Videos go black at some point during playback.

Partway into a video it blacks out. I was at this site:
http://www<i></i>.peachpit<i></i>.com/podcasts/episode.aspx?e=25305e87-f3ae-4522-b97f-0d679d09a1b2

These are the only messages in the console:
Using //@ to indicate sourceMappingURL pragmas is deprecated. Use //# instead jquery.js:1
Use of getPreventDefault() is deprecated. Use defaultPrevented instead. jquery.min.js:3
Use of getPreventDefault() is deprecated. Use defaultPrevented instead. jquery.js:3
If I have another site's page open in a separate tab parts of that page get blacked out. If I have a separate window open (to make sure I could log in to support) the input fields won't work then I click somewhere else on the page the whole thing goes black. I have to close all sessions of Firefox to get it working again. I have no problems with Internet Explorer [cringe]. My OS is Win 7 x64.

Similar Messages

Randomly skips/fails to play some samples during playback?

Randomly skips/fails to play some samples during playback?

You're right that was foolish let me clarify.
Raising the I/O buffer thing is a good idea, i've tried that already though and no joy
BASICALLY i've had this problem with a couple of tracks, ones which i have worked on the longest and probably the ones with the most effect plugins and tracks used. Seemingly at random during playback some of the samples dont play (and some even stop playing halfway through the sample). If the regions are bounced, the resulting wav file visibly splits the original sound where the computer 'decided' to stop/restart playing the sample. Again, i haven't found a pattern: - at one point a four bar loop with three tracks solo'd would play all the tracks perfectly during playback for a few seconds, then suddenly switch to only playing one track, then switch back after another few seconds.
Weird.
I think it may be related to previous experience which i have had with the Space Designer and Echo effects, where the echo or reverb sound itself cuts out halfway through the sound/after a seemingly random amount of time (and then cuts back in).
I've seen this reverb and effect problem on more than one computer, but the original problem with the track playback is, in my experience, unique to my system.
The computer i'm using is not old or at all running out of memory (although i realise this does not exempt it from being the cause of the problem)
Anyway this has been trolling me for weeks and its driving me mad
Thanks
OP

Adobe Flash Player don't show videos on YouTube after some point - Black Screen only

Hello. I have a problem with Flash Player on YouTube. It has crashed many, many times so I decided to open this thread for let you know about it if you don't know already.
Now, I've got no crash reports or anything but it crashes after some point. Even if it doesn't give me crash report, I understand it because YouTube videos don't run and I got only black screen. When I tried to close (click "X" at right above) Firefox, it denies to close with some click sounds. I can only close with combination of CTRL+ALT+DELETE and terminate process. After I closed Firefox and open new page, it works fine until I get the same situation.
By the way, I have laptop with these specs:
Intel Core i5 3210m
AMD Radeon 7670m + Intel HD 4000 ( with AMD Switchable Graphics called Enduro )
8 GB Ram
Windows 7 Ultimate 64 bit
I don't know what problem is causing it so I couldn't give you much information. But if you need any information, I'll try to help. Thanks in advance.
P.S: I'm sorry for the bad English.

Thanks for your reply. I totally forgot the topic, sorry.
I've solved the issue, just disabled hardware acceleration feature from Preferences menu and everything is working well now.
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html

Video downloaded directly to iPhone stops during playback

I downloaded a video from the iTunes store directly to my iPhone 3Gs. Now during playback, it stops
at a particular point and will not continue playing. Of I try to drag the scrubber forward in the video, it snaps back to the point where it stopped. What could be the problem with this?
Thanks in advance for any assistance,

find the file in iTunes (you may need to sync it if you downloaded directly to the iPhone), then click on it, and then click on "file -> get info" on the menu bar. go to the "options" tab and see if the "end time" is something besides the actual end time of the file. that's the only thing i can think of that would cause this issue.

Video track randomly glitching and hanging during playback

not sure if this should be here or in the compressor forum, appologies for that....
I am building a fairly simple DVD with the main track being 35 minutes and then the "bonus features" consisting of one track with about 12 chapters and stories for the "play all" button...
Anyways, the extra features seem to play fine but the main track seems to be randomly glitching and/or hanging up during playback...sometimes near the beginning, sometimes near the end, totally different experiences on different DVD players as well as the same player at other times...
Does anyone have any ideas as to where I might begin to diagnose this? I have built many similar DVDs in the past but have not encountered this before and need to be quite confident in the master before we press 10,000 copies!
I have encoded all media in compressor using "90 Minutes Best Quality" setting..

Whoa!!! I'd back up here and make sure you have your "T" s crossed before your continue with 10,000 discs! What were your bitrates for the main track and Bonus features? Did you use AC3 audio? DVD has a bitrate ceilings of 9.8 for video. Its also important you check your bitrates in a viewer to makes sure your OK.
Bitrates are the most crucial part to control in DVD.
http://www.videohelp.com/tools?toolsearch=bitrate+view&Submit=Search&s=&orderby= Name&hits=50&convert=&dvdauthorfeatures=

Videos on 5G iPod - some points

This forum seems increasingly 'choked' with problems with getting videos onto the new iPod ... just thought I would share my SUCCESSFUL experience!
To keep it brief - downloaded Handbrake, used an appropriate width resolution under picture settings i.e. 320, having detected chosen volume etc. etc. and chosen the chapter (if this bits too vague there are LOADS of other posts re using handbrake), this generated a nice .mp4 file BUT fir a while I could not load this into iTunes .... SO ....
Simply changed the file extension to .m4v, ignoring the cautionary prompts, dragged into iTunes video page and was able to play them in iTunes .... BUT ...
Couldn't actually play them on the iPod ... SO ... after much head scratching clicked on the CONSOLIDATE LIBRARY option et voila ... SUCCESS ... correctly loded onto iPod ... sounds good, looks good ... what a gadget!!!!
Hope this might help someone out there!

Find a post on here that is called "My Experience with Apple IPOD Video 60GB (Black)", you will find everything you need to answer your question here. You can use "Videora IPOD Converter" to do your video conversions of both Music & DVD Movies etc. However, before you will be able to convert a DVD Movie using the "Videora IPOD Converter", you will have to run another program against the DVD movie called a "DVD Decryptor". Do a search on google for "Videora IPOD Converter", you will find all your answers to all your questions there. I know, I use it and have Movies/Music Videos on my IPOD. Works great! Despite peoples complaints about it. I think they only complain because they don't know or do not understand how to use the software properly. I have not have a problem converting music/video's or DVD's since i've been using the software in the past 2-3 weeks since installing.

Way to "shutter"/"mute"/black screen TV display during playback

I am wondering if there is a way to "mute" the TV display while playing music through my Apple TV. Our one year old is totally attracted to the music information screens and I would like to turn off the picture while playing music. Any insight on that?

If you have a set with standard RCA inputs you could potentially connect AppleTV via component/HDMI to see and select the audio, but have a pair of analogue red/white RCA cables on an alternate input for audio without the yellow composite or S-video signal - audio but no video.
A workaround for sure.
Perhaps better to use external speakers or amp/receiver for audio/duties.
Don't forget possible Airtunes function to stream music to AppleTV from a computer either direct or using iPhione/iPod touch to control the audio.

Multi-room DVR Issues: Unable to locate hub, interrupted recording, skipping during playback

Hi Guys,
I was wonderng if you could help me. I have been a FIOS customer for many years and have a multi-room HD DVR and 2 HD set-top boxes. I have always had some problems during playback on some recordings where the picture and sound will skip, but over the last several months some new problems have appeared. Frequently during playback of recorded shows the recording will stop playing and I will get a message on the screen "unable to locate hub". I then have to power off the STB, reboot and when I go to the dvr option I have to refresh the devices before connecting to the dvr again. If this happens while a show is recording then the recording stops and then restarts causing the show to be split into 2 recordings. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. 1 other note that might help troubleshooting is that I can't seem to display the IMG in full screen on the dvr.
Thanks in advance for your help,
Sincerely,
Randy R.

uncorrdinated wrote:
Hi Guys,
..I. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. ..
Thanks in advance for your help,
Sincerely,
Randy R.
You can only do 1 playback at a time UNLESS you are playing back from the DVR/HUB. If you want to do 2 simultaneous play backs, one of them must be from the DVR. I ran into this same message when my wife would watch a recorded program in one room and I would try to watch a recorded program in another room. Fixed it by moving the DVR to one of the rooms where the conflict occured most often. As for the "unable to locate hub" message. This was a very common problem about a year ago, which was fixed with a software update. You need to check what version software is on all your boxes.

Premiere Pro CC 2014 - Black flickering lines during playback and when exporting video

I am fairly new to Premiere and have recently started using creative cloud on my new MacBook Pro retina - 2.3 GHz Intel Core i7 - 16GB Memory - OSX Version 10.9.4
I shot a music video using my friends camera and all the shots were absolutely fine, I dropped them into Premiere and started editing the video together.
Some of the clips are perfectly fine during playback, although sometimes my playback stutters a little, but some of the clips have strange horizontal lines that flash through them when I watch it back. I have only used basic things such as the highlight/shadow and sharpen tools in Premiere. I thought that it maybe fine once I exported the video but when I open up the exported file on my desktop in Quicktime the little black flashes/glitches are still there in some of the shots.
Here is a screenshot you can see a line halfway between the top of my head and the top of the screen, when you watch the video there are lots of these flashing about.
Could this be something that I have set up wrong?
CPU/GPU related?
Thanks,
Jordan

Hi there,
thanks for the reply!
GRAPHICS = NVIDIA GeForce GT 750M 2048 MB
I tried that but it didn't work unfortunately, Mine was already set to the one you said, I tried the other but no change

Video losing sync with audio during playback

I am having a unique issue with FCP 6.0.6.
We are using this version to log and capture a switched video feed with audio
through a Black Magic DeckLink HD Extreme 3 PCI card. Capture works fine.
But during playback the next day, the video seems to drop a frame, or lose sync
(you can see it visually) then continues playing. The result is the video is now
out of sync with the audio.
We do a weekly 3 camera shoot which is webcast, and then later uploaded to youtube.
We have been running this setup for a number of years without issue, but this has started
becoming an issue the last 3 weeks in a row with no change to our setup.
The webcast does not experience this, which makes me think there is a sync issue
between my switcher and my FCP machine.
Any thoughts or ideas?
Mac Pro
3GHz Quad Core Intel
16 GB Ram
OS 10.6.8

Are you ABSOLUTELY sure there was NO change? (All sorts of problems can occur if you haven't turned off automatic updates.)
In any case, you might want to run Preference Manager from Digital Rebellion (free) to delete the FCP prefs. Sometimes they get corrupted and can cause some funky behaviors.
Otherwise, sounds like a question for Blackmagic technical support.
x

Zoom in and pan trough video during playback?

Hi,
is it possible to zoom in and pan trough video files during playback on iphone 3gs? I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback? Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
Thanks

I is it possible to zoom in and pan trough video files during playback on iphone 3GS?
Yes.
I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback?
Yes. Three-fingered double-click to turn it on or off. Three-fingered drag to move the zoomed image.
Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
The video will have been compressed for use on the iPhone, so zoom may help, but it won't be able to show detail that was lost in the compression.

Shaky video during playback

I have some HD video I shot with my Cannon T1I that I converted to AIC files using MPEG Streamclip. After doing some editing in FCE, I used quicktime to view the files. During playback of the footage I noticed the footage was shaking quit bad, which made it hard to view. I've done this process before without the shaking, so I'm not sure what happened.
I converted the files to AIC files and used 29.97 fps.
Any help would be appreciated!
Thanks,

I wonder if this the case as I had the resolution qualities mazes out. I'll watch them again in full screen mode and my tv to compare.
I do have perian installed. Not sure if I've updated it since snow leoppard.
Thanks guys!!

Some fields in ADF application are responding during playback

Hi All,
I'm facing some issues when playbacks the script which was recorded ADF application. Mainly 3 fields are showing this abnormal behavior. For combo-box `adf.table(..., .....).rowSelect(3);` is used to select value, but it's not working during playback. For date field the date picker I used is not working during playback. One Text field is also showing some issue. Value of text field is not get set during playback and it leaves it blank and passes the run. There are also other fields, including many Text fields, but all of them are working except the 3 above mentioned..
Please help me, if any one knows solution for this. Even if you don't know solution please share your ideas.
Regards,
Deepu

You give us no clue about what you used to record/playback scripts

NO AUDIO during playback after converting the VIDEO using Creative Video Conver

I have a ZEN 2GB/4GB/8GB/6GB/32GB.
I tried to convert video from a dvd using Creative Video Converter.
The video is fine but there is no audio during playback.
What am I doing wrong?

"If this is the case, the original video file may be in a format that contains muxed (multiplexed) audio and video, and cannot be exported with audio."..."If the format is "MPEG1 Muxed" or "MPEG2 Muxed," the audio portion of the file may not be retained with QuickTime Pro or iMovie."
I have read that article and I thought it ment that the sound will work after you convert to the MPEG4 format, which I did.
Are you saying that if it starts out as "Muxed audio" then there is no way to convert it?
If that is the case then in what situation would you need to use the Videora Converter?
Thanks,
Sean

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

Videos go black at some point during playback.

Similar Messages

Maybe you are looking for