Videos in email after upgrade

I made the upgrade to iOS5 with my iPhone 4.  After the upgrade I noticed that when someone sends me a video via email, after the video gets downloaded it will not play!  The video viewer loads but the screen stays black... any ideas?

AOL mail provider.  I have to click on Quick Look to make anynthing happen.  I then click "Open with WMV Player".  Screen is still black.  I click the PLAY button.
   I have sound but no picture.

Similar Messages

  • Cannot open survey files from email after upgrading SAP gui to 720

    Cannot open survey files attachments from email after upgrading SAP gui from 640  to 720.
    Tried uninstalling & reinstalling but still error persists,
    Error is : cannot split connection string: /h/server name/s/sapdp00 ( from SAP GUI security )
    Please advise.

    Can't say I have seen this error before but if it is pertaining to the new security module within 7.20, which are much more strict then 6.40, I would look under the SAP GUI configuration options.  Focus on Security > Security settings.
    There are pages and pages of rules which can be defined.
    A test could be to disable all of them on an isolated machine and set them to allow and see if your problem persists.  If the error is resolved, it is something in there you need to address.
    Regards,
    Zecher

  • TS3276 I lost the ability to send email after upgrading to maverick.

    I lost the ability to send email after upgrading to maverick.  Has anyone  else had this problem?

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

  • Excel file can't open via email after upgrading to OSX 10.9.2

    After upgrading to OSX 10.9.2, my Excel files are not readable when sent by email. My version for Excel is 2008 for Mac V12.3.6.
    I have no trouble opening Excel on my computer but cannot seem to send Excel files via email.

    Thanks. Tried that and it works but I had found another alternative.
    Didn't realise but my Excel file had the extension missing even though it was saved as xlsx. To solve the problem, I just clicked on 'Append the File Extension' when I 'Saved As' and it worked. Thanks for the alternative help anyway.

  • HD Steaming video now choppy after upgrading to 10.6

    Back when I was running 10.5 I could stream HD videos from Youtube, Hulu, etc without problems. After upgrading to 10.6 the lower resolution video plays normally, but once you go to 720p+ the processor usage climbs and the video starts to stutter. I run a 2.33 Core2Duo Macbook Pro, 3GB RAM, RadeonX1600. Flash is of course upgraded to 10.x, so it's not an issue there. I've seen plenty of discussions about this issue from my searching, but I can't seem to find any solution. Thanks in advance!

    I have tested with Safari and Firefox. After a TON of digging through Google I found an article that ultimately helped. I did a full uninstall of Adobe Flash player, then reinstalled the latest version. I don't know if it's newer than the one I was trying before this. After installing, I did a verify/repair permissions through Disk Utility. One of the permissions needing to be repaired was a flash player file. After this I ran Netflix at HD quality and it was much better. It wasn't 100% perfect, but I assume that was because of my "older" hardware. I'm going to mark this as solved, so if anyone else has this problem, give it a shot.

  • "manually manage music and videos" setting disabled after upgrading iTunes!

    Hello every one.
    I used to manage my musics and videos manualy , so naturally "manually manage music and videos" check box was always "cheked"
    Now after i upgrade my itunes to latest version (11.1.3.8), i find out that option is "Unchecked"!!
    So i am not able to copy any music or video or book too my iphon !
    If i try to enable that option again, it will clear my libraries and i will lose anything.
    Why this happened? what can i do ? any workaround? seems like a bug to me. i didnt do anything just updated my itunes. that option was enabled on my iphone for like 3 years! now i just upgrade my iTunes and that check box is unchecked.
    It seems stupid itunes think its another machine and says " it is synced with another library"
    Any suggestion please?

    Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
    I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
    Bythe way, here is how i fixed it :
    1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
    2-It showed a threating message that it will erase my music and videos ,......
    3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
    Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

  • Cannot view OWA email - after upgrade to Firefox 5.0, Outlook Web Access displays ASCII characters (garbage) in message body. Same issue with multiple servers.

    Email body of HTML or RTF messages are rendered in ASCII characters after upgrading to Firefox 5 when viewing email in MS Outlook Web Access (OWA) light from MS Exchange 2007 servers. Issue is repeatable with two entirely different Exchange systems.
    Text email renders OK. Work around is to forward email (in use MS-IE).

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • IPhone connections hangs when sending email after upgrade.

    After upgrading to 2.0 firmware on my first generation IPhone, the phone now regulary hangs when sending email via smtp. Even if I try to close the connection by putting it into AirPlane mode and back again it still hangs and from that point onwards doesn't check or send any new emails. If I then shut the phone down and restart it looses the email as it's not either in the sent or outbox folders. This has happened quite a few times since upgrading. Does anybody have any advice?

    Found this useful tidbit by mdwelsh231 on another thread:
    "I'm having this problem too. Rather than rebooting the phone, an even easier solution is to hold down the Home button for several seconds (I believe it's 8 sec) which will kill the Mail application and return you to the home screen. Restarting Mail (by tapping the Mail icon) will cause it to reconnect. I find that this resolves the connection hanging issue. However, it is still kind of a pain. I suspect a bug in the 2.0 iPhone firmware. "
    Worked for me
    Cheers,
    C

  • Can not receive email after upgrading to 5.0.1

    iPhone does not fetch the email from server automatically after upgrading  to 5.0.1 . I need to use mail APP in order to get my emails.  what are the possible fixes for this issue ?

    Got it to work after going around in the loop for a couple of clicks

  • Any videos slow/stuck after upgrading to new Flash 11.8.800.94

    After upgrading to the new flash 11.8.800.94 on Firefox 23, the videos are stuck. I have uninstalled and reinstalled any/all versions of Adobe Flash, but still the same issue. I went back to Flash 10.3 version For Windows and it works fine. But I am little skeptical in using it as it does not have protection for the swf security issues. Till then I plan to revert back to Chrome, as it as well as IE works fine with Flash 11.8 version. Pls let me know if you have any solution.

    I also have the same issue, which started last week. I am running FireFox 23 on Windows 7. Flash 11.8x (and also 11.7x) causes Firefox to hang when opening a web page that has flash content on it. This issue is not with the flash video content playing as the web site is hangs before I even have a chance to launch the flash video. I have to start task manager in Windows 7 to kill the firefox process to get control of the browser back. I also went back to Flash 10.3 and the web sites are fine opening, no issues. Please let me know if you have any questions.

  • Duplicate emails after upgrade to OS X maverick

    After upgrading to the new software, Outlook for Mac 2011 now duplicates emails everytime it opens and closes. For example, today I had emails in my inbox from over a month ago as if they had just been sent this morning for the first time. Does anyone have a fix?

    Me again. I've just been reading some of the other posts that are having the same problem and found this (see below) seems to have worked for a few people. I'm going to try it and will let you know if its worked or not.
    JoFr123
    Re: Mavericks and Outlook - repeated download of same emails 
    Nov 3, 2013 12:22 PM (in response to Swaby9)
    Hello,
    I have duplicate emails in Outlook since Mavericks install. Exiting the sleep mode (or exiting the screensaver) I found many time-out errors and Outlook re-downloaded every mails stored on the server.
    I found a solution:
    1 - Display information of "Microsoft Outlook.app" (located into the folder Applications/Microsoft Office 2011/Microsoft Outlook.app. (Select the Microsoft Outlook.app "file" into the Finder and press Command+I)
    2 - Check the box Disable/Prevent App Nap (On my french version "Empêcher App Nap")
    Because I am not sure that Office 2011 manages App Nap, I disabled App Nap also for Word, Excel and PowerPoint.
    I hope this workaround will work for you as well as it works for me!

  • Replying to email after upgrade to iOS 7

    Hi.
    After upgrade my iOS on my iPad i have a situation with my email, that when I reply I see the beginning old email "person 1 wrote:". In the past i had:
    From: person 1
    To: person 2
    Subject: blablabla
    Time:
    Etc
    How can I change it?
    Thanks
    Best
    Marek

    My iOS devices have always used the "person 1 wrote" format for replies. The full header format is used for forwarding.on both iOS6 and iOS7.

  • Cannot send email after upgrade

    after upgrading to latest OS no longer can I send email.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Mail showing attached pictures from previous email after upgrade to Mavericks

    My Apple Mail app is configured to show the email body in the bottom pane when I select an email in the email list in the top pane.
    I receive emails on a scheduled basis from a security camera.  The email contains attached pictures.
    THE BUG: After upgrading to Mavericks, when I am in Mail and am going from one email to the other, the image does not refresh to the image from the newly selected email.  It continues to display the images from the first email that was selected.
    Is this a known issue.  Has anyone else seen this?
    Thanks,
    Al.

    https://discussions.apple.com/message/23512376#23512376
    re index
    search not working so well: Try this: Quit Mail > then > Move ~/Library/Mail/V2/MailData/Envelope Index to the desktop > Re-open mail and see if that fixed it
    some are recommending above

Maybe you are looking for

  • Error while Exporting report

    hi,   i get an error when exporting my report. below is the stacktrace of it. please help me to sort it out. This happens only when i export the report as editable word... JRCAgent21 detected an exception: java.lang.NullPointerException      at com.c

  • In past versions of CVI, using OpenFile with no path meant to look in the local path (in other words the install directory). Is there a way to do this in CVI 2013?

    I use an .ini file to allow the users to change the bootup preferneces for the program. In the past that file lived in the install directory and OpenFile could cheerfully find the file and apply the preferences. In CVI 2013, the program seems to need

  • How to add new fields in vendor registation

    Hi All, I am Customizing a Standard BSP Page of supplier detail (SRMSUS) For that I have copied that page to a Z object . I have to add 2 fields in that Page. Anybody has got any idea How to go further. Do I need to change the class?? Any suggestion

  • Directory dialog in weborms

    Directory dialog in webforms I have oracle metalink note 74140.1 which describes how to implement get_file_name in webforms by way of a javabean.I have done this and it works ok and i get the file path back in my form.My question is , I need also a d

  • Can't shutdown, poweroff: machines reboots instead

    No matter which commands I use, systemctl poweroff, shutdown -h, halt -p, my machine will immediately reboot instead. Here are all journalctl lines immediately after calling systemctl poweroff: the system will tell me that it is going to shutdown, bu