Videos for Visio

Hey guys..i was thinking of putting some videos on my vision M. Is there any specific site that you find to be the best place to get them or do you just search around? Just wondering. Thanks.

There should be a way to fix it.
Check the AV connector to the Vision M end has 3 parts on the jack.
is for video
for left audio
is for right audio.
Now.... In most of these conectors, the video is on one of those parts, but for the Zen, it's on a different part. You could buy the official cable, or what you could do is just look at the End which connects to the TV.
You have the 3 seperate phono jacks going into a Scart convertor?
If so, you'll most likely have put the Yellow one in the yellow connector in the scart convertor. Well, that one is the video.
Try swapping the positions over. e.g. put the yellow phono jack into the red connector.
Check it out and see.
If that's not it, check to see that the Video you have is not 60Hz NTSC format running on a PAL 50Hz tv, or something. I think you can change the settings on the player.

Similar Messages

  • Where are the auto recovery files stored for Visio 2010?

    I have auto recovery set for every 5 minutes.  I have been working on a file that has been saved several times a day.  Today when just moving a shape Viso 2010 crashed after I had been working on the file for over 2 hours.  Auto recovery popped
    up every 5 minutes indicating it was saving the file.  After the crash the ony file I could find was the file as it was when I first opened it this AM.  None of the work done today was saved. 
    Did auto recovery completely fail?  Where can I look for the auto recovery file? 
    I have not done a reboot because I am afraid that if the file exits it will be gone for sure if I reboot.  Any suggestions are welcome.
    There must be a temp file or something that I can look for but not sure what the extension would be or the location.
    Hopefully someone here can help.
    thanks,
    greg
    Greg J Wilson

    How do I know? You state the the auto-save file extension is .vxd - that's the Visio document XML format.
    You can change this in File -> Options -> Save
    As for the crashes, are there any messages when a crash occurs?
    Check that the video drivers you have are the latest, try a different screen resolution to see if that changes anything and turn off or change any screen accelerators.
    -- Paul Herber, Sandrila Ltd. http://www.sandrila.co.uk/ Engineering and software shapes for Visio.
    My mistake - the file format is .vsd - standard visio format
    Here is the info from the event viewer for the specific crash that caused me temporary pain.
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider
    Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated
    SystemTime="2011-07-25T17:15:25.000000000Z" />
    <EventRecordID>83552</EventRecordID>
    <Channel>Application</Channel>
    <Computer>gw-Tosh_laptop</Computer>
    <Security
    />
    </System>
    <EventData>
    <Data>VISIO.EXE</Data>
    <Data>14.0.6022.1000</Data>
    <Data>4d6eacd6</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>8469f91f</Data>
    <Data>1668</Data>
    <Data>01cc4ae02611b81c</Data>
    <Data>C:\Program
    Files\Microsoft Office\Office14\VISIO.EXE</Data>
    <Data>unknown</Data>
    <Data>af70a4ff-b6e1-11e0-82fc-001e33913568</Data>
    </EventData>
    </Event>
    Greg J Wilson

  • Setting up Jabber Video for TelePresence with QS C20 system

    I am trying to connect  Jabber Video for TelePresence for Mac (Free version)  from home to my office's QuickSet C20 system. Can you tell me what data (addresses etc) I need to have and where to input them to make this work.
    I have downloaded the software on both the mac and ipad and have created an account.
    Can someone help?
    Doug

    Thanks again.
    The info from C20 system is:
    URI 1 :
    [email protected]
    DisplayName :
    Click to edit...
    DefaultTransport :
    Auto
    TlsVerify :
    Off
    Type :
    Standard
    Outbound :
    Off
    Proxy 1
    Discovery :
    Manual
    Address :
    Click to edit...
    Proxy 2
    hope this helps.
    Also what is the difference (in the context of the above connection issues) between iPad o Mac version of Jabber Video.
    doug

  • I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class now and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, heard Apple will drop support. Help?

    I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class in FCPX and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX. Any truth? Advice?. I'm on 10.7.4 with 2.4 GHz Intel Core 2 Duo, 4 GB 1067 MHz. Thanks.    

    dkstj wrote:
    Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX.  
    While it is against the TOU of these boards to speculate on future products/updates what Thomas said is right: FCPX is quite a new product and it doesn't make any sense to drop it now.
    The only thing that MIGHT get dropped at a certain point is support for older hardware/OS as FCP X progresses.

  • Making an explanatory video for users of Azure

    I went to MSDN to post a question to a forum on Azure, but when I click 'ask a question' it takes me here to "machine learning" instead of to "features", "pricing" etc..  
    Anyway, the question is this.  I had a trial version of Azure, and I put up maybe 800 meg of videos and I also used Azure media services to get URLS to them that I could view in a webpage.
    I looked at my costs (my bill), and it looked like I was only getting charged about a dollar a month.
    I couldn't believe this, and since I also did not know how to terminate my account, or even delete the storage that I was using up, I just stopped paying.  
    Now, I want my website users to get their own storage from Microsoft, and I want to give them an explanatory video that shows them how to use Azure media services so that they can store their own videos, and also post the URL to my website, where they can
    watch those videos with some features added by my website.
    But I need to be sure I understand the billing, before I create this tutorial video for them.  
    If they put up perhaps 40 videos of 100 meg each (4000 meg is about 4 Gigabytes) and use the media services etc.  Are they really only going to be charged a few dollars a month?
    Thanks,

    Hi Gidmaestro,
    A Media Service account is tightly coupled with one (or more) storage accounts. If you already have a storage account, you may choose to assign it to your new Media Service account. Please refer to
    http://azure.microsoft.com/en-us/pricing/details/storage/ for the azure storage billing details.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can two users work on iMovie?  My husband is working on a memorial video for a family member who passed, I plan to edit but he had to take his computer to work.  I have the iMovie project on a zip drive.  How do I get it to open in my imovie?

    How can two users work on iMovie?  My husband is working on a memorial video for a family member who passed, I plan to edit but he had to take his computer to work.  I have the iMovie project on a zip drive.  How do I get it to open in my imovie? 

    You will need an external drive that is formatted as MAC OS EXTENDED (journaled).
    Move the Project, Events, and any photos and music to the external drive by following the instructions in this post.
    https://discussions.apple.com/docs/DOC-4141
    Be sure to use CONSOLIDATE MEDIA to get the photos and music. Then plug this drive into your computer and you will be able to edit.

  • Is there a way to "center" video for DVD distribution?

    This may be a long story so hear me out...
    For the past year or so, after every great sports win by my alma mater Michigan State University I make a highlight video for web distribution. My workflow for doing so goes like this:
    1. Record straight to DVD from Tivo or live TV using Panasonic ES10 recorder
    2. Extract clips using Cinematize (uncompressed full quality setting, automatic adjustment 640x480)
    3. Import clips into Final Cut Pro and edit
    4. Export full quality uncompressed Quicktime
    5. Export H.264 for web viewing
    Well this work has found the attention of someone in the East Lansing (where MSU is) city council. They would like me to throw together a short little video to be played at bars in East Lansing after the MSU mens basketball tournament games.
    I have done a few tests simply taking the uncompressed Final Cut exports and making a DVD in iDVD out of them. The results, while OK, aren't the best. I'm thinking there isn't much I can do there because I'm not working with the best source material (going through a number of compressions - Tivo, DVD recorder, iDVD, etc).
    But one thing I did notice though is my fancy iDVD created menu looked pretty slick with the video scaled down. The video was crisp and clear.
    Is there a way to scale my video down so that it doesn't play full screen? Almost doing a 4-sided letterbox. I'm envisioning the video scaled down, centered on the TV.

    Yes, I think I understand what you want to do...
    You can scale the video down or up to pretty much any size you would want to use;
    When your video is in the timeline, double click it, and it will open in one of the video preview windows (I belive its called the "viewer" window), for me on my dual screen, its the one on the left;
    A few tabs will appear at the top of the the Viewer window, Video, Filters and Motion; Click on the motion Tab...
    When there the video will disappear a time line where keyframes live will appear, since you have not used key frames in this clip for motion, there will not be any there;
    You will see to the left of this a few pull downs, Basic Motion, Crop, Distort, Opacity, Drop Shadow and Time Remap;
    When you have the basic Motion twisty selected, you will see, Scale, Rotation, Center and Anchor Point;
    The one your interested in for what I belive you wan to do is Scale. You can click in the box that defaults to 100 (meaning 100 percent) and change this to anything you want.
    By changing it this once it will make the entire clip play at that new scale. You can get creative and keyframe it over time using the little diamond shape button with the right and left arrow on each side. You can add a key frame at any point int he time line; and it will scale (in this case) to each setting you have set a key for. It interpolates the scale at each point in the time line when you set different scales etc... you can fiddle with this and get some good ideas for other projects if you want;
    For what I belive you asked for, no key frame is required as you want it to start and finish att he same reduced scale.
    I trust this helps you out, and hopefully I read your question correctly;
    p.s. if you leave the Center at 0, and 0 it will be centred, but its important to note you can use that to chance the position of the video in the video frame, again not needed for your request - but handy to know....
    tk

  • Why haven't I been able to watch YouTube videos for months? :(

    I'm hoping someone might be able to shed some light on this issue I've been having...
    I have an older MacBook Pro (bought July 2007) running OS 10.4.11, that hasn't been able to access YouTube or YouTube videos for the past several months. When trying to access the website on Firefox or Safari, the page takes forever to load and I get the "Connection has timed out" error. I've tried loading it on several different wireless connections, none of which should have any firewalls/proxies set. Embedded YouTube videos don't show up (there's just a blank space where they should be), and embedded HD YouTube videos will show the first frame but will not load or play.
    I've never had any problems with YouTube before, but didn't turn my computer on between Feb and May of this year (I was traveling). I figured I must have missed some important update. But I'm currently running the most recent versions of Firefox (3.6.9) and Safari (4.0.3), Adobe Flash (10.1), Quicktime (7.6.4), and Java (v9 for OS 10.4). Updating these hasn't helped any. I also reinstalled Firefox entirely.
    I don't have any issues loading any other websites, or playing/viewing other kinds of embedded videos, or any other videos. As far as I can tell, my internet browsers don't have any firewalls or blocks set up. Other laptops and desktops on the same wireless connections I've tried can access the site and embedded videos without issue.
    Does anyone have any ideas as to what else I could try? I'd love to be able to get back on YouTube...
    thank you in advance!
    -Ann

    I understand that you can not access youtube website at all .. this can be due to a variety of reasons ..
    what you describe looks like a dns resolution error .. try this
    go to terminal and type
    sudo nano /Private/Etc/Hosts
    you will be prompted for your password ..enter it and note that your input won't be visible ..
    if all goes well you will see something like this :
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting. Do not change this entry.
    127.0.0.1 localhost
    255.255.255.255 broadcasthost
    ::1 localhost
    if you see that try adding these lines EXACTLY AS YOU SEE underneath that page
    74.125.43.103 youtube.com
    74.125.43.103 www.youtube.com
    and press control and X together on your keyboard
    now back at the terminal type exit and hit return
    reboot your machine ..
    see how it goes
    hope this helps

  • How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

    How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
    After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • I have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing

    i have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing a song while he is checking his phone. how do i get rid of it????

    If it happens again the make sure that you aren't suppressing website colors.
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *https://support.mozilla.org/kb/Options+window+-+Content+panel
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • Why does it take so long for FCPX to render video for the various Apple Devices?

    It took 12 hours from FCP X to share 1 hour of video for iPad. It took over an hour to share a 3 min. video from FCP X via the new Compressor for iPad. It takes appreciably less time if I choose the DVD option (which now gives an error message in FCP X) or export as a Quicktime video.

    Only an idea but 1.4Gb to 22.5Gb hmm well that may take a while as it's having to make the file bigger add information to it? But the bigger the file to a smaller size the longer things will take. Always use compressor though it's a professional compressor well the last version was anyway and your MacBook Pro is fairly powerful. do you have it plugged in when performing tasks like these as It may be that performance is reduced slightly to conserve battery life but I'm not 100% sure on that but if you haven't I'd give that a go.
    J

  • What is the best way to export a video for broadcast using FCE?  H264?

    I need to get the best quality HD video for broadcast using final cut express and I need to know all info and settings please?

    Hello,
    You need to find out from the broadcaster what specs they require you to meet.  H.264 is probably not it.

  • What is better when converting analog video for FCE, Canopus100/110/300/or5

    All,
    What is better when converting analog video for FCE, Canopus100/110/300/or500? I have a new MACPRO with FCE HD and I wanted to convert some of my older video that was recorded on a HI8 Camcorder... Thanks.

    I have the ADVC-100 (older model) and ADVC-110. They are identical except that the ADVC-110 does not come with an AC power adapter. Currently sells for about $220USD. If all you need to do is convert from HI8 tapes, the ADVC100/110 will do the job quite nicely.
    The ADVC300 adds some enhancements for video signal cleanup, but at a higher price. Currently sells for about $450USD. The ADVC500 is overkill for home use.

  • I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box?

    I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box to prove It's ok for me to make ad revenue from my video?

    Yes, you can use GarageBand loops for commercial purposes. Here's the Apple Doc:
    http://support.apple.com/kb/HT2931
    (Basically the only thing it excludes is to re-distribute the loops as loops.)
    I don't know about the YouTube form, maybe you just fill in "Apple Loops", they certainly have come across this before.

  • What is the best way to format Videos for ipod touch?

    What is the best way to format Videos for ipod touch? Used Quicktime Pro/ Export (iPhone setting). Videos aren't as crisp as downloaded Videos. Compressors /ipod video Setting also looks crapy (with bitrate med & High). What should I use?

    Visualhub is a transcoder with multiple input and output formats with specific setting for iPod,iPod touch. Costs around $19-used to work great but recently everything I convert suffers audio crash than closes out the player. Hopefully they will fix it.
    Elgato H.264 hardware transcoder is $99 dollars(USB stick that plugs in to Mac)-speeds up encoding of any file quicktime can handle, settings for apple tv, iphone/touch, ipod,Sony PSP. Worth the cost if you transcode a lot of video for the Touch or own an elgato HD tuner. Files work flawlessly and look great.
    Mpeg streamclip-free. Works great, has presets or can customize the output.

Maybe you are looking for