Videos Imported from iPhoto Cannot Play in Photos

Hello,
I just upgraded to Photos and accepted the default setting to convert my iPhoto library to Photos/iCloud format. All went fine without errors and I see that Photos created an entire duplicate on the iPhoto library.
The problem is I cannot play any videos in Photos that came from iPhoto. I get a dialog message indicating "Cannot Play File, Photos cannot play this video. Do you want to try opening it in QuickTime Player?" Similarly, Quicktime Player reports it cannot play the file and prompts "To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More."
The videos where imported to iPhoto from my iPhone 6. There does not seem to be a difference between standard video or slow motion video files.
My software versions are;
Mac OS X: 10.10.3 (14D136)
iPhotos: 9.6.1 (910.42)
Photos: 1.0 (209.52.0)
iPhone 6 IOS: 8.3 (12F70)
According to the App Store, my system is fully up dated. How can I restore the videos to work in Photos? Is there another method for importing the iPhoto library into Photos?
Thank you,
Jeff

Thanks for that. Good to know.
Just to add my own two cents to this thread—I have also experienced problems with video files. These fall into two categories:
Videos that were imported as thumbnails only ("Photos cannot play this video because it cannot find the file"). These all seem to be AVI files. I can locate these files in my old iPhoto library, but when I try to import them into Photos, it tells me that this type of file cannot be imported. No error message of any kind was shown during the migration. (This is not at all helpful.)
Videos that were imported, but that won't play in Photos. Photos gives me the option to open them in QuickTime. Depending on the file type, QuickTime does one of two things: (1) Converts it to a format that it can play (which takes ages, and if I save the file, I lose the metadata) Or (2) tells me it can't play it.
There also seem to be files that were converted during the migration. The originals in the iPhoto library are MPG files, while the ones in Photos are MOV files. But they won't play in Photos, and they can only be opened in QuickTime after conversion (within QuickTime).
I've also encountered videos that were shot on an iPhone 4S that won't play in Photos. Not sure what's up with that.
It's important to note that THESE WERE ALL VIDEOS THAT PLAYED JUST FINE IN IPHOTO.
So now I have to go over all my video files (4600 of them) and figure out which ones are problematic (600 AVIs for sure, unknown number of MPGs and MOVs), convert them with Handbrake, import the converted files into Photos, and then manually fix the metadata (date and time, location doesn't bother me so much).
If anyone has any tips that will either spare me this long and tedious process or speed it up somehow, I'm all ears.
Don't get me wrong—I think that Photos is overall waaaaaay better than iPhoto (it's actually usable—I don't have to suffer the spinning beachball for 3/4 of the time it is open). But the migration process is really sub-par. If you're going to just not import a whole bunch of files, at least tell me so I can do something about it.

Similar Messages

Lightroom: Capture time for videos imported from iphoto is not showing in metadata

Hi, I imported all my photos and videos from iphoto to Lightroom recently using the iphoto import plugin. I think all my photos were imported but I noticed that all my videos have no capture time, so they became grouped together in my collections. But I think I can still see their capture time in the "grey text" in each photo. Why did this happen and how do I resolve this issue? I really want my capture times to be in the video metadata and also want to see my videos in the right chronological order with my videos. Strangely, videos imported into Lightroom directly from my camera SD card do not have this issue, only the ones imported from iphoto do. Thanks!

LR does not properly handle video metadata in general, and in particular it often botches capture time. Sometimes this works: Select one video, do Metadata > Edit Capture Time, and then click Change All (without actually changing Corrected Time). If that sets the capture time to the correct time, then you can select all the problem videos, do Metadata > Edit Capture Time, and click Change All. If you have a small number of videos, you can manually correct the capture time using Edit Capture Time.
Please see this thread in the official Adobe feedback forum for more details, vote on it, and add your opinion: Lightroom: Metadata applied to videos in Lightroom isn't available in other applications

IMovie importing from iPhoto cannot do?

I cannot add photos from iPhoto into my iMovie 9.0.2 project?? I see the photo button but it is grayed out on both the project browser and the Window menu where "photo" is also grayed out. What gives???

I believe I found the answer to my prior post (cannot import iPhotos into iMovie). I had created a trailer project in iMovie 11; and apparently you CANNOT import photos from iPhoto into a iMovie trailer project!! Once I created a normal project I can import. Somewhat weird as you would think one should be able to import iPhotos into any iMovie project one created in iMovie... oh well.. live and learn

How do I import video clips from iPhoto if it doesn't recognize the video clips in iMoive

I'm trying to make a movie using iMovie and I recorded some clips using a Sony Digital Camera and iMovie won't let me upload the video clips from iPhoto. I try to import them but when i try to click on the file, it won't let me. Like its not bold like other files (It will let me upload video that were taken with my iPhone) I have iMovie 09.
What do I need to do?
Thanks!
Ayca

Do you plan to put each video clip in iDVD to be playes separately? If so then here's how:
1 - open iDVD and select your theme.
2 - click on the Media button at the bottom right and then on the Photo button at the top.
3 - in the search window type in ".mov" (or the extension of the video clips you plan to use).
4 - all of the video clips with the extension you entered will be displayed and you can drag them into the menu area at the left.
Another way would be to put all of the video clips in an Album and click on that album to view and drag the clips:
Remember, the order that they are added to the menu will be the order that the buttons will highlight when you scroll thru the buttons with a DVD player remote.
This will give you a menu with a separate button for each video clip (up to 12 in a menu with some themes).
If you want to play all of the clips one after another you could create a slideshow in iDVD with the "+" button at the bottom and drag the video clips into the slideshow as you would still photos. Set the slide duration to anything but manual and don't apply any transition.
That will let you play all of the clips sequentially.
OT

HT4437 Set up Apple TV no problem..Music plays just fine..But I cannot play my photos from my MacBook.

I got Apple TV today ..All is fine..BUT I cannot play my photos through the computer to the TV..
I have a MC OS X 10.6.8 all updates are current .. THE ICON THAT ALLOWS AIR PLAY is not on toolbar ..It is on iTunes toolbar..
But not on iPhoto..
Friends have a more recent Mac and it appears on their toolbar..
How do I get the photos form my library to play on the tv through the appletv?
I have been hard wiring the computer to the faltscreen abd wan to do it with wirelss?
ANY HELP APPRECIATED TO THE MAX or MACS.....

Hello MACSAL,
Congratulations on your new Apple TV! I found an article with steps you can take to share your photos with your Apple TV from your Mac (the steps say 2nd generation, but these steps also apply to 3rd generation of Apple TV as well):
To view your photos using Apple TV:
To view photos using Apple TV (2nd generation), you need to have Home Sharing turned on in iTunes and on your Apple TV, your computer must be on, and iTunes must be open.
For information about turning on Home Sharing, see iTunes Help.
Open iTunes, and choose Advanced > Choose Photos to Share.
In the window that appears, select Share Photos From, and choose a source from the pop-up menu.
Choose “All photos, albums, Events, and Faces” or “Selected albums, Events, and Faces.”If you chose “Selected albums, Events, and Faces,” select the albums, Events, and Faces you want to stream.
Click Apply.
Using the Apple Remote that’s paired with your Apple TV, choose Photos from the main Apple TV menu, and then choose My Photos.
You can find the full article here:
iPhoto '11: View photos or slideshows on iPod, iPhone, iPad, or Apple TV
http://support.apple.com/kb/ph2437
You also mentioned that you are not seeing the AirPlay icon in the tool bar. The reason you are not seeing the AirPlay icon is because AirPlay Mirroring became available with Mountain Lion (OS X 10.8). The following models support AirPlay Mirroring if running Mountain Lion:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
You can find more information here:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Thank you for using Apple Support Communities.
Best,
Sheila M.

After importing from iPhoto, how would you eliminate the photos?

I have installed Aperture adn like it quite a bit. I imported from iPhoto (which copies over the pictures...not move.)
I have backed up the photos in iPhoto to an external hard drive in case Aperture blows up on me and I need to go back to iPhoto. But now that I have done that, what is the suggested way to get all those pictures out of iPhoto? so I can get back that disk space.

Maybe I'm missing something, but what's wrong with simply deleting and then emptying the trash?

RAW JPEG PROBLEM I'm new to Aperture and neglected to mark RAW JPEG pairs when I imported (from iPhoto). Now I have two images for each photo. Help!! How can I change this?

I’m new to Aperture and neglected to mark RAW+JPEG pairs when I imported (from iPhoto). Now I have two images for each photo. Help!! How can I change this?

How did you import from iPhoto? If you saw the Import panel with raw -jpeg pairs, then you probably did not import your iPhoto library as library, but as files, and then you will see plenty of duplicates - previews, thumbnails, originls, edited versions. If that should be the case, it would be better to delete the import from iPhoto and to import your iPhoto library again, but this time using "File > Import > Library".
Only that would require compatible versions of iPhoto and Aperture. What are your Aperture and iPhoto version numbers?

Photoshop 11 elements editor limits imports from iPhoto to 4 photos

photoshop 11 elements editor limits imports from iPhoto to 4 photos?

Yes. It's been that way for some time now, even with other external editors. You can send a report to Apple via http://www.apple.com/feedback/iphoto.html.
OT

I started to get duplicate files each time I use iPhoto browser, it used to be only on videos, now, on every picture I import from iPhoto.

I use iPhoto to I import my pictures from my iPhone or iPad. Only because of the ability to remove at once all the imported ones from the iPhone/iPad.
Each time I use the iPhoto browser in the import process.
Each time, I get a duplicate file when import videos. Two files, stacked. Now, I started to get the same on each picture. Two pictures, of each one imported from iPhoto.
I never edit them from iPhoto. The pictures or videos, just go from the iPhone, to iPhoto, to aperture. Never touched or edited.
Why, a I getting twice the pictures when they come to aperture?
I'm not an expert, I could use some help. My concern is that THIS DID NOT HAPPENED BEFORE, only on videos, now, it is for everything.
If someone can help, I would be very grateful.
Federico

Hello,
You can think of the shift registers almost as local variables. They are used to store information from the previous iteration of the loop to the current iteration. In the example that srikrishnaNF posted, he has basicalyl implemented a state machine architecture to control the different options. Once the file path it set, it is saved for the next loop iterations within a shift register until it is updated with a new path. The first case structure determine whether you want to write to a file or not. The second case structure determine whether the user needs to be prompted for a new file path, or whether it is still writing to the same file. This is indicated by looking at the true and 1 case. Here, the user wants to write to a file and the file path has been selected in the true and 0 case. In the true and 0 case, the user has selected a file, the 0 has been changed to a 1, and you then enter the true and 1 case. In this case, the value is kept at 1 meaning that the user will not be prompted for a new file path as long as the write to file button remains true. Once the write to file button switched, you will enter the false case. This case resets the 1 to a 0 and will cause the user to enter the true and 0 case when the write to file button is clicked again.
-Zach
Certified LabVIEW Developer

Wrong photo will import from iPhoto window

During the normal course of editing, all of the photos that were in the movie were overprinted with a random movie clip still. The thumbnails in the project window still show the intended photo, but only the new clip still will show during playback. By right-clicking the photo and doing "Show in Finder", the correct .jpg file is referenced. When I try to drag the correct photo back in from the photo media window, a photo will be brought in, but it will be one that appears a few spots away in the list from the intended one. The thumbnail remains the correct photo. I believe something has become corrupted in my iMovie project that will not show the correct photo, even though the program is internally pointing to the correct photo. Very frustrating, as I have lost many days of careful editing. Made a copy of the project and have tried many things, to no avail.
Anyone have an idea? Is there a parameter file or something that I can delete that will reset things? Thanks very much.

The distortion/blurriness may arise due to the size of the photo being imported from iPhoto.
iMovie HD 6 appears to have problems handling very large photos - these should be resized (not cropped) in iPhoto before being imported to iMovie HD. The process is described in this post by Karl Petersen on 14/04/2007:
http://discussions.apple.com/message.jspa?messageID=4389924#4389924
Karl describes the process very thoroughly (as always) in Point 3 of his post.
Doing as Karl suggests may not, of course, help in your particular case but it's certainly worth a try.
John

How do i import video clips from iphoto to iMovie

how do i import video clips from iPhoto to iMovie

I've found dragging & dropping onto desktop & then drag & drop into iMovie works okay

I don't want to import video clips from iPhoto!

iMovie automatically imports video clips from iPhoto, and I don't need or want this to be done. I don't want to delete or move those clips from iPhoto, so is there a way to prevent the automatic transfer?

Go to your Hotmail account on the web (NOT in mail), make a new folder (or folders) for the mail you want to keep and move the messages into it.
Mail (and all other email clients) will download all messages in the inbox unless previously downloaded. That means downloaded with the client you are attaching now.
Until that is done do not setup the account in mail.

All the photo i import from iphoto (JPEG) to imovie is blank.

Hello..!
I need some help..!
I using powermac G4 cube, i just upgrade to tiger n ilife 06, when i want to import my photo from iphoto to imovie all the image is blank. But i unclick the ken burn effect, i can import the photo i have image...!
Got someone know how to solve the problem..!
Thank..!

I appreciate all of your responses to my problem. There is no doubt that I have a lot to learn about Aperture. I guess the first thing I need to do is learn the correct process to import my existing photo events from iPhoto. When I conducted the import operation, I imported by selecting my individual events from iPhoto browser. Is my problem the result of incorrectly importing from iPhoto? Where can I find the appropriate import steps into Aperture from iPhoto?
Several of you recommended that I may need to execute a repair against my iPhoto library. How do I run the repairs on the iPhoto library?
I am confused as to why every single photo is duplicated with one version being the original and the other as an edited version. I am confused since I have not attempted to edit all of my photos within iPhoto. Granted I have edited a few photos, but no way every single one. More than likely I am importing the photos incorrectly from iPhoto. I may try to import from my photo cards rather than attempting to copy from iPhoto. Perhaps iPhoto automatically sends two copies of the same photo to Aperture as a default???

Missing faces/places after event import from iPhoto to A3

Hello,
I am interested in switching from iPhoto 09 (8.1.1) to Aperture 3. I downloaded the Trial Version yesterday evening. I have a very big iPhoto library (28.000+ pictures) and I did not want to import all of them right now. I wanted just a few events in A3 to play around with it.
I imported 3 different events into A3 via File - Import - Show iPhoto Browser. I selected the 3 events and put them per drag & drop into project. The few pictures were imported really quickly but I have some problems afterwards.
1. All the pictures are missing the faces and places which I assigned them in iPhoto.
2. Except the pictures taken with the iPhone - they had the places assigned to them.
3. I do not have any issues with the keywords. They are all there.
First I though I made a mistake somewhere. So I tried this at my OneToOne at the Apple Store today. We did the same thing on their iMac and had the same issues. After importing an event we were missing the places and faces.
When I got home I created a new user on my MacBook and tried the same thing with that user account. I created a new iPhoto library (with a few pictures in it) and a new A3 library. I imported pictures with assigned faces and places and some pictures taken with the iPhone as well.
Every time I import a few events A3 does the same thing:
~ It imports the different events into different albums in one project.
~ All the photos taken with the iPhone will keep the places pin.
~ All other photos will loose their places pin.
~ All imported photos will loose their faces names.
~ All pictures will keep their keywords.
Does anybody else have this problem? Any ideas?

I'm having a similar problem with missing Places after importing from iPhoto 09 to A3.
After scratching my head over it, I created a new account on my Mac, imported some pictures from my camera and iPhone, and did some tests with Places. Here's what I figured out:
To retain the Faces and Places information from iPhoto, you need to use Aperture's
File-->Import-->iPhoto Library...
command, not the
File-->Import-->Show iPhoto Browser...
command.
My testing indicates that Faces were imported successfully, but Places are imported with caveats:
Places data was correctly imported for the following cases:
1. iPhone pictures with embedded GPS location.
2. Pictures whose Places location was assigned with the Paste Location feature in iPhoto.
3. Pictures whose location was individually assigned with the i (information) button and then manually searched for in the Places map.
Places data was NOT imported when the location was assigned to the entire Event in iPhoto. That is, rather than assigning locations to individual photos, I assigned a location to the entire Event, then that location information was NOT successfully imported into Aperture.
I have reported this as a bug to Apple. I hope this helps clarify the behavior for you.
...David

Trouble Importing from iPhoto

When I try to import a short video clip from iPhoto to iMovie (something I've done successfully many times) I get an "unknown error" message that says the clip cannot be imported. Any ideas?

One idea is to import the video clip without going through the iPhoto interface. Use iMovie's import command -- if that doesn't work, then perhaps the video file is .avi or something that iMovie has trouble converting.
John

Videos Imported from iPhoto Cannot Play in Photos

Similar Messages

Maybe you are looking for