Videos on a DVD, possible ?

I want to put some of my videos in my ipod touch 5 on a dvd someone can help me ?

Are these Videos you purchased from the iTunes Store?

Similar Messages

Is it possible to export a video clip from DVD player to iMovie '09?

If I load a homemade DVD onto my iMac using Disk Utility and then import either the entire disc or portions of the disc into iMovie, that works just fine. However I noticed that some clips are missing in iMovie, even though they are on the iMac in form of a .dmg file on the desktop. The same file that was used to import in to iMovie. If I look at this file using DVD player, everything is there, but some of these clips are missing in the event window. So I created a video clip in DVD player of those pieces missing in iMovie and now how can I get these into iMovie?

Hey, best way to import video from a DVD video disc for editing is to acctually have a simple video file. Use Handbrake or MPEG StreamClip to read the disc and create a video file off the video stream.
You could also set in and out points anc manually create several clips, which may help with playback and rendering for editing. I don't know how extensive you're going to get in your editing with iMovie...
Hope that helped.

I have just had all my video converted to DVDs and now I would like to edit them...how do I import them into imovie?

Can somebody help me figure out how to import my home videos from a DVD into imovie?

That means 'reverse engineering them'!
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

What is the best video converter for DVD to iMovie? Either free or to purchase.

What is the best video converter for DVD to iMovie? Either free or to purchase. And one that is 'fool-proof' and very easy to use. Many thanks, anyone who can advise.

You want to 'reverse engineer' the compressed mpeg2 DVD file back to something iMovie can use?
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How can I extract a piece of video from a DVD ?

Dear all,
I recorded a DVD of a TV broadcast. I'd like to get an extract from it and use it in a presentation later (such as powerpoint).
How can I extract the piece of video ?
Is is possible to record it with quicktime (for example) or any other application ?
thanks for your help
Didier

MPEG Streamclip and the Apple MPEG-2 component will allow you to edit the VOB files off the DVD and export to MPEG-4. Searching here will provide this answer several hundred times as it is asked a LOT. More so for iPod users. You cannot export or edit and then export MPEG1/2 with Quicktime unless you do not need the audio as there won't be any.

Will PE7 burn a long video to multiple DVDs?

I've been working on a project that uses footage from 15 scientific conference presentations, each one lasting about an hour. The conference spanned two days, and I have two sets of footage plus literally thousands of PowerPoint slides to incorporate. I need to have scene markers set up, so the viewer will have a menu from which to select whether to "view all" or skip to a particular scene (speaker). All that is manageable.
While I know that PE7 has the "adjust quality to fit media" option when burning the video to disk, what I'd really like to do is have PE render the files with the highest quality, even if it means that the resulting video will span a number of disks. Otherwise, my DVDs will each contain at least three hours of lower quality video. I know my client will be unhappy with this.
I am separating the entire project into two sections - day one and day two.
My question is, with day one being about six hours of video, is there a way to set up the burn so that it will maintain a higher quality video? While PE can fit several hours of video on one DVD (?), it sacrifices quality to do so. I want the highest quality video possible. Incidentally, what is a reasonable length to fit on one DVD?
Do I need to break the project up into many sub-projects, or can I make the entire first day's video one project and have PE automatically break the burn into several DVDs, including scene markers?
A second question has to do with scene markers. Once I have the entire first days video set up, including scene makers, should I decide to break the project up into two or three sub-projects, is there a way to delete footage including the scene markers? Obviously I can take all the footage AFTER a certain point and delete it and then render that part to disk, but is there a way to delete the footage BEFORE a certain point, including deleting the scene markers? When I tried to do this, the scene markers remained exactly where they were - they were not tied to the actual video.
Thanks!
Jim

Jim,
PrE has no way to "span" multiple DVD-Videos. It also balks at really long Timelines. My advice would be to assemble your footage into Projects, each one for one disc, so you can keep the quality high.
If you already have everything in one Timeline, I'd then trim each to equal one disc, do a Save_As (Conference_Disk_01, _02, etc.) for each trimmed Project. Do the navigation for each disc, and then burn. Personally, I'd include Titles at the beginning and the end, to alert the user that they have, say Disc 1 of 6, and also "Insert Disc 2 now." That sort of thing.
PrPro has a few more capabilities, such as separate Sequences (think mini-Projects inside of a master Project), but I do the multiple disc sets the same way. Each Sequence (or groups of Sequences) is a separate disc, and is Exported for Import into Encore (my authoring program) and each disc is burned at the highest quality that will fit. Just finished a 17 disc Project, and it was handled the same way. Each Sequence was titled with the disc # and the placement on that disc, so I knew what went where. Had about 80 separate Sequences, but it was easy to know which ones went into which DVD/Encore Project. I also had the Disc X of Y on both the front of each disc, plus on the case for it. That way, the user knew where they were in the order, and could get the disc back in that order. You can do the same thing in PrE, but will be using Projects for each disc. A bit of planning will go a very long way in the production.
Good luck, and let us know if you have any more questions. BTW - for acceptable quality, I'd set a limit of 2 hours for any duration, with maybe 150 mins. as the absolute max. I've "stuffed" 3 hours on a DVD-5, but it is NOT a pretty sight. Can you go with DVD-9's?
Hunt

Video length on DVD

Is it possible to fit 240 mins of video onto a DVD either single or dual layer?
Also I need to have menus and music on the DVD.
Any ideas?

Probably not. You're right at the limit on a dual layer disc even using the heaviest compression, which will definitely look inferior. With menus and any additional elements not in the movie you'll probably be over the top. A four hour long movie is really long, longer than most people are comfortable watching in a single sitting.

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

Video converter from dvd to ipod

can someone please tell me a free video converter to convert videos from a dvd to my ipod and tunes

Thank you for your posting, which is very helpful, however it will be better if you can post on the Video forum as well
http://discussions.apple.com/forum.jspa?forumID=807
By the way, I must say that it is a very good post

Windows Media Player Doesn't play video files or DVDs (Windows 7 Home Premium)

Hello,
I recently purchased a new hard drive and installed Windows 7 Home Premium on it. Since then, Windows Media Player has not been able to play any kind of video files or DVDs. I have tried using the Fixit tool and turning the WMP off and on with the Windows
Features menu, but it has not solved the problem. I have also made sure that my video and audio drivers are up to date.
The errors that come up say:
Windows Media Player cannot play the file. The Player might not support the file type or a required codec might not be installed on your computer.
and
Windows Media Player cannot play DVD video. You might need to adjust your Windows display settings. Open display settings in Control Panel, and then try lowering your screen resolution and color quality settings.
Any help with this would be great, because I like using WMP better than other media players.

Hi,
Firstly, please try to use the Video example in C:\Users\Public\Videos\Sample Videos if it could play normally.
Secondly, try to reinstall Graphic Card driver for test.
If problem persists, try to remove WMP in Windows feature and add it again for test.
Roger Lu
TechNet Community Support

HT1454 Can't see ipod videos from 60GB ipod classic. I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play

Can't see ipod videos from 60GB ipod classic. I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play or do I need to get new ipod. It works on my iPad and iPhone, but not through iPod Classic.

Are these music videos located under Videos on your iPod? Do it play other regular movies (if you have any on the device)?
B-rock

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

How do I import video off a DVD?

Is there a way to import video from a DVD directly into Final Cut Pro Express or do I need to download another program in order to do so. The DVDs are no copyrighted they are actually DVD I burned myself. If I do need to download another program which is the best/safest?

MPEG Streamclip (free) coupled with the Apple QuickTime MPEG2 Playback Component ($19, downloadable from Apple, if you don't already have it).
If the DVD is standard def, use MPEG Streamclip to convert it to *QuickTime > Apple DV/DVCPRO NTSC.* If hidef/widescreen, convert it to QuickTime > Apple Intermediate Codec.

SONY Digital Video Camera DCR-DVD 201 and iMovie

I have a sony Digital Video Camera
Posted: Aug 6, 2006 6:59 PM in response to: max Farina
Reply Email
Can I use this Digital camera with my MacBook Pro
it is a SONY DCR-DVD 201
I do not see a firewire port on the camera ONLY a USB.
How can I get my video from my DVD to iMovie?
I want to put my home video from this camera to iMovie, Can it be done?
I am going nuts, I paid alot of money for this camera and now I can't use it in my new Mac?
I am very new to Mac and this hurts!
PLEASE someone help me, I only see a USB, DO they sell some thing to help get the Video into iMOVIE?
Thanks......

Search this forum for "compatible, DVD camcorder" and you will find many threads where people lament this truth:
iMovie is for miniDV formatted video connected via Firewire.
Mini DVD camcorders are designed for you to do very light editing on the camera before you finalize the DVD and don't support being imported into a computer. Anyway, many of the experts here know of converters and workarounds, if you want to spend some more money. You could start with these threads:
http://discussions.apple.com/thread.jspa?messageID=2404104&#2404104
http://discussions.apple.com/thread.jspa?messageID=2288697&#2288697
http://discussions.apple.com/thread.jspa?messageID=2243781&#2243781
Somewhere I have read a pretty detailed thread describing what converter you need and how to do it. So just keep searching...

Videos on a DVD, possible ?

Similar Messages

Maybe you are looking for