Videos dont play on my computer I have a mac osx 10.3.9 and it says unsupportive operating system i must get tiger or leopard
i have mac osx 10.3.9 and i must get tiger 10.4 or later to play videos and other things like links in my e-mail won't open, and other problems
== This happened ==
Every time Firefox opened
and ....?
Similar Messages
-
I have a mac osx 10.8.3 and the magnetic cable no longer attaches to the computer. Is it possible for the computer or cable to just lose its magnetic attraction and any suggestions on what to do(or do I need to buy a new cable).
ThanksBuy a new AC adaptor after you verify that the problem isn't the mag-safe connector on your computer. Take it in for service.
-
I have a Mac OSX 10.4.11 and want to purhase software (Quickbooks). Is there any place that I can buy software for this computer?
http://store.apple.com/us/browse/home/shop_mac/software/finance
However, the system requiments are pretty steep:
Mac OS X v10.6 or v10.7
2GB of RAM
Intel Core 2 Duo or later
so you at minimum need to upgrade the OS to at least OS 10.6. That is this package:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
I'm in Idaho 100 miles from an Apple Store and use the online Apple store all the time. Iy's your best resource in the rural West. -
I have a Mac OSx 10.6.8 and iPhoto 7.1.5 and can no longer order printed photo albums unless I update to new version of iPhoto. But reviews of new iPhoto are so negative that I am uncomfortable about buying it. Will it be fine or should I steer clear of trouble and accept that i can no longer publish my photos?
iPhoto '11 is working well.
The reviews usually only show the comments of people who do not like the changed features.
To get an idea what to expect, when you upgrade, look at the iPhoto '11 support sites.
The video tutorials: http://help.apple.com/iphoto/index.html#button-0
Browse the help, to see how it works: http://help.apple.com/iphoto/index.html#button-1 -
I have a MAC OSX 10.4.11 and need to upgrade
I have a MAC OSX 10.4.11 and need to upgrade. I'm not too computer savvy but can handle basic things. How should I proceed?
Choose About this Mac from the Apple menu and check the processor.
If it's a G3, no further upgrades are available.
If it's a G4 or G5, buy a retail Mac OS X 10.5 DVD from a source such as Amazon or eBay.
If it's an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(77369) -
I have a Mac OSX 10.6.8 and I can no longer "save to iPhoto " when I get photos on email.
What changed, before you could no longer save image attachments to iPhoto?
Did you install new software or upgrade to newer versions? Which version of iPhoto are you using?
The "Save to iPhoto" feature has been missing for some iPhoto versions. I do not remember exactly when it vanished, but it is back with iPhoto 9,6 and MacOS X 10.10.2.
As a work-around - you can drag photo attacuments from your mail to the iPhoto icon in the Dock to save them to iPhoto. -
i have a mac osX 10.5.8 and i could always make photo books with iphoto , now all of a sudden i cant because i have iphoto version 7.1.5 i have tried countless updates and nothing is working ? help ?
Books are no longer supported with iPhoto '08 (a roughly six yeal old product) - you can purchase an iLife '09 DVD from someplace like Amazon or eBay and install it - iPhoto '09 is still supported this year
LN -
I would like to know what recommendations people have for poster software? I have a mac osx 10.6.8 and would like to know if there are any versions of photoshop that would be suitable.
Any help appreciated. Thanks.I wouldn't use Photoshop to make posters, though of course I'd use it with the photos that are part of the poster. For text work I'd use Illustrator or InDesign as appropriate.
-
I have a Mac OSX Version 10.5.8 When I put in my disc to upgrade to snow leopard version 10.6.3 it tells me I need atleast 1gb of ram memory to download. what can I do
Your iMac can take a total of 2 GBs of RAM Max.
Maximum Memory
2.0 GB
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
You will be able to install OS X 10.6 Snow Leopard and it will run, but you may not be happy with the performance overall.
OS X 10.6 Snow Leopard and later OS X versions use more and more CPU, GPU and RAM resources.
OS X 10.6, by itself, will use between 2-4 GBs of RAM to run quickly, smoothly and efficiently.
Start running additonal applications and your iMac is going to struggle.
Just fair warning if you notice that your iMac is running slower after installing OS X 10.6.
Good Luck! -
Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's
And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.
-
I have an MAC OSX 10.6.7 and when I turn it on the fan keeps running. I shut down/turn on and it's the same. Any suggestions? Thanks.
jean156,
I am a little confused, you are posting in an iMac forum however your profile only indicates you have a MacPro. While I agree a SMC reset may help please carefully read the link The hatter provided because different Mac's have a different processes for resetting the SMC.
In the mean time you may want to update your profile (Your Stuff in upper right and click Profile) and also please post in the correct forum to avoid confusion. -
I have a Mac OSX version 10.4.11 and iphoto 6. I can no longer order cards, prints etc. and cannot upgrade to a newer version of iphoto because I don't meet the system requirements of 10.5.6 or later. What can I do?
Unless you upgrade the OS and then iPhoto, not a lot, I'm afraid.
Regards
TD -
osx 10.7.1 and parallels 6 to run windows xp. my windows internet explorer is useless due to virus. so i have to use my mac safari for download of firefox. however, so far it will only download the .dmg file not the .exe file i need.
how can i overcome this? I need windows to run my auto cad program.Download from this page where you select the by Operating System. <br />
http://www.mozilla.com/en-US/firefox/all.html -
HT201364 i Have a mac osx 10.7.5 and doesn,t seem to instal maverick
i have a mac 10.7.5 cannot seem to instal maverick- is it cuz of 32 bit
10.7.5 was the last update to Lion.
You can try resetting the App Store.
Reset Learned from Old Toad
Look in your Purchases tab in the App Store. Does it show as purchased?
Browsers shouldn't have anything to do with it.
There is troubleshooting section and a contact link.
Support -
When I press print I get a blank page, only from web pages using Firefox. I checked print-preview and the page is blank. So I know something is not being recognized. Thank you.
Try This!
1) Go to Print Preview
2) Print
3) Name: HP PSC 2100 series (depend on your printer)
4) Properties...
5) Paper size: letter
6) Change to Paper size: A6
7) OK
8) Repeat step 4 again
9) Change back again Paper size: letter
10) OK
11) Don't print, but go back to Print Preview again and see if it works
This is the one that have work for me after trying several times modifying about:config with no success. Good luck and hope that will help.
Maybe you are looking for
-
Can't resize/repartition in Disk Utility: "No space left on device"
So I'm trying to get my Macbook (early 2008, base model) set up for triple-booting Leopard, Linux, and Windows XP. I've been using Boot Camp for about a month or so, and yesterday I used Boot Camp Assistant to remove the XP partition and make the Leo
-
How do I display on-the-fly generated XML on a web page using DW CS4 Spry regions?
On a main web page I'm trying to display formatted data from an ASP page that generates XML on-the-fly from a query. When I run the ASP page from the browser, the XML formatting of the data works. But when I run the main web page, the data doesn't di
-
Project does not open with TopLink 10.1.3 DP3 R2
I have a project that opens fine with 10.0.3 DP Build 031022 but won't open with 10g DP3 Build 041116. Here's the error. I 'd appreciate any suggestions or workarounds short of re-creating the project from scratch. racle.toplink.workbench.framework.O
-
Create Popup like Select options
Hi at all, I want to create a button that calls a popup like in the select options, without using the select options component. In Standard ABAP there is a function called "COMPLEX_SELECTIONS_DIALOG" who creates and call the dialog. Does anybody know
-
Process that's draining my battery
The past two days, my phone has been getting really hot and draining the battery for no apparent reason. Seems to me like there's a process that's getting hung up, so when I notice it happening, I turn the phone off, then back on again. But eventuall