Videos only work if protected mode is disabled. I'd like videos to work with protected mode on?

''edit: locking this question as duplicate, continue here: [https://support.mozilla.org/en-US/questions/1013134 /questions/1013134]''
OS = Windows 7
Flash = 12.0.0.77
Firefox = 29.0.1

Unfortunately upgrading to the latest version did not make a difference. Any other suggestions?

Similar Messages

HT201401 4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out l

4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Video chat only works with a few people

it only works with like two of my friends but there able to do it with people i cant

Hi B.F,
The answers to the other question we asked in your other thread will be needed first
http://discussions.apple.com/thread.jspa?threadID=871534&tstart=0
1:25 PM Thursday; March 22, 2007

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

My iPhone 5c sound/speaker only works with the headphones in and when I'm trying to change a ringtone in settings..

my iPhone 5c sound/speaker only works with the headphones in and when I'm trying to change a ringtone in settings.. why is this?! its not on airplane mode, its not on silent, ive tried turning it on and off, software is up-to-date etc. just no sound for text alerts or when trying to play music/videos. Help!

same issue as this guy it's a hardware issue
https://discussions.apple.com/thread/6266690?tstart=0

Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud password

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
You will need to the Lightning to VGA adapter directly
http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
Or the Lightning Digital AV Adapter
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
If the projector supports HDMI input.

External monitor only works with clam shell open

external monitor only works with clam shell open

Are you using the method in this Apple article? If you do, it should work.
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display

Does airplay mirror only work with the ipad2 and not ipad1

does airplay mirror only work with the ipad2 and not ipad1

But can it still stream video wirelessly?
For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
I'd like a wireless option.

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

My Telus wireless only works with WEP, but if I switch to WEP the wireless goes down on the other Windows computer being used in the same house. Is there a way for both of us to get wireless internet or do one of us have to be connected by the ethernet?

My Telus wireless only works with WEP, but if I switch to WEP, the wireless on the other computers in the house (which is Windows and WPA) stops working. My computer works with the ethernet cord but I want to be wireless too! Do one of us have to sacrifice our wireless?

For assistance in getting your MacBook to connect to a WEP-protected wireless network, please check out this Apple Support article: AirPort: Joining an encrypted WEP or WPA Wi-Fi network

MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
There is a red light constantly emitting from the headphone socket?
I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
Please help!
Julian

Hi Kitty.
Seems to be quite a popular problem. In another post, I posted the following.
"The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
That seemed to solve the problem for that user.
The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
Good luck

Does DualCoreCenter ONLY work with the MSI VGA Drivers?

I have the RX3870-T2D512E-OC Video Card using the latest Catalyst 8.5 drivers but DualCoreCenter does not see the video card at all. If this product only works with MSI drivers than it's total and utter crap for Video since the drivers are so far out of date for ATI that it is not funny by MSI. It detects the new K9A2 CF-F V2 mainboard just fine but not my video card.

So use the ATI drivers, then you have all the options except the MSI extra's.
MSI can't release drivers without testing, so it takes a bit of time.
BTW, GPU Scaling was already in Catalist 8.30, MSI has 8.45 online, ATI is at 8.50
I wouldn't consider that far behind.
BTW, why do you consider a bit older driver useless? Any reason why you must have the latest driver?
Only a few games require to have the latest drivers at all.
I myself never use the latest ATI drivers, I prefer the better tested MSI version, even when it's a few months behind.
And I have never seen a game that had problems with it.

I bought this iPhone from Apple Retail Store for the full amount, but it does not work with my SIM card only works with AT&T

Hello,
I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
Thanks,
Best Wishes

When did you buy it?
Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason. Return it and get your money back, then use that to purchase an unlocked phone.

Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file. Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing even though I have the auto sync feature turned off.
This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer. Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar. Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
Then if I try and play the music I just transfered, the iPod says there is no music loaded.
Ideas?

Videos only work if protected mode is disabled. I'd like videos to work with protected mode on?

Similar Messages

Maybe you are looking for