Videos now single frame with audio only

My 30g video Ipod's videos now show up under music. When I try to watch them they are just a single frame and I get the audio. The videos are fine when viewed with Itunes. How do I get my videos back to normal videos???

correction: it works fine on my ipod when I have the "TV out" setting set to "off", but I'm only getting audio on my TV when I have the setting "TV out" set to "on." It has worked fine in the past.

Similar Messages

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Final Cut Pro X 10.0.5 Create Storyline with Audio-Only Clips in order to add crossfade transition.

Final Cut Pro X version 10.0.5 – How to Create Storyline with audio-only clips. I'm following exercises in Diana Weynand's Pro Training Series, and this function is greyed out. Trying to create crossfade transition. New Compound Clip can be activated however.

Chapter 7. Page 269. Exploring Audio Transitions. Selecting two audio clips, then control-clicking the clips. The dropdown menu to Create Storyline or (Command G) is greyed out. The function no longer seems to be available. I've found other functions that no longer apply with the latest version in relation to the book, and I assume that this is another one. But I'm trying to follow the book the best I can. I know there's a workaround. I can simply select an edit point and add the cross dissolve (Command T), but I wonder if this accomplishes the requested exercise from the book.

How do I show still photos with audio-only portion of video?

My raw video is an interview with a talking head. I want the audio portion of the video to continue (with video portion not visible) while I show photos relating to what the head is talking about. How do I do this?

Drag the photo onto the frame where you want it to start.
[See Karsten Schluter's blog for a bug I found and how I got around it.|http://sites.google.com/site/karstenschluter/im08tricks] Scroll down to "the many photos over a clip bug"
Another way:
If you want all slides and no video, you can drag just the audio track into your project by selecting it in the Event and holding down Command and Shift while you drag it into the project.
[Here is a blog entry describing this|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]
Finally, you could upgrade to iMovie 09 where this is all much easier.

Video not in sync with audio or vice-versa

This is a last ditch effort to try to find some definitive help. Everyone has a sad story when things go awry with video capture. Here's mine: I recommended the Apple platform and iMovie for my wife for documenting a how-to for a particular hair style transition. Something she can't recapture. We used a MacBook Pro's built-in camera. All went well until she noticed from the beginning of the daily captures that the audio and video would fall out of sync within clips shortly after she started. After she was done and mentioned it, I discovered that the six or so clips that make up the project varied in their frame rates (project is set to 30). One clip with a frame rate of 28 is fine, but the rest have slower frame rates. The total project length is approximately 15-20 min....
Detaching the audio from the video and exporting to QuickTime (as suggested by most) makes no difference. I've also seen suggestions about moving the content to MPEG Steamclip and doing "something" with it but I'm not video editing savvy so exactly "what" nyone is supposed to do via that solution is an unknown..
I've been all ofver the web searching for a way to change all of the clip's frame rates to 30 fps since the one clip at 28 frames is acceptable. A foregone conclusion. However, I can't seem to find a way to do this anywhere.
Would really like to rescue the two weeks worth of work my wife put into this effort.
Any/all help appreciated thanks.

The basic problem you are facing is the use of the internal camera. It is designed for simple web cam usage rather than movie making. If you are making a Face Time call, the variable frame rate helps you, because when there is not a lot of movement, it will slow down the frames and give you better performance at a lower bandwidth. If the audio is a little off you do not care.
Long term, you can solve this by using a camcorder that shoots at a constant framerate.
For your immediate problem, I think that the suggestion to use MPEG Streamclip was a good one.
Basically, you would be dragging in this file with the variable frame rate and using MPEG Streamclip to save it out as a file with a constant framerate. You should now have a file at 30 fps with audio to match, within reason.
Try dragging your clip into MPEG Streamclip. Click the PLAY button so you can see that it plays. Then FILE/EXPORT TO QUICKTIME. For Compression, choose Apple Intermediate Codec. Leave the sound setting as Uncompressed. In the Frame Rate box, type 30. Click the check box for Frame Blending. Deselect the box that says Interlaced Scaling.
Finally, click the MAKE MOVIE button, and give at a name. Save it to a location where you can find it. You can then import this into iMovie if you want, but using FILE/IMPORT MOVIE in iMovie.

MP4 VIDEOS OPENS IN QUICKTIME WITH AUDIO BUT NO VIDEO?

I have downloaded may video clips from youtube with tubesock and they worked fine in quicktime pro and I was able to place them on Iweb, now they only play audio no video. What do you think happened.
I can play them with my VLC player and they are fine.
PLEASE HELP
Michael

Tubesock had a bug in their software which was allowing it to create invalid MPEG-4 files. The latest version of QuickTime will no longer play these invalid files, so if you just recently upgraded, that's your problem.
The fix is easy, though. The developers of iSquint have released a Debreaker application that you get for free with the download of the free iSqint (it's all free is what I'm saying Download that app and use the Debreaker to fix your files, and you should be set.
http://www.isquint.org/getit.php
Message was edited by: Kyn Drake

Videos become single frame when exporting iPhoto album

I've gotten the hang of how to organize pix and vids in an "album" and get them renamed. Now I just want to give those renamed reordered photos on discs to other people that will be on Mac and PCs. This apparently means using the "export" feature, as burning an album directly from iPhoto won't produce a disc usable by a PC.
"Exporting" the album succeeded in making a new folder elsewhere on my computer containing all of the images and it preserved their names. However, I noticed all of the Quicktime and AVI files had very small file sizes. When I double click on a .mov file, for example, it opens in Quicktime but it is now only a single frame. Same is true for the avi files.
Any suggestions on another export setting tweak I need to do to get this right?

You shouldn't have to change it to original though. And if it isn't exporting the actual movie, it should show up as a pic, not have the video icon. I lost important footage from hurricane Ike because I was in a hurry, and trusted the app. Then I go to look at the videos in iMovie, and they aren't even recognized. Current should be whatever it is. Currently that was a video, not an image. Sad.

Loop movie on a single frame with AS2?

Hi, i'm animating a web banner, which is supposed to loop infinite times. The thing is, i learnt to use tweening prototype for my animation, so the entire code is written on a single frame.
Is there a way to loop the entire movie at the end?

Thanks! but I still need help.
Ok, let's say this is the code:
function iniciar (){
//INTRO//
_root.fondo._x=2632;
_root.fondo._y=223;
_root.fondo.tween("_x",-38,25,"easeOutCubic",0.5)
_root.bloqueintro._x=535
_root.bloqueintro._y=226
_root.bloqueintro.tween("_x",-600,1.5,"easeOutCubic",6.5)
_root.opt._x=468
_root.opt._y=-50
_root.opt.tween("_y",146,1.5,"easeOutCubic",1.5)
_root.opt.tween("_x",-270,1.5,"easeOutCubic",6.5)
_root.esp._x=530
_root.esp._y=198
_root.esp._yscale=0
_root.esp.tween("_yscale",100,1,"easeOutBounce",2.5)
_root.esp.tween("_x",-459,1.5,"easeOutCubic",6.5)
_root.de._x=621
_root.de._y=246
_root.de._yscale=0
_root.de.tween("_yscale",100,1,"easeOutBounce",2.5)
_root.de.tween("_x",-368,1.5,"easeOutCubic",6.5)
_root.trab._x=664
_root.trab._y=292
_root.trab._yscale=0
_root.trab.tween("_yscale",100,1,"easeOutBounce",2.5)
_root.trab.tween("_x",-325,1.5,"easeOutCubic",6.5)
//CONECTOR//
_root.conector._x=1659;
_root.conector._y = 244;
_root.conector.tween("_x",-800,1.5,"easeOutCubic",6.5);
_root.conector2._x=-800;
_root.conector2._y = 244;
_root.conector2.tween("_x",1924,1.5,"easeOutCubic",13);
_root.conector3._x=1924;
_root.conector3._y = 244;
_root.conector3.tween("_x",-800,1.5,"easeOutCubic",21);
_root.conector4._x=-800;
_root.conector4._y = 244;
_root.conector4.tween("_x",1924,1.5,"easeOutCubic",27);
iniciar();
So the whole animation is now into a function body. Still, how can i loop that function, if i only have one frame?

Mute single frame of audio

Hi all,
I'm a novice Flash user so bare with me, i'm trying to mute a single layer of Audio when a button is clicked.
The idea being that some of the audio will continue to play throughout the Animation but when the button is clicked the main audio (backing music) will be muted/disabled.
So does anyone know some script to Disable a specific layer or mute a layers sound?
I'm working in a AIR for IOS document, using ActionScript 3 in Flash Pro CC.
Any help is much appreciated.
Thank you.

you cannot differentially control the sound on one layer vs the sound on another layer. you could control the sounds in different movieclips, but it's easier to use the sound class to control your sounds and attach no sounds to timelines..

Single Frame with Back and Next Jbutton support for Swing

Hi All,
I need a help regarding to th JFrame.
I have to design a tool with Back and next button with a single frame. With Next button action i should move to a new Frame content and with Back button i should back to the previous one.
How should i proceed?
Thanks a lot in advance.

1) That's a Swing question. There a {forum:id=950} forum.
2) This is a very common need. There is no built-in widget in the JDK, and a lot of custom approaches, including in libraries. Google for "Java Swing wizard"
3) If you roll your own, the simplest way, as far as the GUI layer goes, is to stuff your panels in a CardLayout, and have your buttons switch the current "card". Very simple: http://download.oracle.com/javase/tutorial/uiswing/layout/card.html
4) The trick may be in keeping the "business logic" in sync (if for example panel 2 depends on processing info from panel 1). If you're new to java and Swing, make sure you understand objects and references

IChat video not in sync with audio

Hi Everyone,
For the past six months I have been trying to resolve issues with the video chat. It all started with me updating my brother-in-law's iMac G5 from Tiger to Leopard. Before the update we were able to video chat with no problems. Since the update the video has been out of sync with the audio. We tried all the remedies that have been posted (setting Quicktime Streaming to 1.5Mbps, limiting iChat bandwith to 500kbps, deleting the plist files in the preference folder) with no luck.
In the interim we have been using Skype to do our video chats, and that has been working just fine. However it has been bugging me that we can use iChat. We were hoping that the recent updates from Apple (10.5.5 and the Quicktime patch update) would have fixed the issue.
Now with all the updates we are partially fixed. The video feed that I get now is fine and looks like it is in sync with the audio. However, my brother-in-law sees me out of sync with the audio (the video is at least 10 sec behind the audio, and gets worse the longer we are connected)
We have tried all that we could think of including using the MobleMe and the .Mac accounts to log in but so far no luck. I'm wondering at this point if it is his modem (about 3 year old) that is causing him to get a delay? We tried connecting the modem directly to the iMac without the router, but it made no difference for the video sync issue.
The other issue we have been dealing with is his Linksys router (don't remember the model but, it's the one without the wireless capability) causing screen sharing not to work. He has tried disabling the firewall on the router but that has not worked. It will only work if we pull the router off and connect directly
Any help is appreciated, thanks in advance

Some modem features such as a SPI filter which checks the Incoming data stream for any app has the potential to get in the way.
It is not uncommon for the amount of data to arrive faster than the SPI part can deal with it.
If his router has an SPI filter/firewall then he should turn it off.
It may pay to Power down all items such as the routers and computer and potentially the modem and restart them all.
Also try Restarting his Mac with holding down AppleALT+PR until he hears three Start Up Bongs.
If this does not work get him to access the Linksys and on the front "Set Up" screen he will have an MTU settings. Get his to set this at 1492 (the default is 1500 and should be reduced by 8 each time if changed - it changes the packet size and may help).
9:48 PM Wednesday; December 3, 2008

Video not playing in quicktime (audio only). WHY?

I'm running on Mac OS X 10.6.8 - Quicktime version 10.
Here's the info on the files that won't play:
Codecs: MPEG-2 Video, Linear PCM, Timecode
Color profile: HD (1-1-1)
Original Format: MPEG HD
I've downloaded the MPEG-2 codec for quicktime, as well as every XDCAM codec I could find. The video still won't play in quicktime (it shows up in VLC only).
I need to import these clips into Final Cut Pro desperately.
Any suggestions?

Is this easy/quick to do? Did you do this in compressor?
The process is easy but repetitive. (Actually there are a number of different work flows that could be used here but all start with a platform that will play the original file.) In this case, I simply used QT 7 Pro for the conversion.
I WILL have to keep the 8 audio tracks for editing purposes. Will this mess things up?
It could. Converting the eight spearate tracks to a single audio track with 8 channels does seem to subdue the audio levels whereas downconverting to 2-channels doesn't. You probably have two major options here. You can create a copy of each file (Command-D), convert the video track only, and then replace the original video track with the newly converted video track in the copied file. This keeps both audio and associated video together in a single file. However, since you plan to edit the files anyway, you could simply creater the duplicatle original file, export the video to a separate video only file, and then delete the video track in the copied file. This leaves you with an audio file and a separate video file which can be mixed back together in the video editor.
However, most of this is beside the point if the file can be opened, played, and/or imported directly to FCP on a single system. As previously indicated, I am running a system with the older version of FCP installed and have no problem importing XDCAM file directly to FCP once the editing project environment is switched to XDCAM editing. Basically, I am a bit afraid to update to the latest version of FCP until I've learned more about it.

Captured video not in sync with audio

I capture video and audio from a Sony Beta SX A-75 using the SDI output through Blackmajc card into dual 2.5. We are using DV compression. The audio is out of sync after capture. It is 3 frames off. If I slide the video 3 frames to the right on the timeline , then it looks ok.
Capture/Input Blackmagic NTSC-DV
Device Control Blackmajic NTSC 29.97 Hz
Anyone know what's going on?
2.5 dual Mac OS X (10.3.9)

Either the sample rate of the audio is off, or, as I suspect, some decks/cameras have to be given an off-set in FCP. Don't remember off hand where that setting is. You may want to check with Blackmagic (Decklink) support about it.

Quicktime player with audio only?

I have two problems:
First, I use Coursecompass an educational tool which use Quicktime to access it's multimedia. However, when I try to access it, all I get is audio but not any video.
Second, I also ordered the Pro version figuring it would be the solution, but the instructions to activate it sent me to my control panel to access Quicktime. However, even though I have the player on my computer, there is no box for it in my control panel. Does anyone have an idea of what's wrong?

I also ordered the Pro version figuring it would be the solution
Actually no, that won't help. The Pro key only unlocks the editing and export/conversion capabilities of QuickTime Player. Pro doesn't add anything to the ability of the free version to play a file.
but the instructions to activate it sent me to my control panel to access Quicktime. However, even though I have the player on my computer.
If you have Vista on your computer, launch QuickTime Player and go to the Register menu command under Edit -> Preferences.
But as I said, a Pro registration won't add any playback capabilities. Have you contacted Pearson about the problem? If not, you might start with this support article on their site.
Regards.

IPod Video out of sync with audio.

Hey guys.
I recently purchased a video ipod and was looking for ways to convert my videos & DVD's to work on my ipod.
So far I've done
cucusoft
psp9
videora
pqdvd
pocketdvix
quicktime (freezes up on my pc, and takes ages to convert)
and i've yet to find any way of stopping the audio and video from being out of sync (by anything from half a second to about 7 seconds) with one an other...
is there a program or technique I could use that will enable me to watch video that is in sync with the audio?
on a footnote, the quicktime does work but regulalarly shuts down on my computer and takes WAY too long to convert.
Please help me out here guys as I am reaching the end of my tether.
Thanks.
/\Ben/\

hi -- i've tried nearly all the programs you have, and have finally gotten the pq dvd to ipod video converter to work out of all of them. btw, the xilisoft one does NOT work, and i'm trying to get my money back from them, so buyer beware!
anyway, i found the issue to be the frame rate -- on movies, i was able to use 30fps successfully (worked for star wars, for example), but on native tv show dvd's (such as sex and the city) i had to use 24fps.
see if that works for you.

Videos now single frame with audio only

Similar Messages

Maybe you are looking for