Videos-Sound plays, Moving image does not.

All of the videos I have from bonus albums won't play the actual video. I get sound and a static image. Files are linked. They're in my iTunes folder. Is this a bug with the upgrade? Do I need to change a setting? They show up in my library but don't show up in the Movies library tab either.

Usually when moving layers between images, one would use the move tool
(click on the image in the document window and drag to the other document)
and hold the shift key down if you want the layer pin registered (aligned and
the images are of the same dimensions) and if the images are of different
dimensions, holding down the shift key centers the new layer.
Added:
MTSTUNER
Message was edited by: MTSTUNER

Similar Messages

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

This pertains to Adobe Premiere Pro CS6:
Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
Not sure I yet have the capabibility of providing a URL of the problem.
Thanks for your guidance,
David

Initial postion of image changed but now image does not move

hi can any one solve this problem please, i have been trying to change the initial position of my image when i run it 1st on java textpad......
i seem to have moved the initial position of the image by the following >
public void paint(Graphics g) {
          g.drawImage(CurrentImage,xPos = 10,yPos = 100,this);but now the image does not move when i press the keys in its new position
does anyone one know how to solve this?? if you do please reply THANK you.
the original code is below >
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.*;
import javax.sound.midi.*;
import javax.swing.*;
import java.awt.Image.*;
public class Man3 extends Applet implements KeyListener {
     int xPos, yPos;
     Image man1;
     Image man2;
     Image man3;
     Image man4;
     Image man5;
     Image man6;
     Image CurrentImage;
     Image offScreenBuffer;
     AudioClip tune;
     public void init() {
          setBackground(Color.white);
          xPos = this.getSize().width/2;
          yPos = this.getSize().height/2;
          man1 = getImage(getCodeBase(),"man1.gif"); // right hand up
          man2 = getImage(getCodeBase(),"man2.gif"); // straight
          man3 = getImage(getCodeBase(),"man3.gif"); // right hand down
          man4 = getImage(getCodeBase(),"man4.gif"); // left hand up
          man5 = getImage(getCodeBase(),"man5.gif"); // straight
          man6 = getImage(getCodeBase(),"man6.gif"); // left hand down
          CurrentImage = man2; // man facing right
          addKeyListener(this);
          requestFocus();
          tune = getAudioClip(getCodeBase(), "Track.wav");
     public void paint(Graphics g) {
          g.drawImage(CurrentImage,xPos,yPos,this);
     public void checkXmin()
               if (xPos == 0) xPos = 500;
     public void checkXmax()
               if (xPos == 500) xPos = 0;
     public void checkYmin()
               if (yPos == 0) yPos = 350;
     public void checkYmax()
               if (yPos == 350) yPos = 0;
     xPos+=1;
     if (xPos>500) xPos=0;
     if (xPos==0) tune.play();
     // man walks right
     public void checkCurrentImageRight()
               if((CurrentImage == man6)||(CurrentImage == man5)||(CurrentImage == man4))
                    CurrentImage = man2;
               if(CurrentImage == man3)          CurrentImage = man1;
               else if (CurrentImage == man1)     CurrentImage = man3;
               else if(CurrentImage == man2)     CurrentImage = man1;
     // man walks left
     public void checkCurrentImageLeft()
               if((CurrentImage == man3)||(CurrentImage == man2)||(CurrentImage == man1))
                    CurrentImage = man5;
               if(CurrentImage == man6)          CurrentImage = man4;
               else if (CurrentImage == man4)     CurrentImage = man6;
               else if(CurrentImage == man5)     CurrentImage = man4;
     public void keyPressed(KeyEvent evt) {
          int offset;
          int x = evt.getKeyCode();
          if (evt.isShiftDown()) {
               offset = 20;
          else {
               offset = 10;
          switch (x) {
               case (KeyEvent.VK_UP):                     // man goes up
                         checkYmin();
                         //checkCurrentImage(2);
                         yPos -= offset;
                         break;
               case (KeyEvent.VK_DOWN):
                         checkYmax();
                         //checkCurrentImage(2);          // man goes down
                         yPos += offset;
                         break;
               case (KeyEvent.VK_LEFT):               // man walks left
                         checkXmin();
                         checkCurrentImageLeft();
                         xPos -= offset;
                         break;
               case (KeyEvent.VK_RIGHT):               // man walks right
                         checkXmax();
                         checkCurrentImageRight();
                         xPos += offset;
                         break;
          repaint(); // display image
     public void keyTyped(KeyEvent evt) {
     public void keyReleased(KeyEvent evt) {
    public void update(Graphics g)
        // Will hold the graphics context from the offScreenBuffer.
        // We need to make sure we keep our offscreen buffer the same size
        // as the graphics context we're working with.
        if ((offScreenBuffer==null) || (offScreenBuffer.getWidth(this) != getWidth()) || (offScreenBuffer.getHeight(this) != getHeight()))
            xPos = getWidth()/2;
            yPos = getHeight()/2;
            offScreenBuffer = this.createImage(getWidth(), getHeight());
        // We need to use our buffer Image as a Graphics object:
        Graphics gr = offScreenBuffer.getGraphics();
        gr.setColor(getBackground());
        gr.fillRect(0, 0, getWidth(), getHeight());
        paint(gr); // Passes our off-screen buffer to our paint method, which,
        // unsuspecting, paints on it just as it would on the Graphics
        // passed by the browser or applet viewer.
        g.drawImage(offScreenBuffer, 0, 0, this);
        // And now we transfer the info in the buffer onto the
        // graphics context we got from the browser in one smooth
}

Not only is this your 7th or 8th posting on this topic, you can't even wait 15 minutes before bumping the posting.
Your question is no more important than anyone elses on the forum and continually posting, starting new threads on the same topic is one sure way to get your posting ignored.

Assigned F key to play an action does not work. Why? Using cs6 iMac and wireless key board

Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6 iMac and wireless key board.
Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

*** Moderator Action ***
This networking question has been moved from the Solaris 10 discussion space,
to the Solaris Networking discussion space, for closer topic alignment.
Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

SVG image does not appear in mobile version but does in desktop version

Hi,
I am new to using Muse and have created only one site before in Muse. I have taken screenshots to show the problem I am having.
I have used Illustrator to create the following logo image that I save out as an SVG file:
As you've probably guessed, I have used clipping mask to insert the marbly purple image into the shapes and text (this may be relevant to the problem, I don't know).
I then save it out as an SVG with the following details as advised by Adobe:
Then moving into Muse, I File > Place the SVG file. 'Unable to generate thumbnail' comes up in both desktop and phone versions:
Regardless, I uploaded to FTP post to my website. While the SVG appears perfectly on my desktop browser, it does not show at all on my phone browser:
This is not only happening on my phone, I have visited the same website on multiple phone devices and still the SVG image does not appear. Any ideas why this is happening?
Have I totally missed something about file formats for mobile browser versions in Muse?
Also- in illustrator, I saved the SVG logo for the mobile version as a SMALLER SVG than the one I saved for the desktop version.
Thanks

Use a PNG file. I see nothing in your logo that would warrant using anything else. You're not scaling it, there is no interaction and all you are doing is masking out some data that is pixels already. Pardon me, but using an SVG makes no sense at all. Beyond that one would need to see the file, but my guess would be that the "responsive" setting once again embeds some garbage data. Wouldn't be the first time...
Mylenium

Image does not display on Webi/Information Analyzer report BO XI 4.O

In Information Analyzer ( Webi ) I am using BO XI 4.0 ramp up version. I have create one report with image on it. I moved the image to image directory on BO server .
While creating the report I am able to see the image fine. However when I call the report from a hyperlink the image does not get displayed.
If I go and refresh the data, then the image comes back.
But I want to be able to see the image without having to refresh the report each time.
I restarted services and removed cookies and cache from IE broweser and tested with many other machines, but still same problem.
Can someone please advice..soon..

Is this a custom application that is viewing the report or is it Infoview or urlreporting?
If it isn't a custom app, you may be better off posting this question [here|SAP BusinessObjects Web Intelligence; instead. You may also want to open a case with support for this.

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

This sounds like a hardware issue. I haven't seen this particular problem reported before.

Image does not appear in applet.

I am reading the book, Teach Yourself Java in 21 Days.
There is an example in Ch.11 that shows how to load an image into the applet.
I have tried to use the code provided as is along with an image as defined in the code. I have also uploaded the html, class and image to a folder on the web. Unfortunately, the image does not appear in the applet. The image does have an image that I created using ms paint.
Here is the code I am currently using from the book:
import java.awt.Graphics;
import java.awt.Image;
public class LadyBug2 extends java.applet.Applet {
     Image bugimg;
     public void init() {
         bugimg = getImage(getCodeBase(),
             "ladybug.gif");
     public void paint(Graphics g) {
         int iwidth = bugimg.getWidth(this);
         int iheight = bugimg.getHeight(this);
         int xpos = 10;
         // 25 %
        g.drawImage(bugimg, xpos, 10,
            iwidth / 4, iheight / 4, this);
         // 50 %
         xpos += (iwidth / 4) + 10;
         g.drawImage(bugimg, xpos , 10,
              iwidth / 2, iheight / 2, this);
         // 100%
         xpos += (iwidth / 2) + 10;
         g.drawImage(bugimg, xpos, 10, this);
         // 150% x, 25% y
         g.drawImage(bugimg, 10, iheight + 30,
             (int)(iwidth * 1.5), iheight / 4, this);
}I tried placing the image in an images folder and I also tried changing the code to getImage(getDocumentBase(), "ladybug.gif")
as well as tried getImage(getCodeBase(), "ladybug.gif") in order to try and grab the image from the same directory as the class file and the html file.
The image file's name is: ladybug.gif
The code in the html file:
<HTML>
<HEAD>
<TITLE>Lady Bug</TITLE>
</HEAD>
<BODY>
<P>
<APPLET CODE="LadyBug2.class" WIDTH=1024 HEIGHT=500>
</APPLET>
</BODY>
</HTML>
I have gotten previous applet examples from the book to work. One of them did have an error in the author's code which I fortunately was able to overcome. This time, I am afraid, the error eludes me.
Thanks in advance.
I do see that there is no start/stop/run in this version, but I believe this should still work because of the init. I am guessing that maybe the problem lies somewhere in there.
Message was edited by:
gnikollaj

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

Image does not load in application

Hi:
I read about the following in a loading image tutorial:
"The getImage methods return immediately, without checking whether the image data exists. The actual loading of image data normally doesn't start until the first time the program tries to paint the image. "
Basically, I am using the
Image img = Toolkit.getDefaultToolkit().getImage(path);I've also overwritten the paintComponent()method
public void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(image, 0,0, myWidth, myHeight, this);
}Then, I included the above code in a JPanel, which is further included in a JInternalFrame. But somehow, the image just doesn't load, the tutorial says, the image does not load until the FIRST TIME PROGRAM PAINTS THE IMAGE. How do I make the program paint the image??
Thanx a lot

Check out ImageObserver, Component.prepareImage() and MediaTracker.

Control mouseover image does not display when contained in an array of clusters.

I have been using system booleans (with some customization) for the ability to impement mouseover animations. For example (default system booleans):
The mouseover feedback works well with my UI, and for the most part everything is going great.
However, the mouseover image does not load if the the boolean is contained within an array of clusters (a single cluster with the boolean inside or an array of booleans works as expected):
The mouseover animation does work for a single array element in the above case (the one which was most recently clicked), but this behavior isn't desirable and it seems buggy if I were to leave this on my UI as it is.
So I guess I'm just wondering if anybody has encountered this or has any suggested workarounds? The few that I've thought of so far (maintain a separate array for any set of system boolean controls, check coordinates myself on mouse move event and try to update the proper element in the array, avoid using mouseover animations entirely for this set of controls) aren't all that desirable. Even though this issue could be considered cosmetic, the UI is very important to me as this code is something shipped to customers.
This is LV 2011 by the way, so if by some chance the behavior in 2012 is correct please let me know (this alone might be reason enough to convert the project up). If there is a CAR ID for this behavior and an NI employee wishes to share it I would also appreciate that.
Best Regards,
John Passiak
Solved!
Go to Solution.

Hey Jason,
A reproducing VI would be any VI that contains an array of clusters with a system control boolean inside. Here's an example:
Single Boolean, Single Cluster, and Array of Booleans all show the proper mouseover image.
Array of Clusters always shows the mouseover effect on the last element which was clicked, but does not show the mouseover effect on other array elements (actually, it seems to be inconsistent--every now and then it does show the mouseover effect on other array elements but it is not at all reliable).
Best Regards,
John Passiak
Attachments:
MouseoverTester.vi ‏9 KB

Image does not display on MacBook Pro (does on PowerBook G4!)

I created a slide in Keynote on my PowerBook G4 with an image dropped in (a pdf, I can't remember whether it was originally cut and past or dragged and dropped in). When transferring the Keynote presentation to a new macBook Pro (copying via a USB thumb drive), the presentation opens but the image does not display (everything else is OK).
The weird thing is that the image does show up in the thumbnail in Navigator View. It disappears in Light Table View, and then is gone when I return back to Navigator View. However, when I close and reopen the file, it appears again in the thumbnail.
When I click on the area where the image should be, the open squares show up around something. If I try to copy this object and past into another application (like Photoshop), I only get a blank image.
I have managed to get around this by laboriously copying the affected images on my PowerBook into separate pdf files, then transferring those files to my MacBook Pro and dropping them into place. However, I know I will find a missing image at some later date, when I no longer have access to my old PowerBook.
How to solve this problem?
P.S. Both machines are running Keynote 4.0.2 and Mac OS 10.5.2.

Thanks for taking a look!
The original image was created using Photoshop to cut out an image from a pdf file. Then it was either cut and pasted or dragged into Keynote.
Here are screenshots of what I get when I open the "droppedimage-17.pict" file (shown in the Show Package Contents window) using QuickTime on both machines. For the PowerBook:
http://www.cems.umn.edu/download/attachments/Powerbook.png
For the MacBook Pro:
http://www.cems.umn.edu/download/attachments/MacBook_Pro.png
Strangely, the Powerbook version looks like a correct grey-scale image, while the MacBook Pro looks like a B&W image.

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

Photo/Edit-In CS6. psd image does not show in LR after save/close.

Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
If the behavior you describe follows a <save> in CS6 it is not normal.
This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

About Help image does not appear

RoboHelp X5.2 Webhelp output
A logo created as a jpg to be used as an About Help button
will only appear when compiled on my hard drive.
I got rid of the powered by Robohelp button and created a
company image in jpg format for the About Help button.
In my project I double-clicked on the skin, and then the
About Button, selected the jpg for the About Button image, selected
a gif to use in the About Help dialog box, added company
information, company name, etc.
Part of skin code ----------------
<toolbaritem mode="Logo Mode" type="built-in-logo"
id="7">
<name>About</name>
<image>selected:napa_logo_blue.jpg?</image>
I compiled to my local drive. Everything works. The jpg logo
appears on the top right-hand side, and when you click on it, the
About Help dialog box opens with the gif image and other
information.
However, the development team compiled the help along with
the application to one of their test boxes. The jpg image does not
appear. Instead, a small white box with a red x and the words About
Help appears. When you click on this the About Help dialog box
opens with all the correct information including the gif image.
Both images reside in the skin folder on my hard drive. When
I compile the project they reside in the main folder with all the
htm files and js files.
Not sure how to resolve this.
DM

I am also having this problem. I've just converted a project
from RH X5 to RH v7. In X5 the .gif file attached to the About
button worked fine. In RH 7 nothing appears. I've tried adding the
.gif to the Baggage files but it's still broken. Any other
suggestions?

Videos-Sound plays, Moving image does not.

Similar Messages

Maybe you are looking for