Videos Not Appearing in Disk Use Only Mode!

I wanted to watch movies on my 5th generation iPod so I converted the movie file to a MP4 File and pasted it to the drive. It won't show up in the videos on my iPod though! Help!

That won't work. You need to add the video file to your iTunes library and then transfer it, using iTunes to you iPod. The iPod interface does not recognize files you move to your iPod while in disc mode (well, except for notes).
I have simplified a bit.

Similar Messages

  • HT1339 My ipod does not appear in itunes.because only resrtartohet, can ndoenj so switch to restore in DFU mode.or something

    My ipod does not appear in itunes.because only resrtartohet, can ndoenj so switch to restore in DFU mode.or something

    I can't understand your question or problem...
    B-rock

  • XServe: Disks do not appear in disk utility

    Hi,
    I have the following problem with our Xserve (intel) with MacOS Server 10.6.4:
    I have a bunch of firewire 800 external drives witch are daisy chained. They are configured as JBOD and were working just fine.
    But suddenly they disappeared. I looked them up in the disk utility but coudnt find them there any more; but the system profiler still shows them in the FireWire tab.
    This way it started: I cant attach external USB / FW Disks any more; they just do not appear in disk utility.
    With another Mac I could verify that the disks are fine. The problem is with to the Xserve.
    I even tred
    Thanks in advance, Daniel

    Hi Daniel,
    Hope this doesn't sound silly but is the xserve locked or unlocked? If it is locked you need to unlock it for the disks to mount.
    Hope that helps
    Beatle

  • HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

    I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

    Steve!
    There is a lot more "meat" in this .
    I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

  • Encrypted HDD does not appear in Disk Utility or Finder or Terminal

    I recently reformatted a 320 GB external HDD as Encyrpted, Journaled HFS+ using Mountain Lion. For several weeks, it worked flawlessly. I was able to back up financial documents with the security of disk-level encryption. When connected, the drive would mount and prompt for password (as expected).
    Then one day I knocked against my desk while the drive was connected, pulling the FireWire cable out of the external HDD. It lost power and disconnected, causing the error message about disconnecting disks before ejecting them.
    I immediately plugged it in and attempted to find it. Unfortunately, it didn't appear in Finder. It didn't appear in Disk Utility. It didn't appear in /Volumes or on diskutil list. I haven't been able to get it since then.
    I have:
    A) Restarted with HDD attached
    B) Restarted without HDD attached
    C) Connected with a different FireWire cable, then tried connecting with a USB cable
    C) Run "Repair Disk" on my main internal HD while in Recovery Mode, without and then with HDD attached
    D) Tried connecting to other Macs, using combinations of Lion and Mountain Lion, FireWire and USB
    Does anyone have any additional tricks to try? The data is backed up, so it's ok if I lose it. But I would love to unbrick this drive that I purchased before considering it useless.

    Apple Support article:
    USB and FireWire Troubleshooting
    Firewire Device not Working

  • TS1567 iPhone not appearing as disk in Windows Explorer when connected by USB cable

    I've had my Samsung Ultrabook with Windows 8 (NOT Metro) for months, and I've never had a problem when connecting my iPhone to it via the Apple USB cable.  When thus connected, the iPhone has always appeared correctly in Windows Explorer as an available disk, and I'm able to transfer pictures from the iPhone to another disk on my Ultrabook.
    This morning, for some mysterious reason (no new apps on the phone and no new applicationson the Ultrabook; no 'accidental drops'; no new drivers or updates), even when I connect the iPhone to my Ultrabook via its Apple USB cable, it does NOT appear in the Windows Explorer window.  When the USB cable is first connection, the audible tone indicating the connection is heard, and it DOES appear in iTunes.  It simply does not appear in Windows Explorer.
    I have already (a) stopped and restarted the Apple Mobile Device USB Driver, (b) checked for any available driver updates, (c) started, stopped, and restarted iTunes (NOTE:  The iPhone DOES appear in iTunes when it is connected via the USB cable; it simply doesn't appear in Windows Explorer as an available disk); (d) stopped, then started the Service.
    What should I try next?

    I'm no sure this is still the case but it used to be (an older version of iOS and Windows 7) that the iPhone would not appear in Windows Explorer if there were no pictures in the Camera Roll (I think the logic being that the only thing you can do with the iPhone/Windows Explorer combination is import photos from the Camera Roll). If your Camera Roll is empty, try taking one picture and see if it then appears. I suspect this isn't your problem since the probable reason you are even trying to connect the two is to import photos -- but just in case.

  • YouTube videos not appearing on Apple TV

    Reaching for straws here:
    Using my Mac and the Safari browser, I signed onto YouTube and created a Lana Del Rey playlist containing 10 videos.  When I play this playlist on my Mac, all 10 videos appear and play.
    When I click on the YouTube app on Apple TV and sign into my YouTube account, I can see my Lana Del Rey playlist.  But it only contains 4 of the 10 videos.  I've been trying to figure out why the other 6 videos do not appear.  Is it possible that YouTube allows certain videos to be played on a desktop computer, but not on Apple TV?
    All my Mac and Apple TV software is up to date.  Thx

    Not all videos are available outside of the website, no matter the platform. It could be due to copyright, or the user's decision.

  • Iomega external hard drive not appearing in Disk Utility

    I have a MacBook Pro (from 2011) and I'm running OS X 10.9.5. I have an old Iomega external hard drive. I'm not certain but this thing might be about 3-4 years old? When I connect the drive to my MBP, it shows up in Finder under Devices. But what appears is the Windows disk utility that is pre-loaded on the drive. The actual drive does not appear and I can't move files onto it in Finder.
    When I go into Disk Utility and try to format the drive for Mac use, it doesn't appear.
    Is there anything I can do or am I stuck with this old drive that doesn't work with Macs?

    Try following tips.
    USB and FireWire Quick Assist - Apple Support

  • Added a 2nd Array on my Xserve RAID, Though it's not appearing in disk utilityt

    I have an Xserve RAID unit. Up until now I have just been running 1 side of it with 7 drives on RAID 5 = about 4TB. I recently picked up another identical RAID unit with 7 drives to fill out the right hand bay of the unit doubling our capacity. I have installed these and initialised the array which took about 48 hours, it's now showing as online and green lights all the way.
    Now I've gone to make use of the extra space but it is not showing as available in the mounted RAID icon on the desktop, nor will the new array appear in disk utility. When I access server admin however, on the overview screen it shows I have 8TB on offer. Contrary to this in the system profiler the 'Fibre Channel Domain 2' is not reporting any SCSI devices unlike 'Fibre Channel Domain 0' - Not sure this is related.
    If anyone can help me gain access to the new found 4TB I would be greatly appreciative.

    it is not showing as available in the mounted RAID icon on the desktop
    It won't.
    The XServe RAID is really built as two independent RAID controllers and drive sets in one enclosure.
    The 7 left-most drives are connected to the top controller, and the 7 right-most drives are connected to the bottom controller. They are independent. There's no way to build a single 14-drive array - the best you can do is build two 7-drive arrays.
    What you should find is that if you connect the bottom controller to your server, the second array should appear on the desktop, separate and distinct from your existing volume.
    If you really need to expand your volume to cover all 14 drives then you'll need to use software RAID 0 (striping) on the server to meld both of the 7-drive arrays into a single logical volume.

  • Urgent: Custom font style not appearing in PDF output only

    Hi,
    For a customer, I received customer specific font styles(ttf font files) which I installed on my machine and then copied those files in Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts as well as in JRE/lib/fonts. Then I created a template in word and font there appears as custom font.
    Now I am getting that font style in all output formats(rtf,ppt,excel) except the PDF output. I am using Oracle BI Publisher desktop alone. Not sure what I missed because of which text font is not changing in PDF version only. I checked the PDF properties and there also custom font is not getting mapped.
    Thanks in advance.

    Here is the link that describes how to set up the font mapping for PDF output: Look for "Font Mappings (for PDF output)"
    BI Publisher Demo Library</title><meta name="Title" content="BI Publisher Demo Library">…http://www.oracle.com/technetwork/middleware/bi-publisher/learnmore/demo-library-toc-173301.html
    Thanks,
    Bipuser

  • Movies and videos not appearing on iPhone.

    I have an odd problem with movies (both those made by me and those purchased via iTunes) not appearing on my iPhone 3GS after syncing, even though they used to.
    All of the options in iTunes are set correctly for syncing.
    The strange thing is this: I can see the videos being transferred in the sync status bar in iTunes, but when I go into the iPod part of my iPhone and select Videos they are not there.
    Also, if I delete the movies from iTunes, and then sync, the movies are actually copied back from the iPhone to my mac, even though they were not showing up on the phone.
    Anyone have any ideas? I have selected and deselected every option I can think of and synced over and over again, but it makes no difference.
    Regards,
    Andy

    Guys, I have finally solved my problem, and I hope this helps you too.
    In the end my issue with the non-syncing of videos turned out to be due to the Restrictions settings. I had been experimenting with enabling the restrictions for various sorts of content so that my young daughters did not end up seeing, hearing or buying something that they ought not. This then stopped a number of videos from being seen on my iPhone, even though they were there.
    So, if you have set any sort of restriction on your phone, check your settings : General > Restrictions > Allowed Content. It may be that this sorts out your some of your problems.
    As a side issue, I am a a bit annoyed about this problem. Yes, I played around with the content restrictions, and then forgot about it, but maybe somehow, somewhere during or after a sync a message ought to pop up saying "You have enabled some content restrictions. Some of your audio or video content may not be available on this device"?
    Anyway, hope this helps you all.
    Message was edited by: Andy Barnes

  • Video not appearing in Analytics

    We are using Enterprise for a new client and we have embedded a video in some folios (and hope to have multiple videos in folios in the future).
    However it does not appear in the Analytics under the Video content. Articles and ads appear perfectly. I assume we have to give it a title - but where do we set this?

    Thanks Himanshu,
    We are in the middle of a launch so we don't want complication of a new app build at the moment.
    Thanks for the explanation. It would be good if known issues with versions could be listed somewhere so we could check there first.
    Thanks
    Graham

  • Videos not appearing in TV Shows in iPod...

    When I add a video to iTunes and set it so it goes in the TV Shows section all works well.
    However, when i drag it onto my iPod, it will not appear in TV Shows, infact, the TV Shows dosen't even say there's no videos there, but it just won't let me in to see it. When I put that same video in the 'Movies' section, it can play fine.
    Why is this?

    I had the same problem, but after I changed them to Movies and then back to TV shows it worked. Unfortunately, I had to do this manually with 12 episodes, but it may be worth downloading one of the many Apple scripts to do multiple shows.

  • TS3719 Video not appearing in iMovie video

    I have lot of video files on my iPad 4 video but they are not appearing through iMovie software.

    iMovie can see video from the photos app.
    It does not see or able to edit video from the movies app.
    So are you saying that you can see the video in the photos app, but iMovie does not see them?

  • Video not appearing with newest version

    I am not getting any video playback in the program or source monitor. I just loaded Premiere CC2014. The scopes show video, the timeline plays, with audio, but no video. I can change it to alpha and see that, but it won't switched back to composite video. Visually... I can select it, but it doesn't change.
    OS 10.8.5
    2 x 2.4 GHz 6 core
    24 GB RAM

    Hi xmanpost,
    Which GPU is installed? Go to File > Project Settings > General and change the video renderer to GPU Acceleration software only and see if that helps.
    Thanks,
    Rameez

Maybe you are looking for