Videos freezing then no audio

i just loaded some movies and videos onto my 60gb ipod that were converted using imtoo dvd to ipod software. everything was working fine but now suddenly my movies freeze momentarily after about 20-40 seconds. then resume playing but the audio is gone. if i go back to the menu then play the movie again the audio returns and the movie plays normal again for 20-40 seconds then the problem repeats. the movies worked fine before and work fine in itunes and i also tried restarting my ipod. just before the problem started i upgraded the ipod software to 1.1, could that be the problem ?any help?

You DO NOT have to restore, there are ways to revert back to 1.0 without restoring:
Put the ipod in harddisk mode
edit the file (hidden folder and file) use a hexeditor, I think you can open it in notepad, but I have seen that it is better to use a hexeditor
\iPod_Control\Device\SysInfo
Replace the line that have the word "buildID" with this line:
buildID: 0x05908000 (6.0)
run iPod Updater 2005-11-17.exe or iPod Updater 2005-10-12.exe (both have the same software version for ipod video 5th generation)
iPod Updater 2005-11-17.exe can be downloaded from:
http URL
appldnld.m7z.net/content.info.apple.com/iPod/ww/win/061-2225.20051128.PDWnw/iPod Setup.exe
Select upgrade (with this options you dont delete the songs or videos inside the ipod, if you select restore you lose all the content inside the ipod)
After that, you have your IPOD with version 1.0 and you can watch your videos without a problem again

Similar Messages

  • I am using imovie 09 and when I try to play the scenes from my hd camcorder video freezes then voice freezes and bar keeps running to the end.  Does anyone know how to fix this? PLEASE!

    I am using imovie 09 and when I try to play the scenes from my hd camcorder the video freezes then audio freezes and the play bar keeps going with no video or audio.  How Can I fix this???  PLEASE HELP!

    Up front I would say the short answer is "no"... but the long answer is "sort of".
    Replicators are part of the Fractal "arsenal" and Motion definitely has those, but I think you would be very hard pressed to come anywhere near the type of fractal imaging as in the Electric Sheep example.
    I was able to squeeze the following out of Motion (the base element is a simple square), but by the time it got this far, Motion wouldn't play faster than about 1 frame every 5 or so seconds. At a certain point, you end up having to render movie files in order to see it in action (and that took Motion about 8 minutes for a 12 second project [09 iMac i7].) [If you're interested, I posted a short video of these here: http://www.youtube.com/watch?v=l6Fe_ydfAss. The segments are longer than 12 seconds each because these are designed to loop @12 seconds and each one was looped more than once.]
    [You asked the question on the 4th - I "finished" this on the 7th... (I admit to several "false starts")]
    If you have a faster mac than mine, you might be able to do more than this... and you really don't have access to the Maths that fractal apps have, so depending on your creativity for devising the "root" motif element you may (or may not) be disappointed in what Motion has to offer (it *will* try your patience!) If you would like to experiment anyway, I will explain some of the techniques I used for the above (which are, at best, rudimentary!) Once you get the basics down, you should be able to take off in your own directions.
    HTH

  • Using time remapping w/AE CS4  to freeze time/video freezes but not audio

    Ok I do alot of editing of sports. One thing I like to do is freeze the moment when a special play is about to happen, highlight the player (via masking), then resume play. I had no problem with this in CS3. Now when I use the same workflow in CS4 the video freezes but the audio doesn't. So when I play it back I see the video freeze BUT the audio is still playing...hence now my audio is not synced up with the video. Didn't do this in CS3. My workflow: from PP -rightclick clip- replace w/ AE comp- AE loads my clip in a comp- I enable time remapping- extend the duration of the comp by 5 sec- find the point I want to freeze-set a key frame-copy key frame to origninal position- now I have a 2 second freeze between 2 keyframes. When I check the comp in PP the video freezes where I want it to but the audio keeps playing during the freeze....even after render. Thoughts?

    Hi,
    I'm also having the same problem with CS4 version.  I'm using Mpeg4 file shot on my canon 60d and it's freezing the video in places and continuing the sound.  The whole clip is just over 2 mins and I don't have any effects at all.
    Does anyone know how to solve this please???
    Cheers!
    Shan

  • Windows 7 64 bit: I just upgraded Firefox to 7.1 , I can't watch video on youtube, video freezes, then the browser freezes. I right click on the icon showing the page is open on the taskbar & click close then cancel, it starts then freezes again?

    When I watch any video on youtube, every video first starts with short freezes then freezes the Firefox 7.1 Browser window. I have to right click on the icon that shows the browser is open on the taskbar at the bottom of windows and then click on close& cancel to get it to start working again. Also, on any site, I am having problems with links & functions that suddenly stop working, site connections being dropped frequently for no reason, my Modem is stable & internet shows connected. On facebook when I click a button(photos) it doesn't work, in Amazon I click on "submit" and the button stops functioning, in yahoo mail I can click on a button to "send" mail and it won't work. I can open them in IE9 or Chrome but not in Firefox. I have tried disabling all plugins.I also have tried disabling all but flash and still the problems persist. I have uninstalled and reinstalled FF.

    Command + R *should* take it to a recovery console. Command + Option + P + R resets the PRAM, but that doesn't sound like your fix.If all of your buttons are working fine on OSX side, I would ignore PRAM / NVRAM / SMC reset tricks, since these are tested as working fine. 
    I would say you should probably reinstall the drivers for bootcamp. I tried this with 5 in Windows 8 and it gives you an option to repair. The reason I say this is because the UI isn't showing up, which means that it's using another driver.
    If this doesn't work, go into device manager and then roll back to your previous settings.
    One more thing comes to mind. Do you ever use Parallels or VMWare to load your bootcamp partition? They have their own driver packages which can cause some unwanted behavior when using windows natively.
    One last thing you can do is try to by-pass the GUI powerplan entirely. You can use the Powercfg command, which, as it happens, has instructions on how to forcefully set the brightness values. You probably won't be able to make it through these instructions since you will get an error at some point, but that will give us more diagnostic information.
    Good luck!

  • After exporting on FCP, quicktime video freezes with perfect audio.

    First off, this is my first video I've exported with FCP.
    I made the video, edited and everything with no problem. When I exported, however, a 10 second clip would turn every color of the rainbow and flash, but the audio was perfect.
    After researching a little bit I used compressor and it somewhat solved my problem. It went from colors, to freezing. Again the audio is fine but the video freezes for the duration of the clip.
    I'm lost at this point.
    Thanks!

    Without any information regarding original material codec, seqence settings (codec) and output format (codec), it's just generally useless guesswork.
    x

  • Quicktime videos freeze then resume playback

    I am experiencing a problem when Quicktime plays videos. The videos freeze for a few seconds, then resuming play.
    I have a Dell Inspiron 6000 with Windows XP.
    I began experiencing this problem 3 days ago when I updated my software to iTunes 9.0, until then everything worked fine.
    Since then, I have repaied iTunes, Quicktime, uninstalled and reinstalled all the software; nothing has helped to improve this problem.
    If anyone can help me any, it would be greatly appreciated.

    While in Quicktime, click "Edit" > Preferences > Quicktime Preferences. Then click the "Streaming" tab and make an adjustment at the bottom in the "Instant-On" area so there's more of a delay.

  • HELP! Videos freezes then iPod resets.

    can somebody please help me? my iPod was working fine before but everytime I try to play a video, it randomly freezes at a random time and my iPod just resets by itself. i've tried everything from downgrading the firmware, restoring, using different USB cables, you name it! I have spent approximately 7 hours trying to solve this problem and I am having no lucks whatsoever. If someone has a solution please post some advice before I get a hammer and break this iPod.

    Well, My problem was also started by the updater. Then XP would freeze and restart then fail to completely restart until I disconnected the ipod. This would happen ever time I connected the ipod to the computer via firewire or usb 2.0 ports. I finally tried to hook up the ipod to a usb 1.0 port and the computer worked fine. I then quickly used the updater again on my ipod and when I was done I used add/remove programs and removed the updater. Since then computer and ipod both work fine.
    So, with out knowing all your specific details... try hooking your ipod up to different usb ports and try the firewire hook up to see if that makes a difference. You can look through these posts and find a lot of people with this problem and I sure what worked for me may not help you.

  • Video freezes during playback--audio is fine

    I recently recorded a 3 minute broadcast using VC3 on a new Dell (Vista) laptop. I was able to review the broadcast and everything seemed fine. After publishing, however, the final video now freezes at 25 seconds. The audio continues to play, but the video does not. I opened the VC project and the same thing now happens there (freezes at 25 seconds). There are no transitions or changes at the 25 second mark in the project, so I'm not sure why it happened. I've tried to publish again as a different file type, but nothing changed. I have done a few other projects that were the same length or longer on this same computer and have not had any issues. I'm looking for a way to fix this problem without redoing the project. Is there a way to? Or is there a way to get the raw video feed from wherever it is on the computer and drop it into another project?
    Thanks!

    Thanks Randy,
    Yes, I have captured in DV, down-convert from HDV. The image, for the most part, plays on the external monitor, but occasionally freezes...while it continues to play on the computer monitor. this problem is getting worse over time. I've been trough all the usual suspects from overlapping windows & timelines through trashing FCP preferences and repairing permissions on the hard drive. I've even reinstalled my OSX Tiger and Final Cut (twice actually as at one point I lost my boot drive & had to replace it) I have two different decks, and it doesn't matter which deck the firewire goes to, the monitor freeze happens with either one. ( I have no problems capturing, by the way) Since this is the second HDV project I have had on this equipment and did not have this problem on the other project, I am beginning to wonder if this might be a hardware problem.
    Any ideas??

  • Long videos freezing then startin again with no sound on my 60 gig

    whenever i play a long music video or a movie, the ipod just freezes, and then starts up again, but with no sound. the only way i know how to fix it is to press menue and then the select button to start it again, but its a big pain for movie to freeze every 30 seconds or so. anyone with the same problem or with suggestions?

    You need to restore your iPod back to firmware 1.0; firmware 1.1 has a bug with 60GB iPods where the sound freezes after 30 seconds; You need to uninstall iPod updater 2006-01-10 and install the old 2005-10-12 iPod updater; This updater came with the disk that came with your iPod; or if you don't have it, you can download it from here iPod Updater 2005-10-12
    after you have installed the updater; plug in your iPod and once it shows up; restore it; this has been the only solution to fixing the video problem. Hope this works

  • HTML5 videos freeze after loaded, audio keeps playing

    This started happening some months ago in my old laptop and it also occurs now in the new one. A lot of times, when I play an HTML5 video (not just in YouTube, it also happens in Streamcloud for example), after it's fully loaded and I start playing it, it will stop (on YouTube the "loading" animation appears), and the audio will keep playing. The only thing I can do is mute it and reload the page. Whenever it happens, it usually happens again after a while, and it's really frustrating to have to reload a few times after it's loaded to be able to watch a 1 hour video.
    My laptop has two video cards, an Intel HD integrated one and a dedicated NVIDIA GeForce. It doesn't matter which one I use or if I turn hardware acceleration on or off, the issue persists.
    What can I do?

    Check that all of your software is up to date.
    Also, post the web address where you are having problems.

  • FMLE streaming @ HD, video freezing but audio still works. ??

    Hi all,
    We are trying to some HD streaming using FMLE 3 and a Osprey 700HDe card.
    We can get the HD input in @ 720p no worries.
    Once the stream is pushed up to our CMD and embedded in the webisite we can view the video.
    Thats all ok.
    It plays fine for a while and then the video freezes but the audio continues to play. It clears up after a while but its a pretty constant problem every minute or so.
    We tried some suggested methods like turning of hardware acceleration in the flash player.
    And even pushed the buffer out to 1 minute.
    No luck.
    Its more noticeable at bitrates above 2000kbps.
    We would also like to push the res and bit rate higher to deal with full 1080p.
    But we would lik it to handle this lower quality first.
    The processor is not running under too much stress. Around 35% and our internet is more than sufficient. 60mps down 5mps up.
    Any ideas??

    I think problem is in your network conditions. Please check the RTMP buffer at FMLE. Is it increasing. You can check this from Statistics Panel at Publishing tab.
    This could be due to network latency at between your client and FMS side. Please check it using Ping command. If this latency is beyond certain level then also you can also see RTMP buffer increasing and Video stalling at subsciber side

  • Audio skips back few seconds while video freezes

    Hi,
    We are running FMS 4.0 to stream on-demand MBR videos using the OSMF player. We have noticed that occasionally during playback the video freezes, while the audio skips back a few seconds and starts playing. Once the audio catches up, the video unfreezes and resumes normal playback.
    Any ideas on what might be causing this and how to debug?
    Thanks.

    I looked at the logs and it does look like there was switching going on when this issue occured.
    Could you expand a bit more on what you mean by "switching issue" and "exact same timelines" ?
    Also, how could I go about verifying that the different bitrate streams have the same "timelines"?
    Thanks,

  • Full screen videos freeze - computer doesn't

    Hi everyone,
    Whenever I try to watch a video in full screen mode (YouTube but other streaming sites as well), the video freezes. The audio keeps going, I can click the buttons on the bottom bar of YouTube videos, for example, although they do not move as they normally do. I can exit full screen mode by pressing Escape or the button on the video and when I do, the video has moved on just like the audio has, and everything seems to work fine. It's the video in full screen that freezes, not the computer itself.
    I hope someone knows how I can solve this!
    Regards,
    JMS7.

    you can't buy a gpu as such, as this is soldered to the motherboard. You would need a motherboard change.
    But you can purchase a post warranty maintenance agreement (as said by mark_lenovo in the first post in that link), and then get the laptop fixed once the warranty is activated. This will be the cheapest way to fix this issue (if you want to still use your laptop that is).
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Video Freezes Momentarily During Import

    I am capturing video from my Canon GL2 into my MacBook Pro with Final Cut Express v.1.0.1. During import, video will freeze for a second or 2, but I can still hear audio. If you playback the clip once it is imported, it plays back just the same, with the video freezing and the audio uneffected. This happens almost every time I import. Any idea what I can do for this?
    MacBook Pro   Mac OS X (10.4.8)  
    MacBook Pro   Mac OS X (10.4.8)  

    Hey Al,
    I changed the Easy Setup to 48khz and it still freezes between 30 and 50 seconds into every import I do. Could this have something to do with my camera heads? Or is it a RAM issue on the MacBook Pro? I am also having problems when I try to batch capture into Final Cut Pro 4.5. It will capture the first clip, but then when it goes to capture the second clip, it gives me the error message "TAPE STILL TRYING TO THREAD". So I am guessing that the problem is most likely with the Canon GL2. Any other suggestions?
    Thanks.
    Jason

  • Streaming DVD Video Freezes

    I have a number of DVDs on my NAS. When I stream them via cable everything works perfectly.
    When I try to stream them via wireless connection (AEBS "n) after a couple of minutes the video freezes - then audio stutters, but does continue. If I wait then the video jumps forward and then freezes again.
    I did not have this problem prior to upgrading to Leopard.
    Any Ideas would be greatly appreciated.
    Thank you

    Some additional information.
    When I copy a file from the NAS to a wirelessly connected computer I get a transfer rate of >8 Meg per sec. When i stream the DVD I get around 1.5 meg per second.

Maybe you are looking for