Videos freezing but the sound still goes on?

Any video except Youtube videos freezes/stops moving the frames as it's paused at some random point but the sound and the timer/slider/scrubbing tool/bar still goes on with the sound.
Please help!
It happens at random times, random sites and browsers. Also it happens in random places in videos too. Usually at the very first seconds though.
1-) I have tried different browsers,
2-) Tried other sites,
3-) Other resolutions and varietys of videos,
4-) Flash Player (Puffin and Photon),
5-) Resetting my internet settings,
6-) Power off and on my ipad,
7-) Googling this problem.
Steps of the problem:
1-) Can watch the first seconds/minutes perfectly.
2-) When I try to slide forward it automatically stops/freezes the visual/frames but the sound and the time still goes on.
3-) It happens when I don't slide forward too.

Hi,
Is it a Plug-n-Play or Plug-n-Pray headphones ? Have you installed its driver ? Can you see it in Device Manager ? If Yes and Yes you have to disable the internal speaker and enable the headphones using the speaker icon at the bottom right (Playback devices).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Videos Freezes but the sound still continues.

Hi all, I don't know what my problem is, I've uninstalled and reinstalled many times, I"ve deleted all history and cookies, it affects all browsers. I need help.
My problem is that the screen would freeze but the sound and the indicator on the bottom would still, but only for a few second, then everything is frozen.
I either have to move my mouse arrow over it to get it to move again or wait for the little window that says flash player plugin has failed and then refresh.
I use a small window and have it overlap a small edge of the video keeps it from freezing, don't know why.
I"m at a stump here.

I am facing the similar issue does apple has any fix for this for iPhone 5 user, the biggest issue is that my iPhone 5 lags which has never happened it's similar to that of android, can Apple give iPhone5 user the option to get back to iOS7 or Fix this so called LAG issue ?

I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8 BBC IPLAYER

I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

HT201343 my video plays but the sound only comes out of my computer not my tv???

my video plays but the sound only comes out of my computer not my tv???

I have tried to connect and Jambox and have the same problem; bluetooth speakers are connected and chosen but sound comes out of computer speakers.

After upgrading to ios 7.03 my ipad freezes, but the clock still works

Hi, after upgrading to iOS 7.03 my ipad freezes, but the clock is still running. So i reset it and it works again. I'm using the logitech solar keyboard folio with it. It has worked flawlessly before the upgrade. It seems to happen intermittently. When it first happened I had the keyboard lock on. Then the screen was black, but when connecting it to my pc, itunes could recognize the ipad and I could backup everything. It happened occasionally, so I removed the keyboard lock. This seemed to help at first, but now it freezes anyways. Only difference is I can see the background and my apps on one of the pages. And the clock is running.
Help much appriciated.

Both of you please choose the correct forum to start a new topic thread. Classic has nothing to do with iOS.
Site map of Communities and Categories

Movie slows down, but the sound still ok....

HELP!
The first part of a movie I completed plays sluggishly, choppy but the sound is playing fine. As I move it towards the end of the movie, that part is playing smoothly. When I opened it, I usually drag the playhead(?) up and down the timeline to quickly advance to a part I want to see. Maybe I altered something? Is there a way to adjust a frames per second or something? Please help!

Hi Ramon
Do You have a lot of audio clips in this movie (> 100) - or -
Where do You store Your:
- Mac OS + QT
- iMovie program
- iMovie movie project
OK I saw that You have an iMac G4. But I just reason. And I don't know
what kind of hard disk that-one has. 4800 rpm or faster ?
When stuttering - it sometimes depends on the hard disk performances.
eg. using a miniMac + storing all on the internal hd + > 100 audio-clips
will demand a lot of the hd and in most of the miniMacs there are a rather
slow one.
Using external hard disks can be even more problematic. I did:
use an ext FW hd with all on it = lots of problems and mainly audio sync troubles.
- One can export out the audio as on .aiff file then use this to replace all
audio-clips to make things roll more even. 100 clips becomes 1 clip.
Yours Bengt W

My ipad has completely blacked out but the sounds still work what can i do

Hello I have an ipad that has completely went hay wire and and the screen has completely turned black. But when I turn the ipad on the sounds work and everything. Can you guys or gals please help me out by answering my question of how to make my ipad have color again and not be completely black.

Try to reset it. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot (presuming it does)

DVI = Active but the moniter still goes to sleep for no reason.

1. Product Name and Number
Don't know, some 20" moniter from HP
2. Operating System installed (if applicable)
Windows 7
3. Error message (if any)
No error message, it just goes to sleep like a lazy ass.
4. Any changes made to your system before the issue occurred
No, bought it brand new.
That's basically it, I have a DVI cord plugged in and the moniter knows that, but it just goes to sleep even though I have it plugged in.

See here for logind.conf and here for upower output.
Last edited by cphyc (2015-01-06 19:20:29)

Parts of my iMovie freeze (but the sound continues) once exported to iDVD

After completing a movie on iMovie, I have exported it to iDVD and 'Movie' formats then burned them to disk, but both movies freeze in exactly the same place whilst the audio runs through as normal.
When I play them in imovie they run as normal.
Why is this?

Some possibilities:
Check out this thread for a possible solution: http://discussions.apple.com/thread.jspa?messageID=7305234&#7305234 Perhaps renaming the file would help.
I don't know if ithis has an effect on the file, but why is it saved in documents rather than music or movies?
Also, are you using iTunes to convert the file to .aiff? Here is the procedure from iTunes help:
*Choosing AIFF and WAV custom import settings*
If you use AIFF or WAV encoding, you can use custom settings for greater control over the quality and size of imported files.
To choose AIFF and WAV import settings:
1. Choose iTunes > Preferences, click Advanced, and then click Importing.
2. Choose AIFF Encoder or WAV Encoder from the Import Using pop-up menu.
3. Choose Custom from the Setting pop-up menu.
4. In the dialog that appears, choose settings:
Sample Rate: The number of times per second the music waveforms are captured digitally. The higher the sample rate, the higher the quality and the larger the file size. Don't choose a sample rate higher than the rate used to store the music originally or you'll waste space. CD quality, for example, is 44.100 kHz, so choosing a higher rate when you're encoding from a CD is unnecessary. In general, the best choice is Auto, which uses the same rate as the original music.
Sample Size: The number of bits used to store each sample taken as the music is encoded. The higher the sample size, the better the quality and the larger the file size.
Channels: If you don't have stereo speakers or if your audio files are monaural (mono files are about half the size of stereo files), choose Mono. If you'll be listening through headphones or a stereo system, choose Stereo or Auto. Auto converts monaural tracks into mono files and stereo tracks into stereo files.

FMLE streaming @ HD, video freezing but audio still works. ??

Hi all,
We are trying to some HD streaming using FMLE 3 and a Osprey 700HDe card.
We can get the HD input in @ 720p no worries.
Once the stream is pushed up to our CMD and embedded in the webisite we can view the video.
Thats all ok.
It plays fine for a while and then the video freezes but the audio continues to play. It clears up after a while but its a pretty constant problem every minute or so.
We tried some suggested methods like turning of hardware acceleration in the flash player.
And even pushed the buffer out to 1 minute.
No luck.
Its more noticeable at bitrates above 2000kbps.
We would also like to push the res and bit rate higher to deal with full 1080p.
But we would lik it to handle this lower quality first.
The processor is not running under too much stress. Around 35% and our internet is more than sufficient. 60mps down 5mps up.
Any ideas??

I think problem is in your network conditions. Please check the RTMP buffer at FMLE. Is it increasing. You can check this from Statistics Panel at Publishing tab.
This could be due to network latency at between your client and FMS side. Please check it using Ping command. If this latency is beyond certain level then also you can also see RTMP buffer increasing and Video stalling at subsciber side

Using time remapping w/AE CS4 to freeze time/video freezes but not audio

Ok I do alot of editing of sports. One thing I like to do is freeze the moment when a special play is about to happen, highlight the player (via masking), then resume play. I had no problem with this in CS3. Now when I use the same workflow in CS4 the video freezes but the audio doesn't. So when I play it back I see the video freeze BUT the audio is still playing...hence now my audio is not synced up with the video. Didn't do this in CS3. My workflow: from PP -rightclick clip- replace w/ AE comp- AE loads my clip in a comp- I enable time remapping- extend the duration of the comp by 5 sec- find the point I want to freeze-set a key frame-copy key frame to origninal position- now I have a 2 second freeze between 2 keyframes. When I check the comp in PP the video freezes where I want it to but the audio keeps playing during the freeze....even after render. Thoughts?

Hi,
I'm also having the same problem with CS4 version. I'm using Mpeg4 file shot on my canon 60d and it's freezing the video in places and continuing the sound. The whole clip is just over 2 mins and I don't have any effects at all.
Does anyone know how to solve this please???
Cheers!
Shan

When watching netflix on appletv is goes black but the sound is still there

When watching netflix on appletv after 5 mins it goes black but the sound is still there and only resumes if I rewind or fast forward and then sometimes just goes back to the home menu

Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

Once in awhile my screen will freeze while I'm watching a video. Lately it's happening more often, I'm watching a video and it'll freeze BUT I can still hear the dialogue. Only solution I've found so far is to do a hard shut down. HELP!!

Once in awhile my screen will freeze while I'm watching a video. Lately it's happening more often, I'm watching a video and it'll freeze BUT I can still hear the dialogue. Only solution I've found so far is to do a hard shut down. HELP!!

Hi there, im also having this problem, i tried running most of the games on my system, and some that are considered "high end" games, are giving me the exact same problem, but other games are running and im able to message fine, i also got some friends to send me messages, and i can recieve messages perfectly, also i noticed moving the actual window around on the screen or just closing down skype also lags. I have 16GB of ram and 4.4Ghz Octa-Core CPU, i checked my load while on the high end games and it there was more than enough hardware usage left like normal for skype to run, and skype wasnt taking any extra up than before. I also checked by bandwidth and i was having no problems with that as skype would lag even on offline games.
I have tried re-installing under a different directory and still the same problem persists, this has only been a problem within the last 24hrs and i haven't installed any other programs that could affect this at the moment.
*UPDATE* I tried downgrading to an older version of skype, 6.3.0.107. Problem Still persists

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR

I have a Panasonic FZ38 HD camera. I can load and view my hd movies onto iMovie with no problems via my camera or a card reader. When I try to copy my hd videos from my old Windows pc to my new iMac, the picture speed has doubled but the sound is normal.

I have a Panasonic DMC-FZ38 HD camera and have lots of hd movie clips stored on my old Windows Pc using Photofun software supplied by Panasonic, which I want to transfer to my new Imac computer. I am able to copy my most recent movies that are still on the memory card from my camera onto Imovie and view them with no problems at all. When it comes to copying my old existing hd movies stored on my Windows Pc (and which are no longer stored on a memory card), I discover that when I view them on the Imovie, the speed has doubled but the sound is normal. In order to transfer my old movies I have copied them back onto a memory card (SDHC - the same card as previously used) and then put the card back into my camera and then copied them onto my Imac via the camera USB. I have also used a card reader but get the same result. If I view the same movie through my camera, or look at it on my old pc, it plays at normal speed. Does anyone have any ideas as to why this is happening please?

have you read and watch the Tutorials..? :
http://www.apple.com/ilife/tutorials/#imovie
iM is a bit.. iffy, when it comes to the definition, what a 'camera' is. historically, only tape based machines were a movie-camera. nowadays still-cams allow movin' images too..
but, as mentioned above: the intended workflow is: material from photo cameras (even when they move) => import via iPhoto; material from video cameras (even when they don't move.. ) => iMovie
when the import is done, you'll notice in all iLife apps the 'media browser' - in iM09, on the very right, the icon with a camera on.. click it, presto, all (incl. your 'videos') your iPhoto Library at hand for usage in iMovie.
watch this:
http://www.apple.com/findouthow/movies/imovie08.html#tutorial=otherimport
(about from midths of tutorial...)

Videos freezing but the sound still goes on?

Similar Messages

Maybe you are looking for