stopping and starting will sometimes play back in sync. Monitoring via the Mac's internal speakers is always in sync, and the video is always playing back ok (the Mac screen and the external screen are always in sync (cuts occur at the same time on both screens).
Laying to tape and exported Quicktimes are always in sync.
I'm guessing it's some kind of AJA issue, has anyone any thoughts?
Cheers
Steve

Welcome to Apple Discussions, m
See if any of the suggestions offered here reduce your sync quality problem enough:
http://discussions.apple.com/thread.jspa?messageID=7089133&#7089133
If, after making certain that your Mac is running well, has plenty of free space on the correct drive, etc., your sync is still not close enough, you can manually re-sync any parts that are unacceptable to you using either QT Pro or iMovie.
If you check carefully, you will see that not even pro video is always perfectly synced. It is a lot of work to get things "nearly perfect," but, with a bit of practice, it doesn't take long to get things "close enough" for me.
I use the same simple process with either QT Pro or iMovie, so you can use whichever you find easiest. Whichever you use, keep the original AV clip safe and *_work on a copy_* in case something goes wrong.
If you do not already know how, here is my process, but you can adjust for your workflow:
(1) Copy of the audio track.
(2) Add the audio track copy to the AV file.
(3) Silence the original audio and work on audio copy.
(4) Insert small blank audio clips (or split and slide if using iMovie) if needed to make the audio later.
(5) Cut small bits out of quiet parts (or split and shorten in iMovie) if needed to make audio sooner.
(6) Repeat until satisfied and delete any tracks no longer needed.
(7) Save the adjusted AV file.
(8) Enjoy!
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

In Premiere Pro 2014 imported audio skips and is out of sync - version 7.2.2 was ok

I have been importing AVCHD Content in to Premiere Pro 7.2.2 with no issues. Now that I have upgraded to Premiere Pro 2014, importing that same AVCHD footage causes the audio to skip and finish before the video causing it to be out of sync. I compared preferences between the 2 versions and all settings seem to be the same. This is something clearly different between these two versions of Premiere Pro. Anyone else have this issue?

Here is some additional info:
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
Revision ID: 0x0000
ROM Revision: 113-C0170F-175
EFI Driver Version: 01.00.560
Displays:
iMac:
Display Type: LCD
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort

Videos... Audio/Video - its all out of sync..

Similar Messages

Maybe you are looking for