Videos skipping and stopping.

Several videos, all correct format, will play for a certain amount of time, pause, and then, several seconds later, will begin to play only audio, skipped forward the amount of time the video was paused. Then again, several seconds later, the video will kick in.
Also, several different videos will pause randomly, then I will hit play, and it will begin to play with NO audio. Why is this?

what format do you have the files in?
Did you convert them with anything?
-Bense

Similar Messages

  • Why do online videos start and stop and what to do about it

    why do online videos start and stop and what to do about it

    It usually means a slow internet connection, or inadequate hardware or both.
    It is not a 10.6 problem as such as 10.6 handles video streaming quite well.
    In your post this tag seems incongruous in this 10.6 category. 

  • WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    I am experiencing the same problem, not being able to access internet at the same time as streaming iTunes music through an Airport Express.
    Our configuration consists ot; an iMac G5 and an AirPort Express connected to a cable modem.
    This problem first occurred using iTunes 7.0, now updated to iTunes 7.0.1, along with OS X 10.4.8
    I have followed the Apple troubleshooting guide - without success to this point. The internet can be accessed (although slower than usual). However when the AX is set, using the AirPort Admin Utility to provide an AX provided IP address to the computer, the internet disappears, but iTunes can play over the network via the AX station.
    I am suspecting a damaged preference file, or something of that nature, but am not sure what file(s) to be searching for.
    Any help here would be appreciated.
    thanx

  • Quicktime video skips and freezes after exporting from FCP

    I have tried exporting from Final Cut a few different ways, but my QT file had short skips and freezes in the video (the audio is perfect).
    I have done this same thing several time with no problems at all. What am I doing wrong?

    DETAILS
    What are you exporting?
    How are you exporting... QT Movie, Conversion, what settings?
    What drive are you exporting to?
    What version of FCP and QT?

  • Videos start and stop such as iCloud information video

    When I try to use your video for information such as for iCloud the start and stop. Then I hit the arrow again start and stop. Is it my iPad or your video?

    (we are just users, like you.  It's not my video)
    Are you watching a video that has been downloaded to the pad, or are you streaming from apple's or anybody's website?  It sounds like a connection speed issue.  If you are streaming, you need a fast connection, 3 g likely will not work well. Wifi usually works better, but again, is dependant on your speed.

  • Videos start and stop

    watching videos from any sites, news, webcams, apple quick tips, etc-start and stop
    Have iMAC, 2.8, 6Mgs Ram

    3gone wrote:
    Any thoughts about my disconnecting the ethernet cable from the router and going directly to the IMAC from the modem to see if this makes any difference? My network services the IMAC, my wireless printer and occasionally my netbook, which I rarely use.
    Yes!  Good idea.  In fact, this is the proper way to troubleshoot this issue - isolate the problem by first taking the wifi router out of the equation completely.
    Your current speed is in the broadband spectrum, yet it's at the very bottom.  I wouldn't be surprised if you experienced video problems at your current speed - even with your local network working properly. 
    What type of internet service do you have and who is your provider?
    Message was edited by: pianoman1976

  • Audio and Video skipping and jumping

    WUTFDT3   getTV channel is skipping and jumping in the audio and video. It will skip and jump for about 10 to 20 seconds and then be fine for 30 seconds to a minute. Does anyone else have this problem or is it just me

    Your internet connection might be the problem. I am a fellow student also and my school's wireless network is always slower than the ethernet. And also, did you try to watch the TV show while it is downloading? I know it can but I suspect that might be the problem too. (so basically I don't know what is going to too) But if there is a ethernet port on your wall use the ethernet connection and watch it after it downloads completely. You also said that you purchased it twice? You don't have to do that. Email Apple and they should let you download it again for free and maybe they can give you credit for the second download. Here is the link:
    http://www.apple.com/support/itunes/store/download/
    Good luck.

  • Video Plays Back for Four Seconds Then Skips and Stops

    Hi, I have an IMac G5, running on Mac OSX 10.3.9, 2.6 GHz processor, 1.25 of RAM.
    I have edited on Final Cut for over a year, but slowly the performance has declined. It is now so bad that my imported dv files play for 3-4 seconds before the picture freezes, then the audio sputters and the entire clip comes to a stop. At first I thought it was a problem with the hard drive, but after purchasing another Lacie drive, the problem continues.
    I have no idea what to do and I certainly hope my system isn't decaying on me. If anyone has ANY words of wisdom on this matter please let me know.

    trash preferences?

  • Video plays and stops

    When playing videos, the audio will start and after about 6 seconds they stop (video is a picture and does not play).  I can move the time bar to later in the video and hit play again and it will change pictures and play audio for another 6 seconds.  I can't fix it.
    I have repaired quicktime 3 times.   (videos play fine in quick time).
    I have repaired itunes.
    I have reloaded and downloaded latest itunes.
    I have tried the advance options with the directx and safe options in the setup.
    What else can I try.

    Cyberia398 wrote:
    If something is not properly encoded, surely it won't play at all, rather than playing till it's half way and then stopping. Also, if a file is already in mp4 format in your library, trying to 'convert to ipod' will only get you a message that it's already in the proper format.
    In my experience, both of the above assumptions are incorrect. 'Properly encoded' is not an either/or proposition. Sometimes vids can properly encoded but their data rate is just too high for the device in question. In that case, they will likely restart or just stop playing at some point in the middle -- particularly for stuff encoded with a variable bit rate. Also, sometimes only certain types of waveform show a problem with an encoding -- that waveform might not occur until partway through a song.
    Similarly, 'Convert for iPod' will in fact convert a video that is already in MP4, provided that iTunes thinks the data rate is too high. It will re-encode as an MP4 with a lower bitrate. I have verified this myself.
    As for your playback issue, it seems much more wide-ranging than the problem I was originally responding to. I think it might be an unrelated issue. Unfortunately, I don't have any advice for somebody whose iPod has problems playing any video. My suggestions only might apply if the iPod has an issue with a specific video, but continues to play the rest as it always had.
    Good luck with your problem, sorry I couldn't be more helpful.

  • Flash Player - Videos start and stop

    Player:  WIN 10,0,45,2
    Windows 7
    When playing a video - it is constantly stopping and starting.  The two sites that I use are Nascar.com and YouTube.  I have uninstalled, cleaned files, reinstalled, rebooted, and dont know what else to do.  Not computer savey here.

    Streaming video tends to do that - either if your Internet connection is slow, or the server at the other side is slow.
    The only thing you can do about it is to pause the video yourself near the beginning, then let it load to about two thirds or more, then play it.

  • Problem Viewing Youtube videos (skipping and stopp...

    Hi there,
    everytime i go to watch a youtube video the video will do one of a variety of things.
    1. The video never plays it will just show the buffering ring
    2. Videos that are short i.e. 30 seconds or so will start to play 1 or 2 seconds then skip straight to the end
    3. The video plays fine and then pauses repeatedly
    4. The video starts to play and somewhere during the video it skips right back to the start and plays from the beginning again.
    As you can imagine these problems are persistant and extremely annoying to say the least.  I would be very appreciative if anyone could offer any advice to sort these problems out.  I have bt Infinity (if that makes any difference)
    Cheers
    Ru

    Hi there,
    everytime i go to watch a youtube video the video will do one of a variety of things.
    1. The video never plays it will just show the buffering ring
    2. Videos that are short i.e. 30 seconds or so will start to play 1 or 2 seconds then skip straight to the end
    3. The video plays fine and then pauses repeatedly
    4. The video starts to play and somewhere during the video it skips right back to the start and plays from the beginning again.
    As you can imagine these problems are persistant and extremely annoying to say the least.  I would be very appreciative if anyone could offer any advice to sort these problems out.  I have bt Infinity (if that makes any difference)
    Cheers
    Ru

  • Videos skip and are very slow when I play them in anything other than fulls

    When I try to play a video it is ok when it is in the small box in the corner but when i double click and get the video larger it skips alot and play very slow, but when I make the video full screen it play normally. How can I play the video in the mid size box in the right way.

    Crop...
    I'm having the same problem (iTunes 11.02!) .
    I think this one isn't resolved because it IS rare: I've had iTunes on about 7 different machines (Mac and PC) since it begain (2001). In fact I maintain the same library without issues for over 10 years. Anyway this is the first time it's occurred (in my case it's happened on a pretty recent Mac Laptop). But as you may have discovered, google/bing searches for similar problems yeild VERY few results.
    A guy at the Apple store was able to temporarily fix by doing some low level cache removal, that may give a glimpse to the reason, but is not a permanent fix.
    I'm going to try a few things will report back if I have any luck**.
    ***If anyone else want to give it a try: Before starting bookmark the following: http://support.apple.com/kb/HT1391 this describes the location and purpose of most of the iTunes library files. And, any apple support docs on creating a  new iTunes library... I'm unwilling to try the let iTunes "Keep iTunes Media folder organized " cause I have my own organization method.

  • Itunes videos skip and are not synced with sound. Using windows 7.

    Videos are not synced with sound and skip in itunes only, using windows 7. No other video issues, only in itunes.

    It's alright, I don't have a Mac so I get confused too. The option key should be somewhere to the left of the space bar and look like it is trying to represent railway points.
    I don't know how migration assistant works, but presumably it has dumped an iTunes folder somewhere on the Mac. Inside that should be a file called iTunes Library.itl that is the core of the library. Unfortunately iTunes "thinks different" so we can't just double click the file to open it, that opens whatever the "current" library is instead, so you'll need to hold down option (shift for Windows) to get a dialog to choose or create a library. Click choose and browse to the relevant file.
    If iTunes can't play your music at this point and gives the exclamation mark of doom then we need to go back to the Windows 7 library, tweak it up for easy export then bring it over again. Overview here. Customized instructions on request.
    tt2

  • FCE4 - Video starting and stopping

    I imported some DV video from my hard drive into FCE and the playback just stops and starts. I see one frame, then it stops almost as if it is pausing, and then it starts for one frame, then stops...how do I fix this?
    My iMac meets all the requirements, but the only one I am not sure about is this:
    An AGP or PCI Express graphics card compatible with Quartz Extreme
    Does the iMac Core 2 Duo have a graphic card that is compatible with Quartz Extreme? Whatever the heck that is.
    Message was edited by: Freis1968

    >>Why is it that the default setting for a video player placed on the stage
    is to start playing when the page appears? I would think it would be
    paused.<<
    I don't know it doesn't seem any more logical to have it paused. I assume it
    is just a preference on the part of the developers of Flash.
    >>Is there some piece of script that can correct this situation<<
    There are several ways to pause the video playback at teh beginning of the
    Flash movie. It actually depends on how you have the movie inserted into the
    time line. If you used an FLVPlayback component, then all you have to do is
    click to select the component, open the component inspector
    (window>component Inspector) and se the autoplay value for the component to
    false. If you have the video inserted another way let me know.
    >>Forgive my naivete but I am trying to learn the ways of Actionscript
    wherever I can find it and builds something at the same time.<<
    Thats always hard. What tecnology do you normally work with Ajax? C++
    The comment about the behavior of video suggests you work with a technology
    that has the opposite autoplay behavior.
    Jerron Smith

  • DVD - video skips and sound also

    I am running bootcamp on my macbook pro, and when trying to watch commercial DVD's I find that they play great in mac os, but the video and sound skips in windows? I tried playing it in windows media player and real player but still skips The weird thing is it was working fine a couple of days ago!
    Does anyone know what could be the problem? With my PC laptop last year I found it started to happen just before the hard drive failed! Ive only just converted to a macbook and its 3 weeks old!
    Also, please dont suggest I take it to get looked at etc, I bought this over ebay for nearly full price, advertised with '1 year warranty' but the seller fails to tell me theres no reciept. As much as I understand, apple says it has to have a reciept
    I would appreciate anyones help!

    "I am running bootcamp on my macbook pro,"
    You should post your question in the Boot Camp discussions:
    http://discussions.apple.com/forum.jspa?forumID=1165

Maybe you are looking for

  • I am using a new Mini Mac via HDMI, I get the First gray screen then nothing else

    I am a First time user of a Mac and I've gone toturn it on fr the first time today, i conected it to a HD ready LCD tv via HDMI and get the first gray 'loading' screen then an 'English' over the speekers then nothing else Any help would be apreciated

  • Erro message when starting application

    I receive an error message when trying to start Flash Professional CC. It states "unable to start application correctly (0xc000007b). How do you resolve this?

  • Audition CS5.5 - How to go over 100% in Volume Envelope

    So I'm trying to do a simple amplify envelope, with smooth louden and quieting, and the only envelope I can find is the Volume Envelope. But when I try using it, the maximum volume is 100% which is the original volume. The only tool I can find to mak

  • Centro: export datebook & addressbook & memos to new non-Palm phone

    [Cross-posting to Other Synchronization board too, since I'm not sure what sync method I'll need to solve my problem--sorry if that's a no-no!] Howdy- After 10 years of Palm-related PDAs & phone (Palm IIIe, Handspring Visor Edge, Treo 650, Centro), I

  • Why does my time machine backup fail

    my estimated backup size is 228GB (I have excluded files under options in time machine) I have 319GB available on my time machine on a 320GB disk when i try and backup i get the following message... This backup is too large for the backup disk. The b