Videos in shared icloud album don't load - 'The operation could not be completed'

Hi, I was wondering if anyone else had the same issue. A couple of days back suddenly the videos that we have posted in the shared album stopped working. Oddly enough they still worked initially for the person who uploaded the video and then they stopped loading altogether. Tried switching the photo sharing on/off but hasn't helped. Now all of the videos stopped loading altogether. It's very weird as my father who lives in another country can access all the content - so it seems it's still there in the cloud ?
Has anyone had a similar issue ?
Tried restarting, resetting settings - called apple support but no clue...
Michael

Similar Messages

Wi-Fi cannot watch videos message the operation could not be completed

Cannot watch video using Wi-Fi. Get a message that the operation could not be completed. I reset network, reset router, cleared history, closed apps, hard restart.

Video in an app? Over the net? YouTube? Facebook? In your camera roll? More detail would be helpful.

Shared videos won't play because the 'operation could not be completed'. Solutions?

I have recently shared some videos with some friends over iCloud photo share but they will not play because 'the operation could not be completed'. Is there a solution for this other than deleting and starting again?

mc,
In your first post you stated:
I checked permissions and nothing came up wrong.
Did you accomplish that by using "Repair Disk Permissions" in Disk Utility, or did you actually check the "Ownership & Permissions" of your Desktop Folder using the "Get Info" command in the Finder?
Click on your Desktop in Macintosh HD>Users>yourusername, and then choose Finder>File>Get Info. Under "Ownership & Permissions," it should say "You can {Read & Write}."
If that is not selected, then change it to "You can {Read & Write}."
;~)

"the operation could not be completed as there is no video"

Hi. I've been logging and capturing without incident for weeks now, from my JVC BR-DV3000 deck to final cut 5. Device control still works fine, so i know final cut is recognizing the deck, but all of a sudden when I set it to capture i get an error message that reads: "the operation could not be completed as there is no video". I checked all my connections and settings, refreshed external viewing options, and turned everything off and on again. And I just went back to see if it was the same for tapes I have already captured successfully in the past, and i get the same error message, so I know it's not the tape.
Has anyone ever gotten this message in his or her log & capture window? Thanks...

I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

I cannot "save" my newly reduced size video after using the "TRIM" feature...I get "The Operation could not be completed". Why?

I would start with my original AVI file, then hit duplicate to get a duplicate file to work on....I then would use the "TRIM" feature to shorten the video. Then when I hit "close", and it prompted me to name the newly reduced file, and saved it appropriately.So I did this procedure with two of my AVI format videos and it worked flawlessly.
But I have tried to do this same procedure with a half a dozen more AVI videos and it will not allow me to name the modified file after I have "trimmed it" and save it...when I enter the name for the modified file and hit "close", I get the message "The operation could not be completed". Why isn't it allowing me to save the files??
(I am working with OSX 10.7.3, Quicktime Player 10.1 iMac 3.06GHz Intel Core i3)

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

Can't find any discussions on this. Suddenly cannot stream video in Safari or Chrome on my iPad 2. The error is "The operation could not be completed." Rebooted cable modem and router, no luck. No problem with my PC. Help!

Suddenly I cannot stream video on my iPad 2. I get the error, "The operation cannot be completed." The browser (Safari or Chrome) continues to try to load the video with no result. I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem. I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck. (How do you do a "hard reset", I forgot?) Frustrating since I don't own a TV and am an Al Jazeera addict! Help!

Suddenly I cannot stream video on my iPad 2. I get the error, "The operation cannot be completed." The browser (Safari or Chrome) continues to try to load the video with no result. I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem. I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck. (How do you do a "hard reset", I forgot?) Frustrating since I don't own a TV and am an Al Jazeera addict! Help!

Cant save video "The operation could not be completed" Help!

Ok so i have tried saving a video i captured earlier today. and it keeps failing. I have tried saving it to the desktop, and i have tried exporting it to the desk top. and nothing works. it plays back fine. but i can't save it??? i have no idea what to do. I attached a photo of my continuos end result.

And when i export it gets stuck on the last 5 seconds every time. i even force closed quick time and relaunched it an luckily the temporary video was still there. but won't save regardless. i have searched the forums and can't find a fix. is it safe to restart my iMac and try again? or will i lose the video if i go that far... attached another picture of my additional outcome.

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Capture Error- Operation could not be completed as there is no video.

Hi. I'm using Final Cut Express HD 3.5.1 and I seem to have a problem importing video. I successfully imported one DV tape (out of several for a film project I'm working on) using the DV-NTSC Easy Setup.
I use a Canon Optura 40 camera connected via a Fire Wire 400 cable. The cord runs straight from the camera (where it has a 4-pin connector) to the computer. As a longtime iMovie user I followed all the proper procedures - the camera is in VTR mode the tape is ready to go.
Now, Device Control says "VTR" OK and the playback controls in the program actually control the tape. Everything seems right so far. But when I click "Capture Now" in FCEHD it says, "This operation could not be completed as there is no video." What's more is that FCE freezes up (processing cursor) until I take the camera out of VTR mode.
Apple reccomends using the Fire Wire Basic Easy Setup. I've tried that. It still doesn't work.
Another curios note - iMovie seems to have the same problem, which I've never encountered until I've tried to use the camera with this computer - I'm running on a recently purchased MacBook Pro (2.33 GHz, 2 GB RAM) off of an external hard drive (G-Drive 7200 RPM 500 GB).
I am stumped.
Can anyone lend a hand?

So, I tried sending the camera into the FireWire 400 Port on the back of my external HD and I still got the same problem in FCE.
Here's what's really interesting - it will import into iMovie with the new setup.
Whenever my camera is in VTR mode and the Capture Screen is even just OPEN in FCE, the computer freezes until I take the camera out of VTR mode.
I'm really stumped. If I would have to install new components inside of my laptop I might just vie for loading the footage into iMovie and transferring it (if there's no loss of quality. Is there?) but I'm still hopeful for a simple solution to getting FCE to recognize the camera.
I can't really load the footage into my Mac's HD because it's not big enough. I have a video project with about 12 DV tapes of footage, and my internal HD definetely couldn't hold that.

FCP 7.0.3 Canon GL2 Operation could not be completed...no video

Having a problem with FCP version 7.0.3, on a MacPro1,1 (2007 2x dual-core Xeon 2.66GHz, 2GB RAM) running Mac OS X 10.6.8 and Canon DM GL2 connected via Firewire.
These used to work together in the past, but not now.
What's changed: ran out of space on original HDD, installed fresh OS X 10.6.8 on larger HDD then used Migration Assistant to migrate user account and settings and applications including FCP7 and rest of the Final Cut Suite 3.0. FC suite then was uninstalled and re-installed. Still have the original HDD and same problem exists on it as well as on the new install. Same problem also exists when switching to a newly created user account that had never used FCP.
Have used the recommended setting of "DV-NTSC Firewire Basic" for this Canon DM GL2 camera (from Final Cut Pro 7.0.3 Supported Cameras web page)
When I select "Log and Capture" from the File menu, the new windows open, the color bars show in the preview area but "preview disabled" shows in a black bar across the color bars. I see [VTR OK] below the buttons that control the tape movement, click the Play button, the LCD screen on the camera starts to show the tape playback for about 5 seconds, the place where the video SHOULD show up just has Final Cut Pro and an Apple logo and "Waiting for Timecode" in the silver area benath the black region, and the spinning beachball is rotating for a few seconds before the error message appears: "This operation could not be completed as there is no video. [OK]".
Several weeks ago, this used to work on the old HDD, but since then the new OS was installed on a larger HDD and this problem has surfaaced. Problem also exists on the OLD HDD at this time as well.
How can this issue best be resolved? Any suggestions will be greatly applreciated

I have three GL-2s and see this issue from time-to-time... the good news is it's probably not your system or the hard drive; I had it on my G5 dualie (Tiger) and I have it on my 8x 3.2GHz Mac Pro (Snow Leopard) and it also occurs when I use a JVC deck, so it's probably not the camera either.
Over time, my work-around has distilled down to repairing permissions (just in case...) and removing and re-plugging the firewire connection. This seems to "jump start" the connection and gets things rolling again. I have no solid technical explanation but it's similar to what we've always done to re-establish a firewire connection if the device has been dismounted. I expect that it's rooted in the hot-pluggable attribute of firewire.
Hope this helps

I need make icloud account but tell me the operation couldn't be completed please iam need to solve this problem necessary, Thank you

i need make icloud account but tell me the operation couldn't be completed please iam need to solve this problem necessary, Thank you

Why don't you use the option "Get a Free Apple ID" to create a new iCloud account with a free @icloud.com email address for all the iCloud service like Mail, Contacts, Calendars, Reminders, Notes Storage & Backup etc.?
This would be the easiest way.

This Operation Could Not Be Completed...No Video

So I'm getting this error message "This Operation Could Not Be Completed...No Video" when trying to Log and Capture some footage from a mini DV tape.
I've tried this on my Macbook Pro, 10.5.8, Final Cut 7
I've tried this on my Powerbook G4, 10.4.11 Final Cut 5
I've tried to capture the footage directly into both machines and via external drives.
My deck is a Sony PD170. After getting this message I tried another tape on both machines. No problem capturing this footage. This tells me it is not a firewire issue.
Is it possible that this is a tape/capture setting I'm missing? I've used every NTSC setting possible.

Not familiar with this camera, but here are a few questions/ideas
When you play the tape in the camera, can you see the tape settings displayed on the camera's lcd? This may be a menu setting or a button push. What exactly are the settings?
Was the tape shot on this camera? Sometimes, there can be compatability problems with material shot on a different camera. I think some cameras will playback dvcam material via the video outs but not via firewire, Could this be the problem. I have some memory that there may be other formats some cameras will playback via video out but not firewire.
Hope this is of some help.

This operation could not be completed as there is no video - capturing PAL

Ok, I tried all the suggestions I've seen here. I have a Sony FX-1000 and I'm trying to capture a PAL mini-DV tape (which is easily read and played on this camcorder) using Final Cut Pro - latest version. The connection is iLink / Firewire 800 and has been used to capture many NTSC videos in the past. I have tried all settings on Final Cut Pro - under Capture Settings - to no avail.
In all cases, "Preview Disabled" is displayed in the color-bar window. However, the playback controls (rewind, play, ff) all work fine using the buttons under the window. The miniDV plays fine on the camcorder - both picture and sound.
After starting the playback, and pressing "Capture Now", I get a solid black window indicating that the capture software is "waiting for timecode", even with the tape obviously playing. After about 2-5 seconds, I receive the error message "This operation could not be completed as there is no video".
I've tried several computers, several cables (both Firewire 400 and 800) - as well as all the PAL settings and FC Pro and FC Express 4.0. So, any suggestions? I could use some help.
Thanks

Solved the problem. I used an old Sony Handycam DCR-HC28 with Firewire connection and used Final Cut Express with the settings: PAL, DV-PAL DV Converter in Easy Setup.
I was NOT able to control the Handycam with this setting but I could start the capture and then press "play" on the Handycam and it captured. Strange way to solve the problem. Hope this helps someone.
BTW - the HDV FX-1000 did not work this way. I guess the cheap camcorder works better at this!
Thanks to all for the help!

TS3297 I purchased an album and some of the songs did not download completely. How can i fix this?

I purchased an album and some of the songs did not download completely. How can I fix this?

I have the EXACT issue as Hatchs88 and the response doesn't help. I found a 3 of 4 missing songs as "song".tmp file in the music directory but I can't do anything here... The iTunes store just says purchased and it doesn't the songs show up in the purchased list either. What's funny is that I was able to download on an iPod touch but I cant get it on my PC...

Videos in shared icloud album don't load - 'The operation could not be completed'

Similar Messages

Maybe you are looking for