Videos get stuck-stop-loose sound and start again--all in 30 sec.

hi friends
i have been using the video ipod since a month.i use videora to transcode videos..but today i dunno why but exactly after 30 sec. the movies get stuck for say 3-4 sec. and then i loose sound but the movies play from where they left..
i restored my ipod to factory settings but the problem still continues..i'm using the latest version of the software and i dunno whatz wrong all of a sudden..please help
  Windows XP  

no i did not..but how will that help
It won't. I'll make it much worse. Stick to the 1.0 updater that came with your iPod and don't upgrade to 1.1.

Similar Messages

  • When digitising video gets stuck, then pushes video and audio out of sync

    i am digitising from a deck rack, which is hooked up via a patch bay, with 2 J30-1 digi decks and 1 HDV deck. These are all connectable to my mac via some patch cables.
    Recently when digitising, really only over the past two days, no matter which deck or tape format I am coming from, the video in my capture window gets stuck on a frame, and ends up capturing this frame until the tape jolts itself out of this frame.
    When I review this clip, the video frame will stick, and then the audio is out of sync with it.
    This happens on both digi's and DVCams, I am confused as to why this is happening, haven't seen it before.
    Any ideas much appreciated
    Lianne

    not positive, but sounds like a hardware issue.... try going from source to machine and eliminate hardware..if it works...you've got a hardware issue.
    i'd test each deck direct. then reconnect it to patchbay...much more intensive, but at least youd eliminate many issues. it might even be a bad cable. i had a similar experience with a bad firewire cable...so maybe you start with the cable running to your machine.....for me i'd go direct and eliminate issues step by step source to capture.

  • My I phone 4s wont start correctly. I turned on audio reader and it just gets stuck on lovk screen and i cant enter my phone

    I starrteaudio reader and mi phone wont start it just gets stuck on lock screen and is slow

    Hey tessatony,
    Thanks for the question. I understand that your iPhone 4s is not functioning properly, and that you wish to try to make a backup before troubleshooting. From the information you have provided, it sounds like the device is indeed turning on and responding when plugged in, however the display is not lighting up. Have you attempted to plug the iPhone into a computer with iTunes? If iTunes recognizes the phone, you can attempt to back it up:
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    Afterwards, attempt to restart and/or reset the phone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If your issue persists, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    Apple - Support - Service Answer Center
    http://www.apple.com/support/iphone/service/faq/
    Thanks,
    Matt M.

  • I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    There is only one thing that happens -- the Server does not respond.
    Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
    Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.

  • When will apple stop being stubborn and start supporting flesh video?

    When will apple stop being stubborn and start supporting flesh video? I cannot fully use CNBC or Bloomber, for example, on IPAD. This is really not how to treat your customers

    I believe Apple is all about innovation, simplicity & thinking of the box. Adobe Flash is an old technology - which over the years has not been developed or succeeded with a better offering from Adobe, leaving behind an application that is slow, buggy and a resource hog. When Apple creates technologies it thinks about future, which is the key to success. Like everyone you too should moved on. HTML 5 is the way to go.

  • Apple TV won't load up. the light flashes and the logo appears on the TV then it just goes off and starts again. I've tried restoring via USB on 5 different computers and I keep getting error message 9? Can anyone please help?

    I have a black Apple TV that has recently stopped working. It loads the Apple Logo on screen then goes off and starts again. It's as if it is stuck in a loop. I've tried a re-boot and this has failed. I have tried a restore using a USB cable on 5 different computers, including a Mac Book Pro and it downloads the update file but when it tries to restore I get the error code 9 showing on screen. I just can't get it to do anything.
    Can anyone please help?

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

    i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

    Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
    Clinton

  • YouTube videos get stuck

    When I am playing videos on YouTube, almost all the time the video gets stuck a certain scene, while the audio continues playing. Then after a few seconds the video also starts playing, but this happens again on the same video a few seconds later

    You might also want to try running a scan for malware. I was having the same issue and couldn't figure out why, but once I ran the scan, I had a lot of malware and deleted it from my computer and ever since then my flash players have been running near to perfectly.
    If you do not have a malware program here is a site that could be helpful. You can download a free version of MalwareBytes that is always good.
    http://www.malwarebytes.org/
    Hopefully this helps!

  • What will happen if oracle listener is stopped and started again.....

    Hi Gurus,
    Please suggest What will happen if oracle listener is stopped and started again on a running SAP System ?
    Thanks in advance.

    Hi Lakhbir,
    What will happen is that, all SAP work processes will loose connection to the database.
    If any active jobs(background jobs, updates, insert to database ) are running, they may fail. All the work processes will go to a re-connect state.
    ( There are few notes on WP reconnect which you can check and read about)
    DB Reconnect Parameters - SAP High Availability - SAP Library
    Application will be running but users will not be able to do any activity or may not be able to login at all and may get errors  like ( No connect to database possible)
    As soon as you start the listener process again , all the work processes will connect to the database again.
    This is because the WPs will keep on trying to connect to database at regular interval and as soon as the connection is available they will re-connect.
    You do not have to restart any work process manually in SM50 or anywhere else as this feature is enabled by default until disabled manually.
    Thanks
    Amit

  • Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

    I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"  when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
    Anyone?
    Thanks

    Hi Stan.
    I had the same problem as you did though I am using Adobe CC.  I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version. 
    Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup )  first and updated my NVidea card to no avail.  Eventually what did the trick was this...
    After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it.  Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again.  I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care.  That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
    So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
    Let me know if this works.
    Cheers and good luck

  • I have a 2007 Macbookpro and it started up with gray checkered boxes ann across the screen I tried to re load OSX and it work 1 day and started again is this a hard drive problem or Video?  Now as it starts to load a screen comes up saying to restart

    I have a 2007 Macbookpro and it started up with gray checkered boxes and across the screen I tried to re load OSX and it work 1 day and started again is this a hard drive problem or Video?  Now as it starts to load a screen comes up saying to restart over and over again

    I'd suspect this known issue:
    http://support.apple.com/kb/TS2377
    if you have a late 2007 MBP.
    The only testing you can do at home is to attach an external monitor and see if the defects repeat on the external. If so, get to an Apple store. If the computer's video chipset fails a test the Apple Store will perform, you get a free logic board replacement. Turnaround is usually one day to one week--not bad at all.
    If the defects do NOT repeat on an external monitor, then the problem is not covered by the above Repair Extension Program
    The issue is heat-triggered. Be certain that you control heat once you get it fixed. Don't use the computer in your lap without a lapboard; don't block the vents under the display hinge; don't us in clamshell mode, etc.

  • TS4062 HELP!!!  When I try to sync my iPhone with iTunes it gets stuck at step 2 and goes no further.  I have iTunes 10.6.3.25.  It happens all the time.  I have Windows 7.

    Please help.  Every time I try to sync my iphone with itunes it gets stuck at step 2 and just spins.  I have iTunes 10.6.3.25 installed.  I've even shut down and rebooted.  Nothing helps.

    Based on what someone else said, I am getting the "rotating ball of eternal sadness".  Yup.  That about describes it.

  • Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

    I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message :  "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
    PLEASE HELP!

    Hi Delarey,
    Please go to the following location and rename the folder to old_folder name
    User/user  library/Application Support and rename Adobe folder
    User/user library/Preferences and rename the Adobe folder
    Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
    Make sure that you are in user library if you are not sure check the link below.
    Access hidden user library files | Mac OS 10.7 and later
    Regards,
    Vinay

  • Has anyone else experienced the stopping and starting again while  playing music in iTunes.  It was fixed but with the last update it has started skipping again.

    Has anyone else experienced the stopping and starting again whil playing music in itunes.  It was working fine wit the prior fix, but after the last update
    it started skipping again. 

    Try it in another vehicle see if it still happens, at least you can narrow it down to your  phone or the car. My 4s play totally fine, I have never had any of those issues. Maybe its time to restore your phone and start over. I would also have someone else play their Iphone in your car, see if it happens to them. Or try yours in someone elses car. Good Luck!

  • How stopping a version and start a new one from the previous

    Hi,
    May be someone could help me to erase my basics questions on Robosource control.
    We have to manage several versions of our product documentation and It is not clear how it is managed by robosource control. The documentation tells what can do RBSC (and it seems to be what we need) but they do not explain how to do it (prerequisites, ordered steps, etc), and I do not really succeeded. May be I missed the basics.
    All our projects are added to Robosource control 3 from RoboHelp7 Html from a local directory.
    In the database, we inserted them in a directory corresponding to a version V01.r01.
    I would like to stop this version and start a new one V01.02 with the projects which are V01.01. What is the best way to do this:
    Do I just label the directory V01.01 and "Pin" it ?  In that way how can I recover all the projects and files that were labelled and pinned for version V01.01, if I need them later ?
    Copy and rename directory V01.01 into V01.02 to continue the file modifications without modifiying the same project in V01.01?
    My questions are quite similar to Kristen's questions.
    Please can anyone help ! Thanks !

    Then the (App) tabs from that window are lost unless you can restore an older copy of the sessionstore.js file (Time Machine?) that has that lost window.
    *http://kb.mozillazine.org/sessionstore.js

Maybe you are looking for

  • Open and dispaly XL file in IE with java

    Hi all, I need to display XL file in the browser. Here the problem is,In JSP I am providing one link, After clicking the ling I have to create one XL file and dispaly the XL file(open and display) with out clicking another link or button. I wrote one

  • Report with stored proc running multiple stored procedures with insert statement

    Hi, I wonder if this is possible in SSRS ... I use the 2012 version (Data Tools). I have a report that triggers a stored procedure. See below. Within this SP there are 2 insert statements getting data from 2 other SP's. When I make a dataset referrin

  • Reading a text-file from within a Jar-file...

    I've made a program, that reads from a text-file. And it works great. But when I try to put the program into a jarfile, I get a fileNotFoundException... I have the textfile both inside and outside the jarfile... with the same result. Does anyone know

  • Portlet Chart error message with page parameters

    I have a perplexing problem. We're using portal 9.0.4. I've created a chart from a sql query using the portal builder tools. It's a complicated query with two parameters that have default values defined. The chart will run as a portlet from the porta

  • Problem with Main window in smartforms

    Hi All, I am creating a smartform, in that i need to restrict the no. of line item is to 15 and i need to draw a box for it. My problem is if i am displaying 15 line items the box will be drawn correctly and if i use only 3 line item then the box is